Tables used when creating a sales return with and without refrence

Hiya gurus,
                I am developing a report to display sales order and sales return created from one partiular storage location and for one particular division. I need to get the tables used when creating the sales order and the sales return's.
               For sale order I would be using VBAK and VBAP but for sale return with refrence and without refrence i am not sure which tables to look for.
             kindly please let me know which tables i go for to get the sale return data.
            Thanking you very much, your efforts are deply appreciated
Cheers,
ZIa

Hi,
U can see VBFA tablefor CompleteDocu flow with differentconditions.
Regards,

Similar Messages

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Warning message, if Quantity=0, when creating a sales order with VA01orVA02

Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PM

thanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq

How to use single ant build to package with and without native extensions

Hi,
I am using iOS native extensions for Adobe air. For this I am listing the extensionid in the application descriptor file. Since the package with native extensions are meant to run only on device, I want my build script to work without native extensions too to be able to run on simulator. Is this manadatory that I need two separate application descriptors/basically two build scripts to compile and package them? Please suggest and let me know if more explanation is needed.
Thanks,
Swathi.

why are you wanting to use single frames?
They allow having the initial frame address stay in the
address bar, and not
show the linked page's address. The problems they cause
usually override any
value.
Or- if we aren't using the same words the same way, please
give an example
site of what you want to do.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Error while creating the sales order with billing reference

hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEV

Dear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

Create a Sales Order with Reference to Contract using IDoc / LSMW ( AFS )

Hi Gurus,
I need to crate a Sales Order with reference to a Contract. I need to upload Sales Orders with reference to contract via LSMW.
So far, I've been able to create the Sales Order with ref to contract. But, the Sales Order Quantity is not getting deducted from the Original Qty in Referred Contract ( When try to create another Sales Order referring to the same Contract.) When a Sales Order is created manually, this is working fine.
Please tell me if I've missed some parameter which stopping it create the link to exact schedule line ( Sizes level )
The Details of the IDoc which is been created via LSMW are as follows;
Message Type: ORDERS
Basic Type     : /AFS/ORDERS05
Process Code : ORDE / DELO
( Tried with both process codes. But the Identification is the same for both: IDOC_INPUT_ORDERS )
*_In Header;_
Segment : E1EDK02 - IDoc: Document header reference data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped for field BELNR
*_In Item;_
Segment : E1EDP02 - IDoc: Document Item Reference Data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped to field BELNR
Line Item of the Contract is mapped to field ZEILE
I also tried passing the Schedule line of Contract in Segment : E1J3P01 AFS IDoc: Doc.item general data
to following fields;
J_3AETENV
J_3AVGETE
/AFS/UETENR
Still its not getting updated in the VBEP also..
Please help me with regard to this. Points will be awarded for your valuable contribution.
Thanks.

Hi,
This issue is been resolved.
One of my friend helped me with resolving this issue..
Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
u2022     SPRO --> SD -->Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types --> Field : Outline agreement message; from blank to u201CBu201D.
u2022     SPRO -->SD -->Sales --> Sales Documents --> Sales Document Header --> Maintain Sales Document Types for AFS --> Field : Outline agreement message; from blank to u201CAu201D

Create a Sales order with reference to another sales order using BAPI

Dear All,
Can any one tell me what are all the parameters required to create a Sales order with reference to another sales order using BAPI_SALESORDER_CREATEFROMDAT2....
Thanks in advance

Hi Madhan
Thanks a lot for your reply.
However, I would like to know which parameters need to passed in this BAPI in case of SO creation with reference. I beleive there are only a few parameters that need to passed in ORDER_HEADER_IN, ORDER_ITEMS_IN, etc.
Need to know exactly which are these parameters.
Regards
Mihir Shah.

Problem in when creating the sales order

Hi to All,
I am using the function module 'BAPI_SALESORDER_CREATEFROMDAT2' to create a sales order with quotation reference. When
I executing the program the return table shows following issues
1.Document 20000292 doesn't have document category but
2.Sales document was not changed
But , when i used to create the sales order manually( TC : VA01) with reference of '0020000292' it gives the sales order number.
so,kindly suggest me.
Thank you

Hi,
While using BAPI, you need to give some mandatory fields . So I think document catogary is missing in header structure.
Thanks,
Srikanth.A

Doubt in creating a sales order with reference to contract

Hi all,
when I create the sales order with reference to contract, in the table VBFA, the field PLMIN is set to zero some times and set to '+' some times. May I know whats the functionality behind this. Any pointers on this will be helpful.
Regards,
A.Rathinaprakash

Hello A.Rathinaprakash,
This is an Indicator which indicates the quantity or value in the target document(means Sales order) has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document(means contract).
Example from the Help file..
In sales documents, for example, you can expect the following results:
Quotation   -> Sales order: positive effect
Contract    -> Return: negative effect
Sales order -> Sales order: no effect
In billing documents, for example, you can expect the following results:
Delivery    -> Invoice: positive effect
Delivery    -> Cancellation: negative effect
Delivery    -> Pro-forma invoice: no effect
Hope it helps..
Regards,
HP

Creating a sales order with reference/BAPI_SALESDOCUMENT_COPY

Hi,
I have to create a sales order with a reference to another order and have to change some fields in the new document.
According to SAP note 370988 the function BAPI_SALESDOCUMENT_COPY should allow to create a sales order with reference to another order.
Unfortunately it doesn't work for me.
The BAPI doesn't return an error and creates a new order but that one is incomplete.
The reason seems to be that VKORG, VTWEG and SPART aren't provided and because of that the new order can't be created completely.
I can find no way to provide these fields to the BAPI.
Has anyone used the BAPI successfully or has found another way to achieve the desired result?
I already checked
batch input: problematic because I have to change partners which are displayed in an table control which can't be controlled reliably from batch input
the second way described in the SAP note: high effort and high risk, as each data field has to be copied explicitly from one represantation to another.
Any help is appreciated.
Kai

That approach would effectively duplicate the implementation of BAPI_SALESDOCUMENT_COPY, wouldn't it?
As there is a lot more data involved than just VBAK/VBAP (e.g texts, partners, conditions, schedules) this is not only a lot more effort it's also harder to get it right, especially since there might also be copy control customization which has to be take into account.
Nevertheless I tried it and it isn't working in my case.
I' have to create a debit memo request (BUS2096) out of a sales order (BUS2032), and BAPIs SALES_ORDER_CREATE* only handle BUS2032.

Automatic creation of intercompany PO when creating a Sales Order

Hi Experts
Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
Desired results:
Sales order from store/plant YY belonging to company code Y to end customer A
Intercompany billing from plant XX belonging to company code X to store/plant YY
End customer billing from store/plant YY to end customer A
Thank you in advance for your help.

Hello Tsmash
I think you can acheive this with Regular Sales order + Inter Company STO combination.
Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
Then do the config for STO in MM using this menu path:
SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
Here, in the activity 'Define Shipping Data for Plants', enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain) from co code Y.
In the material master MRP 2 for Plant YY, maintain procurement type as F and Special Procurement as Z1.
Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
That's how it should work. Try it and revert with any issues.

Do not change the payment term created a Sales Order with reference

Hi Gurus,
Do not change the payment term created a Sales Order with reference to a contract where the payer of the change in Sales Order.

Hello ,
As per my understanding , you do not want the payment terms to be changed even if the payer partner function is changed ,
as standard sap redetermines the payment terms with change in partner function, you may use the exit
USEREXIT_MOVE_FIELD_TO_VBAK- header level
USEREXIT_MOVE_FIELD_TO_VBAP- Item level
in this you could write a small code which will not change the payment terms when payer is redetermined
hope this helps
Thanks
akasha

Tables used when creating a sales return with and without refrence

Similar Messages

Maybe you are looking for