The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Similar Messages

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Error :-The requested resource does not exist while opening the adobe form

    hello Experts,
    We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
    We have developed adobe  form using HCM forms and processes and done the required configuration in SPRO
    When we are trying to open the form from ESS we are getting below error
    404 not found
    The requested resource does not exist.
    Please look into this issue and let us know any thing we are missing
    Sincerely
    Paresh

    is ADS working correctly?
    1.  Use transaction SA38 to execute the program FP_TEST_00.
           Detailed information about this test program and about how you
           should then proceed is given in the Adobe Document Services
           Configuration Guide in the Help Portal under:
           http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
           94facfdc09a359b1/frameset.htm -> Adobe Document Services
           Configuration Guide -> Configuring the Web Service -> Securing
           Access to the Web Service ->Configuration Check -> Configuration
           Check for PDF-Based Forms in ABAP
           -  If the FP_TEST_00 form is displayed in the print preview, the
              ADS configuration is correct.
              -> If you use scenarios with an interactive PDF, proceed with
              point 5. Otherwise, proceed with the test under point 6.
           -  If the system displays an error message instead of a form, the
              configuration of ADS is incorrect.
              -> Carry out the additional tests from point 2 onwards.
    2.  Use transaction SA38 to execute the program FP_PDF_TEST_00.
        This enables you to check the RFC connection to ADS  (see the
        reference to the documentation given above).
           -  If the system displays the version number of ADS, the
              configuration of the RFC connection is correct.
    read the note 944221
    Please paste the whole error? Is any dump in ST22

  • 2012 New Cluster Adding A Storage Pool fails with Error Code 0x8007139F

    Trying to setup a brand new cluster (first node) on Server 2012. Hardware passes cluster validation tests and consists of a dell 2950 with an MD1000 JBOD enclosure configured with a bunch of 7.2K RPM SAS and 15k SAS Drives. There is no RAID card or any other
    storage fabric, just a SAS adapter and an external enclosure.
    I can create a regular storage pool just fine and access it with no issues on the same box when I don't add it to the cluster. However when I try to add it to the cluster I keep getting these errors on adding a disk:
    Error Code: 0x8007139F if I try to add a disk (The group or resource is not in the correct state to perform the requested operation)
    When adding the Pool I get this error:
    Error Code 0x80070016 The Device Does not recognize the command
    Full Error on adding the pool
    Cluster resource 'Cluster Pool 1' of type 'Storage Pool' in clustered role 'b645f6ed-38e4-11e2-93f4-001517b8960b' failed. The error code was '0x16' ('The device does not recognize the command.').
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    if I try to just add the raw disks to the storage -- without using a pool or anything - almost every one of them but one fails with incorrect function except for one (a 7.2K RPM SAS drive). I cannot see any difference between it and the other disks. Any
    ideas? The error codes aren't anything helpful. I would imagine there's something in the drive configuration or hardware I am missing here I just don't know what considering the validation is passing and I am meeting the listed prerequisites.
    If I can provide any more details that would assist please let me know. Kind of at a loss here.

    Hi,
    You mentioned you use Dell MD 1000 as storage, Dell MD 1000 is Direct Attached Storage (DAS)
    Windows Server cluster do support DAS storage, Failover clusters include improvements to the way the cluster communicates with storage, improving the performance of a storage area network (SAN) or direct attached storage (DAS).
    But the Raid controller PERC 5/6 in MD 1000 may not support cluster technology. I did find its official article, but I found its next generation MD 1200 use Raid controller PERC H 800 is still not support cluster technology.
    You may contact Dell to check that.
    For more information please refer to following MS articles:
    Technical Guidebook for PowerVault MD1200 and MD 1220
    http://www.dell.com/downloads/global/products/pvaul/en/storage-powervault-md12x0-technical-guidebook.pdf
    Dell™ PERC 6/i, PERC 6/E and CERC 6/I User’s Guide
    http://support.dell.com/support/edocs/storage/RAID/PERC6/en/PDF/en_ug.pdf
    Hope this helps!
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Lawrence
    TechNet Community Support

  • How do I change my apple id from an old one that does not exist anymore to the new one I use....Please help me I can't update any downloads for my apps.

    How do I change my apple ID from an old one that doesnot exist anymore to a new old? When I purchased my macbook I had a mac.com email address but now have a me.com one. My computer is linked to the mac one. I cant update my apps....some one please help.

    Well when I first purchased I had an mac address, which I have not used for a long time I started a me address about 18months ago. and up untill I updated my iPhone I have been able to use my mac.com now I cant and dont know what to do because it tells me to verify my apple ID. I put in the password etc and doesnot take me anywhere as I cant access the emails.

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • Problem creating new sites. The formula refers to a column that does not exist

    Good morning,
    I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
    with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist.  Check the formula for spelling mistakes or change the non-existing column to an existing column]. 
    I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
    Anybody knows how to find my problematic column?
    The error is:
    Feature Activation: Threw an exception, attempting to roll back.  Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7').  Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
    columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
    que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista.     at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)     at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
    bstrUrl, String bstrListName, String bstrXML)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
    SPWeb web, Boolean fForce)     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
    fForce)     at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
    Thanks in advance

    Hi Enrique,
    According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
    site template.
    Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
    please go through all the Calculated column in that content type to see if the formulas all work well.
    Feel free to reply if there any progress.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

    I have a SSIS project that I am newly running on the SQL server (2005) .  It was previously run on my PC.  I am importing data from a DB2 server to the SQL server.
    I am in the SA group on the server
    My connection to DB2 works
    When open the package and run it in preview mode, I can retrieve the data.
    When I execute the package I get the below errors:
    [MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
    What I have already done that has not worked:
    The original Protection level was set to EncryptSensitiveWithPassword. 
    I have reset the Package Password.
    I have set the protection level to DontSaveSensitive
    I saved the package on the server and set a Package Password.
    I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
    Error continues

    Yes.  The Drivers are installed and I have a successfull connection.  I am trouble shooting the issue on the server in BIDS.  I can connect to the DB2 server via the Connectionmanager.  I can also preview the data in the OLE
    DB source connection.  Therefore I know that I have a proper connection
    If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
    will enable you to change connection info at runtime.
    If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • The AcquireConnection method call failed with error code 0xC0202009.

    I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
    - Pre-execute (Error)
    Messages
    Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft JET Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (SQL Server Import and Export Wizard)
    Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
     (SQL Server Import and Export Wizard)
    The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
    Anyone else have this problem or know the solution?
    Jeff

    I am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
    I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
    It fails with following error code.
    [OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
    When i change the source SQL query to Table or View then it works fine.
    Thanks for any suggestion.
    Regards
    Rakesh
    Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
    This is one of the very common errors that comes up in SSIS (SQL Server Integration service) 
    I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
    In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
    To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).  
    In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC.

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • What is this? Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE._

    hi    This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
    provisioning while i am not running anything.
    please help!!!
    10/03/2011 14:39:23.46 w3wp.exe (0x306C)                      
    0x2FC4
    SharePoint Foundation         Topology                      
    e5mc Medium  
    WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
    MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
    91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Topology                      
    e5mb Medium  
    WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
    MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    nasq Medium  
    Entering monitored scope (ExecuteWcfServerOperation)
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.

    Hi there,
    A quick search showed the result on fourm thread:
    It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
    http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
    To read in support article.
    http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

  • EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

    I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
    I have observed a strange problem on non-English windows 2008 OS. 
    If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
    While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
    I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
    OS language (Chinese in this case). That's not a desirable output for me.
    Following is the way I'm calling EvtFormatMessage 
    EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
                                   1 /* EvtFormatMessageEvent */, 
                                   m_pTextBufferSize/sizeof(WCHAR),
                                   m_pTextBuffer, &dwBuffUsed);
    A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
    My question is  why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
    Any help would be appreciated.
    TIA,
    Regards,
    Yogesh
     

    Was on vacation and hence the delay in replying.
    As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
    i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.  If I change this macro
    to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
    This is not an option for me as I want event details in English language only.
    Regards,
    Yogesh
    Regards, Yogesh

Maybe you are looking for

  • Apple Mail consuming lots of CPU

    Since I've upgraded my MacBook Pro from Snow Leopard (10.6.8) to Mountain Lion Apple Mail has been behaving strangely – Activity Monitor shows Mail consuming about 100% CPU for hours at a time. Mail is often very sluggish at displaying messages. I've

  • What Function Module is used in a Virtual Cube

    Hi, where can is see what Function Module is used for a Virtual Provider(Cube)?

  • How To Store Files On a Server?

    I am using the Tomcat 5.0.27 web container. I have always store things into the database. Now, I am told to store files (uploaded files) on the server. And, when clients want the files later on, clients can download them. Because I have not yet had t

  • Menus Imported from Photoshop (problem)

    So I design a menu in Ps, then bring it into DVDsp, and i have my little "play all" - and "scene selection" in the corner of the jpeg, how to i get that to become highlighted, when in a dvd player, so you are able to select them with a remote, say a

  • Setup and Security of XP Mode in Windows 7 SP1

    I purchased my new ThinkPad W530 with Windows 7 SP1 and XP Mode factory installed to allow use of some "legacy" programs.  Presumably the first thing I have to do (if I can figure out how to get XP activated) is to download all the updates before ext