The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Similar Messages

Company code set up for material management

Experts,
When I try to create sales order error is coming Comany code IN02 not set up for material management. In OMSY I have changed current and previous accordingly.
Resolve this.
Thanks & regards,
Supriyo

Mr. Naren,
This is not a reply from an expert. I am practicing in IDES on my own in my house. I try to do all things in configuration on my own with the available study material.
Whenever I get any error first I try myself whether it takes 2/3 days to get it resolved. Then I go to Google for further search help. Finally I go to SCN.
Thanks & regards,
Supriyo

HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address in my original Apple ID! HELP!

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Company code is not set up for electronic tax return

hi dear
what is the configuration of e-return salea/purchase .
The system cannot execute the taxes on sales/purchases settlement within electronic communication with authorities.
when i excute F.12 then message coming Company code is not set up for electronic tax return
please guide me.
regards
purushottam
Regards

Hi,
if you start report via SE38. program name RFUMSV00 you can read the program documentation. In here it states what is needed:
...In addition, the report provides data for the electronic advance return
for tax on sales/purchases. The administration report for electronic tax
returns (FOT_B2A_ADMIN) then directly sends the return to your relevant
tax authority.
To use the electronic advance return for tax on sales/purchases, make
the necessary settings in the screen area Posting Parameters under
Electronic Advance Tax Return.
For more information, see the SAP Library under Financials -> Financial
Accounting (FI) -> Financial Accounting General Topics -> Taxes
(FI-AP/AR) -> Taxes on Sales/Purchases, Sales Taxes, and Additional
Taxes -> Electronic Advance Return for Tax on Sales/Purchases.
Hope this gives you a beginning.
Hein

I get this error when trying to prepare a project for sharing to itunes or iDVD. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)

The project could not be prepared for publishing because an error occurred. (-50)

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

The project could not be prepared for publishing because an error occurred. (-50)

I made an 18 minute video, tried to export it using iMovie '11 to iTunes/Media Browser/iDVD everything. Everytime I get this message 'Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)'. I tried the time machine snapshot thing, I set all teh acces to Read/Write and restarted my computer. I have over 70GB on my computer, which is more than enough for a 540 MB film. What does the -50 mean, and how do I solve it. Thank-you.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

Activity Type ENGINE not set up for cost center

Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.

Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick

The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF

We are running SUM 1.0 SP10 on IBM i with V7R1 to put EHP6 and SP's on an ERP 6.0 system. Phase PREP_PRE_CHECK/SCANDIR_EPS0 repeatedly ends with multiple errors that SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF file. We tried increasing the sidADM and R3GROUP authority to the file, but it changes them back and ends with a different number of errors each time, see example:
SAPup> Starting subprocess with PID 4295601 in phase 'SCANDIR_EPS0' at 20140319101619
    ENV: DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/bin:.
    ENV: LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/server:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/jli:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64/jli:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LANG=en_US
    ENV: PASE_LC__FASTMSG=true
    ENV: PASE_LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LOCPATH=/usr/lib/nls/loc
    ENV: PASE_NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/lib/nls/msg/en_US/%N:/usr/lib/nls/msg/en_US/%N.cat
    ENV: PASE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: PASE_STDIO_ISATTY=N
    ENV: PASE_THREAD_ATTACH=Y
    ENV: PASE_TZ=<EST>5<EDT>,M3.2.0,M11.1.0
    ENV: PASE_USRGRP_LIMITED=
    ENV: PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: SAPSYSTEMNAME=Y60
    ENV: dbms_type=db4
    ENV: dbs_db4_schema=R3Y60DATA
    ENV: ILE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_LIBPATH=/usr/sap/Y60/SUM/abap/bin
EXECUTING /usr/sap/Y60/SUM/abap/bin/SAPCAR -flat -R /usr/sap/transD60/EPS/in -xvf /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR
SAPCAR: processing archive /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR (version 2.01)
x CSR0120031469_0080800.PAT
x SIGNATURE.SMF
SAPCAR: can not set permissions for /usr/sap/transD60/EPS/in/SIGNATURE.SMF (error 13). No such file or directory
SAPup> Process with PID 4295601 terminated with status 13 at 20140319101623!
Has anyone lse exprienced this and can share a fix?
Thank you,
-Margie

Hi,
We had the same issue, and in my opinion it is caused by the parallelisation of sapcar during SUM phase PREP_PRE_CHECK/SCANDIR_EPS0
I did see several parallel SAPCAR jobs running during this phase.
So what happens when one job extracts SIGNATURE.SMF at the same time another job tries to finalize its extraction by setting the permissions for /usr/sap/trans/EPS/in/SIGNATURE.SMF?
It can happen that permissions are being set at the same time another sapcar yust deletes this file to begin extracting.
Since we had 146 SAR archives that needed to be extracted, a retry allways ended up in 4 to 12 conflicts.
What did do the trick was adding
/sapcar/extrcact_parallel = 0
to the file
../SUM/abap/bin/SAPup.par
Just as Christoph Langer suggested.
We had to restart the whole phase, a repeat was not enough to solve the problem.

The OMS is not set up for Enterprise Manager Security

Similar Messages

Maybe you are looking for