SessionID with different 13 digit value at the end for evry request

Hi all,
Our session descriptor looks like this
<wls:session-descriptor>
<wls:timeout-secs>1200</wls:timeout-secs>
<wls:debug-enabled>true</wls:debug-enabled>
<wls:id-length>100</wls:id-length>
<wls:cookie-max-age-secs>1200</wls:cookie-max-age-secs>
<wls:persistent-store-type>REPLICATED_IF_CLUSTERED</wls:persistent-store-type>
<wls:sharing-enabled>false</wls:sharing-enabled>
</wls:session-descriptor>
However the session id has a extra 13 digit value appended at the end.
Please see some sample session ids printed from debug logs.
these vary in different servers and are causing the session replication to fail .Any reason why such an anamoly happens
Session ID:nzsQP7BQmKppYpqyGzZZLd61lWQyDnJgq5n8NgRG0vG1cb6FTfX7Qs6K1nhvkyzh2wQdGnhr2knXsPRXTrWMpLVMJGzn9vBTTwdM!-1438928405!1009911873!1337672080496
Session ID:p2NJP7GHyzRNTglRvV8hQLsdpxJfRNPW3hRGnlXpgy7Y2KmkyFzK4dZQQQmpQ17Mhm2bhT0vqvsG1MK1r32vkmG2Fq5RcQn0S7Pg!-1438928405!1009911873!1337672743271

So the engineer came and, of course, everything was working ok. He did fit some kind of RF filter on my main socket, and 'changed the pair' on one of the outside cables. Since then, I've only had a noisy line once, and seem to have been connected for 3 days solid, which is a record!
I've switched back to my BT Home hub 3, which guavas me more stats. The line has previously given me up to 6mb/s, now only getting 1.6.
Do you think, now the line seems more stable, with the stats below I should be able to maintain a higher speed now?
Thanks
Line state: Connected
Connection time: 3 days, 02:19:39
Downstream: 1.601 Mbps
Upstream: 444.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.3 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 17.7 dB / 22.6 dB
Line attenuation (Down/Up): 44.8 dB / 27.0 dB
Output power (Down/Up): 18.6 dBm / 12.6 dBm
FEC Events (Down/Up): 3144673 / 0
CRC Events (Down/Up): 14434 / 38
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 111873 / 10
Error Seconds (Local/Remote): 1011 / 4

Similar Messages

Can I backup two devices (with different documents) to one iCloud account? For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!

Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

What is the best way to deal with different audio sample rates on the same timeline ?

what is the best way to deal with different audio sample rates on the same timeline ?

You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

Restrict values on the matchcode for 0COMP_CODE

Hello all,
I have the following scenario; I have to restrict information access to users by country and company code.
A user can have access to different countries by means of the assignment of the corresponding roles.
When a user execute a query, the variable screen for country appears with the different countries the user is able to display, but depending on the country the user select, on the variable entry for COMP_CODE, just the values of the companies for the country selected by the user must appear.
For this purpose, I am using an exit value to calcule the values for companies once the user has selected the country; but what I want to do is restrict the 0COMP_CODE matchcode with the values calculated on the exit.
How can I do it? What is the FM I must use on the exit?
Thanks in advance

Hi Ste,
check this:
Displaying filter values in WEB reporting
SAP Note Number: [587751|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Attributes are missing in F4 Help for characteristic values
SAP Note Number: [562497|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Regards
Andreas

Need to place a variable value at the end of report heading in BI 7

Dear All,
We have to place a variable value at the end of the report heading and the value should get refreshed whenever we change the variable by using "Change Variable Value". I have created a macro and the value will get triggered unless and until we click on any where on a sheet. But, we want to automate this one by using a macro.
Ex: Quarterly TA Host Country Details As Of "Variable Date" Variable is created on TA Date characteristic. User can enter date on Pop up window box at the time of changing a variable TA Date. We need changed date at the end of the Report heading Qua----
Please suggest me on how to place variable value at the end of report heading by using a macro.

No need to use Macro. You can use text variable.
Goto the Query Description and click on the Text variable icon.
Create a text variable of processing type as REPLACEMENT PATH and replace it with the characteristic for which you have a ready for input variable that will be eneter by the user.
This will populate the text variable with the value entered by teh user.
Use this text variabkle along with the Query Description. So your description will look something like REPORT_TITLE&TXT_VAR&
Hope this helps.

Xpath Debatching in Orchestration -The part 'part' of message 'Message_In_Copy' contained a null value at the end of the construct block

Hi ,
Facing strange issue in Xpath debatching in Orchestration.
Getting following error in construct shape:
The part 'part' of message 'Message_In_Copy' contained a null value at the end of the construct block
Code inside the construct block:
sXpath = System.String.Format("/*[local-name()='Customers' and namespace-uri()='http://Debatch.Customer']/*[local-name()='Customer' and namespace-uri()='http://Debatch.Customer' and position()={0}]", nLoopCount);
System.Diagnostics.Debug.WriteLine(sXpath);
Message_In_Copy= xpath(Message_In, sXpath);
Schema used:
<?xml version="1.0" encoding="utf-16"?>
<xs:schema xmlns="http://Debatch.Customer" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://Debatch.Customer" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Customers">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="Customer">
<xs:complexType>
<xs:sequence>
<xs:element name="name" type="xs:string" />
<xs:element name="id" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Can anyone help me out ? to identify the root cause for above issue.
Thanks,
Kind Regards,
girsh
girishkumar.a

I agree with Shankycheil here, querying XPath will return XMLNode and thus can't be assigned to XMLNode.
But for debatching in Orchestration using Xpath is not a very good idea.
Because using XPATH loads the complete message in memory(XML Structure) and then performs processing.
This approach is always prone to throwing Out of Memory exception and low in performance also.
Therefore I would suggest you to perform debatching by calling XML Disassembler(XMLReceive) pipeline.
As pipeline works with Stream it will have better performance and you will also get complete control over the messages.
Refer the below samples for debatching using XML Receive pipeline within Orchestration.
Comparrison between XPATH and ReceivePipeline for Debatching:-
De-batching within an orchestration using XPath or calling a pipeline
Debatching within Orchestration using Pipeline-
http://tech-findings.blogspot.in/2013/07/debatchingsplitting-xml-message-in.html
https://jeremyronk.wordpress.com/2011/10/03/how-to-debatch-into-an-orchestration-with-a-pipeline/
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

With the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

How to add an attachment to an e-mail. With out it showing up and the end of a e-mail.

How to add an attachment to a e-mail. With out it showing up at the end of the e-mail.

https://discussions.apple.com/message/17397882#17397882
How can I prevent mail attachments embedding when sending mail
Note there are 14 pages of replies

Timeline usage : To display value at the end of timeline values

Hi Team,
In my current project, I want to implement functionality given below. All records are present in one single table.
Table has columns as (City,Date,Positive,Negative,CountOfItems)
I have created data model as given below.
I need to design Power View Report for which Date will act as "Timeline", so when I select DAte as "2010-10-01" to "2010-11-01" then It should show me report having data on "2010-11-01 because it is latest data I am having.
Final report should look like as below.
But as I have used "Sum" function, it shows me wrong result.
My actual meaning is that, on every date of selected window in timeline, value at the last day of selected window should be displayed at report.
Can anyone help me to do db design and report formulation.

It looks like this was answered in your other thread...
Display value at the end of timeline range selection: http://social.msdn.microsoft.com/Forums/en-US/sqlkjpowerpivotforexcel/thread/20ce91d4-9cc1-4680-be71-6172c64e4da7/#20ce91d4-9cc1-4680-be71-6172c64e4da7
In the future, please try to avoid creating multiple threads for the same problem :)
Regards,
Michael
Please remember to mark a post that answers your question as an answer...If a post doesn't answer your question but you've found it helpful, please remember to vote it as helpful :)

How do I put shortcuts to web sites in a (?) tool bar/browser bar...don't know what it is called. With IE, I can just drag the tab for the site to the area I want.

How do I put shortcuts to web sites in a (?) tool bar/browser bar...don't know what it is called. With IE, I can just drag the tab for the site to the area I want

Near the right-end of the address bar is a white star which can be difficult to see, but look closely. When you wish to bookmark a shortcut to the toolbar, double click the star. A window will open with the name of the webpage. Under that is the folder box which will probably read 'Unsorted Bookmarks'. Click the drop down arrow and change it to 'Bookmarks Toolbar' then click done.
I have several folders on my toolbar such as Music, Mail, etc. in which I add multiple websites. If you wish to add a folder, click the second drop down arrow next to 'Bookmark Toolbar' and click 'New Folder' and give it a name.
To add a bookmark to a folder, again double click the star, make sure you are in Bookmark Toolbar and click one of the two drop down arrows to find the name of the folder.
For other bookmarks use Bookmark Menu. Whatever is added here can be accessed by Bookmarks on the Menu Bar. If your Menu Bar with Bookmark, File, View, etc. is not visible, click the Alt key and they will become visible. To keep the Menu Bar, click View, Toolbars and check Menu Bar.

I have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
is there a software or something along those lines that would indicate what peice of hardware is faulty?
i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick

Hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Delete the transferred values using the transaction for changing old assets

how to Delete the transferred values using the transaction for changing old assets.
i want delete the my asset.
Thank you
Anil

Dear Anil,
AS06 Delete Asset Record/Mark for Delet.
AS26 Mark group asset for deletion
Hope this will help.
Regards,
Naveen.

HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7?? Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen. Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

SessionID with different 13 digit value at the end for evry request

Similar Messages

Maybe you are looking for