The pathname, directory name, volume label, or filename is incorrect. ?????

Viewed 1 time
I am trying to send a file from my RTOS remote system to my Windows Host computer across the network. I keep getting this error. I have tried to build this pathname with backslashes, front slashes, double slashes, quotes, absolute path, relative path, IP address, machine name, and everything else I can think of. The "FTP Put File.vi" gives me this error no matter what I try. I can easily get and put files from the command line FTP on both of these machines. When I run my vi, I monitored the reply string and value I got from the "FTP Open Session.vi" and all looks normal. Does anyone out there know what the syntax that it is looking for should be?
C:\Inetpub\ftproot
C:/Inetpub/ftproot
c:\inetpub\ftproot
c:/inetpub/ftproot
C:\\Inetpub\\ftproot\\
C://Inetpub//ftproot//
ftp:\\192.168.1.91\Inetpub\ftproot
ftp:\\192.168.1.91\\
ftp://192.168.1.91//
ftp://192.168.1.91//Inetpub/ftproot//
etc, etc, etc.....

I like letting labview build the path. That way I do not have to try to remember various path syntax for whichever OS the vi is running on.
Message Edited by jasonhill on 05-11-2006 12:39 PM
Attachments:
path.PNG ‏2 KB

Similar Messages

How do I stop the message "user name or password for iCloud is incorrect" from popping up 2 times in a row when i try to get mail from other accounts? thank you in advance

How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4, 7.1.1 I have to select "OK" 2-4 times each time before I can read other email accounts. I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account." I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones. I want to delete the original @me & original iCloud account. When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop. Thanks in advance for your help.

Hi Suzanne,
It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
If you forgot your Apple ID password - Apple Support
After you enter your Apple ID, there are three ways you can change your password:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
So long,
-Jason

Bug:Downloading pdf file from the web,file name in dialog box populates with incorrect file name

Hi Gurus
When downloading any pdf file from the web using adobe Reader X the file name dialog box populates with incorrect file name
compared to the saved file name of the document downloaded.
Clarity
1. Download any pdf file from the web
2. Click File, Save as note the populated File Name
3. Compare the populated file name with the saved file name of the documant yuo are downloading.
4. The file Name is incorrect...
Is there any work around on this issue?Can someone please help?..
OS:Windows7
Reader: Adobe Reader X
I've tried a couple of other versions and still get the same results...

Are you downloading the file (right-click, save link as), or just opening it by clicking it?
If the latter, then what happens is the file is loaded to the temporary internet files folder by IE and assigned a temporary name, which is then used when you're trying to save it.
You can test this out by going to File - Document Properties before trying to save and looking at the file's location.

Get filename and directory name during runtime

Hi guys,
I am developing a file to file interface without content conversion, just a simple file transfer from one ftp server to another. I have to read the same filename (invent.txt) from multiple folders (mstransfer/M01/IN1, mstransfer/M02/IN1, mstransfer/M03/IN1....) that represent different stores and transfer it as it is with the same name to exactly the same directory name in the target ftp location.
My problem is found inside a dummy mapping that I have created in order to specify the target directory and the name of the file. I am doing the following:
A) A Java UDF to specify the filename
trace = container.getTrace();
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String filename = conf.get(key);
trace.addWarning("filename = "+filename);
conf.put(key, filename);
return "";
//return filename;
B) A Java UDF to specify the directory name
//write your code here
trace = container.getTrace();
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String directory = conf.get(key);
trace.addWarning("directory before = "+directory);
directory = "/usr/sap/trans"+directory;
trace.addWarning("directory after = "+directory);
conf.put(key, directory);
return "";
//return "/usr/sap/trans"+directory;
In receiver file adapter I do not specify neither a filename nor a target directory.
When I am testing it, I always get a mapping runtime error.
Any ideas?
--Evaggelos

Guys,
First of all, I am doing an end to end testing, i.e. I let the FTP adapter pick the file up and another FTP adapter delivers the file to target folder. I am definitely not testing the mapping in mapping editor.
I get the error in Request message mapping (pipeline step, which I can see in SXMB_MONI transaction) which is a dummy mapping between two message types that I have created and are based on two data types with two fields each.
The UDF's that I have created go in-between the source and target fileds of the message types/data types.
The error that I see in the trace section of the XML message in SXMB_MONI is the following:
"<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_G_SRS_FileTransfer_MNS_</Trace>
<Trace level="1" type="T">java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at"
I have included some trace.addWarning() lines in Java code to help me debug my code, but I cannot see them anywhere inside the trace to be getting executed.
I will try Bhavesh's idea and I will write the code in the Java Section of my message mapping ( either Intialization or Destrcution ) section.

About the cache's directory name

We have deployed our application through webstart, but we meet a problem.
Our application will access a directory and seach all files in the directory, but when the client download the application through the webstart, the directory name in the cache is different with the server-side directory name.
For example, the original directory name is: patch, but the directory name in the cache is: DMpatch, so the application can not find the directory now.
How can i get the exact directory name in the cache ignoring the auto added prefix "DM".
Thank you very much!
Piggy

Hope this helps:
someClassName is one of your own classes..
URL url = this.getClass().getResource( someClassName);
if (url.getProtocol().equals("jar")){
// Strip off JarURL-specific syntax.
JarURLConnection jarConnection =
(JarURLConnection) url.openConnection();
url = jarConnection.getJarFileURL();
Marcel

Pass export file/directory name in Web Engine plug-in

I use a custom Lightroom web engine plug-in that I use to publish my website (5000+ pages). Here is an example of an output section:
http://www.johnkane.com/2010-03-01-MuirWoods/index.html.
I use Dreamweaver to synchronize all the assets such as menus and links, including the plug-in files (Lua pages). Each web gallery is published to its own folder in my website. It works great except that every time I publish/republish a web gallery, I have to scroll and identify the directory in the Export / Save Web Gallery dialog box (or type the file (directory) name in for an initial export/publish).
I have created a panel text box and variable (metadata.directoryPermalink.value) that can contain the directory name. By storing this directory permalink along with the web gallery, I hope to ensure that each gallery is always published to its correct directory...
... except I don't know how to pass this variable to the export dialog box (as "File name" which actually is the directory name all the gallery files are exported to.
Do I specify this in the manifest? I don't see references in either the manifest or galleryInfo files... or in the sdk LrWebViewFactory section. Perhaps I've missed it?
Any help appreciated!
Thanks,
jk

Hi,
I haven't tried to write a web engine so don't know the answer off the top of my head. A quick glance at the SDK guide and the two SDK samples didn't give me any hints at the answer.
Before I nudge one of the gallery developers to see if they know the answer I need to confirm one thing. Can you please confirm you have a file in the same directory as your manifest using the name "myfunctions.lua", and that your require statement looks something like this:
require "myfunctions"
(Thie filename should be considered case sensitive).
I know its an obvious question but I need to ask before I ask one of the others for assistance.
Matt
UPDATE: It might also be worth having a look at Sean's 3 post series on web galleries, which is the only other resource I can recall re building web galleries.
Added additional resource re web gallery development

[Solved] a.out not recognizing the working directory

It's a little bit embarrassing because this issue doesn't seem terribly complicated, but I'm having trouble with executing the a.out file (Hello World) that gcc produces. I have to explicitly state the directory that a.out is in to run it, even though it's in the working directory. Other programs, such as Nano, recognize the working directory just fine and it is able to open files inside the working directory without having me explicitly state the full directory name.
Any help would be greatly appreciated.
Last edited by bananaman (2011-03-23 03:16:10)

The easiest and most secure way would be using the relative path to the executable:
./a.out
If you use a single directory for writing/testing your programs, you could add it to your user PATH. Not a major security risk, but if you do so, be careful what executables are in the dir.
~/.bashrc (or ~/.bash_profile):
[[ -d ~/cpp ]] && export PATH="$PATH:~/cpp"
Adding the current working directory to PATH is a security risk, so I wouldn't recommend it.
Last edited by sisco311 (2011-03-23 03:12:29)

How to change the TestStand directroy name?

Hi,
I'm interested to change the TestStand directroy name to 'TestStand' instead of 'TestStand 3.0' or 'TestStand 3.1'.
I'm facing a problem with this name. Here is an explanation:
Right now we have TS3.0 and TS3.1 installed on several computers. We work on projects that share modules (like GPIB). These modules are in a ClearCase system, so each one of us can use them and modify them. These modules call to some TS files like 'tsutil.fp' (which is located on the C drive). As a result of different TS names, the project which formerly called a file in TestStand 3.0 directory is now looking for the same file in TestStand 3.1 directory which it doesn't find...
Can you advice me how to modify the TestStand directory name to 'TestStand'?.
Thanks
Rafi

In TestStand, if you go to the Configure>>Search Directories menu, you can add user defined paths to search directories. You have the option to add/remove/move up and move down the search directories. However these options are valid only for user defined search directories. The paths to directories that come shipped with TestStand cannot be removed or moved up/down. In your case, I would suggest that you create a custom path to the directory where you want to search and move it right to the top of the list using the "move up" button. In this way that particular directory will be searched first.
Thank you
Nandini Subramaniam
Applications Engineer
National Instruments

WebCenter Form Recognition WebVerifier directory name {Directory Path} is Invalid

Hi
I'm facing the below issue while trying to open the Web Center Form Verifier using web Verifier.
The WebVerifier directory name {Directory Path} is Invalid. please contact your system administrator.
OS : Window Server 2008 R2
Software: Oracle WebCenter Form recognition 11.1.1.8.0
find the attached error screen shot and help out with the solution.
Thanks
Sanjeev

You are getting this message because the WFR web server is trying to access the project file in a directory that is not valid on that server. I assume that path is correct on the Designer machine but the web server is on a different machine?
Assuming the project file is on a file server, you should share that folder then open the project in Designer via the UNC path to the share. Then, go to the Options menu and select the Users, Groups and Roles... option. On the Users tab of the Project Authentication dialog, ensure that the Allow Database Authentication option is checked, then click the Export to Database... button. That will create an entry in the database for that project pointing to the UNC path instead of the local path, so the web server should then be able to access it (provided you have assigned sufficient permissions on the share).
Alternatively, you could copy the project folder structure to the web server on the same path as it is on the Designer machine. This should work but will cause issues for ongoing administration of the project, as you will need to keep the copy on the web server synchronized with that on the Designer machine. I wouldn't recommend doing this.

How do I change home directory name?

In FINDER, the home directory name is from an old employee. How can I change it?

Log out and then into a different user account, or create one from System Preferences. If so desired, control-click the account in the Accounts or Users & Groups pane of System Preferences, choose Advanced Options, and change the name and home properties; if the computer happens to be running Mac OS X 10.4, the instructions are significantly different.
(71132)

How to change the owner's name on the mac

My friend bought me a mac from the US and he registered the mac using his name and now i need to have it changed to my name. Even the i chat has his user name and am not able to change it.

This may be an easier method for you to do what you want. Open Accounts in *System Preferences*. Click the padlock to unlock your admin account.
Right click on your *My Account* name in the left hand window. Choose *Advanced Options*. This brings up a window that will allow you to change the short name easily. As long as you don't mess with any of the other settings you should be OK. Change the Account name and the User directory name to match.
Be sure to go under sharing in System Preferences and change the computer name also.

Real directory name of a file path?

How do I find the normalized directory name of a path?
For example, when you cd to a directory you get what ever was in the cd command, not the real directory name.
See:
mac $ ls -l co
lrwxr-xr-x 1 mac staff 15 Aug 9 19:38 co@ -> /Users/mac/cons
mac $ cd co
mac $ pwd
/Users/mac/co
mac $ cd .
mac $ pwd
/Users/mac/co
mac $ cd ..
mac $ pwd
/Users/mac
mac $ cd cons
mac $ pwd
/Users/mac/cons
mac $ ls -ld .
drwxr-xr-x 31 mac staff 1054 Aug 9 12:12 ./
mac $ pwd
/Users/mac/cons
mac $
I this example, I want /Users/mac/cons not /Users/mac/co
Robert

My results from /bin/pwd are different.
Found out about the -P option to pwd command. There is also the set -P which effects the pwd result. see man pwd and help pwd and help set
something so simple is so complicated.
Thanks for the function. Pointed out a bug in the script I am working on. I am not checking the user passed me a directory path. Could be a file.
mac $ cd co
/Users/mac/co
mac $ /bin/pwd
/Users/mac/cons
mac $ PWD="" /bin/pwd
/Users/mac/cons
mac $ settings
mac $ pwd
/Users/mac/co
mac $ man pwd
mac $ pwd -P
/Users/mac/cons
mac $ pwd -L
/Users/mac/co
mac $ cd /USERS/MAC/CO
/USERS/MAC/CO
mac $ pwd
/USERS/MAC/CO
mac $ pwd -P
/Users/mac/cons
mac $ pwd -L
/USERS/MAC/CO
mac $ /bin/pwd
/Users/mac/cons
---------- env
MANPATH=/sw/share/man:/usr/share/man:/usr/local/share/man:/usr/X11R6/man:/sw/lib /perl5/5.8.6/man
TERM_PROGRAM=Apple_Terminal
TERM=xterm-color
SHELL=/bin/bash
PERL5LIB=/sw/lib/perl5:/sw/lib/perl5/darwin
TERM_PROGRAM_VERSION=133-1
OLDPWD=/USERS/MAC
USER=mac
__CF_USER_TEXT_ENCODING=0x3E8:0:0
PATH=/sw/bin:/sw/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/Developer/Tools:/usr/X11R6/ bin
XML_CATALOG_FILES=file:///Library/DTDs/catalog file:///etc/xml/catalog
PWD=/USERS/MAC/co
EDITOR=/usr/bin/pico
PS1=\u \$
PS2=additional input:
SHLVL=1
HOME=/Users/mac
INFOPATH=/sw/share/info:/sw/info:/usr/share/info
DISPLAY=:0.0
SECURITYSESSIONID=603760
_=/usr/bin/env
--------- set
BASH=/bin/bash
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release" [5]="powerpc-apple-darwin8.0")
BASH_VERSION='2.05b.0(1)-release'

"There was an error opening this document. The filename, directory name, or volume label syntax is i

"There was an error opening this document. The filename, directory name, or volume label syntax is incorrect."
I tried different versions, no avail.
I think it has to do with the password somehow, but I do not know. I can copy the files from the web folder to my desktop and they open fine (after entering the password AGAIN), but I can not open them directly form the web folder - it does not ask for the password again, just pops up the error.
Adobe's support really upset me (insert explicative here) by keeping me on the phone for 20 min, collecting all sorts of information about me (not the problem) with some lady who barely spoke English, just to tell me to go to the website. No surprise they need to charge for tech support, customer service is doing everything but "service". I hate companies that do this. I am thinking of using another PDF reader, I have heard good things about them. Check
http://en.wikipedia.org/wiki/List_of_PDF_software
Has anyone ever been able to find a fix? I can not find anything on this site.

Howdy, Moritz!
Thanks for the suggestion, but this is not an issue of filename and language conflicts, at least in my environment. I highly doubt that's the root cause of this issue.
The PDF files in my tests have all had very simple names, such as 123.pdf and test.pdf, as well as more complicated names with spaces in them. Nothing about the files contains anything outside of the English language, including the content and filenames.
From everything I've been able to determine, this is a WebDAV-related security issue that affects programs like Acrobat Reader. I know for a fact that MS's KB892211 WebDAV patch doesn't create the issue, however MS's update to that 892211 patch DOES create the issue. As I've outlined earlier in this thread, my extensive testing has proven this more than once.
At this point, I haven't been able to accurately uninstall the update to 892211 after the update has been installed. And, as far as I can tell, the update to 892211 comes down from MS as a Office and/or Windows Update component. So, everyone has it, the uninstaller doesn't work, and there's no documentation detailing what registry entries are being changed when the update to 892211 is installed.
My ultimate goal is to bring a test machine to the point just before the update to 892211 goes on, fire up the Registry, Process, and File monitors on my test box, and install the 892211 update. This should give me an accurate picture of what I need to restore in order to rid the machine of the update to 892211.
Until Microsoft officially fixes the issue, I am not totally sure how this will be resolved. I've ceased my work on the issue for now since copying the PDF file from the WebDAV share to the user's desktop gets the user what they wanted in the first place - the ability to open the PDF file!
Maybe, once some other projects slow down a bit, I might get back to creating a solution, but it's going to be a "hack" no matter which way you slice it. I'd much rather MS spend their time creating the solution. If I have to do it, my fee to MS will be quite HIGH! :*)
George B.

Server 2003 to 2008 DCPromo fails - "The filename, directory name, or volume label syntax is incorrect"

I've done the adprep32 on 2003 server standard for /forestprep, /domainprep, and /rodcprep without an error, as instructed by several docs on web. But in final stage of dcpromo on 2008 server standard, it fails with
Active Directory Domain Service could not replicate the directory partion CN=Schema,CN=Configuration,DC=domain,DC=local from the remote Active Directory Domain Controller Old-DC.
"The filename, directory name, or volume label syntax is incorrect."
I've found several docs online, but non-helped. After about 20 hours of numbing fingers, I found docs to manually move DNS and DHCP from 2003 server to 2008 server. But the Active Directory on 2008 server won't start because I can't get that
DCPromo to finish.
Is there a way to manually move the login ID's and passwords to 2008 server and activate the Active Directory Service?
Thanks.

I've already looked at it, and used it to google. Tried every suggestion I could find. Below is snippet of the file:
09/18/2014 19:53:26 [INFO] Creating the NTDS Settings object for this Active Directory Domain Controller on the remote AD DC NT-FS1...
09/18/2014 19:53:26 [INFO] Replicating the schema directory partition
09/18/2014 19:53:26 [INFO] Error - Active Directory Domain Services could not replicate the directory partition CN=Schema,CN=Configuration,DC=domain,DC=local from the remote Active Directory Domain Controller NT-FS1. (123)
09/18/2014 19:53:26 [INFO] EVENTLOG (Error): NTDS General / Internal Processing : 1168
Internal error: An Active Directory Domain Services error has occurred.
Additional Data
Error value (decimal):
-1073741823
Error value (hex):
c0000001
Internal ID:
300162a
Hi
can you navigate to the following log file: %SystemRoot%\Debug\Dcpromo.log let us know what it contains.

The filename, directory name, or volume label syntax is incorrect

Hi All,
Was try to run the ADF Sample tutorial available on the Oracle site.
Am using Virtual box for the windows environment for running Jdeveloper 11g.
my data base is up and running...
I can test the Model by running AppModule... its perfect... getting record and can update them as well.....
When jsf page tried to run ... errored as below...
Deployment cancelled.
[01:00:16 PM] ---- Deployment incomplete ----.
[01:00:16 PM] The filename, directory name, or volume label syntax is incorrect
Couldnot fnd useful info by googling...
Please let me know if anyone come across such an error?
Thanks,
Kittu

Yes, same directory structure is created automatically when i tried to run the jsf page from jdeveloper, which was created newly from new project application.
previously once i tried of manually renaming "system11.1.2.4.39.64.36.1" to "system11", but when i ran my page, new dorectory "system11.1.2.4.39.64.36.1" created again and same error encountered.... then i removed two of the above... and just build the new project in jdeveloper and ran it... asked me for weblogic user and password, thats it ...page was running fine, when i got n check the directory same old name "system11.1.2.4.39.64.36.1" was created...
Thanks,
Kittu

The pathname, directory name, volume label, or filename is incorrect. ?????

Similar Messages

Maybe you are looking for