Reading system profile parameters programatically in ABAP

Hi,
Does anyone know how to read system profile parameters like icm/host_name_full using ABAP?
Thanks in advance!
Regards
Erick

You can use the following code to get the values. Really it is just reading a file which is stored on the application server.
report zrich_0001.
types: begin of tpar,
       status type sy-index,
       name(60) type c,
       user_wert(60) type c,
       default_wert(60) type c,
       end of tpar.
data: par_usub type table of tpar with header line.
data: par_sub type table of tpar with header line.
call 'C_SAPGALLPARAM' id 'PAR_USUB' field par_usub-*sys*
                      id 'PAR_SUB' field par_sub-*sys*.
loop at par_usub.
write:/ par_usub-name(30), par_usub-user_wert(20),
          par_usub-default_wert(20).
endloop.
Regards,
RIch Heilman

Similar Messages

Accessing Exchange Profile Parameters programatically (using Java/ ABAP)

Hi All,
Exchange Profile parameters can be accessed using the URL http://<server>:<port>/exchangeProfile
Does anyone know how to access 'Exchange Profile parameters' programatically. (from java).
Code snippet for the same would be of great help.
Regards,
Siva Maranani

Hi,
Is there any way to access exchange profile parameters using Java?
I need to access exchange profile from an UDF.
Thanks in advance.
Pedro Leal

WD ABAP - Reading the URL Parameters for FPM application

Hi,
As per the Custom requirment,
I want to pass URL parameters for WD ABAP application (sap/bc/webdynpro/dbm/app_veh_cus_search) which uses FPM.
example: sap/bc/webdynpro/dbm/app_veh_cus_search?Customer=12345&fromExternal=true
I am facing difficulty in reading the URL parameters.
How to read/get the URL Parameters for an FPM WD ABAP application????
Observation:
I tried reading the parameter in Window --> HANDLEDEFAULT method. But could NOT read the Parameters from here for FPM application whereas if I create a Z Custom application then I could read the URL Parameters. so the issue is in reading the URL Parameters for FPM application.
Kindly support
Regards,
Hussain

Hi Hussain,
You can do this either with the methods of interface if_fpm_parameter...
DATA lo_param TYPE REF TO if_fpm_parameter.
lo_param = cl_fpm_factory=>get_instance( )->mo_app_parameter.
CALL METHOD lo_param->get_value
    EXPORTING
        iv_key   = parameter_name
    IMPORTING
        ev_value = parameter_value.
or a more generic approach using class cl_wd_runtime_services...
cl_wd_runtime_services=>get_url_parameter
Cheers,
Amy

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

45W adapter reading as 50W in system profiler

Hi,
When using my 45W adapter, I've noticed that in my system profiler, under AC Charger Information, it says "AC Charger (Watts): 50." Does anyone know if this is normal, or if perhaps this could be causing my battery's full charge capacity to be diminishing?
Like many people, I've had problems with my battery losing power quickly, but Apple just sent me a new one yesterday, which within the day went from having a full charge capacity of 4400mAh to 4296. Can anyone tell me if this could be related to my "50W" adapter?
Thanks!

Welcome to the Apple discussions.
Can't help with why it's seeing 50, however, for your new battery, while Apple says you need to full charge/completely discharge it once for the lithium battery to know it's full capacity, most lithium batteries require two to three charge/discharge cycles to calibrate.

After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

Zap the PRAM and Reset the SMC, then try again.

Why does my CPU speed read "O" in System Profiler?

My System Profiler reads "O" for CPU speed, even though I have a 1.8GHz Giga Designs upgrade.
The computer runs fine, it just really bothers me...
Though I have heard of people having trouble running certain software when this problem occurs. By the way, I have reset the PRAM, and inserted a new battery as well, problem persists.

Thanks! I love this discussion group... 8-)
Err...what is MDD? Guess I don't really need to know, just need to upgrade my Mac. Please don't feel a need to explain if it's complicated.
Japaman, notice you are in Japan. So am I, Nagano-ken (now 8 years). Also noticed you registered here on my birthday, April 16th. Coincidence? I think not...
Just kidding. Anyway, always good to know another English-speaking Mac user in Japan. Please feel free to email me at [email protected]
Cheers!

Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

hi
I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME :
An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/crmfeb.

Hi,
Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
After that restart sapinst.
Regards.

SATA DRIVES NOT SHOWING IN SYSTEM PROFILER

Hi.
Thanks for reading this.
I found out that my SATA drives do not appear in my System Profiler.
I am running OS 10.4.7 on a PowerMAC G4 Dual Gig 2002 Quicksilver with
3 hard drives:
- TWO 250 GB SATA Drives (Both partitioned into 3 sections: 132 GB which is my MAIN drive, 90 GB which is used to back up music, and 53 GB which is used to hold finished work. The other drive is partitioned into 3 sections: 60 GB which is a back up of my MAIN drive, 126 GB which I record music to, and 58 GB which I use for Photoshop/Video finished work.) The SATA drives are connected via PCI card (described below)
- ONE 80 GB ATA Drive (Partitioned into 2 sections: 20 GB which has back up OS and 60 GB which holds my iTunes library.)
Here is what System Profile shows me:
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XB2081EAM8H
Sales Order Number: M8667LL/A
ATA:
ST380021A:
Capacity: 74.53 GB
Model: ST380021A
Revision: 5.05
Serial Number: 3HV0XMWA
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
ATA Drive:
Capacity: 15 GB
Available: 5.51 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s11
Mount Point: /Volumes/ATA Drive
iTunes:
Capacity: 59.4 GB
Available: 682.29 MB
Writable: Yes
File System: HFS+
BSD Name: disk0s12
Mount Point: /Volumes/iTunes
PCI Cards:
SeriTek/1V2E2 v.5.1.1,03/14/05, 23:42:20:
Name: Seri-Tek1V2E2
Type: ata
Bus: PCI
Slot: SLOT-3
Vendor ID: 0x8086
Device ID: 0x3200
Subsystem Vendor ID: 0x8086
Subsystem ID: 0x3200
ROM Revision: 5.1.1.1V2E2
Revision ID: 0x0000
Is this normal?
Is there a way to fix it?
I have noticed some strangeness while using Safari lately, could there be a connection?
PLEASE respond as if you are explaining this all to a COMPLETE idiot.
(Meaning technical jargon with abbreviated terms can cause confusion, just please give a descriptive response?)
Thanks!
And when I click on Serial-ATA I get:
No information found.
PowerMAC G4(2002 Quicksilver) Mac OS X (10.4.7) 2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6

Hi Tommy,
you could try reseting your PRAM to see if that makes any difference, as this holds your systems parameters. You shouldn't hurt your Mac by resetting them.
To reset PRAM hold down AppleAlt+PR on startup until it chimes 3 to 5 times then release.
Also...
Let the Mac boot after a PRAM reset then restart to reset your Open Firmware which may also help. At Startup hold AppleAlt+OF then type at the light grey screen (all without speech marks) "reset-nvram" then press return key. Then type "rest-all" then press return key again. Then type "mac-boot" press return to exit.
These command may help you they may not, but they shouldn't hinder you in any way. But if you are in any doubt about these commands by all means research them further on the Apple website or just ask for a second opinion.
Regards.
Rory

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

Profile parameters

Hi all ,
my system showing one warning .Actually i am having ECC with Abap.When ever I was entering the RZ10 t code and click on to the display ,create or any button it showing this warning "there is no any profile parameters".can you suggest to me how can i add profile parameters i mean default profile parameters.
regards ,
sai

you can set profile parameters....
SAP profiles are operating system files that contain instance setup information. The profiles are stored under /usr/sap/SID/SYS/profile directory.
The following three types of parameter files are defined in SAP:
u2022 Default -DEFAULT
u2022 Start profile - START_DVEBMGS00_
u2022 Instance profile - SID_DVEBMGS00_
These parameters are used for setting the system parameters. These parameters can be maintained by the transaction u2018RZ10u2019 or through the menu:
CCMS ->Configuration ->Profile maintenance
For creating a new profile:
1. Execute transaction u2018RZ10u2019
2. Specify the name of the profile that is to be created and choose Profile -> Create. The system creates the version number automatically.
3. Enter a short description of the profile, the filename into which the profile should be activated, a reference server and the profile type. Then choose Copy.
4. You can maintain parameters and their values by flagging either Basic or Extended maintenance and choosing Maintain.
5. Once the changes are made, choose Copy to return to the initial screen of Transaction RZ10.
6. Then check, save and activate the profile that has been created
7. After this the instance has to be restarted
and also use the links which i provided in my previous post.
regards,
Pradeep

Can you trust System Profiler? Check this out.

Looking at the system profiler i was concerned about my battery capacity so i installed Coconut battery to check it as well.
Look at this screen grab and see if you can spot the problems.
http://www.jonspeed.com/batt.jpg

Well, beyond the discrepancy in battery parameters, I'm trying to figure out how you got version 2.3 of Coconut Battery? From what I can tell by visiting both the VersionTracker page and the developer's site (http://www.coconut-flavour.com/coconutbattery/index.html), Coconut Battery is currently at version 2.2.
What's up with that?
Randall Schulz
iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.5)

SAP Profile Parameters which controls the [ Background Jobs ]

Hi,
Is there any SAP Profile Parameters which controls the [ Background Jobs ] getting executed.
Also I would like to know especially if there are any Timeout Parameters for Background jobs getting executed in the ABAP System.
Thanks in advance.
Regards,
L Raghunahth

Hi
Thanks for your reply..
based on your reply , I searched and found a parameter called rdisp/max_wprun_time
The description given for the parameter is "Maximum work process run time"
Do you have any idea about what is this parameter for ?
Thanks again
Best Regards
L Raghunahth

Understanding profile parameters...

hi friends.. some profile parameters are starting with rdisp/.... ztta/.... rspfpar what does
they mean.. Thank you all...
Moderator message: not directly related to ABAP development, please search for information before asking.
Edited by: Thomas Zloch on Apr 20, 2011 10:49 PM

Review the documentation for each parameter in RZ11 and ask a more specific question...

IPod not recognized by iTunes & Disk Utility - Recognized by System Profile

I have a 40GB iPod Clickwheel (4th Gen?) that i'm trying to fix back to life since my mini was just stolen and i'm out on the road on tour all the time. my iPod actually powers up by itself just fine, the battery life is just peachy, and it can run independently without songs (i'm able to look around just as though i had songs on there - i can play games, alter settings, etc etc.).
However, there's a few things i've noticed!
When i go to the iPod's about menu (when disconnected from the computer), it shows there's no songs, that there's 0 capacity, 0 available - shows that the version is 3.1.1, the serial and model numbers, but the format is unknown.
I've tried plugging the dang thing into my computer to much avail - IF iTunes recognizes it, it says it needs to be restored -- GREAT! so i try to restore the iPod, however, i almost instantly get an error: The iPod cannot be restored because it is currently busy. When i clicked the help tag, it says it's a common problem in iTunes 7.0 - great, i have 8.0.2; and i've tried running everything from a restart on the ipod to a restart on the computer, updating all my system files, running the iPod in disk mode, etc, but nothing seems to make it want to restore.
when i look in system profiler; it shows that the iPod is hooked up to my USB port (which is just fine, and i've never had problems running a click-wheel iPod through that before); however both Disk Utility and iTunes do not acknowledge it's existence. what gives?
is my iPod a goner? how would i go about restoring this so i can use it? I've tried it on my Power PC (Specs below) as well as trying it on an iBook and iMac; with the same results every time. i know it's not the cable, because the iPod actually charged via that cable last night!
any help!?

If you can get it to show up in Disk Utility, try reformatting (erasing) it in Disk Utility. If that process completes without stalling or errors, quit Disk Utility and run iTunes. Immediately attempt to do another Restore to install the iPod's software and initialize.
If the iPod does not erase successfully (it should take less than one minute for a standard erase) in Disk Utility, the iPod's hard drive may be faulty.

Reading system profile parameters programatically in ABAP

Similar Messages

Maybe you are looking for