Selective deletion on info cube taking long time.
We have a cube with line item dimension and partioned on Fiscal year. When we are doing selective deletions on the cube on 0fiscper (removing the old redundant data) it is taking quite long time (approx 10 hours) to do this selective deletions as there is huge data in the E fact table ,Request older than 4 days are compressed in the cube and it has some millions of records in this table.
Is there any way we can improve the performance of this selective deletion? Any improvements suggestions we are on sap BW 3.5 system.
Hi,
The issue is very specific .
I recommend to check if there are defined matching indexes which fit to the where clauses of the delete statements. This will make the access to the record most effient.
All other indexes need to be just deleted for the time-being and re-created after the clean is completed. This will save the time for updating the indexes.
The deletes should be performed in bulks - i.e. many, e.g. 25, 100, more at once. If deletes sqls are send from ABAP to database one by one there is huge overhead in the network traffic time.
Best Regards,
Sylvia
Similar Messages
-
Selective deletion in info cube
is there any option to do selective deletion in info cube.
i need step by step detail.
thanks
ksYes indeed there is step to delete selectively in Cube.
http://help.sap.com/saphelp_nw70/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Its in Manage cube- Content tab- deletion
Thanks -
Delete from VAPMA is taking long time
Hello Team
Steps followed to create order in ECC
1) Create ZORD for customer 3022243 in VA01
2) Add material 2001436 quantity 18, press enter
3) Add material 2001436 quantity 1, press enter. Change item category to ZANP. Add Promo ID AS10061 in Additional Data B screen of item
4) Add material 2001157 quantity 1, press enter. Change item category to ZANP. Add Promo ID AS10061 in Additional Data B screen of item
5) Add material 5001044 quantity 1, press enter. Reject item "Y6 Promo not available"
6) Set delivery block on the order - "Y6 Open Order Block"
7) Save
8) Change Order, remove delivery block, save.
At this point the system calls function RV_SALES_DOCUMENT_UPDATE in update task. This subsequently calls form INDEX_VAPMA_SCHREIBEN in program SAPLV05I which deletes entries from table VAPMA. It is this form that is taking time to execute. In SM50 this can be seen quite clearly.
SM50 shows as below
27 UPD 19707 Running Yes 346 SAPLV05I 020 DXEVANS2 Delete VAPMA
No Ty. PID Status Reasn Start Err Sem CPU Time Cl. User
27 UPD 19707 Running Yes 0:23 471 020 DXEVANS2
Report / Spool action
SAPLV05I
Main Program
RSM13000
Delete VAPMA
So i request you to please check and suggest any steps which i need to follow from my side.
Reg
RjHi Rj,
Did you check OSS? When you do a search on VAPMA quite a few notes dealing with performance related problems show up.
Kind regards,
Robert -
Using functions in select statement(joining 5 tables) taking long time in Oracle
Hi,
I have created a query in oracle which joins 5 tables and uses two functions(function names are 'ca_concat' and 'ca_concat_noseq').
Query takes approximately 40 secs to execute around 12000 records. If I remove the functions from query it excutes within a second..
Note : I have used the oracle SQL Developer for testing the query.
It would be appriciated if anybody helps me to improve the perfomance of the query.
Below are the querie with and without functions:
1. Query with functions:
select
imsAuditEvent12.id as ID,
imsAuditEvent12.audit_time as AUDIT_TIME,
imsAuditEvent12.admin_dn as ADMIN_DN,
imsAuditEvent12.admin_name as ADMIN_NAME,
imsAuditEvent12.event_name as EVENT_NAME,
imsAuditEvent12.event_description as EVENT_DESCRIPTION,
imsAuditEvent12.event_state as EVENT_STATE,
imsAuditEvent12.envname as ENVNAME,
imsAuditTaskSession12.task_name as TASK_NAME,
imsAuditTaskSession12.id as TASK_ID,
imsAuditTaskSession12.task_description as TASK_DESCRIPTION,
imsAuditTaskSession12.task_priority as TASK_PRIORITY,
S1.OBJECT_ID,
S1.OBJECT_NAME as OBJECT_NAME,
S1.OBJECT_TYPE as OBJECT_TYPE,
S2.ATTRIBUTE_NAME as ATTRIBUTE_NAME,
S2.ATTRIBUTE_OLDVALUES as ATTRIBUTE_OLDVALUES,
S2.ATTRIBUTE_NEWVALUES as ATTRIBUTE_NEWVALUES,
S3.OBJECT_DN as OBJECT_DN,
S3.OBJECT_TYPE as IMSOBJECT_TYPE,
S3.CONTAINER_NAME as CONTAINER_NAME,
S3.CONTAINER_DN as CONTAINER_DN,
S3.CONTAINER_TYPE as CONTAINER_TYPE
from
imsAuditEvent12 LEFT JOIN imsAuditTaskSession12 ON imsAuditTaskSession12.id=imsAuditEvent12.tasksession_id LEFT JOIN
(select parent_event_id,
ca_concat('imsAuditEventObject12.parent_event_id',parent_event_id,'imsAuditEventObject12.object_name','imsAuditEventObject12') as OBJECT_NAME,
ca_concat('imsAuditEventObject12.parent_event_id',parent_event_id,'imsAuditEventObject12.object_type','imsAuditEventObject12') as OBJECT_TYPE,
ca_concat_noseq('imsAuditEventObject12.parent_event_id',parent_event_id,'imsAuditEventObject12.ID','imsAuditEventObject12') as OBJECT_ID
from
imsAuditEventObject12 group by parent_event_id) S1
ON imsAuditEvent12.id = S1.parent_event_id LEFT JOIN
(select
parent_object_id,
ca_concat('parent_object_id',parent_object_id,'attribute_name','imsauditobjectattributes12') as ATTRIBUTE_NAME,
ca_concat('parent_object_id',parent_object_id,'attribute_oldvalue','imsauditobjectattributes12') as ATTRIBUTE_OLDVALUES ,
ca_concat('parent_object_id',parent_object_id,'attribute_newvalue','imsauditobjectattributes12') as ATTRIBUTE_NEWVALUES
from
imsauditobjectattributes12 group by parent_object_id) S2
ON S1.OBJECT_ID = S2.parent_object_id LEFT JOIN
(select
parent_event_id,
ca_concat('parent_event_id',parent_event_id,'OBJECT_DN','imsauditobjectrelationship12') as OBJECT_DN,
ca_concat('parent_event_id',parent_event_id,'OBJECT_TYPE','imsauditobjectrelationship12') as OBJECT_TYPE ,
ca_concat('parent_event_id',parent_event_id,'CONTAINER_NAME','imsauditobjectrelationship12') as CONTAINER_NAME,
ca_concat('parent_event_id',parent_event_id,'CONTAINER_DN','imsauditobjectrelationship12') as CONTAINER_DN,
ca_concat('parent_event_id',parent_event_id,'CONTAINER_TYPE','imsauditobjectrelationship12') as CONTAINER_TYPE
from
imsauditobjectrelationship12 group by parent_event_id) S3
ON imsAuditEvent12.id =S3.parent_event_id where imsauditevent12.id > 0 and imsauditevent12.id <12000 order by imsauditevent12.id ASC;
2. Query without using functions:
select * from imsauditeventobject12 left join imsauditevent12 on imsauditeventobject12.id=imsauditevent12.id left join imsauditobjectattributes12 on imsauditeventobject12.id=imsauditobjectattributes12.parent_object_id left join imsaudittasksession12 on imsauditevent12.tasksession_id=imsaudittasksession12.id left join imsAuditObjectRelationship12 on imsAuditEvent12.id =imsAuditObjectRelationship12.parent_event_id where imsauditevent12.id >0 and imsauditevent12.id < 12000 order by imsauditevent12.id asc;
Thanks,
BadriHi,
Please find the below more information about the query.
DB version: Oracle 11g Enterprise Edition Release 11.2.0.1.0
Below are source of the functions:
create or replace function ca_concat( ca_key_name in varchar2,
ca_key_val in varchar2,
ca_other_col_name in varchar2,
ca_tname in varchar2 )
return varchar2
as
type rc is ref cursor;
l_str varchar2(32000);
l_sep varchar2(1);
l_val varchar2(32000);
l_count number(6);
l_cur rc;
begin
l_count :=1;
l_str := '';
open l_cur for 'select '|| ca_other_col_name ||'
from '|| ca_tname || '
where ' || ca_key_name || ' = '
using ca_key_val;
loop
fetch l_cur into l_val;
l_val := SUBSTR(l_val,0,102);
exit when (l_cur%notfound or l_count > 38);
l_str := l_str || l_sep || l_count || '.' || l_val;
l_sep := ',';
l_count := l_count + 1;
end loop;
close l_cur;
return l_str;
end;
create or replace function ca_concat_noseq( ca_key_name in varchar2,
ca_key_val in varchar2,
ca_other_col_name in varchar2,
ca_tname in varchar2 )
return varchar2
as
type rc is ref cursor;
l_str nvarchar2(32000);
l_sep varchar2(1);
l_val varchar2(32000);
l_count number(6);
l_cur rc;
begin
l_count :=1;
open l_cur for 'select '||ca_other_col_name||'
from '|| ca_tname || '
where ' || ca_key_name || ' = '
using ca_key_val;
loop
fetch l_cur into l_val;
exit when (l_cur%notfound or length(l_val)>3000 or l_count>1);
l_str := l_str || l_sep || l_val ;
l_sep := ',';
l_count := l_count + 1;
end loop;
close l_cur;
return l_str;
end;
Below are the tables structures:
DESC imsauditevent12;
Name Null Type
ID NOT NULL NUMBER
TASKSESSION_ID NOT NULL NUMBER
TASKSESSION_OID VARCHAR2(100)
PARENT_EVENT_OID VARCHAR2(100)
AUDIT_TIME NOT NULL TIMESTAMP(6)
EVENT_OID NOT NULL VARCHAR2(100)
ADMIN_DN NOT NULL VARCHAR2(512)
ADMIN_NAME VARCHAR2(255)
EVENT_NAME NOT NULL VARCHAR2(255)
EVENT_DESCRIPTION VARCHAR2(4000)
EVENT_STATE VARCHAR2(100)
ENVNAME NOT NULL VARCHAR2(100)
ENV_OID NOT NULL VARCHAR2(100)
DESC imsauditeventobject12;
Name Null Type
ID NOT NULL NUMBER
PARENT_EVENT_ID NOT NULL NUMBER
AUDIT_TIME NOT NULL TIMESTAMP(6)
OBJECT_TYPE NOT NULL VARCHAR2(100)
OBJECT_NAME VARCHAR2(255)
DESC imsauditobjectattributes12;
Name Null Type
ID NOT NULL NUMBER
PARENT_OBJECT_ID NOT NULL NUMBER
AUDIT_TIME NOT NULL TIMESTAMP(6)
DISPLAY_NAME VARCHAR2(255)
ATTRIBUTE_NAME NOT NULL VARCHAR2(255)
ATTRIBUTE_OLDVALUE VARCHAR2(4000)
ATTRIBUTE_NEWVALUE VARCHAR2(4000)
DESC imsaudittasksession12;
Name Null Type
ID NOT NULL NUMBER
PARENT_TS_OID VARCHAR2(100)
PARENT_EVENT_OID VARCHAR2(100)
AUDIT_TIME NOT NULL TIMESTAMP(6)
TASKSESSION_OID NOT NULL VARCHAR2(100)
ADMIN_DN NOT NULL VARCHAR2(512)
ADMIN_NAME VARCHAR2(255)
TASK_NAME VARCHAR2(255)
TASK_TAG NOT NULL VARCHAR2(255)
TASK_DESCRIPTION VARCHAR2(4000)
TASK_PRIORITY NUMBER
STATE NOT NULL VARCHAR2(100)
ENVNAME NOT NULL VARCHAR2(100)
ENV_OID NOT NULL VARCHAR2(100)
DESC imsAuditObjectRelationship12;
Name Null Type
ID NOT NULL NUMBER
PARENT_EVENT_ID NOT NULL NUMBER
AUDIT_TIME NOT NULL TIMESTAMP(6)
OBJECT_TYPE NOT NULL VARCHAR2(100)
OBJECT_DN NOT NULL VARCHAR2(512)
CONTAINER_TYPE NOT NULL VARCHAR2(100)
OBJECT_NAME NOT NULL VARCHAR2(255)
CONTAINER_NAME NOT NULL VARCHAR2(255)
CONTAINER_DN NOT NULL VARCHAR2(512)
OPERATION NOT NULL VARCHAR2(50)
Thanks,
Badri -
Delete statements are taking longer time
Hi All,
I have an issue with delete statement. below are my oracle DB details.
SQL>select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
I have a schema in the database which has 120 tables in it. The problem is, when the QA team is deleting the customers from customer table, it is running long time and haven't completed. this customer table have FK relation with other tables and have all the right indexes in place. then i have tried to identified the problem, why it is taking long time, and found that when they are running this delete query at the same time application is also running. the sessions created by application are locked most of the table and at the same time the delete session is also waiting for exclusive lock on those table. I given the same info to QA team and asked to stop the application when they deleting the customers. Then they said, they don't want to stop the application and the delete has to work and they asked for different solution. Here i am not sure, what solution i need to provide them.
Can you please suggest me a approach and Thanks in advance.Hari wrote:
and at the same time the delete session is also waiting for exclusive lock on those table. The only way the delete session could be waiting for an exclusive lock on the table is if the code to delete from the customer includes the command: lock table customer in exclusive mode;Unless your original description is wrong, either the deletion code has to change or the application has to stop modifying the customer table.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Author: <b><em>Oracle Core</em></b> -
Taking Long Time To Show Printer Selection Window
Hi experts,
When users are taking printout through SAP,it's taking long time to show printer selection window(Local Printer Selection Windows)
present i am using sap ehp7 on sybase in windows.
Thanks in advance..Hi,
Have you tried by reinstalling of printer with patch updation of printer as well as of windows also ? If possible try to uninstall the printer & check again by reselection.
Addition to it could you please share SAP GUI version on the system & confirm for, are you getting this issue on every system ( OS ) ?
Regards,
Gaurav -
Hi All,
We are working on BI 7.0. version
In the varaible pop-up screen we have two info objects.
1. Fiscal year Period
2. JOA(Joint operating aggriment)
If u press F4 for JOA, it is taking long time to execute and finally the application is getting closed.same situation is there in RSRT also.
If i enter with out JOA the query is giving the output. Here i have to restrict the query by JOA.
i have changed the JOA peroperties in query designer.
Query execution for filter value selection = Values in master data table.......
but still the situation is the same.......
Could you please suggest any solution for this.....
Thanks & Regards,
PKHi Kamal,
You can set that at the query level in the query designer for each query.
1. Select the corresponding characteristic in the query designer.
2. Goto to the "Extended tab" in the properties
3. Select the "Values in the Master data table" in the "Query execution in the filter value selection.
Also see some recomendations:
Note 748623 - Input help (F4) has a very long runtime - recommendations
Hope this helps.
CK -
Report Taking long time in QA system
Gurus,
I have developed a report which works fine in dev.Though in QA system its performance is not okay.Please go through th ecode and help me through.
TABLES: REGUH,BSAK,BSIS,LFA1,LFB1,BSAS.
**** Internal table declaration starts.
*** To Store Vendor clearing Document.
*** Internal table for credit card sub total.
DATA : BEGIN OF I_BSAK OCCURS 0,
XBLNR LIKE BSAK-XBLNR,
LIFNR LIKE REGUH-LIFNR,
PRCTR LIKE BSEG-PRCTR,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
GJAHR LIKE BSAK-GJAHR,
BELNR LIKE BSAK-BELNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
HKONT LIKE BSEG-HKONT,
END OF I_BSAK.
*** Internal table for Vendor sub total.
DATA : BEGIN OF I_BSAK_LIFNR OCCURS 0,
LIFNR LIKE REGUH-LIFNR,
XBLNR LIKE BSAK-XBLNR,
PRCTR LIKE BSEG-PRCTR,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
GJAHR LIKE BSAK-GJAHR,
BELNR LIKE BSAK-BELNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
HKONT LIKE BSEG-HKONT,
END OF I_BSAK_LIFNR.
*** Internal table for Profit center sub total.
DATA : BEGIN OF I_BSAK_PRCTR OCCURS 0,
PRCTR LIKE BSEG-PRCTR,
BELNR LIKE BSAK-BELNR,
GJAHR LIKE BSAK-GJAHR,
LIFNR LIKE REGUH-LIFNR,
XBLNR LIKE BSAK-XBLNR,
HKONT LIKE BSEG-HKONT,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
END OF I_BSAK_PRCTR.
*** Work area for sub totals.
DATA: WA LIKE I_BSAK.
DATA : I_BSAK_INIT LIKE I_BSAK OCCURS 0 WITH HEADER LINE.
*** To store line item.
DATA : BEGIN OF I_BSEG OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
BUZEI LIKE BSEG-BUZEI,
HKONT LIKE BSEG-HKONT,
SHKZG LIKE BSEG-SHKZG,
DMBTR LIKE BSEG-DMBTR,
PRCTR LIKE BSEG-PRCTR,
LIFNR LIKE REGUH-LIFNR,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR LIKE BSAK-XBLNR,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
NAME1 LIKE LFA1-NAME1,
END OF I_BSEG.
DATA : BEGIN OF I_BSEG_COPY OCCURS 0,
PRCTR LIKE BSEG-PRCTR,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
BUZEI LIKE BSEG-BUZEI,
HKONT LIKE BSEG-HKONT,
SHKZG LIKE BSEG-SHKZG,
DMBTR LIKE BSEG-DMBTR,
LIFNR LIKE REGUH-LIFNR,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR LIKE BSAK-XBLNR,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
NAME1 LIKE LFA1-NAME1,
END OF I_BSEG_COPY.
*** To store GL account name
DATA: BEGIN OF I_SKAT OCCURS 0,
SAKNR LIKE SKAT-SAKNR,
TXT50 LIKE SKAT-TXT50,
END OF I_SKAT.
*** To store Vendor detail
DATA: BEGIN OF I_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
KTOKK LIKE LFA1-KTOKK,
END OF I_LFA1.
DATA: I_INACT TYPE TABLE OF SY-UCOMM.
*** End of Internal table declaration.
*** Constant for company code
CONSTANTS : C_BUKRS(4) VALUE '0010'.
*** Data declaration.
DATA: FR_LAUFDT LIKE REGUH-LAUFD,
TO_LAUFDT LIKE REGUH-LAUFD,
COL,
HEADING(80),
HEADING1(10),
HEADING2(80),
AUTH_RESTRICT,
G_DETAIL,
G_SORTV,
G_SORTP,
G_SORTC,
G_FLAG,
V_XBLNR LIKE BSAK-XBLNR,
V_UCOMM LIKE SY-UCOMM,
V_AUGBL LIKE BSAS-AUGBL,
V_BELNR LIKE BSAS-BELNR.
DATA : BEGIN OF I_SEL OCCURS 0 ,
AUGBL LIKE BSAK-AUGBL,
END OF I_SEL.
DATA: PROGNAME TYPE SY-REPID,
DYNNUM TYPE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB LIKE I_SEL OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*** Selection screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TXT_PD FOR FIELD P_LAUFDF.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS P_LAUFDF LIKE REGUH-LAUFD OBLIGATORY.
SELECTION-SCREEN COMMENT 52(5) TXT_TO FOR FIELD P_LAUFDT.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS P_LAUFDT LIKE REGUH-LAUFD.
SELECTION-SCREEN END OF LINE.
SELECT-OPTIONS: S_KTOKK FOR LFA1-KTOKK.
PARAMETERS: P_RWBTR LIKE REGUH-RWBTR.
SELECT-OPTIONS: S_LIFNR FOR REGUH-LIFNR.
* S_XBLNR FOR BSAK-XBLNR MATCHCODE OBJECT ZXBLNR.
**** Added By Rajesh On 17 OCT 08 (DEVK914797) ****
SELECT-OPTIONS: S_BELNR FOR BSAK-BELNR.
**** End of Addition By Rajesh *****
*** Added By Samir On 04 Sep 08 (DEVK914623) ***
SELECTION-SCREEN SKIP.
PARAMETERS: CHK_REC AS CHECKBOX.
*** End Of Addition By Samir ***
SELECTION-SCREEN END OF BLOCK B1.
*** Initialization.
INITIALIZATION.
TXT_PD = 'Payment Date'.
TXT_TO = 'to' .
G_SORTC = 'X'.
*** At selection-screen.
AT SELECTION-SCREEN.
FR_LAUFDT = P_LAUFDF.
IF P_LAUFDT IS INITIAL.
TO_LAUFDT = FR_LAUFDT.
ELSE.
IF P_LAUFDT LT P_LAUFDF.
MESSAGE E000(ZMSG) WITH 'To Date is less than From date'.
ENDIF.
TO_LAUFDT = P_LAUFDT.
ENDIF.
*** Heading.
WRITE FR_LAUFDT TO HEADING1.
WRITE TO_LAUFDT TO HEADING2.
IF HEADING1 <> HEADING2.
CONCATENATE 'Vendor Credit Card(s) Report for the Payment Date'
HEADING1 'To' HEADING2 INTO HEADING2 SEPARATED BY SPACE.
ELSE.
CONCATENATE 'Vendor Credit Card(s) Report for the Payment Date'
HEADING1 INTO HEADING2 SEPARATED BY SPACE.
ENDIF.
*** Start of selection.
START-OF-SELECTION.
G_DETAIL = 'X'.
PERFORM GET_DATA.
PERFORM MODIFY_ITAB. "Process and for authority check.
*** Added By Samir On 04 Sep 08 (DEVK914623) ***
**** Changed By Rajesh On 17 OCT 08 (DEVK914797) ****
IF CHK_REC = 'X'.
LOOP AT I_BSAK.
SELECT SINGLE BELNR
INTO V_BELNR
FROM BSAS
WHERE BUKRS = C_BUKRS
AND HKONT = '0000002012'
AND BELNR = I_BSAK-AUGBL
AND BUDAT = I_BSAK-AUGDT
AND BELNR IN S_BELNR. " For displaying only reconciled items.
**** End of Addition By Rajesh *****
IF SY-SUBRC <> 0.
DELETE I_BSAK.
ENDIF.
ENDLOOP.
ENDIF.
*** End Of Addition By Samir ***
LOOP AT I_BSAK.
MOVE-CORRESPONDING I_BSAK TO: I_BSAK_LIFNR.
APPEND: I_BSAK_LIFNR.
CLEAR: I_BSAK_LIFNR.
ENDLOOP.
LOOP AT I_BSAK.
MOVE-CORRESPONDING I_BSAK TO: I_BSAK_PRCTR.
READ TABLE I_BSEG WITH KEY BELNR = I_BSAK-BELNR.
I_BSAK_PRCTR-HKONT = I_BSEG-HKONT.
APPEND: I_BSAK_PRCTR.
CLEAR: I_BSAK_PRCTR.
ENDLOOP.
*loop at i_bseg.
* MOVE-CORRESPONDING I_BSAK TO: I_BSAK_PRCTR.
*endloop.
*perform write_data.
PERFORM DISPLAY_OUTPUT.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPA'.
G_DETAIL = 'X'.
WHEN 'COLL'.
CLEAR G_DETAIL.
WHEN 'SORTV'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTV'.
G_SORTV = 'X'.
CLEAR G_SORTP.
CLEAR G_SORTC.
WHEN 'SORTC'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTC'.
CLEAR G_SORTV.
CLEAR G_SORTP.
G_SORTC = 'X'.
WHEN 'SORTP'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTP'.
CLEAR G_SORTV.
CLEAR G_SORTC.
G_SORTP = 'X'.
ENDCASE.
PERFORM DISPLAY_OUTPUT.
*perform write_data.
*** To get the header text in the output.
TOP-OF-PAGE.
PERFORM TOP_OF_PAGE.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM TOP_OF_PAGE.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_DATA .
SY-LSIND = 0.
P_RWBTR = P_RWBTR * -1.
REFRESH I_BSAK_INIT.
CLEAR I_BSAK_INIT.
SELECT A~LIFNR A~LAUFD A~VBLNR A~RWBTR
B~KTOKK B~NAME1
FROM REGUH AS A INNER JOIN LFA1 AS B
ON A~LIFNR = B~LIFNR
INTO CORRESPONDING FIELDS OF TABLE I_BSAK_INIT
WHERE A~LAUFD BETWEEN FR_LAUFDT AND TO_LAUFDT AND
A~XVORL <> 'X' AND
A~ZBUKR = C_BUKRS AND
A~LIFNR IN S_LIFNR AND
A~RZAWE = 'X' AND
A~RWBTR LE P_RWBTR AND
B~KTOKK IN S_KTOKK.
IF SY-SUBRC <> 0.
MESSAGE 'Records Not Found' TYPE 'I'.
LEAVE LIST-PROCESSING.
ENDIF.
*---------------------PERFORMANCE ISSUE--------------------------
delete adjacent duplicates from i_bsak_init.
IF NOT I_BSAK_INIT[] IS INITIAL.
SELECT LIFNR AUGDT AUGBL GJAHR BELNR CPUDT BLDAT XBLNR
BLART SHKZG DMBTR AUGGJ
FROM BSAK
INTO CORRESPONDING FIELDS OF TABLE I_BSAK
FOR ALL ENTRIES IN I_BSAK_INIT
WHERE BUKRS = C_BUKRS AND
AUGBL = I_BSAK_INIT-VBLNR AND
XZAHL <> 'X'.
ENDIF.
*** Selecting all line item records from BSEG table.
IF I_BSAK[] IS NOT INITIAL.
SELECT BELNR GJAHR BUZEI HKONT SHKZG DMBTR PRCTR
FROM BSEG
INTO CORRESPONDING FIELDS OF TABLE I_BSEG
FOR ALL ENTRIES IN I_BSAK
WHERE BUKRS = C_BUKRS AND
BELNR = I_BSAK-BELNR AND
GJAHR = I_BSAK-GJAHR AND
BELNR <> I_BSAK-AUGBL AND
KOART <> 'K'.
ENDIF.
*** Selecting gl account name from SKAT table.
IF I_BSEG[] IS NOT INITIAL.
SELECT SAKNR TXT50
FROM SKAT
INTO CORRESPONDING FIELDS OF TABLE I_SKAT
FOR ALL ENTRIES IN I_BSEG
WHERE SPRAS = 'E' AND
KTOPL = C_BUKRS AND
SAKNR = I_BSEG-HKONT.
ENDIF.
SORT I_BSAK BY BELNR.
SORT I_BSAK_INIT BY VBLNR.
SORT I_BSEG BY BELNR GJAHR.
*** Selecting Credit Card No. into I_XBLNR table.
LOOP AT I_BSAK.
I_BSAK-XBLNR1 = I_BSAK-XBLNR.
CLEAR: V_XBLNR.
SELECT SINGLE XBLNR FROM BKPF INTO V_XBLNR
WHERE BUKRS = C_BUKRS AND
BELNR = I_BSAK-AUGBL.
IF SY-SUBRC EQ 0.
I_BSAK-XBLNR = V_XBLNR.
ENDIF.
READ TABLE I_BSEG WITH KEY BELNR = I_BSAK-BELNR
GJAHR = I_BSAK-GJAHR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
I_BSAK-PRCTR = I_BSEG-PRCTR.
ENDIF.
READ TABLE I_BSAK_INIT WITH KEY VBLNR = I_BSAK-AUGBL BINARY SEARCH.
IF SY-SUBRC EQ 0.
I_BSAK-NAME1 = I_BSAK_INIT-NAME1.
I_BSAK-LAUFD = I_BSAK_INIT-LAUFD.
I_BSAK-KTOKK = I_BSAK_INIT-KTOKK.
ENDIF.
MODIFY I_BSAK TRANSPORTING XBLNR XBLNR1 PRCTR NAME1 LAUFD KTOKK.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form MODIFY_ITAB
* text
* --> p1 text
* <-- p2 text
FORM MODIFY_ITAB .
*** Process on internal table
LOOP AT I_BSAK.
AUTHORITY-CHECK OBJECT 'F_LFA1_GRP'
ID 'KTOKK'
FIELD I_BSAK-KTOKK.
IF SY-SUBRC NE 0.
DELETE I_BSAK WHERE KTOKK EQ I_BSAK-KTOKK.
AUTH_RESTRICT = 'X'.
CONTINUE.
ENDIF.
ENDLOOP.
IF AUTH_RESTRICT EQ 'X'.
MESSAGE S005(ZMSG).
ENDIF.
LOOP AT I_BSAK.
IF I_BSAK-SHKZG = 'S'.
I_BSAK-DMBTR = I_BSAK-DMBTR * -1.
MODIFY I_BSAK .
ENDIF.
ENDLOOP.
LOOP AT I_BSEG.
IF I_BSEG-SHKZG = 'H'.
I_BSEG-DMBTR = I_BSEG-DMBTR * -1.
MODIFY I_BSEG .
ENDIF.
ENDLOOP.
*** Default Sorting on internal table .
SORT I_BSAK BY XBLNR LIFNR BELNR.
SORT I_BSEG BY BELNR HKONT.
SORT I_SKAT BY SAKNR.
ENDFORM. " MODIFY_ITAB
*& Form DISPLAY_OUTPUT
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_OUTPUT .
*** Coding for detail output starts
CLEAR SY-LSIND.
REFRESH I_INACT.
IF G_DETAIL EQ 'X'.
APPEND 'EXPA' TO I_INACT.
ELSE.
APPEND 'COLL' TO I_INACT.
ENDIF.
IF G_SORTV EQ 'X'.
APPEND 'SORTV' TO I_INACT.
SORT I_BSAK BY LIFNR.
SORT I_BSAK_LIFNR BY LIFNR.
ELSEIF G_SORTP EQ 'X'.
APPEND 'SORTP' TO I_INACT.
SORT I_BSAK BY PRCTR.
SORT I_BSAK_PRCTR BY PRCTR.
ELSE.
APPEND 'SORTC' TO I_INACT.
SORT I_BSAK BY XBLNR.
ENDIF.
SET PF-STATUS 'STAT' EXCLUDING I_INACT.
IF V_UCOMM = 'SORTC'.
PERFORM WRITE_DATA.
ELSEIF V_UCOMM = 'SORTV' . "Subroutine for card sub total.
PERFORM WRITE_DATA_VENDOR. "Subroutine for vendor sub total.
ELSEIF V_UCOMM = 'SORTP'. "Subroutine for profit center sub total.
* PERFORM WRITE_DATA_PROFIT.
PERFORM WRITE_DATA_PROFIT_NEW. " New subroutine for profit center.
ELSE.
PERFORM WRITE_DATA.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form F_COLOR
* text
* --> p1 text
* <-- p2 text
FORM F_COLOR .
IF COL = 'X'.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
CLEAR COL.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
COL = 'X'.
ENDIF.
ENDFORM. " F_COLOR
*& Form TOP_OF_PAGE
* text
* --> p1 text
* <-- p2 text
FORM TOP_OF_PAGE .
*** Top-of-page is Common for summary and detail report.
*** To display top of page only on first page.
IF SY-PAGNO = 1 .
CALL FUNCTION 'Z_NPL_HEADING'
EXPORTING
LINE_SIZE = SY-LINSZ
HEADING1 = HEADING
HEADING2 = HEADING2.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
**** To get output columns text descprition
ULINE.
WRITE:/ SY-VLINE NO-GAP, (10) 'Vendor' NO-GAP,
SY-VLINE NO-GAP, (35) 'Name of Payee' NO-GAP,
SY-VLINE NO-GAP, (10) 'G/L Num' NO-GAP,
SY-VLINE NO-GAP, (42) 'G/L Name' NO-GAP,
SY-VLINE NO-GAP, (07) 'Profit Center' NO-GAP,
SY-VLINE NO-GAP, (16) 'Credit Card NO.' NO-GAP,
SY-VLINE NO-GAP, (10) 'Pmnt Date' NO-GAP,
SY-VLINE NO-GAP, (08) 'Doc.Type' NO-GAP,
SY-VLINE NO-GAP, (10) 'Inv.Date' NO-GAP,
SY-VLINE NO-GAP, (16) 'Invoice' NO-GAP,
SY-VLINE NO-GAP, (14) 'Amount Paid' NO-GAP,
SY-VLINE.
ULINE.
ENDIF.
ENDFORM. " TOP_OF_PAGE
*& Form WRITE_DATA
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA .
LOOP AT I_BSAK.
CLEAR WA.
MOVE-CORRESPONDING I_BSAK TO WA.
PERFORM WRITE.
AT END OF XBLNR. "Card sub total
IF G_SORTC EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP, (25) 'Credit Card Total:', I_BSAK-XBLNR ,
(35) I_BSAK-NAME1 NO-GAP.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Credit card Detail
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK loop
ENDFORM. " WRITE_DATA
*& Form WRITE_DATA_VENDOR
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_VENDOR .
LOOP AT I_BSAK_LIFNR.
CLEAR WA.
MOVE-CORRESPONDING I_BSAK_LIFNR TO WA.
PERFORM WRITE.
AT END OF LIFNR. "Vendor sub Total
IF G_SORTV EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(15) 'Vendor Total:', I_BSAK_LIFNR-LIFNR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK_LIFNR-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Vendor Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK_LIFNR-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_LIFNR loop
ENDFORM. " WRITE_DATA_VENDOR
*& Form WRITE_DATA_PROFIT
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_PROFIT .
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
LOOP AT I_BSAK_PRCTR.
READ TABLE I_BSAK WITH KEY BELNR = I_BSAK_PRCTR-BELNR
GJAHR = I_BSAK_PRCTR-GJAHR.
IF SY-SUBRC = 0.
I_BSAK_PRCTR-LIFNR = I_BSAK-LIFNR.
I_BSAK_PRCTR-NAME1 = I_BSAK-NAME1.
I_BSAK_PRCTR-XBLNR = I_BSAK-XBLNR.
I_BSAK_PRCTR-LAUFD = I_BSAK-LAUFD.
I_BSAK_PRCTR-BLART = I_BSAK-BLART.
I_BSAK_PRCTR-BLDAT = I_BSAK-BLDAT.
I_BSAK_PRCTR-XBLNR1 = I_BSAK-XBLNR1.
MODIFY I_BSAK_PRCTR TRANSPORTING LIFNR NAME1 XBLNR LAUFD BLART BLDAT XBLNR1.
ENDIF.
ENDLOOP.
*** End Of Changes By Samir On 18 Sep 08 ***
SORT I_BSAK_PRCTR BY PRCTR.
LOOP AT I_BSAK_PRCTR.
PERFORM F_COLOR.
IF G_DETAIL = 'X'.
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
READ TABLE I_SKAT WITH KEY SAKNR = I_BSAK_PRCTR-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) I_BSAK_PRCTR-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
SY-VLINE NO-GAP, (07) I_BSAK_PRCTR-PRCTR NO-GAP,
SY-VLINE NO-GAP, (16) I_BSAK_PRCTR-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) I_BSAK_PRCTR-BLART NO-GAP,
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) I_BSAK_PRCTR-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) I_BSAK_PRCTR-DMBTR NO-GAP.
WRITE: SY-VLINE.
ENDIF.
*** End Of Changes By Samir On 18 Sep 08 ***
AT END OF PRCTR. "Profit Center sub Total
IF G_SORTP EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(07) 'Profit Center Total:', I_BSAK_PRCTR-PRCTR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK_PRCTR-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Profit Center Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK_PRCTR-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_PRCTR loop
ENDFORM. " WRITE_DATA_PROFIT
*& Form WRITE
* text
* --> p1 text
* <-- p2 text
FORM WRITE .
IF G_DETAIL = 'X'.
IF WA-KTOKK = 'Z001'. " For HR Vendors
PERFORM F_COLOR.
READ TABLE I_BSEG WITH KEY BELNR = WA-BELNR GJAHR = WA-GJAHR BINARY SEARCH .
READ TABLE I_SKAT WITH KEY SAKNR = I_BSEG-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSEG-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
* SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 18 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
ELSE.
LOOP AT I_BSEG WHERE BELNR = WA-BELNR AND GJAHR = WA-GJAHR .
PERFORM F_COLOR.
READ TABLE I_SKAT WITH KEY SAKNR = I_BSEG-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSEG-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 17 Sep 08 (DEVK914671) ***
* SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 17 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) I_BSEG-DMBTR NO-GAP.
WRITE: SY-VLINE.
ENDLOOP. "End for I_BSEG loop
ENDIF. "Endif for I_PAYR-KTOKK = 'Z001'
ENDIF. "Endif for g_detail = 'X'.
ENDFORM. " WRITE
*& Form WRITE_DATA_PROFIT_NEW
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_PROFIT_NEW .
REFRESH I_BSEG_COPY.
CLEAR I_BSEG_COPY.
* DATA I_BSEG_COPY LIKE I_BSEG OCCURS 0 WITH HEADER LINE.
* I_BSEG_COPY[] = I_BSEG[].
LOOP AT I_BSEG.
MOVE-CORRESPONDING I_BSEG TO I_BSEG_COPY.
APPEND I_BSEG_COPY.
CLEAR I_BSEG_COPY.
ENDLOOP.
LOOP AT I_BSEG_COPY.
READ TABLE I_BSAK_PRCTR WITH KEY BELNR = I_BSEG_COPY-BELNR GJAHR = I_BSEG_COPY-GJAHR ."HKONT = I_BSEG_COPY-HKONT.
IF SY-SUBRC = 0.
I_BSEG_COPY-LIFNR = I_BSAK_PRCTR-LIFNR.
I_BSEG_COPY-XBLNR = I_BSAK_PRCTR-XBLNR.
I_BSEG_COPY-NAME1 = I_BSAK_PRCTR-NAME1.
I_BSEG_COPY-AUGDT = I_BSAK_PRCTR-AUGDT.
I_BSEG_COPY-AUGBL = I_BSAK_PRCTR-AUGBL.
I_BSEG_COPY-XBLNR1 = I_BSAK_PRCTR-XBLNR1.
I_BSEG_COPY-BLDAT = I_BSAK_PRCTR-BLDAT.
I_BSEG_COPY-BLART = I_BSAK_PRCTR-BLART.
MODIFY I_BSEG_COPY TRANSPORTING LIFNR XBLNR NAME1 AUGDT AUGBL XBLNR1 BLDAT BLART.
ENDIF.
ENDLOOP.
SORT I_BSAK_PRCTR BY PRCTR BELNR.
SORT I_BSEG BY BELNR.
SORT I_BSEG_COPY BY PRCTR.
DATA COUNT TYPE I.
DATA G_BELNR LIKE BSAK-BELNR.
LOOP AT I_BSEG_COPY.
CLEAR G_BELNR.
G_BELNR = I_BSEG_COPY-BELNR.
COUNT = COUNT + 1.
READ TABLE I_BSAK WITH KEY BELNR = I_BSEG_COPY-BELNR.
IF SY-SUBRC <> 0.
DELETE I_BSEG_COPY WHERE BELNR = G_BELNR."INDEX count.
ENDIF.
ENDLOOP.
* LOOP AT I_BSAK_PRCTR.
LOOP AT I_BSEG_COPY.
CLEAR WA.
MOVE-CORRESPONDING I_BSEG_COPY TO WA.
PERFORM WRITE_PRCTR.
AT END OF PRCTR. "Profit center sub Total
IF G_SORTP EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(20) 'Profit Center Total:', I_BSEG_COPY-PRCTR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSEG_COPY-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Vendor Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSEG_COPY-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_LIFNR loop
*ENDFORM. " WRITE_DATA_VENDOR
ENDFORM. " WRITE_DATA_PROFIT_NEW
*& Form WRITE_PRCTR
* text
* --> p1 text
* <-- p2 text
FORM WRITE_PRCTR .
IF G_DETAIL = 'X'.
IF WA-KTOKK = 'Z001'. " For HR Vendors
PERFORM F_COLOR.
* READ TABLE I_BSEG WITH KEY BELNR = WA-BELNR GJAHR = WA-GJAHR PRCTR = WA-PRCTR BINARY SEARCH .
READ TABLE I_SKAT WITH KEY SAKNR = WA-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) WA-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
* SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 18 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
ELSE.
* LOOP AT I_BSEG WHERE BELNR = WA-BELNR AND GJAHR = WA-GJAHR AND PRCTR = WA-PRCTR .
PERFORM F_COLOR.
READ TABLE I_SKAT WITH KEY SAKNR = WA-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) WA-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 17 Sep 08 (DEVK914671) ***
SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
* SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 17 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
* ENDLOOP. "End for I_BSEG loop
ENDIF. "Endif for I_PAYR-KTOKK = 'Z001'
ENDIF. "Endif for g_detail = 'X'.
ENDFORM. " WRITE_PRCTR
Thanks in advance
Raj.Ralph,
Thanks for the reply.
I have marked the sql statement in the code that is taking long time to run but Its my mistake not explaining the same in the description.
When I was debugging the code the below sql statement was taking long time.
IF NOT I_BSAK_INIT[] IS INITIAL.
SELECT LIFNR AUGDT AUGBL GJAHR BELNR CPUDT BLDAT XBLNR
BLART SHKZG DMBTR AUGGJ
FROM BSAK
INTO CORRESPONDING FIELDS OF TABLE I_BSAK
FOR ALL ENTRIES IN I_BSAK_INIT
WHERE BUKRS = C_BUKRS AND
AUGBL = I_BSAK_INIT-VBLNR AND
XZAHL <> 'X'.
ENDIF.
Any suggestions on the code?
Regards,
Raj. -
Process Chain taking long time in loading data in infocube
Dear Expert,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In Index creation everyday its taking long time around 9 to 10 hrs to create it
when we go in RSRV and repair the infocube thr loading of data happens fast. We are doing it(RSRV) everyday. In DB02 we have seen dat 96% tablespace is used.
Please tell permanent solution.
Please suggest its BI Issue or Basis.
Regards,
AnkitHi ,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In the above steps insted of Create Aggregates it should be Roll up Process of aggregates.
You can ask the basis team to check the Table space in the transaction db02old/db02.
Check if there is long running job in SM66/SM50 kill that job.
check there should be enough Batch process to perform the steps.
Hope this helps.
"Assigning points is the ways to say thanks on SDN".
Br
Alok -
Selective Deletion of the Cube contents in Abap Program of the PChain
Dear Experts
I need to selectively delete the contents in Basic Infocube using Process Type - ABAP Program in the Process Chain in BW 3.5
For this I have to give the Variant and Program name in the Process Type - ABAP Program in the Process Chain
The ABAP Program for this purpose can be generated automatically by the system in the the below navigation
info cube> Manage>contents > system menu(in the Top)> Status
but this abap program is changing dynamically every time and hence in the Process chain ABAP Program node is failing with error saying that that program is not available
I have tried the same way in the selective deletin navigation path also in the cube manage
Please let me know how to get the system generated program to use in the Process type-ABAP Program in Process Chain
Thanks for all in advance
KSRHi KSR,
Try this.. start a selective deletion on the cube. you will get a background job running. Get the job name from SM37.
Now write a ABAP program with the below code.
parameter: p_Job_Name type sysuuid_c.
CALL METHOD cl_rscrmbw_bapi=>exec_rep_in_batch
EXPORTING i_barepid = l_jobnam.
Execute the above program. Pass the job name which you got from SM37.
Create a variant with that job name.
Now schedule this newly created program. This should solve your issue.
Note : The job name might vary from one server to another (Dev / Qual / Prod). So if you are planning to move your process chain from Dev, then pass the Job name (in prod) as the variant in yr Dev system and then transport it.
Cheer,
Balaji Venugopal -
SSRS Reports taking long time to load
Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data, I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
10 second 15 sec
2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
more than 1 min 15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory 2) Other memory 3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Connecting to the database taking long time to connect database server
Hi
When I execute procedure i am getting the below message at bottom of the Oracle SQL Developer
"Connecting to the database"
it is taking more than 10 min plz guideHi
have you installed a normal Oracle Client also on your Host? normal Oracle Client
Did you connect with host:port:sid or with a Oracle Naming Service? through TNS Service
Can you test tnsping <alias> yes, It is working fine
Did other user have the same problem? yes
Did you connect through WAN or LAN connection? LAN (Intranet)
Can you tell more about you client/database setup?
Database setup:
OS: Window 2008 server
version: 11.1.0
Client: 11.1.0
OS: Window 2008 server
Now I am not able to execute single select query which table contains 6 records and 15 columns it is taking long time I have waited 30 min still no resutls
only one table is behaving like this remaining is working fine
Edited by: user9235224 on Oct 6, 2012 7:06 PM -
The ODS activation is taking long time
Hi,
We are on SAP NetWeaver BI 701 (Support Package 5).
We create a Z ODS, it will contain a lot of data (180.000.000 month-end) and we want to generate specific reports about it.
The activation is taking long time, I assume is because we checked the flag "SIDs Generation upon Activation". I am confused about this check. I really need it? is this check the only problem.
Thanks for you help.
VictoriaHi Victoria:
If your Z DSO is used only for staging purposes (you don't have queries based on this DSO and you send the data to another DSO or to an InfoCube) then you don't need to check the "SIDs Generation Upon Activation" box.
Even more, to achieve better performance during data loads in this scenario, you might consider using a Write Optimized DSO instead of a Standard DSO, but if you decide to take this alternative don't forget to select the "Do Not check Uniqueness of Data" box if you need to write several records with the same Semantic Key.
Regards,
Francisco Milán. -
Update ztable is taking long time
Hi All,
i have run the 5 jobs with the same program at a time but when we check the db trace
zs01 is taking long time as shown below.here zs01 is having small amount of data.
in the below dbtrace for updating zs01 is taking 2,315,485 seconds .how to reduce this?
HH:MM:SS.MS Duration Program ObjectName Op. Curs Array Rec RC Conn
2:36:15 AM 2,315,485 SAPLZS01 ZS01 FETCH 294 1 1 0 R/3
The code as shown below
you can check the code in the program SAPLZS01 include LZS01F01.
FORM UPDATE_ZS01.
IF ZS02-STATUS = '3'.
IF Z_ZS02_STATUS = '3'. "previous status is ERROR
EXIT.
ELSE.
SELECT SINGLE FOR UPDATE * FROM ZS01
WHERE PROC_NUM = ZS02-PROC_NUM.
CHECK SY-SUBRC = 0.
ADD ZS02-MF_AMT TO ZS01-ERR_AMT.
ADD 1 TO ZS01-ERR_INVOI.
UPDATE ZS01.
ENDIF.
ENDIF.
my question is when updating the ztable why it is taking such long time,
how to reduce the time or how to make faster to update the ztable .
Thanks in advance,
regards
SuniTry the code like this..
data: wa_zs01 type zs01.
FORM UPDATE_ZS01.
IF ZS02-STATUS = '3'.
IF Z_ZS02_STATUS = '3'. "previous status is ERROR
EXIT.
ELSE.
SELECT SINGLE FOR UPDATE * FROM ZS01
WHERE PROC_NUM = ZS02-PROC_NUM.
-- change
CHECK SY-SUBRC = 0.
ADD ZS02-MF_AMT TO wa_ZS01-ERR_AMT.
ADD 1 TO wa_ZS01-ERR_INVOI.
UPDATE ZS01 from wa_zs01.
ENDIF.
ENDIF.
And i think this Select query for ZS01 is inside the ZS02 SELECT statement,
This might also make slow process.
If you want to make database access always use Workarea/Internal table to fetch the data
and work with that.
Accessing database like this or with Select.... endselect is an inefficient programming. -
Simple query is taking long time
Hi Experts,
The below query is taking long time.
[code]SELECT FS.*
FROM ORL.FAX_STAGE FS
INNER JOIN
ORL.FAX_SOURCE FSRC
INNER JOIN
GLOBAL_BU_MAPPING GBM
ON GBM.BU_ID = FSRC.BUID
ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
WHERE FSRC.IS_DELETED = 'N'
AND GBM.BU_ID IS NOT NULL
AND UPPER (FS.FAX_STATUS) ='COMPLETED';[/code]
this query is returning 1645457 records.
[code]PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
| 0 | SELECT STATEMENT | | 625K| 341M| 45113 (1)|
| 1 | HASH JOIN | | 625K| 341M| 45113 (1)|
| 2 | NESTED LOOPS | | 611 | 14664 | 22 (0)|
| 3 | TABLE ACCESS FULL| FAX_SOURCE | 2290 | 48090 | 22 (0)|
| 4 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 3 | 0 (0)|
| 5 | TABLE ACCESS FULL | FAX_STAGE | 2324K| 1214M| 45076 (1)|
PLAN_TABLE_OUTPUT
Note
- 'PLAN_TABLE' is old version
15 rows selected.[/code]
The distinct number of records in each table.
[code]SELECT FAX_STATUS,count(*)
FROM fax_STAGE
GROUP BY FAX_STATUS;
FAX_STATUS COUNT(*)
BROKEN 10
Broken - New 9
Completed 2324493
New 20
SELECT is_deleted,COUNT(*)
FROM FAX_SOURCE
GROUP BY IS_DELETED;
IS_DELETED COUNT(*)
N 2290
Y 78[/code]
Total number of records in each table.
[code]SELECT COUNT(*) FROM ORL.FAX_SOURCE FSRC-- 2368
SELECT COUNT(*) FROM ORL.FAX_STAGE--2324532
SELECT COUNT(*) FROM APPS_GLOBAL.GLOBAL_BU_MAPPING--9
[/code]
To improve the performance of this query I have created the following indexes.
[code]Functional based index on UPPER (FSRC.FAX_NUMBER) ,UPPER (FS.DESTINATION) and UPPER (FS.FAX_STATUS).
Bitmap index on FSRC.IS_DELETED.
Normal Index on GBM.BU_ID and FSRC.BUID.
[/code]
But still the performance is bad for this query.
What can I do apart from this to improve the performance of this query.
Please help me .
Thanks in advance.<I have created the following indexes.
CREATE INDEX ORL.IDX_DESTINATION_RAM ON ORL.FAX_STAGE(UPPER("DESTINATION"))
CREATE INDEX ORL.IDX_FAX_STATUS_RAM ON ORL.FAX_STAGE(LOWER("FAX_STATUS"))
CREATE INDEX ORL.IDX_UPPER_FAX_STATUS_RAM ON ORL.FAX_STAGE(UPPER("FAX_STATUS"))
CREATE INDEX ORL.IDX_BUID_RAM ON ORL.FAX_SOURCE(BUID)
CREATE INDEX ORL.IDX_FAX_NUMBER_RAM ON ORL.FAX_SOURCE(UPPER("FAX_NUMBER"))
CREATE BITMAP INDEX ORL.IDX_IS_DELETED_RAM ON ORL.FAX_SOURCE(IS_DELETED)
After creating the following indexes performance got improved.
But our DBA said that new BITMAP index at FAX_SOURCE table (ORL.IDX_IS_DELETED_RAM) can cause locks
on multiple rows if IS_DELETED column is in use. Please proceed with detailed tests.
I am sending the explain plan before creating indexes and after indexes has been created.
SELECT FS.*
FROM ORL.FAX_STAGE FS
INNER JOIN
ORL.FAX_SOURCE FSRC
INNER JOIN
GLOBAL_BU_MAPPING GBM
ON GBM.BU_ID = FSRC.BUID
ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
WHERE FSRC.IS_DELETED = 'N'
AND GBM.BU_ID IS NOT NULL
AND UPPER (FS.FAX_STATUS) =:B1;
--OLD without indexes
PLAN_TABLE_OUTPUT
Plan hash value: 3076973749
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 141K| 85M| 45130 (1)| 00:09:02 |
|* 1 | HASH JOIN | | 141K| 85M| 45130 (1)| 00:09:02 |
| 2 | NESTED LOOPS | | 611 | 18330 | 22 (0)| 00:00:01 |
|* 3 | TABLE ACCESS FULL| FAX_SOURCE | 2290 | 59540 | 22 (0)| 00:00:01 |
|* 4 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 4 | 0 (0)| 00:00:01 |
|* 5 | TABLE ACCESS FULL | FAX_STAGE | 23245 | 13M| 45106 (1)| 00:09:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
1 - access(UPPER("FSRC"."FAX_NUMBER")=UPPER("FS"."DESTINATION"))
3 - filter("FSRC"."IS_DELETED"='N')
4 - access("GBM"."BU_ID"="FSRC"."BUID")
filter("GBM"."BU_ID" IS NOT NULL)
5 - filter(UPPER("FS"."FAX_STATUS")=SYS_OP_C2C(:B1))
21 rows selected.
--NEW with indexes.
PLAN_TABLE_OUTPUT
Plan hash value: 665032407
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 5995 | 3986K| 3117 (1)| 00:00:38 |
|* 1 | HASH JOIN | | 5995 | 3986K| 3117 (1)| 00:00:38 |
| 2 | NESTED LOOPS | | 611 | 47658 | 20 (5)| 00:00:01 |
|* 3 | VIEW | index$_join$_002 | 2290 | 165K| 20 (5)| 00:00:01 |
|* 4 | HASH JOIN | | | | | |
|* 5 | HASH JOIN | | | | | |
PLAN_TABLE_OUTPUT
| 6 | BITMAP CONVERSION TO ROWIDS| | 2290 | 165K| 1 (0)| 00:00:01 |
|* 7 | BITMAP INDEX SINGLE VALUE | IDX_IS_DELETED_RAM | | | | |
| 8 | INDEX FAST FULL SCAN | IDX_BUID_RAM | 2290 | 165K| 8 (0)| 00:00:01 |
| 9 | INDEX FAST FULL SCAN | IDX_FAX_NUMBER_RAM | 2290 | 165K| 14 (0)| 00:00:01 |
|* 10 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 4 | 0 (0)| 00:00:01 |
| 11 | TABLE ACCESS BY INDEX ROWID | FAX_STAGE | 23245 | 13M| 3096 (1)| 00:00:38 |
|* 12 | INDEX RANGE SCAN | IDX_UPPER_FAX_STATUS_RAM | 9298 | | 2434 (1)| 00:00:30 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
1 - access(UPPER("DESTINATION")="FSRC"."SYS_NC00035$")
3 - filter("FSRC"."IS_DELETED"='N')
4 - access(ROWID=ROWID)
5 - access(ROWID=ROWID)
7 - access("FSRC"."IS_DELETED"='N')
10 - access("GBM"."BU_ID"="FSRC"."BUID")
filter("GBM"."BU_ID" IS NOT NULL)
12 - access(UPPER("FAX_STATUS")=SYS_OP_C2C(:B1))
31 rows selected
Please confirm on the DBA comment.Is this bitmap index locks rows in my case.
Thanks.>
Maybe you are looking for
-
In fact, I can't find any folder named "Firefox" in the backup Library's "Application support" folder. Could this be somewhere else? Many thanks.
-
What is the best free word processing or office program for OS X Mountain Lion
What is the best free word processing or office program for OS X Mountain Lion?
-
How to Transport Variance Forms and Reports(created in KKO4 and KKO1)
Hello Experts, I searched for the following but could not find matching answer.Will you, therefore, suggest on the following 1. I created form in KKO4/5 2. Then I created report under above form in transaction KKO1 I did above in development and now
-
UCCE CVP 10.1 - CCB- Retry is not working
Dear All, We are facing an issue in Courtesy callback (V10.1 scripts). After setting a callback, when the system is dialing the customer phone number, if customer doesn't answer or busy then CCB is not retrying. The retry count is set as 3 correctly
-
I was just wondering if I can run the Mac OS X Server along with my regular OS X, with all of my data, and use it as a regular computer, but also use the Mac Os X Server. I just wanted to try it from a friend, just to see how it works out. Thanks a l