Problem with Sender in RFx emails

Hi Folks,
I have some problems in sender of RFx documents.
The e-mail of sender is the buyer e-mail, but in sometimes the system
use the WF e-mail for send smartforms.
I checked in SOST, and sometimes the sender and email is correct sometimes no.
Can anyone please tell me how I can solve this issue?
Regards and tks a lot!

Hello,
The SRM system uses Smartform BBP_OUTPUT_COVER to create the content of e-mails sent to bidders.
I feel current setting is,
Sender: E-mail address of the last user to change the document
You can look at the option of using
Sender: E-mail of the user created the document.
Useful Transaction SPPFP / Program RSPPFPROCESS
Hope this helps.
Thanks
Ashu

Similar Messages

Why is there more problems with sending photos in emails than before. I never had problems before.

I am having problems that I never used to have sending photos in a Yahoo email. I can't load as many photos and it takes a very long time to load. I always check my attacment by going to the sent file and when I download a photo it is way bigger than the screen and I have to zoom down to 20% in order to see the photo at it's intended size.

Larry HN~If you want to control the size of the photos select them in iPhoto and export to a desktop folder using the various size options available during export - then attach to your e-mail from the folder
I followed the above instructions and it worked very well. I found I could click on the photo in iphoto and drag it to the desktop as well and then attach to my email from the desktop. If I choose the export method I can choose a different size as there are 4 sizes to choose from and that seems to work well for Yahoo Mail altho I noticed that the larger size photo I chose the longer it took to download as an attachment in a Yahoo email.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

After updating to the new ios5 with my 4S , no wifi connection (at home), problem when sending or receiving email

After updating to the new ios5 with my 4S, no wifi connection and problem when sending or receiving email. I had no issue before the update... I am very disappointed

Did you already try to reset your network settings in Settings/General/Reset?

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

Problems with compressed words in emails sent through Outlook in Office for Mac 2011

I have had problems with sending emails through Outlook both when:
1) I copied text from a Word document and pasted into an email.
2) I shared as HTML and sent an email.
The problem I experience is that emails are received with random spaces dropped, such that words get merged together.
I have spoken with Microsoft and have been told that problems with the copy and paste from Word into Outlook is a known issue.
However, I have been told that I should be able to "Share as an HTML" in an email without issue. However, the very same problem exists.
Now I am told that this may be a problem with my documents. However, I have had a colleague use my docs in the same way in Outlook on his PC without a problem. The other possibility I am told is that possibly I have a problem with my OS.
Have others expererienced the same problem?

Is your Outlook window formatted as HTML or text only? A word file has formatted text. If you want to copy only the text from your Word file, you should make a detour over a TextEdit window, or if you have BBEdit like follows:
Copy your Word text, paste it into a TextEdit window - in this window you have to make a command first SHIFT + COMMAND + T if you have a window allowing formatting ("rich text"). Copy it once again - all the Meta formatting from Word are eliminated now! - and paste the text into your Outlook Window.
If you want to send an HMTL Email, I am not sure, whether a copy and paste between Word and Outlook will work. This would mean, that the copy and paste should transform the Word-formatting into HTML-formatting fit for Outlook. Perhaps some others could answer this question.
marek

Problem with contact list in email w/ 3.0

After upgrading to 3.0 I'm having a problem with the "To" in emails. I start typing in a name in the "To" field and it does not bring up matching entries in my contact list (it used to do so with the previous version SW).
I have to try to send the email at which time an error message comes up. I have to cancel the send, delete the name in the "To" field and type the name in again. The second time it brings up the contact list and eveything works fine.
Anyone else having this problem?

Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db

Problems with sending attachements.

Hello I've a problem with sending attachments.
I've got mail Version 5.0 (1244.2/1244.3) and Hosted Exchange (xs4all in the Netherlands). Most of my mail works fine (sending and receive mails).
The most irritating problem is I cannot send messages with a attachement even 1 KB.
Hope anyone can help?
Ohter synchronisation Calender & contacts are even not working fine - but a cable will help. So if anyone can help there to, I will be happy.
Thanks Vanessa

Im having same problem with BTINTERNET account email, tbh ive had issues with this from the start. keeps going on about yahoo *** is that about... could do with someone verifying settings ive done what all the website says but same issue....attachment is only 11.7mb surely thats not an issue.......anybody know whats going on????

Problem with complete task via email

Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan Petrla

Hi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

expresslane.apple.com to get a hold of itunes to reset them by email the only way

Problem with sending sms - nokia x3

Hello,
I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
Could somebody help me, please?
p.s. Sorry, but my english isn't well. I hope the post is understood

Check if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect

Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

Problem with Sender in RFx emails

Similar Messages

Maybe you are looking for