Query selection screen not poping

Hi BWers,
I have a query, which is running correctly when I run it though RSRT. Also it run fine when I open the query in query designer and execute (it picks up the same standard web template). But when I run the same in BEx, it never pops up selection criteria.
I am on 2004s support pack 13. The BEx is frontend is at pack 13.
Thanks,
Raju

Hi Raju,
Try to run the query with support pack 14 (BEx Frontend). Create a workbook and save it. Then you can be able to run it in support pack 13 and 14.
Hope it helps

Similar Messages

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

BEx query selection screen takes long time to popup

Hi,
I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
I have run the statistics of the query and according to the statistics report the query takes a lot of time for the following component :
OLAP: Query Gen. 2681,312682
I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
Please advise how to proceed.
Thanks in advance,
Arash

Hi,
Please check the following notes which should be useful.
1387593 - Performance optimization for query change/generation
1416737 - Performance optimization for query change/generation(2)
1396485 - Performance optimization for query check/save
Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
1472915, 1506560) and repair/correct the different tables to optmize
the query definition tables.
Regards,
Amit

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

Query Selection screen field validatoin

I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
How can this be achieved ?
I tried looking for exits but did not find a relevant one.
Thanks in advance.

Hello,
You need to write a routine in SMOD for selection screen validations.
It will come in i_step = 3. please refer foll code as example:
The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
DATA: LI_VAR like rrrangeexit,
       wa_t_var_range like LI_VAR,
       count type i value 0.
IF i_s_rkb1d-infocube EQ 'CUBE1' or
   i_s_rkb1d-infocube EQ 'CUBE2'.
Check whether only one of date variable is entered in variable screen.
IF I_STEP = 3.
    Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
      if wa_t_var_range-low > sy-datum.
        CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
          EXPORTING
            I_CLASS = 'RSBBS'
            I_TYPE   = 'E'
            I_NUMBER = '000'
            I_MSGV1 = 'Enter date less than or equal to current date'.
        raise again.
      endif.
ENDIF.
ENDIF.
Regards,
Shashank

Query Selection Screen restriction

Hello All,
In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
Can this be achieved? If yes how.
Regds,
Shashank

Hi,
You can try out, customer exit with I_STEP = 3.
using which a exception will be raised if user enters value for more than one variable.
Hope it helps......
Regards,
Umesh.

Check box in SAP Query selection screen

I want to keep 2 check box in SAP Query selection screen.
could you please tell me any one.
regards,
kumar

Hi Vijay,
If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
You can find the name of the generated program of the query when you execute the query.
Reward points if useful.
Regards,
Atish

Analysis Authorization : Selection screen not appearing for query

Hi,
I am facing an issue with analysis authorization. I have created the new roles and assigned to the users. For one user when I am executing the query, the selection screen is not coming up and it shows error message to specify the variables. Whereas its running for all other users.
In S_RS_COMP I have selected Type of a reporting component as Query View, Query & Template structure. I also tried adding Variable in this field but that also did not help.
Please let me know if you have faced similar issue.
Regards,
Manish

Hi,
Go to your query desinger opend your query and select your variable in that you have see first "Ready Input Query" Check box is selected or not. It's not selected you can select that check box.
Your problem will be sloved.
Thanks & Regards,
venkat.

HIerarchy Variable in Selection Screen not taken into account.

Hi,
Our users choose a cost center hierarchy in the selection screen and run the report. As we have suppressed Unassigned Nodes, they do not appear. However when users then deactivate the hierarchy, unassigned nodes are shown. Their argument is that the unassigned nodes should still not be displayed because a hierarchy was entered on the selection screen. Is there a way of stopping this?
Thanks

Hi Shawn,
I think I get what you did in your query, though it took me some time...
Did you select the cost center in your query and set the display hierarchy using settings, hierarchy tab, select hierarchy, hierarchy variable (or something like that)? That would explain why the query isn't filtered on that hierarchy, only the display of cost elements is affected. You should also have the same hierarchy variable in your filter settings in the query designer. That way, the user filters on a hierarchy and the unassigned nodes will never be in the result.
Hope it helps, tell me if I got it wrong,
Kind regards,
Alex

Sorting Currency conversion Variables in Query Selection screen

Hi Experts,
I have an issue in sorting variables.
A Currency translation is used here which has two selection options here, one for "Currency" and one for "Currency conversion date". They just pop in somewhere in the selection screen with out order. I want to put them together either in the middle or at the bottom.
They are not visible in the Variable sequence tab of query properties.
I changed the text for each of them (Ex. "XCurrency"), so that it sorts alphabetically, but no difference.
Had anybody come accross this issue before.
regards
G Rai

Hi,
This seems strange that the variable does not show in the query properties. One thing I can suggest it to try changing the technical name/desciption of the variable if that changes the order.
Please update back the thread if that helps.

Addition of checkbox and 2 fields in ABap query selection screen

Hi
I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

SQ01 - Include a check box on ABAP query Selection screen

Hi Experts,
For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
Please tell me how do i do this.
Thanks
Venkata Pradeep.

In infoset, Extras code tab
Code section: At selection-screen output
Do something like below:
IF radiobutton1 = 'X'.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
               screen-input = '1'.
               screen-invisible = '0'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ELSE.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXX'.
               screen-input = '0'.
               screen-invisible = '1'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ENDIF.

Validate plants selected in Abap Query selection screen

Hi Everyone,
I have a requirement wherein i have to validate 'authority check' for the plants populated in the selection screen in an already created abap query.
I tried adding code in the code section. But i dont know how to use the select-option parameter. It already exists(VBAP-WERKS) in the table which is used for join, so i cannot add it in the additional fields. Am i correct ?
Also, i saw that the report program for this query uses this parameter sa SP$00008. I tried using it but it gives an error The IN operator with "SP$00008" is followed neither by an internal table nor by a value list.
Please help.
Also, please advice whether this requirement can be catered in this query alone? or should i go with writing a new report program for this? ( i personally feel that this would beat the purpose of using Abap Query. )
Regards,
Tarun

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Checkbox in the ABAP query selection screen

Hi experts,
The reqiurement is to add checkbox(parameter name: EX_ZE_ST) to the selection screen of the query and if its checked then the records with the quantity = 0, should not be displayed in the output.
I added a check box and now my issue is, how to suppress displaying the record having quantity = 0.
that quantity field is a custom added field and in sq02 i selected that quantity( Z_HANDQTY) field and gone into the code for the same and wrote below code...
the total generated table view for this query is : marav
if EX_ZE_ST = 'X' and Z_HANDQTY = 0.
break-point.
clear: marav, Z_MATDESC, Z_MATGRPDESC, Z_TAXIND,
        Z_TAXTYPE, MARD, MARD-LGPBE, Z_PREVMATNR,
        Z_CSTTOTAL, Z_CSTUNIT, Z_VSTOCK.
        FREE MEMORY ID 'AQLISTDATA'.
endif.
But still i could see a blank line in the output if that record has quantity( Z_HANDQTY) = 0.
Thanks in advance...
Karthik

hi,
Try this wa y...
if EX_ZE_ST = 'X' and Z_HANDQTY = 0.
break-point.
clear: marav, Z_MATDESC, Z_MATGRPDESC, Z_TAXIND,
Z_TAXTYPE, MARD, MARD-LGPBE, Z_PREVMATNR,
Z_CSTTOTAL, Z_CSTUNIT, Z_VSTOCK.
FREE MEMORY ID 'AQLISTDATA'.
Continue.
endif.

Infoset-query-selection-screen-default-values

Hi All,
I am having the requirement as I need to put default values in the selecion-screen of the report by using Infoset query. Let me know the settings required for this.
I am using SQ01, SQ02, SQ03 T.Codes.
And I need display one record only if any field contains mulitple records, for example in the HR-ABAP, field p0105-usrid contains multiple values depending on the subtype.So, I need to display USRID when URSTY = '900'. All these should display by Infoset query only.
Pls help me in this scenario , its an urgent requirement.I am very much thankful for you for reading my proble, if you will provide some sort of solution, I feel very happy.
Advance thanks for this .
Regards,
Prakash.

Prakash,
To default the values on your selection screen, you will need to do some ABAP I guess. (if you do not want to use variant). Open up the infioset in SQ02 and then goto code option for the PNP**** field and then you can code to initialize the selection screen variables. Test with an ABAPer.
To display multiple records as multiple columns, you will have to create custom fields in infoset, and then go from there. Again see ABAPer.

Query selection screen not poping

Similar Messages

Maybe you are looking for