Translation Worklist - not seing the results

Hi everyone,
I've managed to use the Translation tool to create and successfully translate a worklist. It contains an iView pointing to a test JSP page, as well as a ResourceBundle. All got translated ok and the worklist status is marked as "Translated". However, upon running my JSP page with a user that has French as it's UME language setting, I still see the English text although the same page tells me the Locale is now French.
If I manually included the French version of the ResourceBundle inside the PAR file, it would work like a charm. But what did I gain by using the translation tool to translate the English ResourceBundle if I did it manually?
Is this the expected behavior?
Thank you,
Adrian

So I figured out the issue.  For some reason the data that was in the WriteBack table for any currency other than LC was not showing up in the report.  Once I optimized the application the currency conversion showed up as expected. 
Has anyone had this problem before.  Any known solution?
Thanks,
Nick

Similar Messages

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • I made some changes to my header, I did not like the results, so I changed them back and now I cannot edit the content of the page.  It is all grayed out..

    I was making some changes to my header file.  I did not like the results of the changes, so I changed them back.  When I did make the change back, I lost the ability to edit the page.

    Unfortunately, a picture of the code is not useful.
    The best way for us to help is if you put a copy of your problem page on a server and post a link for us.
    (rename it to avoid disrupting your live site)
    A less desirable method is to copy & paste your code in a post in the the web forum (not by email)
    https://forums.adobe.com/thread/1615559

  • Custom Search Portlet not getting the results as expected.

    Hi All,
    I am using CustomSearchPortlet and I am having following problems. I created an itemtype IT with attributes A1,A2.Then I configured my custom search portlet to search based on A1,A2 attributes only. I have created 3 instances of items Item1,Item2,Item3 based on itemtype IT as follows
    Item1(A1=value11,A2=value12)
    Item2(A1=value21,A2=cat22)
    Item3(A1=value11,A2=value32)
    and when I search for value11, I get Item1,Item3 as results. Till here it was nice and behaving as expected. Suddenly after some time, it stopped working and i am not getting the results I used to get before. The only thing i remember to have changed in the meanwhile was to change the A2 attribute values of some of these items. my searchtext remained the same as value11. I was confused as to why the custom search portlet is not getting these results that it was getting before...Thanks for any help in solving this.
    Thanks,
    Prasanth.

    Hi,
    If Oracle Text is enabled in your portal, the updated items need to be synchronised before they can be returned in the Search. Since you updated those items, though not changing values for this particular attribute, it will be in the queue for indexing and hence will not be returned until it is indexed.
    Thanks.

  • I can not monitor the results of color correction made ​​in Color

    I can not monitor the results of color correction made in Color come out the Blackmagic HD exrteme 3. Since the Final
    I have cut the output correctly. I made the settings in the setupproject and setings but I had no success.

    IN the USER PREFERENCES part of the SETUP TAB, on the right, there should be a VIDEO OUT option...choose the one that matches your media.

  • Can not locate the results to a published survey

    I created an online survey for a municipality and published it, now I can not locate the results which have been posted.
    When it was first published, and we had submitted a few tests of the system, I was able to see the responses, who had responded and the answers.
    Now I can find only the form, no responses.

    Just hide the Menu Bar. Right-click on the Menu Bar and uncheck Menu Bar.
    The Firefox button is there by default in Windows Vista and 7 but not Windows XP.

  • In Premiere I can edit an avi or mov clip but I can not save the result as a like file.  Why not???

    In Premiere I can edit an avi or mov clip but I can not save tghe result as a like file.  What do I have to do???  It only saves a project.  Under 'File' the 'Export' function is greyed out.  I need help baddly.
    [email protected]
    Bill Schoon

    Boatbuilder
    Let us start from the beginning.
    It has been established that you have Premiere Elements 10. On what computer operating system is it running?
    There has not been a File Menu/Export/Movie export opportunitity in Premiere Elements since version 7. We are not up to version 12.
    For Premiere Elements 10, your export opportunities are all in Share/ including one for Computer. Under Computer there are several choices. The ones that you see are Adobe Flash Video, MPEG, and AVCHD. The others you have to scroll down to. And those choices are AVI, Windows Media, QuickTime, Image, and Audio. You do not have to use the scroll bar for this. You can click on Adobe Flash Video panel to get it to turn black. Then use the down arrow to go down the list and the up arrow to go up the list. Once you get to a category, you can select a preset and go with it or customize it under the Advanced Button/Video Tab and Audio Tab of the preset.
    If you post the properties of your source media that you want to try to match in the export, I would be glad to suggest the exact settings for you.
    We will be watching for your follow up with details.
    Thank you.
    ATR
    Add On...The Premiere Elements 10 File Menu is for more than Saving, just not exporting. One of the key features that can be access there is the Project Archiver. More on that another time.

  • Field"Code group" is not in the result for report CRM_SRV_REPORT

    Hi Guys,
    For the tx CRM_SRV_REPORT - Service Process Monitor, the field "Code group" is not in the standar result, but, is in the initial screen for filter selection.
    This field is not available in the layout modification.
    How can I add this field to the layout of the result list?
    Regards,
    Lyda

    Hi Lyda,
    Additional field cannot be added in the layout of the result list.
    If you will observe the code of the report CRM_TSRV_REPORT, in the field catalog, there is not Code, code group etc., hence it is not seen in the layout.
    Since it is a std report it cannot be modified, either u can create a Z report by copying this or u can raise an OSS message for this.
    Regards,
    Shalini Chauhan

  • Statement.close() Not closing the Result set

    Hi all,
    I have the following code which invokes a procedure in Oracle database
    public static callProcedure(Connection connection,String procedure){
    ResultSet resultSet = null;
    CallableStatement callableStatement = null;
    try {
    callableStatement = connection.prepareCall(procedure);
    callableStatement.registerOutParameter(1,OracleTypes.CURSOR);
    callableStatement.execute();
    resultSet =((OracleCallableStatement)callableStatement).getCursor(1);
    } catch (Exception exception) {
    exception.printStackTrace();
    } finally {
    try {
    callableStatement.close();
    } catch (SQLException sqlException) {
    sqlException.printStackTrace()
    return resultSet;
    Ideally if i try to iterate through the result set which is returned then it should give me resultset closed as i am closing the resultset. But this is not happening.
    Please anybody can explain the isue

    Hi,
    That is not easy to explain, I might take a guess and say that a statement cache is being used therefore the statement is not actually being closed.
    I always close the reultset then the statement so wouldn't notice this behaviour.
    Why are you returning a resultset anyway? If you really need to do this I would suggest using a disconnected resultset:
    OracleCachedRowSet ocrs = new OracleCachedRowSet();
    ocrs.populate(resultSet);
    return ocrs;

  • Business rule not showing the result

    When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
    We are on 11.1.2
    and im making BRs through Calc Manager (Wizard Based)
    Edited by: ar_aff on Mar 24, 2011 9:56 PM

    I think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;

  • Validator not returning the results.

    Hi All,
    I have extended the StringValidator class in order the create a username validator. When a new user is being registered, the username is validated on the server to check if it exists.
    The code is not throwing errors and i know the remoteobject calls work. The push sets the message, but the problem is that the result is not returned.
    Is the flow correct?
    public class PosUsernameValidator extends StringValidator {
              private var userServiceRO:RemoteObject = new RemoteObject();
              private var validatorResults:Array = new Array();
              public function PosUsernameValidator(){
                   super();
                   userServiceRO.destination = "UserService";
                   userServiceRO.getUserByUserName.addEventListener("result", getUserByUserNameRH);
                   userServiceRO.getUserByUserName.addEventListener("fault", getUserByUserNameFH)
              override protected function doValidation(value:Object):Array {
                   validatorResults = super.doValidation(value);
                   return doForUserName(value);
              private function doForUserName(value:Object):Array{
                   userServiceRO.getUserByUserName(String(value));
                   return validatorResults;
              private function getUserByUserNameRH(r:ResultEvent, t:Object = null):void{
                   var user:User = r.result as User;
                   if(user!=null){
                        validatorResults.push(new ValidationResult(true, null, "Username error","Username already taken!"));
              private function getUserByUserNameFH(f:FaultEvent, t:Object = null):void{
                   Alert.show(ObjectUtil.toString(f));

    At first glance I would say that trying to combine your client-side and server-side validation into a single class like that is not a good idea. In doForUserName() you are making an asyncronous server call. The validatorResults will get returned immediately, so by the time your handler method executes it is already too late. Rather than trying to do both sets of validation at once, remove the server-side code from this class and use it as a normal flex validator. Then in your component (or better yet in your controller class if you follow an MVC pattern) call your service method after the client side validator returns a valid result.

  • OBIEE Answers does not display the result set of a report query

    Hi,
    We have a pivot table type of report in Oracle Business Intelligence Enterprise Edition v.10.1.3.3.2 Answers that has the following characteristics:
         3 Pages
         3 Sections , 4 Columns
         18363 Rows in the result set
    As per the NQQuery.log, the query for this report executes successfully resulting in 18363 rows. However, nothing comes up in the display on Answers. Moreover, no error is reported. The instanceconfig.xml file has the following setting:
    <PivotView>
         <CubeMaxRecords>30000</CubeMaxRecords>
         <CubeMaxPopulatedCells>300000</CubeMaxPopulatedCells>
    </PivotView>
    Even with these settings, Answers just returns a blank page - nothing is displayed in the name of the result set of the report query. Has anyone encountered this problem scenario before?
    Any help is much appreciated.
    Thanks,
    Piyush

    Hi Fiston / Pradeep,
    Thanks for your inputs. A few points to note:
    -> I am actually not getting any error message in answers or the NQQuery log. Moreover I am not getting any errors related to "query governor limit exceeding in cube generation" also.
    -> I have other pivot table type of reports in the same repository that work fine. In fact the report which has this issue even works sometimes - what actually is happening is that if I alter the number of sections from 3 to 4, then the result set changes from 14755 Rows to 18363 Rows and as per the NQQuery.log in both cases the query completes successfully. However, when the result set has 14755 rows, I get to see the output in Answers; however when the result set is 18636 rows, the Answers screen just goes blank and does not show any output or error. This makes me believe that there is some parameter in instanceconfig or the NQSconfig file - I have tried a lot of changes but nothing works !
    Any help is much appreciated.
    Best Regards,
    Piyush

  • ViewObject Query [Expert Mode] not fetching the results

    I have modified the EO query by selecting the Expert Mode.
    When i ran the query in Sql plus im able to view the records, but when i execute the view object, im unable to see the records.
    Any help?
    Thanks,
    Raghu

    Hi ,
    There is no where clause for the query. Also i have set maxfetchSize as -1.
    Hence it should retrive the results from database. Also i printed the Query using getQuery() method.
    When i ran the same query offline, i was able to retrive the values.
    1. The VO has an entity usage.
    2. The VO query is modified in Expert mode.
    When vo.executeQuery() is called, it returned 0 records
    Following messages are displayed in the log
    [389] ViewRowImpl.createMissingEntities: returning null, no matching discrVals for ArSepaMandatesEO in ArSepaMandateDtlsVO
    [390] Discr values: 1
    [391] ViewRowImpl.createMissingEntities: returning null, no matching discrVals for ArSepaMandatesEO in ArSepaMandateDtlsVO
    [392] Discr values: 1
    [393] ViewRowImpl.createMissingEntities: returning null, no matching discrVals for ArSepaMandatesEO in ArSepaMandateDtlsVO
    [394] Discr values: 1
    [395] ViewRowImpl.createMissingEntities: returning null, no matching discrVals for ArSepaMandatesEO in ArSepaMandateDtlsVO
    [396] Discr values: 1
    [397] ViewRowImpl.createMissingEntities: returning null, no matching discrVals for ArSepaMandatesEO in ArSepaMandateDtlsVO
    [398] Discr values: 1
    Thanks,
    Raghu

  • SCCM query not returning the results I want

    I would like to use a query that will query my systems that have a particular piece of software (Flash), but I do not want it to include servers that are in a particular group.
    Explanation: I have about 20 servers with Flash installed that require it.  About half of them I can update regularly, the other half I can't.  So, I have an AD group for each - the ones I can patch, and the ones I can't.  I want the query
    to look for systems with "Adobe Flash" in the display name, but exclude the servers in both of these groups.  That way I can create a collection of computers that have Flash installed where it shouldn't be and can keep an eye on where it is
    being installed.
    The query looks like this in the criteria tab;
    Add/Remove Programs.Display Name is like "%Adobe Flash%"
    and
    System Resource.System Group Name is not equal to "LAB\FlashPatchGroup"
    The query language looks like this;
    select distinct SMS_R_System.Name, SMS_R_System.description, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName, SMS_G_System_ADD_REMOVE_PROGRAMS.Version from  SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID
    = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName like "%Adobe Flash%" and SMS_R_System.SystemGroupName != "LAB\\FlashPatchGroup"
    The problem I am having is that when I run the query, it is pulling everything with Flash, including the ones in the AD group.  Anyone see a problem with the way I'm doing this?

    Hi Jorgen,
       Thank you for that - very helpful because I actually knew nothing about sub-select queries.  So now the overall logic makes sense, but unfortunately the only examples I've been able to find don't cover exactly what I want to do.
    The overall examples I have found work like this;
    - Create a query to find computers with a particular application installed
    - Create a subselect query that says find users that are NOT subject to the preceeding query
    What I need to do, however, is this;
    - A query finds computers with a particular piece of software installed
    - It compares the computer to 2 Active Directory groups I have created.
    - The query produces all computers with that particular piece of software that is NOT in the AD groups I have created.  This way I can easily identify servers that have Flash installed that shouldn't.
    Any ideas?  I have been trying to follow the subselect queries to do something similar but I just cannot make it work.  I've tried to create a subselect query that says "Add/Remove Programs Display Name contains "%Adobe Flash%" but is not in (subselect
    query)" and it just doesn't like it.
    Regards
    Juice

  • SQL*plus not displaying the result of XMLELEMENT

    HI,
    I am using SQL*Plus: Release 10.1.0.4.2
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    When I run the following query in SQL*PLUS, I get nothing displayed. However when I run the same query connecting to the same database using SQL Developer then I get the result
    SQL> select XMLELEMENT("form_id",form_id)
    2 FROM collections;
    XMLELEMENT("FORM_ID",FORM_ID)
    In SQL developer
    <form_id>101</form_id>
    I set long and longchuncksize to 32K , and I change linesize, pages, but nothing helped
    Is there any configuration that I have to do, so that SQL*plus display the result of “ select XMLELEMENT("form_id",form_id) query.
    Appreciate you help, thanks

    From a fresh start ;) :
    SQL*Plus: Release 10.1.0.4.2 - Production on Fri Feb 26 15:29:04 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select xmlelement("value", a.object_name )
      2  from   all_objects a
      3  where  rownum <= 5;
    XMLELEMENT("VALUE",A.OBJECT_NAME)
    SQL> select xmlelement("value", (select b.object_name
      2                              from   all_objects b
      3                              where b.object_name = a.object_name
      4                              )
      5                   )
      6  from   all_objects a
      7  where  rownum <= 5;
    XMLELEMENT("VALUE",(SELECTB.OBJECT_NAMEFROMALL_OBJECTSBWHEREB.OBJECT_NAME=A.OBJE
    <value>ICOL$</value>
    <value>I_USER1</value>
    <value>CON$</value>
    <value>UNDO$</value>
    <value>C_COBJ#</value>
    SQL> show all
    appinfo is OFF and set to "SQL*Plus"
    arraysize 15
    autocommit OFF
    autoprint OFF
    autorecovery OFF
    autotrace OFF
    blockterminator "." (hex 2e)
    btitle OFF and is the first few characters of the next SELECT statement
    cmdsep OFF
    colsep " "
    compatibility version NATIVE
    concat "." (hex 2e)
    copycommit 0
    COPYTYPECHECK is ON
    define "&" (hex 26)
    describe DEPTH 1 LINENUM OFF INDENT ON
    echo OFF
    editfile "afiedt.buf"
    embedded OFF
    escape OFF
    FEEDBACK ON for 6 or more rows
    flagger OFF
    flush ON
    heading ON
    headsep "|" (hex 7c)
    instance "local"
    linesize 80
    lno 9
    loboffset 1
    logsource ""
    long 80
    longchunksize 80
    markup HTML OFF HEAD "<style type='text/css'> body {font:10pt Arial,Helvetica,sans-serif; color:blac
    newpage 1
    null ""
    numformat ""
    numwidth 10
    pagesize 14
    PAUSE is OFF
    pno 1
    recsep WRAP
    recsepchar " " (hex 20)
    release 1002000300
    repfooter OFF and is NULL
    repheader OFF and is NULL
    serveroutput OFF
    shiftinout INVISIBLE
    showmode OFF
    spool OFF
    sqlblanklines OFF
    sqlcase MIXED
    sqlcode 0
    sqlcontinue "> "
    sqlnumber ON
    sqlpluscompatibility 10.1.0
    sqlprefix "#" (hex 23)
    sqlprompt "SQL> "
    sqlterminator ";" (hex 3b)
    suffix "sql"
    tab ON
    termout ON
    timing OFF
    trimout ON
    trimspool OFF
    ttitle OFF and is the first few characters of the next SELECT statement
    underline "-" (hex 2d)
    USER is "HR"
    verify ON
    wrap : lines will be wrapped
    SQL>
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for