Unsupport encoding error in demo program

I downloaded the xdk C++ version 9.0.1 for Sun Solaris. I compiled the demo for parsers.
I run one of the demo program, I got the following error:
XML C++ DOM sample
Initializing XML package...
Failed to initialize XML parser, error 201.
error 201 which stands fo unsupport encoding.
Which encoding should I use for all the demo xml files?
thanks
Eva

The environment variable ORA_NLS33 must be set to point to the location of the NLS data files. On Unix systems, this is usually $ORACLE_HOME/ocommon/nls/admin/data. On Windows NT, this is usually $ORACLE_HOME/nlsrtl/admin/nlsdata. Starting with version 9.0.1, C and C++ XDK releases that are downloaded from OTN contain an nlsdata/ subdirectory. You must set the environment variable ORA_NLS33 to the absolute path of the nlsdata/ subdirectory if you don't have an Oracle installation.

Similar Messages

Content Encoding Error Message re invalid or unsupported form of compression

After installing the last update, when I would attempt to go to various websites, even google, I would get this message on some sites not all. I did not get on IE or chrome.
"Content Encoding Error
The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.'
This is what I did.
Open Firefox
1) in the address bar, type: about config 2) promise to be careful 3) type in the filter bar: encoding 4) double click on the value column of network.http.accept-encoding 5) change the 'string value' from "gzip, deflate" to "true" (I had to type that in.) I found that on another string that was closed that the moderator said not to do it or it could mess things up.
I do not know if issue was caused by last update as add or remove programs in control panel does not show Mozilla updates so I could not uninstall last udate. Only other thing I had done was reinstall Real Player Plus with Real downloader and Speed-bit accelerator as I was having trouble downloading flash videos from web pages mainly from Firefox. (Chrome in its wisdom playing god disabled the addon without even asking me so I could not use Chrome for downloads-they said something about not knowing publisher or certificate--"Real Networks"!!! maybe Google-Chrome does not want users of "You Tube which I think it owns to be able to download offf it with competitor or sort of competitor's applications.) I do not know that the Rel Player re-installation had anything to do with the Firefox error message-just contemporaneous in time as was the Firefox update that I only knew about as Firefox let me know I had to restart to finish installation of update.
After ten minutes after making changes re config it seems to be operating OK

After leaving my computer on all night with Chrome and Firefox both open but doing no downloading, etc., I noticed that Wincows Task Manager icon was all green showing 100% CPU usage. I opened Internet Explorer 8 which had been off all night. I looked at Windows Task Manager "processes". It shows firefox.exe with cpu at 86 to 95, iexplore.exe two instances, both at at 00-02, and chrome.exe (2 instances) both at 00. Realpaly.exe also left on all night after burning multiple Cds 6 hours earlier was also at zero. Nothing named speed bit had an active process, but videoacellerator.exe and VideoacceleratorService.exe both of which I allowed to stay in a startup folder were both at 00. Firefox is not downloading videos etc. It has two windows open, one at eBay and one support.mozilla on this issue(content encoding error). This all started occcurring after the latest Firefox update that necessitated the restarting of my computer. I have th two Firefox extensions that like T=Real Downloader allow downloads of flash videos on web pages and neither one was active Flash and Video Download, and Flash Video Downloader the former had been active for several continuous days downloading multiple video clips but had been turned off before I went to bed. After an hour typing this things are still the same with Firefox the CPU hog , still at 84-97, chrome.exe and iexplore.exe still both under 05. For some reason with the recent update tht required restarting the computer Firefox has become a CPU hog and is not working properly withprograms (Windows downloader and Speedbit) and has the content encoding error message issue as wll as sometimes IE not able to go to some pages. My CPU icon in taskbar is teill all green, and can't close firefox without a lot of hassle as that is what I am typing this on.., but I bet that when I do total CPU usage goes to 20 or so and system idle process is the only process with numbers over 80 for CPU.
Has anyone told a webpage manager that there is an encryption problem with their webpage (such as Google or Amazon) as the error message instructs us to do?

Adobe Media Encoder Error Compiling movie Unknown Error occurs within 1-2 minutes of Exporting

I've looked at a number of threads about this, and none seem to solve the issue. I am using the Mac version of PPRO CS6, with AVCHD h.264 source clips (mts) directly, and the timeline will play the program, but I did noticed that certain cuts the program video is still for that cut, but the encoding error does not fail in those cuts, so its puzzling. I've tried different output formats, and each will fail at a different point. There are only 4 video clips (all identical format and frame rate) in this, but I have 180 cuts from the 4 clips. There are no graphics, titles, effects, stills.. none of that - just straight cuts. Only a fade in the beginning and fade out at end I also will get the same error if I render the sequence (also at a different point, in the middle of a cut), with a same error. The total length of the edited sequence is 22 minutes, the source clips are well over 3GB each. So to convert to another format would take forever, so that's why its kept in original format. Anyone found a solution?

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Premiere CS4 Media Encoder AVIs and Encore Encoding Errors

For some reason, I'm having trouble creating DVD's in Encore from AVI's exported from Premiere CS4. When encoding starts, Encore immediately pops up with an "encoding error". I now, all of a sudden get this identical error on two of our systems.
Most of the time Encore works if I export an "MP2" file from the Premiere CS4 timeline.
Any of you guys having trouble with Encore CS4? To me it has been a lot more buggy and unreliable than any previous version. The program also seems sluggish on our Q6600 4gGB RAM computers! Kind of like the program is straining just to open its windows.
Another thing that is annoying. Earlier in the day, I exported a Flash Web video for a client's review. A few hours later I had to make a 1 hour and 46 minute DVD with chapters for a client that had to be Fed Ex'd overnight. It took forever to complete and I soon realized that Encore defaulted back to the last export...FLASH! cr@p. I would prefer that the program defaulted to standard DVD creation. After all it is Encore DVD.

I'm having major problems with Media Encoder CS4.
When I try to create an AVI file (for example) from a section of my Premiere Pro CS4 timeline, the encoder opens, takes forever to load the project, and then, after I hit start queue button, it again takes forever to load the project in the small window at the bottom of the display.
Finally the "waiting" message in the queue list turns to an orange exclamation mark with the message that encoder "could not read from the source. PLease check if it has been moved or deleted." Which of course it has not been. THis happens even if I preview the section in advance in Premiere. material.
If at any point I hit the settings button it simply reloads the project

Pro*C /AIX /11.1.0.X :demo programs return "duplicate symbol" warnings

this problem has been raised in SR 7229372.994.
Working in 11.1.0.6 or 11.1.0.7 on AIX , compilation of the proc*C "sample1" demo program returns various duplicate symbol warnings:
ld: 0711-224 WARNING: Duplicate symbol: p_xargc
ld: 0711-224 WARNING: Duplicate symbol: p_xargv
ld: 0711-224 WARNING: Duplicate symbol: p_xrcfg
ld: 0711-224 WARNING: Duplicate symbol: p_xrc
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
-this is true using all versions of the AIX xlc compiler 7,8,9 and is true for both 32bit and 64bit compilations. As far as I am aware this problem only occurs on AIX.
-using the -bloadmap linker option, customer reports the following duplicate symbol mappings:
ld: 0711-228 WARNING: Duplicate symbols were found while resolving symbols.
The following duplicates were found:
Symbol Source-File(Object) OR Import-File{Shared-object}
p_xargc crt0main.s(/lib/crt0.o) ** Duplicate ** {oravl01/oracle/11.1.0.7/lib32//libclntsh.so}
p_xargv crt0main.s(/lib/crt0.o) ** Duplicate ** {oravl01/oracle/11.1.0.7/lib32//libclntsh.so}
p_xrcfg crt0main.s(/lib/crt0.o) ** Duplicate ** {oravl01/oracle/11.1.0.7/lib32//libclntsh.so}
p_xrc crt0main.s(/lib/crt0.o) ** Duplicate ** {oravl01/oracle/11.1.0.7/lib32//libclntsh.so}
-which indicates that these various OS symbols have been included in linclntsh.so, which is puzzling and confusing.
-customer raising the issue is a VAR who's application is heavilly dependent on Pro*C code: they need more information as to why this behavior has changed from earlier releases and why these OS symbols
have apparently been included in Oracle libraries. It is not acceptable to this VAR to be told not to be concerned with duplicate symbol warnings or that they are "meaningless" : there is no such thing as meaningless at this VAR's level of engineering and QA. VAR needs a much more detailed explanation as to what is happening here.
-can someone provide more information about what has changed in 11g to result in these warnings, and why? I am unable to find any documentation on this matter.

Is any news from this error.
I really want to know how to fix this WARNING messages.
Im in
uname -aM
AIX "HOST" 1 6 "HEXA" IBM,9117-MMB
Pro*C/C++: Release 11.2.0.1.0 - Production on Mon Mar 19 12:43:07 2012
Thanks.

Problem about running oci demo program!

I execute a demo program under $oracle_home/rdbms/demo,get errors:
[oracle@lnx71 demo]$ ./cdemodsa
./cdemodsa: error while loading shared libraries: libclntsh.so.9.0: cannot open
[oracle@lnx71 demo]$
The environment is : gcc 2.95.3 ; kernel 2.40-8.
Can somebody tell me why?
Thanks a lot!

It sounds like your environment has not been setup properly. You might want to make sure that libclntsh.so.9.0 is in LD_LIBRARY_PATH. Other settings that need to be checked are mentioned in the demo makefile.
Hope that helps.

Beehive Online: How to Resolve Content Encoding Error or Invalid Login?

Hello,
These questions relate to the following Beehive Workspace:
Workspace: Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
Login: [email protected]
The Login "[email protected]" is a valid workspace member for the workspace: Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
. This login has been used successfully for about 6-months to exchange data between me and the user. On a recent login attempt the user gets the following error from FireFox:
Content Encoding Error: The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
A similar error is issued when using Chrome or Opera. IE comes back with an unable to reach server error.
What the user has told me is that she recently reset her password. Afterwards, the above error after the login screen.
A few other points that the user has told me that do not make too much sense to me. The user claims that the system gives an invalid "login" error when she uses the email address: "[email protected]". The user claims that the login that she needs to use is "[email protected]". However, the email that is registered is "[email protected]" on the page: https://beehiveonline.oracle.com/teamcollab/participants/Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
Any help on how I can get her email address "[email protected]" to work properly for the workspace Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
would be greatly appreciated.
Thanks in advance,
Pouya

Hi,
Her email "[email protected]" is the one she has to use or the content encoding error will be returned. It is an ugly erro but it means the user has a valid sso account but not a valid BeehiveOnline account - If she is using "[email protected]" then this is invalid and will generate the error.
There are 2 accounts in the wwldap system - one for each and I think the user has confused the account/password combinations - Nothing has chnaged on the system and the "[email protected]" account is still valid and active.
I checked the logs and she is using the wrong username and getting the 304 error returned:
access_log.1342612800: [email protected] [18/Jul/2012:13:05:31 -0600] 1 "GET /teamcollab/library/Oracle/Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace/Documents HTTP/1.1" 500 304 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:14.0) Gecko/20100101 Firefox/14.0.1"
Phil

Idvd encoding error

I purchased ilife'11 in order to get idvd. And I'm having encoding errors when trying to burn dvds. After trying just about everything suggested, I noticed that when idvd is opened I do not have use of the rop down menu. Don't seem to be supported..unable to update.

Hi
Few of us here are mind-readers
So if You only say that something is wrong - How do You thing we'll be able to guess what ?
There are zillions of things that can go awry.
• What material was used - Video Codecs, photo and audio file formats ?
• Edited in what video editing program - iMovie (version), FinalCut (version) or Adobe Premiere ?
• How was it imported into iDVD ?
• Was there any Error Messages - What did it/they say ?
• Where in the process did it go wrong
• Brand of DVD used
• Type of DVD used
• Burn Speed - set to ?
and much much more need to be told - to set us up on track on where the culprit is.
Yours Bengt W

Encode error while transcoding in CS5

I keep getting a Encode error while attempting to transcode in CS5. I have a 720p 59.94 fps mpeg 2 file in which i am building a dvd project and outputting to a 8.5 gig folder. I am running W7, i have set all adobe programs to "run as administrator". Before building, i run the check project function and all is ok.
I can transcode in Adobe Media Encoder just fine, but i prefer to transcode within Encore while building my project.
I demux the files before importing into Encore. I was able to transcode successfully this file while building a project with no menus. But, i imported a seperate file with the same properties, and attempted to transcode and build another project with no menus and i get the "Encode" error.
Not sure what else i can do. In my particular case, i get better results when i transcode within Encore rather than using Adobe Media Encoder.
Any help would be appreciated.
thanks

The error i get is "Encode error". It always happens
when transcoding begins. I tried transcoding before the build and i get the same error.
I am not using premiere so Dynamic link is not applicable in this case.
My file path name is short, but has a few spaces between the letters.
I have to import the assets as a seperate video and audio file. That is what i meant by demuxing. This is why i prefer to transcode within Encore because it will keep my 5.1 channel sound. If i transcode within Adobe Media Encoder, it is converted to 2 channel .

Keep getting encoding errors !! What to use instead of iDVD ?

Have read many posts about encoding errors with iDVD. I get them now, no matter what movie file (.mov, mp4, etc.) is used. Tried to save as an image, TS folder, etc. and always get an encoding error. Could never get to burning. Wasted many hours.
Which alternate program is as effective and easy as iDVD ?

iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Xml Demo programs cann't work

After tar the download file, I try to run the demo program.It
refuse to work.The error message as:
XML C Full DOM test
Initializing XML parser ...
Failed to initializ XML parser,error 201
I try it on Solaris and Linux, the messages are the same.
Whould you give me any suggestion?
Thank you

this is for Oracle XDK(XML Developers' Kit) for C 9.0.1.0.0
After tar the download file, I try to run the demo program.It
refuse to work.The error message as:
XML C Full DOM test
Initializing XML parser ...
Failed to initializ XML parser,error 201
I try it on Solaris and Linux, the messages are the same.
Whould you give me any suggestion?
Thank you

Toshiba 32AV933G: unsupported media error caused by subtitles

Hello.
I am having some trouble with this media player of my toshiba bedroom tv.
More specific sometimes while the media plays at some time the audio stops, after a few seconds the tv becomes unresponsive while playing only the video and finally it gets me back to the video folder with an `unsupported media`error.
After a lot of troubleshooting _i finally came to the solution._
_The problem is caused by the subtitles._
I am in greece so for sure this happens with greek subs.
If for example the subs have a line and the line starts with( ( i ) * that is bold subtitle) this problem will occur.
If i remove the bold from the subs there is no problem at all.
Obviously bold etc is not supported.
I think this could be easilly fixed via a firmware upgrade.
*i have put ( i ) which is not the correct form because the correct one that starts and ends with < is not shown in the message:)

Yes of course. Without utf-8 the srt doesnt work at all with greek language.
However the problem remains.
As i said tried a lot of things. First of all i thought it was the video encode etc.
*Finally i came to the solution.*
If in the text file of the subs(srt) there are special tags in the beginning of the line like the ones i wrote before the video doesnt work ok.
If i delete this special tags using a text editor it is working ok.
Surely there is a problem with <i)> tag that is i think for potitioning the subs.
Of course i can spent one minute to fix every sub file, it is not difficult.
But i dont think its a problem that cant be solved easily with a firmware upgrade..
Ps after further testing the <i)> flag in front of a line and </i)> in the end makes the player to stop playing the video. The bold flags <b)> and </b)> dont make the video to halt.
However the subs dont display correct for about one minute after the bolded sub.
If they could just make a firmware that completely ignores these flags i think it would solve the problem..

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

Runtime Error in MMBE- s yntax error occurred in program "SAPLMBBS " in inc

Hi Gurus,
Runtime Error in "MMBE" Transaction -
The following syntax error occurred in program "SAPLMBBS " in include "LMBBSU07
" in
line 76:
"The column name "MATNR" has two meanings . ."
Any Input is Highly appreciated.
Thanks and Regards,
Selva

Hi,
This looks like an ABAP runtime error and the program concerned is a standard program. Please check the include and try debugging, suggest a breakpoint in line 76.
Thanks

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
Process:         Adobe Premiere Pro CC 2014
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type: X86-64 (Native)
Parent Process: launchd [2538]
Responsible:     Adobe Premiere Pro CC 2014
Date/Time: 2015-01-06 14:04:23.500 -0700
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 55 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Customer created test export with 777 permissions and set mount parameters to the following:
mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
-- Original mount options:
     General mount flags: 0x40 async
     NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
-- Current mount parameters:
     General mount flags: 0x4000058 async,nodev,nosuid multilabel
     NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
479         V3 CREATE Reply (Call In 478)
484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster. Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Unsupport encoding error in demo program

Similar Messages

Maybe you are looking for