Strange Error when previewing or publishing

Hi Muse Family
I am getting a very strange error when I publish to BC or when I go to preview in browser:
"Adobe Muse has encountered an error.. blah blah"
and then a very confusing:
"There should not be such ID exists in the mapping"
It forces Muse to close.
I can't think of any significant step I took to cause this problem from when it was working.

To enable the frequent release of new features within Muse, the team is always simultaneously working on many different improvements only some of which are completed and exposed in any given release. In the 2014.1 update some of the underlying code related to SVG support was unintentionally enabled. When copying and pasting from some versions of Adobe Illustrator (and other sources) the result may be an SVG vector graphic in Muse, rather than an image. While the SVG may appear to work in Design view, it can cause failures when exporting or publishing from Muse. This functionality will be disabled in an imminent dot release, 2014.1.1. We advise users to remove SVG content from their sites. Until 2014.1.1 is available, the graphics will need to be brought into Muse as .png, .jpg, .gif or .psd images using File > Place or Import, rather than Copy/Paste.
Sorry for the inconvenience. SVG support will be fully implemented, tested and included in a future major update of Muse.
Additional discussion in this thread <Re: I can paste vectors in muse now, it shows up in preview, and even in a browser preview, but not when I upload.>.

Similar Messages

Strange Error when trying to publish code from author instance to publish instance

When I attempt to publish code I get error "Cowardly Refusing to tree-activate "/apps". There are no addtional messages and when I try to package up the same objects and import them, I recieve an minimal message Error Uploading XXX.Zip.
Has anyone run into these messages before?

The tree activation error is built in validation, it will not tree activate a top level directory. You will get the same message if you did /content for example. But if you do /apps/foo it will work.
I don't about uploading error - have you looked at your server logs? It could be a permissions issue or a disk space issue - especially if you package is large.

Error in Preview - XML Publisher Admin page

Hello-
I am having this issue where all templates are getting the same error when previewing under (R) XML Publisher Administrator-> (T) Templates-> (B) Preview in EBS 11.5.10.2. I am getting the error below after clicking on the preview button (prompted the Open/Save button) then open PDF.
Anybody who has experienced the same problem? The error is happening on all the templates but on preview only. I have cleared the temp directory but still the same error.
ORACLE XML PUBLISHER
VERSION: Oracle XML Publisher 5.6.3
DATE CREATED: Wed Nov 11 11:52:26 EST 2009
Page 1
EXCEPTION: /usr/tmp/test2/xdorUSpHVpzd0111109_1152266761.fo (No such file or directory)
Exception Detail
java.io.FileNotFoundException: /usr/tmp/test2/xdorUSpHVpzd0111109_1152266761.fo (No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:135)
at java.io.FileOutputStream.<init>(FileOutputStream.java:118)
at oracle.apps.xdo.common.tmp.TmpFile.createTmpFileJDK118(TmpFile.java:146)
at oracle.apps.xdo.common.tmp.TmpFile.createTmpFile(TmpFile.java:113)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:987)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.xdo.oa.template.server.TemplatesAMImpl.processTemplate(TemplatesAMImpl.java:2130)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:190)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:153)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:749)
at oracle.apps.xdo.oa.template.webui.TemplateGeneralCO.previewTemplate(TemplateGeneralCO.java:741)
at oracle.apps.xdo.oa.template.webui.TemplateGeneralCO.processRequest(TemplateGeneralCO.java:158)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:581)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1133)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2318)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1717)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
at _oa__html._OA._jspService(_OA.java:86)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:175)
at _oa__html._OA._jspService(_OA.java:96)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:479)Thanks in advance.
Munish

Hi Rownald,
I am stuck with the same error:
Error one \ts01\u00\app\ts01\common\admin\out\xdoDtSCIn59Vq010510_0131541560.fo (The system cannot find the path specified)
Our Application and database servers are the same and the path \ts01\u00\app\ts01\common\admin\out\ already exists and has all the permissions.
I almost wasted 2 days for just this issue. Any help would be really great!!
Thanks in advance.
Kumar

Strange error when Bootcamp attempts to create partition for Windows

I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
*The disk cannot be partitioned because some files cannot be moved.*
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

Hi,
this gets asked at least a thousand times by now.
Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
Regards
Stefan

Getting an error when installing BI Publisher Desktop

Hi,
Is anyone getting an error when installing BI Publisher Desktop? I'm getting an error when I'm installing BI Publisher Desktop and the error message is compile error in hidden module: Module_ini.
Any feedback would be appreciated.

Ravi,
Yes, I have java run time on my machine and I'm in a Windows XP SP2 environment. Also note that I'm installing BI Publisher Desktop for 10.1.3.2 and I have all the prerequisites installed prior to the Publisher Desktop installation.
The exact error message for the BI Publisher Desktop is:
Compile error in hidden module: Module_ini (Microsoft Visual Basic)

I have a strange error when I close a combobox:

I have a strange error when I close a combobox:
<mx:ComboBox
id="currencyComboBox"
prompt="Select Currency" dropdownStyleName="dropdown"
labelField="currencyName"
>
<mx:close>
<![CDATA[
selectedItem = ComboBox(event.target).selectedItem;
calculateCustomerData();
]]>
</mx:close>
<mx:change>
<![CDATA[
selectedItem = ComboBox(event.target).selectedItem;
calculateCustomerData();
]]>
</mx:change>
</mx:ComboBox>
RangeError: Index '7' specified is out of bounds.
at
mx.collections::ListCollectionView/getItemAt()[E:\dev\3.0.x\frameworks\projects\framework \src\mx\collections\ListCollectionView.as:422]
This only occurs when its dataprovider is from a result event
rather than its dataprovider from a predifined arraycollection.
private function handleGetBanks(event:ResultEvent):void{
bankResult = new ArrayCollection((event.result as
ArrayCollection).source);
currencyComboBox.dataProvider = event.result as
ArrayCollection;
rather than using the following as a dataprovider:
<mx:ArrayCollection id="currencies">
<mx:Object label="AED" />
<mx:Object label="AUD" />
<mx:Object label="CAD" />
<mx:Object label="EUR" />
<mx:Object label="NZD" />
<mx:Object label="USD" />
<mx:Object label="ZAR" />
</mx:ArrayCollection>
Can anyone see what the problem might be?

Sorry my mistake, the change event was being called before
the close event. Then I could debug and find the problem

"Unknown Error" when attempting to publish through Muse

I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
Any help in the right direction is appreciated!

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

Strange error when trying to validate a business rule

I get this strange error when I try to validate a business rule:
Detail:Cannot calculate. Essbase Error(1200369): Error optimizing formula for [69972] (line 38): can not cross members from the same dimension
The rule is:
FIX (@RELATIVE("SG&A", 0))
"69972" = (("60001" -> "C1130" -> "All Projects" -> "All Employees") + ("69971" -> "C1130" -> "All Projects" -> "All Employees")) * "SG&A % of C1130" -> "No Cost Center" -> "PNULL" -> "No Employee" * (("Headcount" -> "All Projects" -> "All Employees") - ("C1130"->"Headcount" -> "All Projects" -> "All Employees")) / (("Headcount" -> "SG&A" -> "All Projects" -> "All Employees") - ( "C1130"->"Headcount" -> "SG&A" -> "All Projects" -> "All Employees")) ;
ENDFIX

Error msg states that you have used crossdim operator with the member of same dim. Cross check again.
EX:
"C1130"->"Headcount" -> "SG&A" -> "All Projects" -> "All Employees"
Are all of these members belong to different dimesions?

Gives me errors when preview report in world.

Hi Members,
below is the errors when i try to run and preview report in world.
any help and suggestion is greatly appriciated.
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: C:\Documents and Settings\nshah\Desktop\GASB_FINANCIAL.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\nshah\Desktop\GASB_Financial_statement.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:708)
     at RTF2PDF.runXDO(RTF2PDF.java:517)
     at RTF2PDF.main(RTF2PDF.java:305)
Caused by: oracle.xdo.parser.v2.XMLParseException: Attribute 'select' not found in 'xsl:value-of'.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
Thanks,

Did you try the "Validate" function from the Word Template Builder?
It helps find many of these issues. The only thing that makes it more difficult to use
is that it tells you onlythe line number in the RTF file.
So if you don't know which field causes the issue, you need to open the RTF file
in a text editor like notepad, got to the line number and look for some
regular text close to it to the error to find where the issue is in the word document.
Hope that helps,
Klaus

Error while previewing BI Publisher Report Output form Desktop

Hi,
i am getting below error while previewing Report Output form Desktop:
javaw -Xmx256M -jar "C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib\RTF2PDFv2.jar" "C:\Users\mahlawat\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tb_param.xml"
File not found.
Please suggest
Regards,
Meetu

Hi ,
are u able to login into the bipublisher...check once..
http://10.81.200.102:7777/xmlpserver
generaly while connection to the desktop we will give the url at the bottom.
the vpn is connected or not..
Thanks,
Ananth

A strange error when starting up Oracle database

When I was starting up an Oracle DB instance on HP-UX B.11.23 U ia64 host, a strange error message was encountered as follows:
======================================================
SQL*Plus: Release 9.2.0.8.0 - Production on Sat Sep 1 21:50:05 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 320290568 bytes
Fixed Size 724744 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Database mounted.
ORA-01122: database file 11 failed verification check
ORA-01110: data file 11: '/u01/CADDB/data/cwmlite01.dbf'
ORA-01251: Unknown File Header Version read for file number 11
SQL> Disconnected from Oracle9i Release 9.2.0.8.0 - 64bit Production
JServer Release 9.2.0.8.0 - Production
Database "GPRS" warm started.
======================================================
To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB". Who can tell me why that? What is the purpose of the tablespace CWMLITE in a DB?

Hm, what does this have to do with "Community Feedback and Suggestions"?
Please move your post to a more apropriate forum such as General Database Discussions

Network Error when trying to Publish to iWeb

My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
If anyone can help me that would be great!
Thanks...CCM in CR

Here's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
-Allan

CL_RSR_REQUEST,OBJECTS_OBJREF_NOT_ASSIGNED error when preview iView in EP 5

When i tried to preview the iView in EP 5, i came to a page where it says "Error when processing your request".
Note
The following error text was processed in the system NYP : Access via 'NULL' object reference not possible.
The error occurred on the application server server5_NYP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VARIABLES_START of program CL_RSR_REQUEST================CP
Method: VARIABLE_START of program CL_RSR_WWW_VARIABLE_SCREEN====CP
Method: SET of program CL_RSR_WWW_VARIABLE_SCREEN====CP
Method: PROCESS_VARIABLES of program CL_RSR_WWW_PAGE===============CP
Method: PROCESS_CMD_LOCAL of program CL_RSR_WWW_PAGE===============CP
Method: PROCESS_CMD of program CL_RSR_WWW_PAGE===============CP
Function: RRW3_WEBRFC of program SAPLRRW3
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_RSR_WWW_HTTP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Error code: ICF-IE-http -c: 001 -u: USER00 -l: E -s: NYP -i: server5_NYP_00 -w: 0 -d: 20080128 -t: 102805 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
When i used TCODE ST22 to check the ABAP error, it says that "You attempted to use a 'NULL' object reference (points to 'nothing') access a component (variable: " "). An object reference must point to an object (an instance of a class) before it can be used to access components. Either the reference was never set or it was set to 'NULL' using the CLEAR statement.". This error occurred in VARIABLE_START method.
When i searched the forums and also SAP notes, it says that I need to download and execute "SAPBINews BI 7.0 Support Package 15". Is this feasible?

Hi lin,
You solved your problem, if ye... Can you talked that make to solve your problem
Att,
Alexandre

Portal Runtime Error when excecuting a published iview

Hi,
I have an issue concerning the iviews published by the BEx 7.0 to the Portal. I get a Portal Runtime Error when I execute them on the portal.
The log on J2EE server is:
Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>&\#39;; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
My support package levels are:
SAP_ABA     700     0013     SAPKA70013
SAP_BASIS     700     0013     SAPKB70013
PI_BASIS     2006_1_700     0002     SAPKIPYM02
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0015     SAPKW70015
BI_CONT     703     0008     SAPKIBIIP8
ST-A/PI     01J_BCO700     0000          -
Any ideas ?
Thanks in advance
Thibaut

Hi Erik,
When we confure system at portal under system admin tab, we wil have a dropdown to display
the system object properties i.e. system alias,test conections ,permissions and delta link tracer.
Here we will find option to add system alias.
And Cache admin will be present at Aministrator level.Ask ur basis to do this.
I m talking in perspective of EP7.0 SP 11.
Hope this helps.
Regards,
Shaila

Meet with a strange error when starting up an Oracle DB instance

When I was starting up an Oracle DB instance on HP-UX B.11.23 U ia64 host, a strange error message was encountered as follows:
======================================================
SQL*Plus: Release 9.2.0.8.0 - Production on Sat Sep 1 21:50:05 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 320290568 bytes
Fixed Size 724744 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Database mounted.
ORA-01122: database file 11 failed verification check
ORA-01110: data file 11: '/u01/CADDB/data/cwmlite01.dbf'
ORA-01251: Unknown File Header Version read for file number 11
SQL> Disconnected from Oracle9i Release 9.2.0.8.0 - 64bit Production
JServer Release 9.2.0.8.0 - Production
Database "GPRS" warm started.
======================================================
To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB". Who can tell me why that? What is the purpose of the tablespace CWMLITE in a DB?

What I know is that CWMLITE is to do with OLAP. This tablespace is used to store OLAPSYS schema.
<<To my surprise, the file /u01/CADDB/data/cwmlite01.dbf is a data file of the tablespace CWMLITE from another Oracle DB instance named "CADDB">>
If the file doesn't belong to your database then it could be that you are using a wrong controlfile.

Strange Error when previewing or publishing

Similar Messages

Maybe you are looking for