Services tab in Service Purchase Order for Limit SC is not filled in

Hello All
As per the standard behaviour if a Free text SC is created for Services , the PO is created with one line item having description as " service item " and under the Services tab we can see the line items.
But when we create a SC from Limit for Services ( if we select Confirmation and Invoice ), The PO is created just like normal PO with item category as "D" and we do not see any line item in the Services tab in the PO.
Could you please let us know why this difference between Free text SC and for Limit SC.
Thanks in Advance.
Regards
Bharath Valleri

Hello Bharath,
What you describe is standard.
1- Limit SC
A limit item in SRM can give two kinds of R/3 PO items:
b- If you set "Invoice and confirmation" during Limit SC item creation, this means you will confirm your item, so R/3 PO item for service can only be created as category item "D",
Nevertheless, for your R3 PO item, you have populated an expected value (and you can fill in also an overall limit if check box "Unlimited" was not set at SC item creation).
That's why "Service" tab is empty. The "Limit" tab is populated in this case: confirmation will be done according to PO item expected value and not according to PO item quantity
a- If you set "Invoice only"during Limit SC item creation, this means confirmation is not allowed for you item, so R/3 PO item can only be created as item "B" (blanket). Blanket PO cannot be confirmed.
2- Free text SC
For a free text SC item with product type "Service", R/3 PO item will be a "D" category item.
"Service" tab is filled in with quantity and net price: confirmation will be done according PO item quantity.
So, main difference between Free text SC and Limit SC is quantity or expected value based confirmation.
Regards.
Laurent.

Similar Messages

SMBLN filed blank in case of service Purchase order for MSEG

Hi expert
SMBLN (Number of Material Document) filed blank in case of service Purchase order for MSEG.
if i check for normal po i get my number for which i have doing reverse.
Case example
when i check in mseg for Mvt 106 Material Docu No , in the field SMBLN i get for the Material Docu No of 105 for normal PO.
when i check in mseg for Mvt 102 Material Docu No , in the field SMBLN i dont get for the Material Docu No of 105 for Servicel PO
Regard
Nabil
Edited by: sayednabil on Apr 11, 2011 11:50 AM

Hello andrewjkasten,
It's good to hear from you again, although I truly wish it were to share a more pleasant experience than when we previously conversed. It is always great to keep an eye on sales however you can so you don't miss them! I'm sorry to hear a technical issue may have caused your order to not reach our systems and missing out on a great sale price!
Using the information you registered with the forum, I've sadly been unable to locate your computer order. With that said, I would like to look further into this and am sending you a private message to gather the necessary information. I look forward to your correspondence!
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Missing 'Excise Duty' tab folder in purchase order for a ED material

Hi,
We just applied a enhancement pack on our test environment.
We are now testing PO creation (ME21n) for a ED material, but this tab folder is nowhere to find now
Any idea how to resolve this? I can't find a OSS note.
Thanks in advance.

check your Tax procedure has your cdn type JMOP .
in FV 11 maintain cdn records for both set off and %.
follow the below link to understand better. Do the check and it will work.
SAP CIN MM_check point_Logic_Q&A
regards
manu

Unlimited tolerance is automatically ticked in service purchase order and is in diplay mode

Hi,
In service purchase order in the delivery tab, I am unable to view underdelivery tolerance and unlimited tab is ticked automatically and it is in display mode . How to remove the unlimited tick mark for the service purchase order for a particular doc type. Please find the attached screenshot.
Regards
Badri

Its proposed by system,
If you do not tick the option, then you can make only one service entry sheet.
Please read the discussion No Limit and unlimited indicator in PO
And Unlimited Overdelivery with Item Category D
Here you can find the why this option should be ticked.
Regards
Dev

Service Purchase Order

Hi MM Gurus,
Scenario is
Service Purchase Order for Travelling Charges ,
Service maintained at service tab is travelling charges 12 nos for 38000/- each
item cat D .
In main text of PO item qty appears is 1 nos and amount is 456000/- ok.
Service tax ia applicable on it is 12.36% ok
But base amount for this is 40% of 38000/- that means service tax is applicable on 40% of gross amount.
I am using manual condition Zser that is base service amount.
Up to this it is working fine.
Service Entry sheet filled, accepted and saved .ok
there are two service sheets 10000283 and 100000284 for example
During MIRO if i took the ref of service entry sheet and try to post the purchase order the tax amount system calculates is based on total amount that is 4560000/- and not on 38000/-, due to this i am facing problems in invoice verification.
Pls suggest
With regards
Nagarjuna Reddy

Dear Prashant,
No I have checked once again, Tax value is not getting divided as per individual service entry.
means that for total 10 service sheets are there and during miro is entered with referce of service entrysheet, tax value is showing means for each entry sheet total tax of 10 entry sheet of 40% amount is shown
Pls suggest
Nagarjuna Reddy

Use of Contract in the Service purchase order

Dear Experts,
I am assigning the Contract for the services as a limit in the service purchase order for a specific service. The system is not checking the limit against the same at the time of the service entry sheet. I do not have the unlimited delivery checked for the line item.
How it is possible to check the limit against the contract upto a certain limit.
E.g. I have a total contract of 20000 USD for 12 months but in this month I only want to avail the services upto 2000USD against the same contract.
How is it possible in the system

If you are with value contract of 2000 usd then it will allow upto that?
You can avial the service as per the coversion to Po with what ever the value with activity.

How to Close Service Purchase Orders

Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh Panchal

Hi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil

Cannot Delete / Cancel / Reverse Service Purchase Order. Please Help....

If you create a service entry sheet, process the service entry
approval,post an invoice for an amount greater than the Service entry
then, cancel
the entry sheet and add a new service specification (i.e. same entry
sheet), the following problem occur:
1. You can no longer cancel the invoice if the services of the entry
sheet are deleted.
2. After changing the entry sheet and renewed acceptance of services
performed, a posting takes place where the value differs from the
value of the entry sheet.
Steps to Reproduce:
1. Create a Service Purchase Order of $2,675.00
2. Create a Service Entry against the Purchase Order for $2,675.00
3. Approve Service Entry against the Purchase Order for $2,675.00
a/c postings Dr Expense $2,675.00
Cr GR/IR $2,675.00
4. Create an Invoice against the Service Purchase Order for $6,452.50
a/c postings Dr Expense $3,777.50
Dr GR/IR $2,675.00
Cr Vendor $6,452.50
5. Create Credit Memo $1,537.00
6. Revoke the Service Entry against the Purchase Order for $2,675.00
I am expecting the Reversal of the Service Entry figure is $2,675.00, but instead, the Reversal of the Service Entry figure is $1,537.00. Why is that so? I need to be able to Reverse/Delete the PO. Please help...
Thank you.

Hi,
please check the folowing notes for further information:
856682    Goods receipt document cancelled with incorrect value
499575    FAQ: Invoice verification/goods receipt in service
440942    GR cancellation not equal to GR
Regards,
Edit

Import Tab for Service Purchase Order

Dear Friends,
Is it possible to bring Import Tab (Foriegn Trade) at item level of Service Purchase Order. Please let me know the configuration step.
Regards,
S.Suresh

Hi Suresh ,
Follow the below customsing path :
MMSPROPurchasingForeign Trade/CustomsControl Foreign Trade Data in MM and SD Documents--Import Screens In Purchasing Document
Regards
Ramesh Ch

Purchase order for services

When creating a purchase order for services, I am entering services lines in the SERVICES TAB, I would like to structure the services in the service specification into a hierarchy of outline levels. How I can do this? How can I activate the Service Specification outline ?
Thanks

Hello,
You can use an outline only in t the 'Full Screen: service'. In the Services full screen, you can choose 'Outline On/Off' to show and hide the service overview. You ser the width of the service overview as desired and when entering the transaction, system displays the settings selected before leaving the transaction.
If you select an outline level, the data area of the services displays the relevant service lines. You can choose 'Services' to display at outline level whether service line exist at outline level.
Regards,

DELIVERY COMPLETED indicator for Services Purchase Order

hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase order via BAPI or Function Module?
<i>I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER</i>.
can anyone help me?
thanks in advance,
Eliana

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

Issue when uploading Purchase Order for Services (LSMW and BAPI_PO_CREATE1)

Hi,
I`m getting the error message "In case of account assignment, please enter acc. assignment data for item" when trying to updoad a Service Purchase Order via LSMW using BAPI_PO_CREATE1.
I'm using two files, one for header and item data and the other one to service lines. Even the account assignment is maintained the error persists. What am I doing wrong?
Regards,
Everton

Hi
Check If you are giving the Account Assignment Number correct.
I mean....for a value...to be recognized by the BAPI, the number should be exactly same as it is stored in DATABASE.
For example: the number stored in database is 0000123...and you enter 123..in the program, then BAPI would fail to recognise the number. The value should be exactly as the field length.
Regards,
Vishwa.

Delivery completed indicator in purchase order for service item

How can I make the delivery completed indicator (EKPO-ELIKZ) in a purchase order for a service item ready for direct changes.
Per default this field is hidden on purpose for service items (according to SAP note 735404). Please inform me of customizing entry where that can be changed!
Thanks,
Johnny

delivery completed indicator only gives information for MRP ( That not consider balance qty as onorder stock), it has no control on GR, so I am not sure what you will achieve to mark it in service PO?

Transfer of tax indicator to purchase order for service items in shopping cart

Hi all.
I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
Thanks in advance.

Hi again...
I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
Regards.

Pricing determination for services purchase order

Hi All,
Please provide the configuration and assignment steps involved for service Purchase orders.
Regards
Vijay

Hi Vijay
Please check the following links,
Service Pricing Conditions
Hope Help U..
Regards
Vikrant

Services tab in Service Purchase Order for Limit SC is not filled in

Similar Messages

Maybe you are looking for