RS232 Output Module - Checksum on part of String

I am running DASYLab 11 and am trying to write a setpoint to a Eurotherm temperature controller via the EI-BISYNCH protocol over RS-232. This requires that I send some control characters and the address of the unit I am commanding, then the some control characters and the new setpoint value, and then an XOR checksum of the second part of the string (control characters + new setpoint). I can't seem to figure out a way to do this, as the /cx format command gives the checksum of the entire string. I tried placing the first part of the string in channel one, the second part and the checksum formatter in channel two, and then selecting sequential output, but that didn't work. Does anyone have any other ideas?
Thanks for your time!!!
Solved!
Go to Solution.

You will need two different strings... what are your strings?
I do have a very happy customer using Eurotherm controllers... but he uses OPC, not RS232.
the help says this:
Checksum
Control Characters
Description
Cross sum
\cq
Adds all bytes before the checksum character including the contained measurement values and sends the cross sum with the string.
If the format definition contains a \c control character, DASYLab makes the cross sum from the beginning of the string to the position of the control character. If the format definition contains several \c characters, DASYLab makes the subsequent cross sums from one checksum character to the next.
CRC test
\cc
Calculates all bytes of the string to be sent with the CRC16 method. DASYLab sends the binary sequence of the CRC test and the binary sequence of the CRC test including the CRC value as the result. The sent binary sequence are not numbers but polynomials.
XOR sum
\cx
Connects all bytes before the checksum character including the contained measurement values with the exclusive-or operator and sends the binary sequence with the character string.
XOR sum with control character suppression
\cy
Executes the same operation as the XOR sum and adds 32 to the result byte if the result byte is smaller than 32.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

An output module failed. The file may be damaged or corrupted.

Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
Screenshot of the error message:
I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
Screenshot:
It took a while to connect to the dynamic link server, and failed.
This is a log of what has happened in Adobe Media Encoder.
- Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
- Preset Used: YouTube HD 720p 29.97
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
- Encoding Time: 00:00:12
06/29/2014 02:29:14 PM : Encoding Failed
The Operation was interrupted by user
(no need to worry about the above part)
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
- Preset Used: Custom
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
- Bitrate: CBR, 2 pass, Max 10000.00 kbps
- Encoding Time: 00:01:42
11/22/2014 12:24:39 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
- Preset Used: Custom
- Video: 1280x720, 29.97 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
- Encoding Time: 00:00:11
11/22/2014 12:52:11 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:51
11/22/2014 12:53:51 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:46
11/22/2014 08:39:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:00:00
11/22/2014 10:06:45 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I need some help! Any solutions?.
Computer Specs:
AMD FX-6300
8GB 1600MHz DDR3 RAM
NVIDIA GeForce GTX 650 Ti BOOST
1TB 7200RPM Hard Drive
Windows 8.1 Update 1(with latest updates)
EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
Screenshot of a new project other than this I am rendering at the time of writing this edit:

Can other projects can output to the same output location? Yes
Can other projects render with the same render settings (codec, format, etc.)? Yes.
If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

After Effects CC Output Modules on Render Only Machines

Hi there, I'm having an issue with custom Output Module Templates and my renderfarm:
After Effects CC 12.0.0.404 (showing as up to date in Creative Cloud)
Mac OS X 10.8.4 (Latest Mountain Lion version)
Mac Pro 2.93 GHz 8-Core, Radeon 5870, 32GB RAM and with Blackmagic Decklink Extreme 3D+
Remote Machines (there are four) are Mac Pros as well (Quad-core, running 10.7.2 with 16GB RAM), using the ae_render_only_node.txt file in their user Documents folder.
The exact error:
aerender ERROR: No output module template was found with the given name.
I am trying to get a renderfarm working with After Effects CC (see exact version above). Unfortunately, I need custom output modules and I can't seem to get the render slaves to recognize them. I found older threads on this exact issue, but no solution was found.
I am using commandline aerender in OS X terminal to start a render with a basic test scene.
To simplify things, I have tried testing this on one render slave machine at a time... Same result everywhere.
Here's what I've tried:
I exported a .aom file from my main machine (where I have my desired custom Output Modules) and attempted to bring it in on the render slaves. However, because the render slaves are render only, (they have ae_render_only_node.txt in their Documents folder), the ability to import Output Modules is disabled in After Effects (it opens as the After Effects Render Engine, and the Edit>Templates menu is greyed out).
Next, I thought I'd try copying the main machine's /Users/(user)/Library/Preferences/Adobe/After Effects/12.0 folder over to the render slaves, thinking that would get whatever preference file to them that's needed to define the output modules. No luck. Launched After Effects (which loads as After Effects Render Engine) and reset my disk cache preferences (so they weren't still the main machine's). Tried aerender again... no luck. Same error:
aerender ERROR: No output module template was found with the given name.
After that, I thought it would be a good idea to sign out of Adobe Creative Cloud on the main machine, and try logging into the render slave machine with my full UserID and Password and temporarily remove the ae_render_only_node.txt file. Then, I'd import the .aom file in the full version of AE... I tried this and success! The renders work... they find the Output Modules no problem. Only issue is, as soon as I sign out, and switch to using the ae_render_only_node.txt file, the Output Modules are not found. Not sure what's going on-- if the Output Modules are being disabled by the ae_render_only_node.txt file? Or maybe signing out of my Adobe ID is removing the preferences that determine Output Modules? Don't know where the Output Module preferences are stored to be able to tell.
Next attempt: I thought I'd try syncing my preferences with Creative Cloud. I made sure to check After Effects Sync Preferences to ensure that Output Modules are set to sync. I did a sync where I uploaded my preferences from the main machine. Then, on the render slaves, I ran Sync Preferences, and chose to download preferences. Works when signed in, but not when used as a render only node. When it's a render only node, it still prompts me to Download the Sync Preferences and Quit the Application, which I do, but nothing seems to happen. I try aerender again, and still the same error:
aerender ERROR: No output module template was found with the given name.
I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?). Are render only nodes not allowed to have custom Output Modules? Not even for something as simple as the Multi-Machine Sequence with a post-render action of Set Proxy enabled?
Any help is greatly appreciated!
Thank You.

I've verified this problem and filed a bug. Sorry about the hiccup.
I've trying to pin down why this happens, and while I don't have a full explanation yet I think I've stumbled onto a workaround:
Trash the prefs on the render machine.
Enable the ae_render_only_node.txt file.
Launch AE and then quit. <- This is a critical step. More on this later.
Disable ae_render_only_node.txt file.
Launch AE.
Add your Output Module template.
Quit AE.
Enable the ae_render_only_node.txt file.
After you do this, I highly recommend making a backup copy of the Adobe After Effects 12.0 Prefs-indep-output.txt file. Just in case. I've had the failure reappear.
Now test with aerender and let me know if that works. It has on my machine.
Why does this matter? When you run AE with the ae_render_only_node.txt file enabled, it appears to add a new section to the preferences: "Output Module Preference Section v28-TRIAL". It's the TRIAL part that is important. Without it, AE doesn't seem to be able to keep track of the OM's when in render_only_node mode. And if you disable the ae_render_only_node.txt file, AE has a tendency to destroy the TRIAL section (I'm still tracing why that happens).
Now, should this not work for you, I recommend you work around the problem by adding your comps to the render queue in each project. When you do that, and change your aerender flags appropriately, you can render to your desired settings without specifying OMtemplate parameter.
> I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?).
You probably already discovered this. In After Effects CC the OM data is stored in the Adobe After Effects 12.0 Prefs-indep-output.txt file. In older versions of AE, a single pref file such as Adobe After Effects 11.0-x64 Prefs.txt holds all of this data.
Let me know if that workaround does the trick for you. If I get more information on the cause of the problem I'll update you.

AE CC Render error output module failed

Hi, I tried my best to find this answer on the forums but couldn't find anything current.
I have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac
3.4 GHz Intel Core i7
8GB RAM
NVIDIA GeForce GTX 680MX with 2GB VRAM
OS X 10.8.4
AE CC 12.0.0.404
CUDA driver 5.0.59
Thanks for any suggestions!
Matt

Olaf, did you read my reply where I explained my solution? First you should try the steps outlined in the article Todd references:
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime- errors-with-after-effects.html
There seems to be a good way to isolate if it's the same issue I had, though. Let me go into a bit of depth for you.
The trick was to launch the OS X app called Console, located in Applications > Utilities. It is a program that compiles and displays the system logs in real time. It's great to see the little things happening in the system that don't make it into the user interface. When I had my Console up and generated that same error you're having, I noticed this error in the log:
The key here is the Adobe QT32 Server, which is mentioned in the TCP part of the article I linked to above from Todd. In my case at least, what was happening was that a third party app called AirServer was talking to the system's QuickTime over the same TCP ports the QT32 Server engine was trying, and it resulted in Adobe QT32 Server crashing, and that alert being thrown up in AfterEffects.
If you're in the same boat, it means you have some sort of app or system extension that is also talking to QuickTime over TCP. That may not make any sense, but the easy thing to do is quit ALL third party apps, then quit AE, then restart AE.
In my situation if AE gave me the error and then I quit AirServer, the error still happened because Adobe QT32 had already crashed. You have to relaunch AE after closing the offending third party app.
To be sure you've quit all third party apps, open Activity Monitor (Applications > Utilities), chose "My Processes" from the dropdown menu, and scan through the list to make sure. You don't have to recognize all the processes there, but you should be able to recognize any third party ones you put there.
Hope that helps!
Matt

Converting output of dw.findNext() to a string

I'm writing a script to search for
content
in a document, change the tag to <a>, and the content to href="http://content" target="_blank"
I'm thinking that part of accomplishing this would be converting the output of dw.findNext() to a string and storing the resulting string as a variable.Then I could use the variable in dreamweaver.setUpComplexFindReplace().
I'm just not entirely sure how to do that - particularly given that there are going to be multiple instances of content in the documents I'm searching, and I want to accurately convert every one of them.
Suggestions?

Sorry - I'm being dense, but I'm having some trouble picturing how to convert the output of dw.findNext() or dw.findAll() to an array. The idea makes a lot of sense though - I could see the script looking a bit like this:
(Script converting the output of dw.findAll() to an array (findAllArray))
Ctr = 0;
while (Ctr < findAllArray.length) {
findAllString = findAllArray[Ctr].toString()
if (findString.match("http://")) {
findString = findString }
else { findString = "http://" + findString }
dreamweaver.setUpComplexFindReplace('<dwquery><queryparams matchcase="false" ignorewhitespace="true" useregexp="false" wholeword="false" /><find><qtext qname="<a class="hyperlink"" qraw="true"></qtext></find><replace action="replaceText" param1="<a href="' + findString + 'L" onClick="popup = window.open(\'' + findString + '\', \'PopupPage\', \'height=500,width=575,scrollbars=yes,resizable=yes\'); return false" target="_blank">" /> </dwquery>');
dreamweaver.replaceAll()

Creating a Function module to send XML Byte String

Hi all,
I have to create a Function module to get XML byte string.The internal table is dynamic coloums based on how many data selected as a importparameter.from the internal; table data I have to create a XML byte string as a output.Pl help me to proceed further.
Thanks in Advance.
Ram

If i have your question right you need to convert an internal table of unknown type to an xml string then to a byte string.
data xmlString type string.
data xmlXString type xstring.
call transformation id
   source
      table = internalTableYouWantToExport
   result
      xml xmlString.
export xmlString to data buffer xmlXString.
xmlString has the xml of the table and xmlXString contains the byte representation of the string.

String function in Oracle 9i to find part of string having two positions

Hi,
We need to extract the part of string having start and end position.
Like
Suppose the string is "TYPE ref_cur_type IS REF CURSOR" and need to extract name of the ref cursor i.e ref_cur_type.The length of the output is not fixed. But not able to extract the exact string.
Thanks,

What is the criteria for part of string? Do you give start character and end character position like 3,9 etc? Or its just that the word that comes between two spaces?
Cheers
Sarma.

Where are output module presets physically stored?

I have a broken XP installation that is not fixable but the drive is accesible from my other Windows installation.
Before I broke XP I deactivated my CS3 and now I have it installed and activated in Windows 7.
Now I am really missing all my output module presets. I can import them, but then I should have exported them first, which is not an option.
The AppData folder is really full of stuff
Here are some other important folders when migrating. In this case D: is the old installation drive:
D:\Program Files (x86)\Adobe\Adobe After Effects CS3\Support Files\Scripts\
D:\Program Files (x86)\Adobe\Adobe After Effects CS3\Support Files\Templates\
D:\Users\[Username]\AppData\Adobe\After Effects\8.0\
Media Encoder presets:
D:\Users\[Username]\AppData\Adobe\After Effects\8.0\MediaIO\Presets
But hey no Output Modules in there..

Hi,
Thanks for the reply.
I think you misunderstood me though. There was nothing wrong with the Adobe installation. It was my operating system that I broke. Sort of on purpose. I just assumed I could get my settings back the good old manual way instead of using the program. And I was right for the most part. Don't worry, I know what I am doing. I just didn't know the output module presets weren't stored in either the application folder or the AppData folder.
So what I need to know is where those presets are physically stored so I can get them back too.
Oh I hope it's not the registry. That's the one thing I cannot touch. But then again why would it be in the registry when everything else is stored in files and AE is portable to OSX anyway and they don't have a registry.

Output module gone

I am trying to find a the Bridge 5 output module download. I was trying uninstall the current one and reinstall bc my output module wasn't working. I accidentally installed CC output module and can't find the deleted one. Help!!

I don't think it is a download. It is part of CS5 as a total package.

How to list output module templates

I cant seem to get the list of output modules templates, without having a comp in the render queue and getting the template array by looking in: app.project.renderQueue.item(1).outputModules[1].templates.
I want to populate a DropDownList with these values prior to adding anything to the renderQueue if possible.

There is a less kludgy way to do this for Output modules:
function getOutputModuleTemplateNames()
var currentOMName;
var OMStringsPrefSection = "Output Module Spec Strings Section v28";
var OMStringsKeyPrefix = "Output Module Spec Strings Name ";
var hiddenPrefixRE = /_HIDDEN/;
var OMList = new Array();
for(var i = 0; app.preferences.havePref(OMStringsPrefSection, OMStringsKeyPrefix+i, PREFType.PREF_Type_MACHINE_INDEPENDENT_OUTPUT); i++)
currentOMName = app.preferences.getPrefAsString(OMStringsPrefSection, OMStringsKeyPrefix+i, PREFType.PREF_Type_MACHINE_INDEPENDENT_OUTPUT);
if(currentOMName.match(hiddenPrefixRE)==null) OMList.push(currentOMName);
return OMList;
My problem is I'd like to do this for Render Settings templates, too, but they aren't stored as individual keys in the preferences, but rather as some chunk of encoded data that can't be retrieved (as far as I can tell) using app.preferences.getPrefAsString().
Is there any way, short of reading in the preference file itself, which seems clunky and not at all future-proof, to get access to settings like this?

Output module settings in AE disappears when activating Creative Cloud

I have been using Creative Cloud a little year now. Sometimes one of the programs en the suite asks me to activate the software. Then I (again) type in my adobe id.
After that the output module settings in After Effects disappears and I have to rebuild them manually. Very annoying.
Why am I asked to activate? And where do the settings go?

HI Blues67,
Sorry to hear about your difficulties. I've experienced the reactivate behavior and it is something I know we are working to improve. I haven't experienced the output module issue before. I searched the After Effects forum for "output module" and read through all the posts and didn't see similar reports from other customers, so wondered if it was something unique. I think the the output module preferences are saved as part of the regular After Effects user preferences. I wondered if you were on Windows or Mac. If you've had to reset your user preferences that might account for the output module settings being reset too. I'd test recreating them by moving the original to a new location, and if they do get reset, you can save a backup for future reference if needed. I think
you can get more info about the location from here:
http://help.adobe.com/en_US/aftereffects/cs/using/WS37cb61f8f3397d86-164c9f19127035dd253-8 000.html
-Dave

ICom output module

Hello,
Using the TCP IP ICom output module, I am trying to send the string '2DSO=0\r', without the single quotes, to power a small relay that powers a lamp, but the relay does not power on. I can manually 'Send' the command from the module 'Send' button and it will activate the relay. I have a value of 0 in the input when the switch is off and a value on 5 when the switch should be on.
Thank you,
Richard
Attachments:
icom.png ‏216 KB

Note that you can do interactive testing using the ICOM monitor in the ICOM input module.
It has the same issue as the Output, in that the static Send does not necessarily recreate the runtime environment, but, it will let you see if the device responds.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

How to used REGEXP_REPLACE for replace part of string ?

hi
How can i replace part of string as following , i want to replace space in date by "-"
SELECT
REGEXP_REPLACE(upper('Daivd bought stuff by 2000 USD on 12 Sep 2012 from KL and left kl on 20 Sep 2012'),
'[0-9]{1,2}[^0-9](JAN|FEB|MAR|APR|JUN|JUL|AUG|SEP|OCT|NOV|DEC)[^0-9][0-9]{4}',
' ','-') "REGEXP_REPLACE"
FROM DUAL;
the output will be like this
Daivd bought stuff by 2000 USD on 12-Sep-2012 from KL and left kl on 20-Sep-2012
regards

I thought the questions is answered.
Your code will not work, because the alternate expression applies only to the four digit year and the month.
If you want to recognize both date formats with one expressions, you have to group the complete expressions.
The disadvantage of this would be, that the backreferences would not work in the same way because you would have more groups.
I advice to use two separate regular expressions for this task.
Take a look at the following example if you simply want to fill the gaps with -:
with yourtable as
select 'Daivd bought stuff by 2000 USD on 12 Sep 2012 from KL and left kl on 20 Sep 2012' text from dual union all
select 'Daivd bought stuff by 2000 USD on Sep, 20 2012 from KL and left kl on Sep, 20 2012' text from dual
SELECT
REGEXP_REPLACE(
REGEXP_REPLACE(text,
'([0-9]{1,2}) (JAN|FEB|MAR|APR|JUN|JUL|AUG|SEP|OCT|NOV|DEC) ([0-9]{4})','\1-\2-\3',1,0,'i'),
'(JAN|FEB|MAR|APR|JUN|JUL|AUG|SEP|OCT|NOV|DEC), ([0-9]{1,2}) ([0-9]{4})','\1-\2-\3',1,0,'i') regexp_replace
FROM yourtable;If you want same output-format for both date formats you could use this:
with yourtable as
select 'Daivd bought stuff by 2000 USD on 12 Sep 2012 from KL and left kl on 20 Sep 2012' text from dual union all
select 'Daivd bought stuff by 2000 USD on Sep, 20 2012 from KL and left kl on Sep, 20 2012' text from dual
SELECT
REGEXP_REPLACE(
REGEXP_REPLACE(text,
'([0-9]{1,2}) (JAN|FEB|MAR|APR|JUN|JUL|AUG|SEP|OCT|NOV|DEC) ([0-9]{4})','\1-\2-\3',1,0,'i'),
'(JAN|FEB|MAR|APR|JUN|JUL|AUG|SEP|OCT|NOV|DEC), ([0-9]{1,2}) ([0-9]{4})','\2-\1-\3',1,0,'i') regexp_replace
FROM yourtable;Edited by: hm on 25.09.2012 22:00

Quicktime Export Error: "An output module stopped responding."

I'm experiencing an odd export error whenever I use any Quicktime codecs:
"After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
System specs:
Windows 7 64-bit
Intel i7-2600k processor
8 GB RAM
GTX 580 GPU
Software:
Adobe CS6
AE Plugins include Tracode Suite 12 and Optical Flares
Quicktime 7.7.3
Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
Josh

Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
*EDIT*
That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
Thanks,
Josh

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

RS232 Output Module - Checksum on part of String

Similar Messages

Maybe you are looking for