Session state can only be used when enablesessionstate is set to true.

When I try to open up a certain webpage it says; Session state can only be used when enablesessionstate is set to true. What does it mean and what should I do?

Contact the webmaster for that site and report the problem.

Similar Messages

ASP Web Forms Error: Session state can only be used when enableSessionState is set to true

Hello,
I am developing a custom application page for a custom Web Forms I am creating, which I plan on using for custom task form into SharePoint 2010 Foundation.
Currently, I am trying to test it in Debug Mode using Visual Studio 2010 but when I am trying to use Sessions I get the error:
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration>\<system.web>\<httpModules> section in the application configuration
I've already done this on trying to fix:
On my page
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="TestForm.aspx.cs" Inherits="TestForm" EnableSessionState="True" %>
And on my web.config
<pages enableSessionState="true">..<httpModules>
<remove name="Session" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</httpModules>
Note: I am getting an error when I try to add <module> into web.config
ASP .NET State Service is currently running.
And the part where it keeps error is when in PageLoad, I try to set a List object something like this:
List<object> myobject
get
if (Session["object"] == null)
Session["object"] = new List<object>();
return Session["object"] as List<object>;
set
Session["object"] = value;
protected void Page_Load(object sender, EventArgs e)
myobject= new List<object>();
BUT the error still persists! I also try to restart IIS but still the error still happens.
I am running out of ideas so can you help me out?
Thank you!

Could be your skype intercepting your requests at 80 port, in Skype options uncheck
Or Your IE has connection checked for Proxy when there is no proxy
Or your fiddler could intercept and act as proxy, uncheck it!
Solves the above problem, It solved mine!
HydTechie
HydPhani

AIR 3.8.0.440 / iOS: build fails with "ld: -pie can only be used when targeting iOS 4.2 or later"

With AIR 3.8.0.440, iOS build with "adt -package -target ipa-ad-hoc" fails with a linker error:
ld: -pie can only be used when targeting iOS 4.2 or later
What's the correct option to suppress this error or does it need a fix for adt?
In the app.xml,
<key>MinimumOSVersion</key>
<string>5.0</string>
is already present in the iPhone InfoAdditions section.
(Building the same app with AIR 3.8.0.370 is fine)

Hi,
Can you make sure that both your old ane and new ane are not present in your extensions directory.
Also, how are you zipping/unzipping the ANE?
If you are on a Mac, try these steps on the terminal:
1) Create a new temp directory, say temp (mkdir temp)
2) cd temp
3) Copy the ane you need to make changes to into this directory.
4) unzip nameofane.ane
5) rm nameofane.ane
6) Make changes to the platform.xml file using a text editor or vim
7) cd to the temp directory again, (if you are now elsewhere)
8) zip -r nameofane.ane .
9) Copy the ane file created into your extensions directory, where you have placed the other extensions and then, package the IPA using adt.
If you are on Win,
1) Rename the .ane to .zip
2) Extract the contents of .zip
3) Make changes to platform.xml and save it.
4) Go back to the directory where you extracted the files, select all the folders/files and right click to zip them back.
5) Rename the .zip to .ane and then, package the IPA.
It should work.

Problem with ANE - "ld: -pie can only be used when targeting iOS 4.2 or later"

I'm trying to compile a simple AIR Mobile app for iOS, incorporating an ANE to support Localytics
http://flashsimulations.com/2012/06/18/localytics-adobe-air-native-extension/
Compilation fails with the message "ld: -pie can only be used when targeting iOS 4.2 or later"
Surely 7.0 is later than 4.2! (I'm using Flex 4.6 - AIR 3.9 SDKS). Tried building with FDT and with Flash CC, and against earlier versions of the iOS SDK (6.0, 5.0).
Any suggestions?

thanks, but can you be more specific? Presumably I add something in this part:
    <iPhone>
        <InfoAdditions><![CDATA[<key>UIDeviceFamily</key>
                                              <array>
                                                  <string>1</string>
                                                  <string>2</string>
                                              </array>
                                              <key>UIStatusBarStyle</key>
                                              <string>UIStatusBarStyleBlackOpaque</string>
                                              <key>UIRequiresPersistentWiFi</key>
                                              <string>YES</string>]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>

Can getGeneratedKeys() be used when executing batches of statements?

Hi all,
this question was posted in this thread:
Can getGeneratedKeys() be used when executing batches of statements?
but unfortunately I didn't find the answered appropriate.
That thread is now locked, so I would like to start it again here.
This is a summary of the other thread:
Can you retrieve keys generated by a batch of insert statements? The following code produces an ArrayIndexOutOfBoundsException from the Oracle T4CNumberAccessor.unmarshalOneRow() method (see stack trace at the bottom of this message).
The code is:
String sql = "INSERT INTO FOO (ID, NAME) VALUES (FOO_SEQ.NEXTVAL, ?)";
String generatedColumns[] = {"ID"};
PreparedStatement pstmt = connection.prepareStatement(sql, generatedColumns);
pstmt.setString(1, "A");
pstmt.addBatch();
pstmt.setString(1, "B");
pstmt.addBatch();
pstmt.setString(1, "C");
pstmt.addBatch();
//EXCEPTION OCCURS HERE
pstmt.executeBatch();
The exception is:
java.lang.ArrayIndexOutOfBoundsException: 22
at oracle.jdbc.driver.T4CNumberAccessor.unmarshalOneRow(T4CNumberAccessor.java:190)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:610)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:955)
at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10580)
The only answer given was:
"You should directly specify how big your batching is. For that reason you may use ExecutionContext where you can set setBatchingLimit(int) and setBatching(bool). This operation will tell execution context the size of supposed batching and also should be batching performed at all or not. You can add batching jobs but you can not execute the jobs without proper initialization of batching job size - it will fail with out of bounds."
ExecutionContext is not something I found in jdbc drivers, so I'm a bit confused about this answer.
Did anyone solve the problem?
Thanks,
Michele

>
We have the same problem. No solution so far.
>
I never found a definitive solution but testing seems to show that this is not possible.
There is no code that can be written to get the generated keys if batching is used.
This is because the 'getGeneratedKeys' method must be called on the prepared statement and would return the generated keys as a ResultSet object. But when batching there is only one prepared statement but multple sets of parameters, one for each batch entry.
Thus there could only be one call to 'getGeneratedKeys' since there is only one prepared statement. This strongly implies that it is not possible to use 'getGeneratedKeys' when batching.
See Retrieval of Auto-Generated Keys in the JDBC Dev guide
http://docs.oracle.com/cd/B19306_01/java.102/b14355/jdbcvers.htm#CHDEGDHJ

How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

I have an iphone4 and i can only hear calls when i use speakerphone. I'm trying a master reset but how do i back up my contacts from my address book??

I have an iphone4 and I can only hear calls when I put them on speakerphone. The people I'm on the phone with can hear me I just cant hear them. I am about to try a master reset but how do i backup my contacts from my address book? Does itunes do that when i backed up the rest of the stuff on my phone?

Back it up in iTunes! Just make a backup of the entire device but make sure you check sync contacts and the option to add contacts from phone to address book on computer.

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

Re: "Item category K can only be used without account assignment"

Hi,
while creating PO from PR the following error is coming.
"Item category K can only be used without account assignment"
How to solve this
Regards,

Hello,
Item category K cannot be used with an account assignment as the goods are not physically used in the company. The stock is stilla consignment stock and belongs to vendor. Using an account assignment will book the cost in the company's expenses.
use an account assignment if required when you transfer from consignment to own stock.
Hope this helps,
Regards,
VS

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

Item category S can only be used with account assignment category

Hello Gurus,
When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
for my plant and material.
Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
I think there is a problem in plant or a material.
Please help me.
BR

Hi,
How you are creating PO ,so that you have error "Item category S can only be used with account assignment category"
Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for with account assignment category.
Cross check transaction variant or screen variant used for your PO creation!
Regards,
Biju K

Alternatives can only be used once?

Hi
In the Adobe form when creating an alternative I've discovered that it can only be used once.
Is this correct?
I've created an alternative e.g. name = FLAG_IS_X condition flag = X.
When I use the alternative 'FLAG_IS_X' the first time it works as required.
However, when I use it a second time on the form it does not work at all.
Does this mean that a different alternative with the same condition has to be created even though the condition you want to use is the same?
Thanks

Hey,
Well I stumble it seems on the same 'issue' . I have 3 master pages and have the requirement to put a watermark on it depending on the status. The first master is in portrait and contains the contact details, the second master page contains the line items and is in landscape and the third one contains the totals and is back portrait.
First I had only one alternative and used it on the 3 masterpage to check if the watermark had to be printed. In this case it was only correct for the first page (contact-info) the rest all received the mark although they should not.
Then I made 3 altenatives (one for each type of master page) all checking the same condition.
This way it was correct for page 1 (contacts), the first page of the items (the two others had the watermark although they should not - so not correct) and the last page with the totals.
In my case the contacts-page and totals-page can only have a page-count of 1 but I'm almost sure that if they could have a page count of 2 or more then only the first page would be correctly printed.
Is this a bug you think?
Faaiez,
Did you find in the end a workaround for this?
Otto.
Any suggestion of how I could handle this with scripting (no experience with scripting though)
Anyway tnx already for all the input !!
best regards,
Bart V.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its sasy the cose can only be used once. I dont have the movie and now i cant get it at all.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its says the code can only be used once. I dont have the movie and now i cant get it at all. i paid for it when i bought the movie but now i dont own it at all. i feel cheated, somebody please help!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I can only hear caller when I switch to speaker on iphone. The caller can hear me. Everthing else works as normal.

I can only hear caller when I switch to speaker on iphone. The caller can hear me. Everthing else works as normal

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

Session state can only be used when enablesessionstate is set to true.

Similar Messages

Maybe you are looking for