Problem with IMPORT FROM DATABASE

Hello Members,
      I have a program which reads content of INDX table (cluster table) using
IMPORT tab = lt_ccris1 FROM DATABASE indx(xa) TO wa_indx CLIENT
sy-mandt ID 'DETAILLIST'.
sy-subrc return is 0.
But internal table lt_ccris1 is not populated. I expect entries to be populated here as there is an raw data entry in the INDX - CLUSTD field of database.
1)   Also I am intereseted to knoe where is the data exported to this INDX table? Usual searches does not show any export statement.
2)   Is there a FM which can directly read content of INDX table?
        Your help is much appreciated.

Hi Thomas,
Thanks for the reply.
//How do you know your IMPORT syntax must look exactly like this? //
I did not write this custom report and IMPORT statement is exactly the same as I have given. It is correct as per syntax.
In SE16 INDX does contain an entry for the given key.
I searched for EXPORT stmt in varall ways including debugging (Please note there is a SUBMIT <program> before IMPORT and if at all there is an export it should be in there). Could not find from debugging as well.
RS_ABAP_SOURCE_SCAN does not exist in my 4.7.
Regards
Ram

Similar Messages

Problems with import from textfile

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

Problem with "import sabasrv.database.*;"

Hi there..
I am new to the Java game so this is probably a very easy problem to fix.
I am using the Forte IDE and My code has the following imports :
package sabasrv.user;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.SQLException ;
import sabasrv.database.*;
The problem is that whenI try to compile I get the following error:
src/sabasrv/user/User.java [8:1] Package sabasrv.database. not found in import.
import sabasrv.database.*;
^
src/sabasrv/user/User.java [16:1] Class DbSql not found in type declaration or import.
DbSql sql ;
^
2 errors
Any ideas why I am getting this? My CLASSPATH environment variable is :
CLASSPATH=C:\jdk1.1.8\jsdk23.jar;C:\old_Saba_servlet\src\sabasrv\database
I hope this is enough info to go on.
Your fwend.
Korwin

You classpath should probably be
C:\old_Saba_servlet\src
instead of
C:\old_Saba_servlet\src\sabasrv\database
if you have classfiles in that directory and not just the source files. Try that. The package name is "appended" to the classpath, so sabasrv.user will be /sabasrv/user when it looks for class files in that package.

Problems with Import from Kodak Zi-8

Hello,
I do not manage to import the movies I shot with my Kodak Zi-8 videocamera on Final Cut Express (version 4.0.1).
I can play these normally on Quick Time and can import them without any problem on I-Movie, but not on FCE.
Anyone can help?

Media from this camera will not work in FCE. It needs to be converted. You can use MPEG Streamclip to do this. I can't tell you how to convert it without knowing the exact specs of what you shot. Open a clip in the QT player and report what it says in the movie inspector.

Problems with importing from DV

I'm going around in circles trying to figure out why I can get a preview of the content off my JVC DV camcorder (gr-dvx4) but iMovie just will not import the contents. I hit the impotr in either Manual or Automatic mode button, the film plays on the camcorder screen but its not registering with iMovie, it just shows a blue screen which says 'importing' but nothing is happening! Argh! Someone help!

I had exactly the same problem but with only with a tape that was recorded using another dv camcorder than the one I am using to import into iMovie'08.
Now this is very very weird, especially given that the import works perfectly with QuickTime Pro (see workaround base on QuickTime Pro hereafter). In other words, this is a serious bug of iMovie'08, as I saw many threads on this forum referring to this problem.
So much for "easiness of use of iMovie'08"...
Anyway here is a workaround that worked for me based on QuickTime Pro. Of course, you will have to purchase it...
So, first import your movie from the camcorder using Quicktime Pro in *raw dv format* (see Quicktime preferences, under the importing tab). And then import the files from you harddisk into iMovie'08. Unfortunately, you are loosing dates associated with clips, but you can always set them aftewards using the techniques described here:
http://imovie08.blogspot.com/2007/09/how-to-change-date-for-dv-event-footage.htm l

Problems with "import from catalog" & "collection type mismatch"

I'm attempting to keep 2 catalogs on 2 different computers sunchronized. I'm exporting photos
and collections (actually a web gallery) from one computer to another, and
I'm getting a "collection type mismatch" error, that prevents the photos from being a
dded to the collection. I've exported and imported the flash gallery template
from one system to the other to make sure the templates were identical. A
ll the photos, keywords, and attributes seem to be imported properly, but the photos aren't added
to the collection. Anyone having success exporting/importing collections between computers?
I'm using LR 2.7 on Win 7 & Vista.
Thanks,
Mark

Thanks Dorin. I tested it with a "regular" collection, and it works.
I hope they fix this in v. 3 too!

Problem with import from Onlocation to Premier Pro CS5.5

i noticed that in upgrading from Production premium CS 5 to production premium CS5.5 when one imports a shoot schedule from on-location to premier pro the import to premiere pro no longer convert to the more relevant name created in OL. Ie. if the shot in OL was Smith Tummy Tuck - when you import via the media browser - using the readable OL file - the file imports as 00036.mts - in CS5.0 it would import with the OL file name ie. Smith Tummy Tuck
This was a great feature but what happened to it in 5.5?

most recently it was all within CS 5.5
I am going to go back to another computer that has CS5 and see if I can figure anything out -- seems strange that this would have been dropped by adobe cs5 to cs5.5 in fact in the CS 5 product evangelist promo this was feature highlighted!
I know when I 1swt started with CS5 in Feb 2011 this finctionality worked without an issue

Fish-Eye Problem with importing from Nikon p330

Hi There,
I'm new to the forum.
I've a Nikon P330.
When I shoot in RAW (NRW). Then Aperture makes my photo realy strange.
When I shoot in NRW + Fine and I import the NRW and JPEG in to Aperture there is no problem. They look like the picture bellow.
After importing; when I select the picture of de NRW version it first shows like the above picture; but after it stops loading it looks like the picture bellow!
I check the internet but I can't find why Aperture is doing this to my RAW pictures.
Please help me.
FYI
- no plug-inst installed
- working with full updated Aperture
Thx.

Very simple, Nikon does some extra processing to account for lens distortion, the raw file does not have that correction. You will need something like the PTLens plug-in.
ETA: The reason it looks OK initially is that it is showing the JPEG preview with the correction applied.

IMPORT from database with dynamic parameter list

Hi Gurus,
Iu2019m having problems during import from a cluster table.
I wanu2019t to do an import with a dynamic parameter list, but I cannot get it to work.
Sample code ********
DATA: BEGIN OF st_key,
report LIKE rsvar-report,
variant LIKE rsvar-variant,
END OF st_key.
DATA dirtab1 LIKE cdir OCCURS 10 WITH HEADER LINE.
DATA dirtab2 LIKE cdir OCCURS 10 WITH HEADER LINE.
st_key-report = 'ZPRG'.
st_key-variant = 'VAR1'.
IMPORT DIRECTORY INTO dirtab1 FROM DATABASE vari(vb) ID st_key.
IMPORT DIRECTORY INTO dirtab2 FROM DATABASE vari(va) ID st_key.
DATA: tmp_var(100) TYPE c.
This works - P_BWTAR is a parameter from the selection screen registred in VARI
I'm getting the content of the field in tmp_var
IMPORT p_bwtar TO tmp_var FROM DATABASE vari(va) ID st_key.
This does not work - the parameter P_BWTAR is in the dirtab2-name
I'm not getting the content
LOOP AT dirtab2.
IMPORT dirtab2-name FROM DATABASE vari(va) ID st_key.
ENDIF.
ENDLOOP.
I have tried the syntax IMPORT (dirtab2-name) ........
but this fails the syntax check.
Please - if you have any suggestions :o)
Best Regards,
Vibeke

Dear Vibeke,
Could you please explain us how you solved the problem because you have the same issue ?
thanks a lot
KR
véronique

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Data Modeler: Problems with importin from DDL and Designer

I have a few problems with importing models from Designer and DDL:
1. Can I import spatial indexes from Designer or DDL file? An index does appear in the model but it doesn’t seem to be a spatial index. When trying to import from database, the index doesn’t appear in the model at all.
2. Is it possible to import sdo_geometry data types from DDL file? I haven’t succeeded with it, instead the column's data type appears unknown.
3. Sometimes import from DDL files (that are generated with DM) failed with nothing appearing to the model. I haven’t figured out why that happens. I didn’t receive any error message, the model just opened empty.
4. DM doesn’t seem to recognize public synonym creation from DDL. View log gives the following message:
<<<<< Not Recognized >>>>>
CREATE PUBLIC SYNONYM TABLE1
FOR TABLE1
5. Sequences lose their properties when importing from Designer. They only have a name but but start with, increment by and min/max values are empty in DM. Importin from DDL works fine.
I’m using data modeler version 2.0.0 build 584

Hi Alex,
There is newer version of Data Modeler (3.0 EA2) and it is free
You can download it from here
http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-downloads-185792.html
Regards
Edited by: Dimitar Slavov on Dec 9, 2010 2:15 AM

There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?

Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

Issues with importing from excel

I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.

On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.

Problem with IMPORT FROM DATABASE

Similar Messages

Maybe you are looking for