Send PO External email with attachement and Body text
Hi,
I need to send Purchase Orders to Vendors as PDF attachments to emails; I have successfully configured all the necessary to send external email with PDF attachement but I want to add text in the body of the email:
For Output Type NEU
Access to conditions (General Data) set to X the Replacement of text symbols is SAPMM06E/TEXT_SYMBOL_REPLACE and I fill the text in the Mail Title and Texts. The email was send with all the information : Attachement, title with PO number but with no text in the body.
Can somebody help me with this issue.
best regards
Andre
Hi,
My file is "PO Number APM - 123456.dpf". You have to config the "Define Message Types for Purchase Order" in the section Mail title and texts with NEU output type. But don't forget to put the program name SAPMM06E
Look at
[purchase order as email - SAPMM06E and TEXT_SYMBOL_REPLACE|purchase order as email - SAPMM06E and TEXT_SYMBOL_REPLACE]
Best regards
Andre
Similar Messages
-
Need to send external email with attachment for workflow 20000075
Hello Everyone,
I am new to W/F, I Need to send external email with attachment for PO Release W/F 20000075. Currently Work item is being sent to SAP inbox of required user based on PO Release strategy configuration in SPRO. I tried to create Send mail step after PO release event but I am not sure how to arrive at Recipient type in send mail step(the mail should be sent to person in the release strategy). Everything looks fine all I need to do is to send external email with attachment instead of sending work item into SAP inbox.
Your help will be highly appreciated.
Thanks.You can use extended notifications to send an e-mail message with a link to the workitem. Search for extended notifications in SDN.
Regards,
Martin -
HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL
Hello All,
This is Not a question , just attaching something I've implemented and might be interesting for few of us,
This package I'm attaching allows to send Hebrew Language email + attaching files to it.
This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
* Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
First I will attach an example of how to use it :
==================================
begin
demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
p_recipients => '[email protected]',
p_subject => 'שלום וברכה עולם',
p_data => '<hr><b>בוקר טוב</b><hr>',
p_file_name => 'but_choose_file.gif',
p_file_mime_type => 'application/pdf',
p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
end;
Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
======================================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'mail.oracle.com';
smtp_port PLS_INTEGER := 25;
smtp_domain VARCHAR2(256) := 'oracle.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Subject" MIME header
write_mime_header(conn, 'Subject', subject);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;Hello All,
Small modification - use this package and not the above
HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
============================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => 'text/html; charset=UTF-8');--p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => v_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
-- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2 is
l_str varchar2(2000);
begin
l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
l_str:=replace(l_str,'?','=3f'); --quote question marks
l_str:=replace(l_str,' ','=20'); --quote spaces
l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
return l_str;
end;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
-- Set "Subject" MIME header
-- write_mime_header(conn, 'Subject', subject);
-- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
-- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END; -
How to send Oracle report automatically in format pdf by email with subject and body?
Hello,
How to send e-mail attachment and mail other details like from ,subject,cc,to,mail body. In Oracle Developer Suite 10g?
Regards.did you try to run report parameter form = yes ,
put to the parameter form following system parameters and set et.
run report with belove value
- DESTYPE = MAIL
- DESFORMAT = PDF
- DESNAME = mail adres
then according to the result ,rearrange your report forms side while invoke report from forms
- SET_REPORT_OBJECT_PROPERTY( reportobject_id , DESTYPE , mail ) ;
- SET_REPORT_OBJECT_PROPERTY( reportobject_id , DESFORMAT , PDF ) ;
- SET_REPORT_OBJECT_PROPERTY( reportobject_id , DESNAME , mail adres ) ; -
Sending mail with attachment and body.
Hi Experts,
I have a requirement of sending a mail with an attachment and also the mail will have a body whose content will be same as that in the attachment.Subject of the mail will also be configured dynamically.Though I am able to send the mail with the attachment but I am not able to configure the body whose content will be same as that of the attachment.
I have unchecked the "Use Mail Package" and has hard-coded the "TO","From" field for sending the mail with attachment.
Can you please check and let me know how to configure the body which will be same as that of the attachment.
Thanks and Regards
Atanu MazumdarHi,
Use MTB module and then one of the parameter which can allow you to send message in attachment as well as in message body.
Transform.ContentDisposition: it helps us to decide if we want to send the payload as an attachment or in the message body. If we give the Parameter value as u201Cattachmentu201D then we will have the payload attached in the mail and if we assign this value as u201Cinlineu201D the payload will go in the mail body.
Hope this helps you..
Regards.... -
Send Email With Attachment And Recordset Recipients
When I try to send an email with an uploaded attachment, then attach it to the email being sent out to a recordset, my server tells me it has exhausted all its memory to send out the file. The pdf is 10 megs and the amount of ram allowed to be used is 256 megs.
The problem is that it seems to be that the way in which it is goign about sending the email to a recordset is that, it combines the attachment for all the email address. So say i have 35 people in the recordset with a 10 meg pdf, turns into 350 of ram.
Has anyone had any experience with this?Consider using UTL_MAIL package:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm
(Note: it's not installed and configured by default, but the scripts are supplied with the Oracle database, see documentation for instructions) -
Send email with Attachment and Message in Body
Hi All,
I'm sending an email (Receiver Email Adapter) with a Zipped CSV file as an attachment. I used the following modules to achieve this.
1 localejbs/AF_Modules/StrictXml2PlainBean Local Enterprise Bean strict2plain
2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean contentType
3 localejbs/AF_Modules/TextCodepageConversionBean Local Enterprise Bean Transform
4 localejbs/AF_Modules/PayloadZipBean Local Enterprise Bean zip
5 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Transform Conversion.charset ISO-8859-1
contentType Transform.ContentDispostion attachment;
contentType Transform.ContentType text/plain;charset="UTF-8";name="Attachment.csv"
contentType Transform.Description file
strict2plain DATA.endSeparator \r\n
strict2plain DATA.fieldSeparator ,
strict2plain fieldNames Result
strict2plain recordTypes DATA
zip zip.filenameKey contentType
zip zip.mode zipAll
My problem now is how to put text content in the body? Please help.> My problem now is how to put text content in the body? Please help.
This is not possible with standard.
You have to write an adapter module for this. -
How i can send email with attachment ?
any body can help me ..............??????????????????
Hello,
please, use "Search" utility in the forum before ask something like this...
I've just tried with :
"send email with attachment"
and ... you have the solution in the first result...
Regards,
Jose. -
How to send an email with attachment to dynamic emial address using PL/SQL
Hi,
i want to send an automated email with attachment everyday to differnet people so number people is not static.
so is it any way using PL/SQL ?
thanks for your support!i want to send an automated email with attachment everyday to differnet people so number people is not static.
Why? Explain it.
You can create a table and store your email id through front-end application day to day.
The table should look like this ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.04
satyaki>
satyaki>
satyaki>create table email_master
2 (
3 email_grp_header varchar2(30) not null,
4 craete_time timestamp,
5 constraints pk_header primary key(email_grp_header)
6 );
Table created.
Elapsed: 00:00:02.12
satyaki>
satyaki>create table email_chld
2 (
3 email_grp_header varchar2(30) not null,
4 email_recepient varchar2(100),
5 craete_time timestamp,
6 constraint fk_header foreign key(email_grp_header) references email_master(email_grp_header)
7 );
Table created.
Elapsed: 00:00:00.09
satyaki>
satyaki>
satyaki>insert into email_master values('GRP_INVENTORY',systimestamp);
1 row created.
Elapsed: 00:00:00.07
satyaki>
satyaki>
satyaki>insert into email_master values('GRP_PURCHASE',systimestamp);
1 row created.
Elapsed: 00:00:00.03
satyaki>
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.04
satyaki>
satyaki>select * from email_master;
EMAIL_GRP_HEADER CRAETE_TIME
GRP_INVENTORY 24-OCT-08 08.55.36.190000 PM
GRP_PURCHASE 24-OCT-08 08.55.54.481000 PM
Elapsed: 00:00:00.18
satyaki>
satyaki>
satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
1 row created.
Elapsed: 00:00:00.07
satyaki>
satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
1 row created.
Elapsed: 00:00:00.04
satyaki>
satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
1 row created.
Elapsed: 00:00:00.03
satyaki>
satyaki>insert into email_chld values('GRP_PURCHASE','[email protected]',systimestamp);
1 row created.
Elapsed: 00:00:00.03
satyaki>
satyaki>insert into email_chld values('GRP_PURCHASE','[email protected]',systimestamp);
1 row created.
Elapsed: 00:00:00.11
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.05
satyaki>
satyaki>select * from email_chld;
EMAIL_GRP_HEADER EMAIL_RECEPIENT CRAETE_TIME
GRP_INVENTORY [email protected] 24-OCT-08 08.56.46.107000 PM
GRP_INVENTORY [email protected] 24-OCT-08 08.57.03.551000 PM
GRP_INVENTORY [email protected] 24-OCT-08 08.57.36.277000 PM
GRP_PURCHASE [email protected] 24-OCT-08 08.58.06.129000 PM
GRP_PURCHASE [email protected] 24-OCT-08 08.58.26.900000 PM
Elapsed: 00:00:00.10
satyaki>And, then based on the group header you can get the list of recipient and use it dynamically inside your PL/SQL Application.
Regards.
Satyaki De. -
Alv result send to External email adreess
hi,
i want to send Alv grid result send to External email adreess.n e body help me how can i do thisuse the code:
FORM docu_send_email USING pv_otfdata TYPE tsfotf
pv_emailid TYPE any
pv_formname TYPE any.
DATA: lv_filesize TYPE i,
lv_buffer TYPE string,
lv_attachment TYPE i,
lv_testo TYPE i.
DATA: li_pdfdata TYPE STANDARD TABLE OF tline,
li_mess_att TYPE STANDARD TABLE OF solisti1,
li_mtab_pdf TYPE STANDARD TABLE OF tline,
li_objpack TYPE STANDARD TABLE OF sopcklsti1,
li_objtxt TYPE STANDARD TABLE OF solisti1,
li_objbin TYPE STANDARD TABLE OF solisti1,
li_reclist TYPE STANDARD TABLE OF somlreci1,
li_objhead TYPE soli_tab.
DATA: lwa_pdfdata TYPE tline,
lwa_objpack TYPE sopcklsti1,
lwa_mess_att TYPE solisti1,
lwa_objtxt TYPE solisti1,
lwa_objbin TYPE solisti1,
lwa_reclist TYPE somlreci1,
lwa_doc_chng TYPE sodocchgi1.
CONSTANTS: lc_u TYPE char1 VALUE 'U',
lc_0 TYPE char1 VALUE '0',
lc_1 TYPE char1 VALUE '1',
lc_pdf TYPE char3 VALUE 'PDF',
lc_raw TYPE char3 VALUE 'RAW',
lc_ordform TYPE char15 VALUE 'ZORDCONFIRM_01',
lc_attachment TYPE char10 VALUE 'ATTACHMENT'.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = lc_pdf
max_linewidth = 132
IMPORTING
bin_filesize = lv_filesize
TABLES
otf = pv_otfdata
lines = li_pdfdata
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT li_pdfdata INTO lwa_pdfdata.
TRANSLATE lwa_pdfdata USING ' ~'.
CONCATENATE lv_buffer lwa_pdfdata INTO lv_buffer.
CLEAR lwa_pdfdata.
ENDLOOP.
TRANSLATE lv_buffer USING '~ '.
DO.
lwa_mess_att = lv_buffer.
APPEND lwa_mess_att TO li_mess_att.
CLEAR lwa_mess_att.
SHIFT lv_buffer LEFT BY 255 PLACES.
IF lv_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Object with PDF.
REFRESH li_objbin.
li_objbin[] = li_mess_att[].
DESCRIBE TABLE li_objbin LINES lv_attachment.
Object with main text of the mail.
lwa_objtxt = space.
APPEND lwa_objtxt TO li_objtxt.
CLEAR lwa_objtxt.
DESCRIBE TABLE li_objtxt LINES lv_testo.
Create the document which is to be sent
lwa_doc_chng-obj_name = text-008.
lwa_doc_chng-obj_descr = text-008.
lwa_doc_chng-sensitivty = lc_0.
lwa_doc_chng-obj_prio = lc_1.
lwa_doc_chng-doc_size = lv_testo * 225.
Pack to main body.
CLEAR lwa_objpack-transf_bin.
header
lwa_objpack-head_start = 1.
The document needs no header (head_num = 0)
lwa_objpack-head_num = 0.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num = lv_testo.
lwa_objpack-doc_type = lc_raw.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
Create the attachment.
Fill the fields of the packing_list for the attachment:
lwa_objpack-transf_bin = gc_x .
header
lwa_objpack-head_start = 1.
lwa_objpack-head_num = 1.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num = lv_attachment.
lwa_objpack-doc_type = lc_pdf.
lwa_objpack-obj_name = lc_attachment.
lwa_objpack-obj_descr = text-008.
lwa_objpack-doc_size = lv_attachment * 255.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
lwa_reclist-receiver = pv_emailid.
lwa_reclist-rec_type = lc_u.
lwa_reclist-notif_del = gc_x.
lwa_reclist-notif_ndel = gc_x.
APPEND lwa_reclist TO li_reclist.
IF li_reclist IS NOT INITIAL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lwa_doc_chng
put_in_outbox = gc_x
TABLES
packing_list = li_objpack
object_header = li_objhead
contents_bin = li_objbin
contents_txt = li_objtxt
receivers = li_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8. -
Friends on Android galaxy do not receive my emails with attached photos sent from my iPhone. Why
I have an iPhone 4 running 6.1 OS. Several times I have taken photos with my iPhone and then tried to email them from my iPhone to friends using Android Galaxy. They never receive the emails. When I select the photo to be emailed from "Camera Roll", several options appear (Mail, Message, Photo Stream, Twitter, Facebook etc). I select "Mail", then select an email address from my contact list, add some text to the message, select the size of photo and send. The email with attached photo is never received. Any idea why?
Well, your response about MMS is beyond my understanding unfortunately. Don't understand too well this issue of MMS and IMessage. I checked my settings and "Send as MMS" was OFF. I have turned it ON and tried to re-send the photos. No word yet if it was received.. Also, the "send and receive" addresses in the "Messages" setting only included my "@me" email address, and not my Yahoo address, which I am trying to add. It doesn't seem to be able to complete the verification process for that Yahoo address (it remains in a perpetual state of "verifying"), although it did add an "icloud" address, and my cell phone number. I have my "cellular data" turned OFF because I am in the States (I am Canadaian) and wish to restrict roaming charges. So are you saying that I cannot send photo attachments in emails from my iPhone, while connected to the in-house internet modem/router - ie., that I can do so only if my "cellular data" setting is ON? Then why do the messages still appear in the SENT folder? Do the settings on the recipient phone have an impact? It doesn't seem so because they were able to receive the messages from the PC/Hotmail source.
-
How to send email with attachment
Hi friends,
I am using soa 11.1.1.7.0
Jdev 11.1.1.7.0
WebLogic:- 10.3
I want to generated email with attachment in BPEL 11g. Below is what i did in my bpel process
Create simple hello world bpel process.
In email activity below details are given
<scope name="Email1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<sequence name="Sequence1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:FromUserName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="bpws:getVariableData('inputVariable','payload','/client:process/client:subject')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="bpws:getVariableData('inputVariable','payload','/client:process/client:to')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from><Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"><MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/mixed</MimeType><ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"><MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"> <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"><MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/><ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/><BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/></BodyPart> <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"><MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/><ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/><BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/></BodyPart></MultiPart></ContentBody></Content></from>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[1]/ns1:MimeType"/>
</copy>
<copy>
<from expression="bpws:getVariableData('inputVariable','payload','/client:process/client:body')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[1]/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/plain')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:MimeType"/>
</copy>
<copy>
<from expression="string('SampleStudent.txt')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:BodyPartName"/>
</copy>
<copy>
<from expression="concat('file:///', bpws:getVariableData('inputVariable','payload','/client:process/client:attachmentURI'))"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:ContentBody"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
portType="ns1:NotificationService"
partnerLink="NotificationService1"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"
operation="sendEmailNotification"/>
</sequence>
</scope>
<!--
Asynchronous callback to the requester. (Note: the callback location and correlation id is transparently handled using WS-addressing.)
-->
<invoke name="callbackClient"
partnerLink="sendingemailwithattachmentsprcs_client"
portType="client:SendingEmailWithAttachmentsPrcsCallback"
operation="processResponse" inputVariable="outputVariable"/>
</sequence>
</process>
I am able to generate Email with attachment but i cant see the data in the attached file.
I think i need to convert the data before sending as a attachment. Could someone please help me in generating the txt files.
Regards,
Rajireddy.Re: sending fax
-
Send Email with Attachment in BSP?
Hello,
I have trouble about sending Email in BSP .
I don't know how to <b>Send Email with attachment in BSP</b> . Please give me some advice .
Thank you very much!Here is a sample application..
<b>Layout</b>
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Send Mail with Attachment " >
<htmlb:form id = "form1"
encodingType = "multipart/form-data" >
<htmlb:label for = "MAILTO"
text = "Mail to" />
<htmlb:inputField id = "MAILTO"
size = "20"
value = "<%= mail_to %>"
type = "string" />
<htmlb:fileUpload id = "myUpload"
onUpload = "HandleUpload"
upload_text = "Attach"
size = "90" />
</htmlb:form>
</htmlb:page>
</htmlb:content>
<b>Page attributes:</b>
mail_to TYPE ADR6-SMTP_ADDR E-Mail Address
<b> Event handler OnInputprocessing..</b>
DATA: fileUpload TYPE REF TO CL_HTMLB_FILEUPLOAD,
file_content TYPE XSTRING,
file_length TYPE STRING,
file_mime_type TYPE STRING,
file_name TYPE STRING.
fileUpload ?= CL_HTMLB_MANAGER=>GET_DATA(
request = request
id = 'myUpload'
name = 'fileUpload' ).
if fileUpload is not INITIAL.
file_name = fileUpload->file_name.
file_mime_type = fileUpload->file_content_type.
file_length = fileUpload->file_length.
file_content = fileUpload->file_content.
mail_to = request->get_form_field( `MAILTO` ).
* Send mail part..
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
* Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lt_att_content_hex type solix_tab,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please find the attached report.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Visit report' ).
data: data_tab type solix_tab,
p_data type XSTRING.
* Pass the data of the document we have uploaded..
p_data = file_content.
call function 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = p_data
TABLES
binary_tab = data_tab.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Visit Report'
i_att_content_hex = data_tab ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
* Add attachment
* Pass the document to send request
lo_send_request->set_document( lo_document ).
* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value '[email protected]'.
* Set sender
l_send = mail_to.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
* Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
** Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
endif.
Hope this will be helpful.
Raja T -
Problem by Sending an Email with attached Adobe Interactive Form (Code)
Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
But it doens`t send the email.
Can anybody help me please???
Kevin
Here my Code:
Report FP_EXAMPLE_01
Printing of documents using PDF based forms
REPORT z_example_02.
Data declaration
DATA: carr_id TYPE sbook-carrid,
customer TYPE scustom,
bookings TYPE ty_bookings,
connections TYPE ty_connections,
fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
error_string TYPE string,
l_booking TYPE sbook,
t_sums TYPE TABLE OF sbook,
l_sums LIKE LINE OF t_sums,
fp_formoutput TYPE fpformoutput.
PARAMETER: p_custid TYPE scustom-id DEFAULT 38.
SELECT-OPTIONS: s_carrid FOR carr_id DEFAULT 'AA' TO 'ZZ'.
PARAMETER: p_form TYPE tdsfname DEFAULT 'FP_EXAMPLE_01'.
PARAMETER: language TYPE sfpdocparams-langu DEFAULT 'E'.
PARAMETER: country TYPE sfpdocparams-country DEFAULT 'US'.
Get data from the following tables: scustom(Flight customer)
sbook (Single flight reservation)
spfli (Flight plan)
SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
CHECK sy-subrc = 0.
SELECT * FROM sbook INTO TABLE bookings
WHERE customid = p_custid
AND carrid IN s_carrid
ORDER BY PRIMARY KEY.
SELECT * FROM spfli INTO TABLE connections
FOR ALL ENTRIES IN bookings
WHERE carrid = bookings-carrid
AND connid = bookings-connid
ORDER BY PRIMARY KEY.
Print data:
First get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = p_form
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
MESSAGE e001(fp_example).
ENDIF.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = language.
fp_docparams-country = country.
*fp_docparams-fillable = 'X'.
*fp_docparams-langu = 'E'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
*fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
currency key dependant summing
LOOP AT bookings INTO l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
COLLECT l_sums INTO t_sums.
ENDLOOP.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
customer = customer
bookings = bookings
connections = connections
t_sums = t_sums
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
IMPORTING
e_adserrstr = error_string.
IF NOT error_string IS INITIAL.
we received a detailed error description
WRITE:/ error_string.
EXIT.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*********************Send the form*******************
*********************to the Customer*****************
*********************via Email***********************
*IF i_down = abap_true.
DATA: filename TYPE string,
path TYPE string,
fullpath TYPE string,
default_extension TYPE string VALUE 'PDF'.
Data:
lt_att_content_hex TYPE solix_tab.
*DATA: data_tab TYPE TABLE OF x255.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = fp_formoutput-pdf
TABLES
binary_tab = lt_att_content_hex.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL.
DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Vendor Payment Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Vendor Payment Form'
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
lo_send_request->set_document( lo_document ).
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_send TYPE adr6-smtp_addr VALUE '[email protected]'. "Absender SENDER
lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient type ref to if_recipient_bcs value is initial.
Data:
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
*lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
*lo_send_request->add_recipient(
*EXPORTING
*i_recipient = lo_recipient
*i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'.Hi Kevin,
Please try this code to send your mail, i wrote it and works well in many system.
Take care if in your profile you got an e-mail adress define .
Take care also of trnasaction SCOT customizing, are you able to send mail to e-mail adress ?
Let me know if it's works.
Best regards.
<i>**----
CLASS-DEFINITIONS
DATA: send_request TYPE REF TO cl_bcs.
DATA: document TYPE REF TO cl_document_bcs.
DATA: sender TYPE REF TO cl_sapuser_bcs.
DATA: recipient TYPE REF TO if_recipient_bcs.
INTERNAL TABLES
DATA: l_mailtext TYPE soli_tab.
DATA: iaddsmtp TYPE TABLE OF bapiadsmtp.
DATA: ireturn TYPE TABLE OF bapiret2.
VARIABLES
DATA: mail_line LIKE LINE OF l_mailtext.
DATA: bapiadsmtp TYPE bapiadsmtp.
DATA: subject TYPE so_obj_des.
DATA : att_subject TYPE so_obj_des.
DATA : w_except TYPE REF TO cx_root .
CONSTANTS : c_defmail TYPE ad_smtpadr VALUE
'[email protected]' .
FIELD-SYMBOLS : <smtp> TYPE bapiadsmtp.
*Convert the pdf given by function module into Binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = output-pdf "PDF file from function module
TABLES
binary_tab = hexa.
*Set subject of the mail
subject = 'Exemple de PDF interactif'.
Set text of the mail
mail_line = 'Merci de remplir le formulaire et nous le retourner'.
APPEND mail_line TO l_mailtext .
Set the name of the attached document
att_subject = 'Template du PDF'.
TRY.
Create persistent send request
send_request = cl_bcs=>create_persistent( ).
Get sender object
sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
Read the E-Mail address for the user
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = sy-uname
TABLES
return = ireturn
addsmtp = iaddsmtp.
LOOP AT iaddsmtp ASSIGNING <smtp> WHERE std_no = 'X'.
CLEAR bapiadsmtp.
MOVE <smtp> TO bapiadsmtp.
ENDLOOP.
CASE bapiadsmtp-e_mail.
WHEN space.
No adress main for user, so send it to the default mail adress
recipient =
cl_cam_address_bcs=>create_internet_address( c_defmail ).
WHEN OTHERS.
recipient =
cl_cam_address_bcs=>create_internet_address( bapiadsmtp-e_mail ).
ENDCASE.
Add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'
i_copy = space
i_blind_copy = space
i_no_forward = space.
Set that you don't need a Return Status E-mail
CALL METHOD send_request->set_status_attributes
EXPORTING
i_requested_status = 'E'
i_status_mail = 'E'.
set send immediately flag
send_request->set_send_immediately( 'X' ).
*Build Document
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = l_mailtext
i_subject = subject ).
add attachment to document
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = att_subject
i_att_content_hex = hexa.
Add document to send request
CALL METHOD send_request->set_document( document ).
Send document
CALL METHOD send_request->send( ).
COMMIT WORK.
CATCH cx_send_req_bcs INTO w_except.
CATCH cx_address_bcs INTO w_except.
CATCH cx_document_bcs INTO w_except.
ENDTRY.</i> -
Sending Mail with attachment and preserving the order of attachment
Hi Everyone!!!!!!
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;
I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.
Sorry for stuff essay and thanks in advance!!!!!!!!!!!>
Please update your forum profile with a real handle instead of "974850".
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.Always post code using <tt>\...\</tt> tags as described in the FAQ.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.I see no code that attaches anything to email messages. What code is used to do this? Why are the files being written to the file system?
Maybe you are looking for
-
I need to reset my ipod but i cant do that because my sleep button doesnt work any more and plus i dont remember my password.HELP
-
Every time i try to add content to itunes it crashes
Every time I try to add files or a folder to my Itunes it crashes.. I even tried to reinstall...
-
Feb 28, 2003 2:36 PM I'd like to derive a set of screens from a defaultscreen that I made. In order not to type the same code again for all my screens. I use about 12 screens in my application. Something like this public class Screen extends JFrame p
-
I realise this is an OEM board for Medion, and Medion supplied the computer system to PCWorld, so the support must be done by PC World, and if you know them you realise my problem getting information. Anyway, there are 3 PCI slots, one blue amd two g
-
No audio & many songs in library now say Read o
everything was fine until I tried to load a CD in another format....the songs transferred to my library but as read only, and this seems to have transferred over to lots of other tracks in my library and across the board, something will appear to be