Under the column firld value new variable needs to be displayed in

hi
i ahve a query
presently in sap script output in main window
these three fields are coming i want to add a new line ie bar code for the field value which is coming below it
example
present output
number item    total amount       unitvalue
001       dxs     22222                 3456
002     tcg       44545               45464
desired output change needed
number item    total amount       unitvalue
001       dxs     22222                 3456
                                              bar code for 3456
002     tcg       44545               45464
my question is kindly let me know how to increase the space next line how to get below the earlier value coming
what is code for next line and if i put it below that field in the column unit value will it be displayed and automatically space created for whole line??? and output as above comes
pls suggest
regards
Arora

closed
duplicate thread

Similar Messages

I downloaded a new tv series on the computer, when a new episode needs to be downloaded I can't for some reason get it on my iPad when it's synced

I downloaded a new tv series on the computer, when a new episode needs to be downloaded I can't for some reason get it on my iPad when it's synced

Do you have enough storage space on your iPad?
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

IF NEW VARIABLE IN SQL QUERY, DISPLAYS AS LAST COLUMN + rpad not working

Hello everybody and thank you in advance,
1) if I add a new variable to my sql query to select a column which was already in the table, it shows it in the report table as the Last column to the right. That is, if I add "street" to
something like city, postcode, street, store, manager, etc, instead of placing street between postcode and store, it places it as i said as the last column to the right.
2) When values are entered into the cells of the tables, yes, they do expand it to their needed lenght, But, only if it is one word. If it is two, like when i enter the value "very good"
then it takes two lines so as with a carriage return within the cell, thus, making it too high the row. I tried to padd spaces with rpad but it did not work. something like rpad(stock, 20,' ')
I must say that the table is in the same page where there is a Form, so as the table grows in lenth it is actually squeezing the form located right on its left.
3) rpad did not work with the most simple syntax, but less would with what i need because it turns out i am using DECODE in order to do a conversion between value displayed and
value returned in my select list of values, something like : DECODE (TO_CHAR (stock),'1','Deficient','2','Average','3','Good','4','Very Good',null) AS stock,
so, i have tried to put the rpad there in several places but either it gave parsing error or it left the column empty not picking any values.
thank you very much
Alvaro

Alvaro
1) That is standard behaviour of apex builder. You can change the display order with the arrows in the report attributes column report.
2) You will have to play with the style attributes of the column to accomplice this. For instance style="white-space:pre;" in the Element Attributes of the column attributes. White-space:normal would thread several space (' ') as 1. So no matter how many you add with rpad they will be shown as 1.
Or set a width either as attibute or in a style class for that column.
Nicolette

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

Mail: no message appears under the column of messages.

I probably did something which changed the window. No message appears under the list of messages. What did I do wrong?

What version of OS X are you using?

Unable to find the column pay value and monthly salary in element entries

hi,
iam unable to find the payvalue and monthly salary in element entries form.
people enter and maintain> assignment > entries >entry values..
please tell me the table and column where the payvalue and monthlly salary is going to get populate.
Thanks,
vijetha.c

It seems that you're using an application to connect to an Oracle database. It's general Oracle Database Forum, so you should put your question under correct topic
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Mac Book Pro 13" LPTP-Photo Booth Recorded Video File won't find my video/movie that I recently recorded from Sun 9-1-13. Is there a way I can retrieve the files under the Time Machine or will I need to download something for iPhoto Booth?

I have been having the most difficult times with the use of iPhoto Booth for recording movie files of church services. It seems if I make a rename on the files, for some odd reason, I cannot find it in any of my Files Folders in Finder. I need to know is there a more simple way to retrieve movie files thru iPhoto Booth or is there something I may can download to fix this issue? Also, is there a way the videos can be flipped around to not a mirror image, but to a reverse camera? Please anyone who recognizes this problem, contact me ASAP. Thank you for your support!

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Tracking the change of value/ New insert within a table

Hi!
Can you please suggest any way to track the change/s we are making in the Table. I tried the following:
1. Activated the Log option for the table in Technical Setting
2. Through SCU3 we are able to see the changes that has occurred in the table.
3. I checked the option of tracking of change for a data element in further characteristic of the data element, say for matnr this is active.
Now problem lies:
1. The output available shows only the key field/s of the created/deleted record.
2. No track for the changes of any non-key field(:>(
Objective is to track any change in any field of any record of the table.
Please can you suggest on this.
Best wishes,
Atanu

Hi Atanu,
Change Documents might be what you are looking for. SAP uses these to track changes in all important documents (Material Master, PO, SO..), and these changes can be viewed using CDHDR and CDPOS. For more information on how to enable the same, pls see the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa0b1a493111d182b70000e829fbfe/frameset.htm
Sudha

What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

Hi all,
I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

ARealMac(PPC)User wrote:
...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could go on the external.
In any case, your data is more important than your SSD, so back up, back up, back up.

Need to fetch the column value which is not null

Hi All,
I have table
please find the table with the values
emp
eno     ename     addr1     addr2     addr3     postcode     phone     Default
1     null     null     null     null     null     null     Abc
null     name     null     null     null     null     null     Abc
null     null     null     null     null     null     123     Abc
5     null     null     abcdef     null     null     123     Abc
i need select the column with value alone.
Is it possible with a query.
My output for 1 row should be
eno,default
1, abc
I dont want to fetch the null value columns. I need to query to fetch for whole table.
Regards,
Mohanarangan K

Table values
eno     ename     addr1     addr2     addr3     postcode     phone     Default
1     null     null     null     null     null     null     Abc
null     NAME     null     null     null     null     null     Abc
null     null     null     null     null     null     123     XYZ
5     null     null     abcdef     null     null     123     XYZ
select from emp where default = 'XYZ'
It should fetch the
O/P:
phone default
123 XYZ
eno addr2 default
5 abcdef xyz
this way my output should appear. can you help me in this

Printing the totals of 1 column under another column

Hi all,
I have an internal table with 3 fields A, B, C .
I want to print the subtotal of the column 'C' under the column 'A'.
eg:
Material_Group    Matnr     Cost
MG1                   M1         C1
MG1                   M2         C2
(C1 + C2)
(This should come under the column "Material_Group" instead of the column "Cost" )
Hope that the requirement is clear. Please help me out in this ..
Thanking you in advance,
Shankara Narayanan T.V

Hi,
Please use the 'At New' command to get the new material group. take the sum in a variable and use the write statement as shown below.
Write:/ sum under 'Material_group'
Thanks,
Ajith V

Fetch the column title and evaluate with another value.

Hi all,
I am new to SAP SDK and am trying to populate the Forecast matrix with quantities for items defined in Sales Order and for the delivery date mentioned in SO.
I want to fill in the quantities for the respective item code in the date column of Forecast.
For ex: Sales Order has an item M which has a delivery date of say 15/12/2010 and quantity as 100 then when i want to fill this in Forecast how do i fill 100 Qty in the column with title date as 15/12/2010?
As the column id are all variables in Forecast screen how best can i search for a particular date in the number of columns via code.
Sample code if provided will be useful..
Thanks in advance
Regards
Rohan S Kamble

The following link might help you in achieving this
Re: Make the column title with value month_year based on the fiscal year/period

Store a value in variable from Java using Jython

Hi all,
I want to send some arguments to a java program and a small logic will be applied there and it will return a value.I need to capture that result in a variable and to store that in a target column.
For Ex:
I wrote a java program which handles the arguments and applies the logic and it will return a string.Then i made a jar out of this java class and placed in ODI Drivers:
I have done the following at Stored Procedure using Jython Technology selected.I am passing the column data using a variable created at ODI.
Logic is my Java Class and result is the method which does the logic process
import Logic
arg1=#arg1
arg2=#arg2
arg3=#arg3
arg4=#arg4
result
Logic lop= new Logic()
result=lop.result(arg1,arg2,arg3,arg4)
Now i want the result to be applied to a particular column at target table.how can i a store that result in a variable.am i going right or any other suitable way is there ?
Plz guide me

Use AddResource to add Javascript in your BackingBean Code and pass the value to your javascript code.
JSCookMenu and other dynamic adding of javascript to a JSF-JSP page is done using AddResource....

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Auto generate the primary key value for eah valid insertion

i have a table EMP having emp_id, name and age.
EMP;
E1 John 23
E2 Mary 25
created a form/report page on the table. the report page displays all the columns. while creating new entry, the emp_is hidden and the name , age are displayed. on successful insertion the emp_id is populated with 1 rather then E3.
1 Rick 22
E1 John 23
E2 Mary 25
how do i ensure that the new row inserted has a value E3 and the subsequent entries, emp_id is incremented by next sequence.

If your emp_id is not numeric and needs to be 'E' + sequence then you need to delete the existing trigger and create a new one like this:
CREATE OR REPLACE TRIGGER emp_bi_trg
   BEFORE INSERT
   ON emp
   FOR EACH ROW
BEGIN
   IF :NEW.emp_id IS NULL
   THEN
      SELECT 'E' || emp_seq.NEXTVAL
        INTO :NEW.emp_id
        FROM DUAL;
   END IF;
END;
/Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Under the column firld value new variable needs to be displayed in

Similar Messages

Maybe you are looking for