Vbox properties created at Design Time vs Runtime

So I am familar with the Vbox property horizontalAlign and I would typically set it to center when I create one at design time. Now I am create componets at runtime and want to align all the Vbox children(or componets in the Vbox) so that they are centered, but there is no property horizontalAlign to set. So my question is, one how can I make sure all my Vbox componets are centered and two, will I run into this type of thing with all the componets.

ah, that makes sense. Thanks.
Is there a way to determine what is a style vs a direct property? -- with logical sytax of sometype?

Similar Messages

Design time and Runtime licenses

We are planning to use the Compact RIO for industrial process control and logging of values for furthur analysis.
As we are new to the NI products, would like to know, what kind of licenses will be required for this purpose, like design time and run time licenses. The system end-user is not interested in having a development license at his end.
Is it possible to have only the run-time licenses at the user end?
Any help would be appreciated.
Thanks in advance...

EventTrigger wrote:
We are planning to use the Compact RIO for industrial process control and logging of values for furthur analysis.
As
we are new to the NI products, would like to know, what kind of
licenses will be required for this purpose, like design time and run
time licenses. The system end-user is not interested in having a
development license at his end.
Is it possible to have only the run-time licenses at the user end?
Any help would be appreciated.
Thanks in advance...
Obviously you will need the LabVIEW development environment and
according Extensions to develop the software. So this means you will
need the LabVIEW development system and either the RealTime Extension
or the FPGA Extension or both, depending how you will setup your
applicationon the CompactRIO system.
For your end user
you would not need any specific runtime licenses as long as you use NI
hardware, since the cRIO controller comes with the necessary runtime
license already for the realtime OS on the controller and the cRIO
backplane comes with the runtime license for the FPGA code.
LabVIEW
build applications in itself do also not need a seperate runtime
license since the development system license gives you the right to
distriibute your host application with the LabVIEW runtime engine. This
would get different if you use any of the Toolkits such as Vision
Development, Sound and Vibration, Datalogging, Supervisor and Control
or similar which do all have their ownruntime license that needs to be
purchased for every deployed application that makes use of their
functionality.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Difference between Design Time and Runtime

Hi all, very nice to be here sharing knowledge with each other.
I wanna share my practical experince knowledge that is ,
Almost all the properties that can be set at the Design time for any object can also be set at the Run-time using only
GET_object_PROPERTY and SET_object_PROPERTY.
In fact, I have posted the same info on some othr place, too.
Thanx.

Hi all, very nice to be here sharing knowledge with each other.
I wanna share my practical experince knowledge that is ,
Almost all the properties that can be set at the Design time for any object can also be set at the Run-time using only
GET_object_PROPERTY and SET_object_PROPERTY.
In fact, I have posted the same info on some othr place, too.
Thanx.

Customize Presentation at design time or runtime

I have a single time dimension but want to show a crosstab formatted using years by 12 months accross:
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2001
2002
2003
2004
2005
The only options I can think of is A)Create a custom presentation for each year and have 5 bibean instances in my uix page OR B)Create a Servlet Application (UIX) and customize the servlet using the OLAP API? C)Create a custom cube/dimensions in the analytic workspace.
What do you think.

This is an interesting case and something we have been trying to resolve with a future release of BI Beans. My personal perference would be to create custom cube with an additional YEAR and MONTH dimensions to allow you to create the required layout. The cube could use a formula to QDR data from the original source cubes so the data would not need to be replicated (assuming you are using an AW - if you are using a ROLAP implementation this could be done using a view). This does not require any change to the application logic and allows yout use all the BI Beans functionality.
Hope this helps
Business Intelligence Beans Product Management Team
oracle Corporation

How can I make non-inspectable component properties persist from design to runtime?

Hey,
I have two components (lets call them A and B) which have normal inspectable properties (e.g. NAME and AGE) which allow you to enter values via the component inspector. When I type the value for NAME in component B (via the component inspector) I communicate via a singleton class and store this value in a NON INSPECTABLE property located in component A.
When I run the movie, I want to access this non inspectable property within component A; however, it is always null - the value will not persist from design time to runtime. I check that the value is set at design time by tracing the A's non inspectable property once component B has set it - and it does indeed work, so I know component B has managed to set the correct value in A.
Basically, what I need to know is, how do you persist properties of a component from design to runtime, without having to make properties inspectable and having to manually type property values via the component inspector?
Many thanks

Hi
I would think <componentInstanceOfB>.NAME would give you the current value of NAME in the component B. This can be accessed by any component (say A), when A knows the instance name of the component on the stage. So probably all you need to know is tell the instanceOfA the name of instace of B and then instanceOfA can access the value as <instanceOfB>.NAME.
Hope this helps.
Cheers
Karthik

SLD Design Time vs SLD Runtime

Can anyone let me know the difference between SLD Design time and SLD Runtime?

Hi,
Below Blog explains SLD at design time and runtime
SLD: General recommendation how to set up the system landscape directory
Below two PDFs gives you in-depth details about SLD.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
Below is some info which will be useful for you...
Design, Configuration, and Runtime
The implementation of a collaborative process [Seite 10] is split into three phases:
u2022 During the design phase, you document the entire collaborative process and determine
which interfaces are required. You can either define new system-independent
interfaces to implement at a later point in time (outside-in development) or work with
functions that already exist in the systems (inside-out development). In this phase you
design the logical collaborative process by describing in a specific role the message
exchange between the application components. This description is still not specific to
any particular installed system (see also: Design Time [Seite 4]).
u2022 During the configuration phase, you configure your collaborative process for a specific
system landscape. For example, you define conditions for the message flow and select
design objects that meet your requirements. (See also: Configuration Time [Seite 6])
u2022 The configuration data is evaluated at runtime and controls communication. You can
monitor the message flow by using a central monitoring.
This three-stage process is reflected in the architecture:
Design time and configuration time each have a central data storage point providing an
overview of all data that is relevant to the cross-component process: the Integration
Repository and the Integration Directory respectively. To edit this data, you use a single
tool, the Integration Builder. The content of the Integration Repository and Integration
Directory is known as collaboration knowledge.
u2022 The Integration Server is the central u2018distribution engineu2019 for messages [Seite 14] at
runtime. All systems that use the Integration Server to communicate with each other
use this server to exchange messages. These systems are referred to as business
systems at a logical level; within a specific system landscape they are called technical
systems or communication parties. Using the configuration data from the Integration
Directory, the Integration Server decides to which receiver or receivers it must send the
message and whether a mapping needs to be executed beforehand.
for more info refer to the below PDF from Page Nos 6 to 9...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/627d1cbc-0601-0010-aea2-c275521673f2
Regards,
Srinivas.
Edited by: srinivas sistu on Aug 4, 2008 12:38 PM

Design Time and Dynamically Created Controls

I have a project written in VC6 as an MFC Dialog Box project. In a particular box, I dynamically create several (exact number depends on user entry) CNiGraphs. There are also a two CNiButtons that were created at design time using the resource editor. The problem I'm having is that when this dialog box is opened, a message pops up saying it's an eval version and the control will go inactive after 5 minutes. After waiting 5 minutes, the 2 CNiButtons go inactive (turn black), but the CNiGraphs continue to run. I have a valid licensed version of MStudio 8.1.6, but it appears that these 2 buttons don't recognize the license. There are also other design-time buttons in the project but those one's don't have a problem at all. When creating the dynamically creating the CNiGraphs I give them a valid license string, and I was wondering if there is a problem with having design time created and dynamically created controls in the same dialog box. Does anyone know?
I can't remember, but I may have created those 2 CNiButtons when I was only using an eval license. (All the other were definitely create when I had a full license) Could that be affecting them? I seem to have a vague recollection of reading somewhere that design-time create controls check the license when they are created in the designer and store that license info in them. If that's the case does anyone know an easy way to update the license stored in the control? I'd rather not just delete it and re-add it as I'd like to avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the tab order instead of having to click through all the controls in the correct order?)
Also, I'm not sure if this would affect anything, but the project was originally built with ComponentWorks 1.0, but we were forced to move to MStudio when we encountered some bugs in CW, so all the controls were originally CW Controls that have been converted to CNi Controls. I doubt this is it though as everywhere else we changed over the controls don't have a problem, but I'm willing to try suggestions.
Solved!
Go to Solution.

Hi JC,
I hope you had a good weekend! I am glad to hear you are back up and running. Adding the extra button was, in fact, what caused the updating of the license information for the other buttons, as you suspected. After doing further research, I have found that the license information is stored wtihin the form for the control, and unless that control changes in any way (or in your case adding a new one to the project), it does not see any reason upon compiling to relink the license. However, after changing the control and recompiling, it updates the linking of the license information, which resolved this issue in your case.
I hope this helps, JC. Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

A Table that was created at Run time. A Row Properly Deleted from Table Is Still Present on Form with BindingNavigator

Hello
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable' table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable" & vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still shwoing after deleting it with my NonQuery
Please Help!

Hi genterprise,
>> Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
In my option, if you want to rebind the users table to the navigator, you need to set the BindingNavigator.BindingSource. Based on your description, it seems that you did not reset the datasoure of the MyMainDBBindingNavigator. It was the original datasource
of the masterUserTable. For more details about BindingNavigator.BindingSource Property. You could refer the link below:
# BindingNavigator.BindingSource Property
https://msdn.microsoft.com/en-us/library/system.windows.forms.bindingnavigator.bindingsource%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How to create a drop down box values on design time?

Hello,
I have a drop down box that I would like to edit on design time to have the valus 1 to 10.
Is it possible to doo it on design it or do I have to create a loop in the code to do that?

See go to LocalDictionary->Data Type-> SimpleType Right Click and create a Simple Type giving some Package Name
Once u have created
There u will see Enumeration Tab and give Key Value Pairs by pressing New Button
Now Create a Context Attr and at Type property select that three dots
Then go to Dictionary Simple Type and select the Package u have given
then select the Simple type u have created
Then assign the context Attr to the UI Element
Message was edited by: krish kanth

Visual studio lightswitch takes very long time (hangs for 20 sec) when changing entities properties in screen design

hi, I have lightswitch project that is growing up every day. Now it has 200 database table and about 450 default screens. When I first started the lightswitch project with few tables
(about 50 tables), it responses very fast. Gradually when I created the screens, the response takes 10 seconds for any changes I made in the screens or on the tables (*.lsml). Now, it takes 20 seconds (-+2 sec) to be able to do the next change!. For example,
changing the group name, entity input type, width, table summary property ,arrange fields in the groups, change display name (which I change the most),,etc. Just imaging that I can change 3 things on a minute! I am using lightswitch with VB coding , but no
programing codes (yet), I uses only HTML screens, no extensions, connected with SQL express 2012 (but I think that has nothing to do with the slowness since the problem is on the screens design time), I have created the project from scratch three times, with
visual studio 2013 ultimate update 3, update 4, and now with Update 5 CTP 1 !! Yet, the same result. Strange that the freezing time is always about 20 seconds!! Any idea why this is happening? Any resolution?! Regards, Hasan

Hi Michael
again i appreciate your answer ...
i was trying to implement your suggested workaround of my problem, unfortunately, it won't work with me ! i cannot split the
project to smaller modules because of:
all screens are connected to each other's with buttons and clicks (view selected)
i have changed all the "display names" of tables fields (translation). i would have problem in translation whenever i
need to add tables or fields in the database, then i need to repeat that for all modules. i know that i can use other translation method, but i have already translated thousands of words !
i have spent 2 months in 2013 to learn MVC, but i did not like it. it is somehow complex for me. i am a volunteer developer (actually i
am network designer ).
i may lose the authentication , as i need to log-in to each module separately.
is there any root solution to this problem ; the VS Lightswitch (or IDE) slowness when there
is a lot of screens? maybe in VS2015?
i had great hopes for the lightswitch, and still it is the only IDE that i can use for the "Charity
ERP" project.
regards,
Hasan

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

Does changing report connection at runtime require the same user/pwd used at design time?

I've recently integrated Crystal 13 into a web service to provide HTML reports served up within our web application. Sometimes reports would work and other times they would fail when attempting to connect to the database. The ConnectionInfo associated with the tables referenced in the reports bore the account info used at design time (in the Crystal IDE), what ever connection was set as the Datasource Location, this would include the server name, database name, and other attributes of the connection.
I found that any changes I make to table, sub-report connection info have no affect unless the UserID and Password match the UserID and Password saved with the report during design time. While generally searching online, I came across several references to this being and issue or suggestion when database connection problems dynamically running reports.
If this is by design?
How would I support customers who want to use my reports, but also require that they manage the db access accounts?
Thanks,
Jeff

Hi Brian, thanks for the response.
It does make sense that subreports would not necessarily be constrained to the same connection as the container report, and the designer would not persist a password for any stored connection.
I'm on Windows 7 and up, Crystal 13 runtime, C# web service, sql 2008 r2 and up (native client).
After loading the report source, I call ReportDocument.SetDatabaseLogon to set userId, password, serverName, and databaseName pulled from web.config. I then pass the connection info and the ReportDocument to a recursive call that applies the connection info to each table in the report and each table in any subreport.
Based on your description, it sounds like I may be missing, and require, the SetDatabaseLogon call on each subreport (ReportDocument).
This seems to ring true and I think coincides with your description. Would you agree?
Thanks,
Jeff

GP Design Time - what is the purpose of 'Create Object View' option?

We are running EP 7.01. When I am in the GP Design Time, and I click on the 'Create Object View' link, I receive the following error:
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.caf.eu.gp.ui.bo.VCreateBasicData.wdDoInit(VCreateBasicData.java:103)
    at com.sap.caf.eu.gp.ui.bo.wdp.InternalVCreateBasicData.wdDoInit(InternalVCreateBasicData.java:159)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
    ... 55 more
What is the purpose of the 'Create Object View' option? I cannot find it in the documentation.

Hi Karen,
The Object Types are used to define the Parameters for the Callable Objects. We Can create the Object Views for the CAF Core Entity services or UME Pricipal Objects such as Users,Roles Groups etc. While creating the Object View we can select either of these and then we can create a view i..e. Select the required attributes from those Business Objects i.e. Entity Services or the Principals. Once we create the Object View, we can use them to define the Parameters for the callable Objects. While defining the parameters for Callable Objects, if you click the dropdown for 'Type', you'll see an entry 'Reference to BO'. If you select the entry, you'll see the list of Object Views you have created and you can select the Object View you want for defining that parameter. In short it means that you can create the Obect Views for the BOs i.e. CAF core Entity services and Pricipals. And then you can define the parameters for the Callable Objects with type 'Refence to BO' pointing to your object views.
[further Info|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/051d496d9c5922e10000000a155369/frameset.htm]
[Some more Info|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/051d496d9c5922e10000000a155369/frameset.htm]
Regards,
Ajay

When is String literal pool created compile time or runtime?

When is String literal pool created compile time or runtime?

I have replied to your question in the other thread related to the string pool:
http://forum.java.sun.com/thread.jsp?forum=31&thread=276893
Pierre

URGENT: Creating LIST item during design time.

Hi All,
Is it possible to create LIST item [with MultiSelect option] during design time. The Developer guide has only programmatic implementation. So, Please let me know, whether its possible or not.
Thanks.

Yes, it has to be done programatically only. There is no property in the Property pallet to do this declaratively as of now.

Vbox properties created at Design Time vs Runtime

Similar Messages

Maybe you are looking for