Web Dispatcher Versions
I currently have 2 web dispatchers that are NW 701. All of my systems that we are looking to use web dispatcher(s) with are also NW701. I can't seem to find a PAM entry for web dispatcher. Is their any version requirements around web dispatcher and systems they connect to? I saw a sme article about web dispatcher 7.2 and using it with multiple network aliases to redirect users to multiple hosts. I.e. one webdispatcher could service both ECC and portal hosts. I believe to do the samething in web dispatcher 701 you have to use url prefixes, or run multiple web dispatchers.
Is Web dispatcher a case where it always makes sense to get the newest version when implementing? Or does it need to match the systems you connect to?
Thanks, Pat
Hi Olivier,
I aam trying to upgrade Web Dispatcher from 701 to 7.20 on Windows box. I downloaded the file "sapwebdisp_73-10007272.sar" from the marketplace. When I unpacked this SAR file it created "servicehttp" folder also I found "wdispadmin.SAR" I also unpacked this file then it created a folder called "admin". In the admin I found 4 folders called, icp, public, publicicp and publicincl.
Instead of icmadm.sar now it is only "wdispadmin.SAR".
Now I started the Web Dispatcher but the webadmin UI does not work correctly. Like I cannot put the web dispatcher in the maintenance mode, I cannot see this screen there is an error called
"unhandled exceptions: "
"ICP_StructValue: illegal struct reference: icm_info.uptime"
"ICP_StructValue: illegal struct reference: icm_serv_info.aclfile"
"ICP_StructValue: illegal struct reference: icm_user_info.locked"
"ICP_Value: Illegal type: 7"
I checked for any related notes, I found 1484856. In the note it said
The follwoing ICP files are not delivered in wdispadmin.sar.
- wdisp_add_system.icp
- icpdef.inc
Therefore the ICM/Webdispatcher Admin UI does not work correctly.
When I clicked the download it takes me to the page called "NO DATA AVAILABLE".
Did you have any of this errors? Meanwhile I have opened an ticket with SAP for this.
Please let me know if you have come across this error.
Thanks in Advance
Ramesh.
Similar Messages
-
Web Dispatcher configured but not working
Hi,
We wish to configure SAP Web Dispatcher as a reverse proxy. For this we've installed using sapinst SAP Web Dispatcher Version 7.00.11, multithreaded, ASCII, 64 BIT Patch Level 140 which was manally updated to SAP Web Dispatcher Version 7.10.1, multithreaded, ASCII, 64 BIT Patch Level 152.
The SAP Web Dispatcher server is in DMZ whereas the Enterprise Portal servers are in the intranet.
The updated SAP Web Dispatcher is available in /sapmnt/<SID>/exe and not in a seperate directory (/usr/sap/<SID>/sapwebdisp) as per SAP note 908097. The SAP Web Dispatcher has been installed on a standalone machine with instance number 00.
I've configured the Sap Web dispatcher with the -bootstrap option. The -checkconfig option completes with 0 warning 0 errors.
The TCP ports between SAP Web Dispatcher and Enterprise Portal servers are opened in the firewall. Also, required ports 22 & 8100 are opened from my computer to the SAP Web Dispatcher Server.
Yet when I try to connect to the administrator interface with the URL http://<Web_Disp_IP>:8100/sap/wdisp/admin/default.html, I receive the following text on the browser:
Network Error (tcp_error)
A communication error occurred: "Operation timed out"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
Similar message is received even if the SAP Web Dispatcher is installed in a seperate directory.
Has anyone come across a similar issue?
Thanks.
Regards.
SAP Web Dispatcher Profile generated by bootstrap
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 00
add default directory settings
DIR_EXECUTABLE = .
DIR_INSTANCE = .
Accessibility of Message Servers
rdisp/mshost = <EP_CI_IP_address>
ms/http_port = 8104
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 25
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8100
icm/server_port_1 =
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt,PORT=8100
WebDisp:wdpadm 16> sapwebdisp pf=sapwebdisp.pfl -checkconfig
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 8192
Server info will be retrieved from host: <EP_CI_IP_address>:8104 with protocol: http
Checking connection to message server...OK
Retrieving server info from message server...OK
Message Server instance list:
------++--
+
instance name
hostname
HTTP port
HTTPS port
------++--
+
J2EE37031000
sappqxx03
50300
50301
J2EE53924900
sappqxx05
50500
50501
------++--
+
Checking ABAP servers with URL "/sap/public/icman/ping":
no server group "!DIAG" defined
Checking J2EE servers with URL "/index.html":
Checking J2EE server sappqxx03:50300...OK
Checking J2EE server sappqxx05:50500...OK
Web Dispatcher configuration for J2EE only system: No server group !DIAG defined
On double stack systems, configure Web Dispatcher to accessMessage Server of SAP Web AS ABAP
Check ended with 0 errors, 0 warningsHi,
We wish to configure SAP Web Dispatcher (WDP) as a reverse proxy. For this we've installed using sapinst SAP Web Dispatcher Version 7.00.11, multithreaded, ASCII, 64 BIT Patch Level 140 which was manally updated to Version 7.10.1, multithreaded, ASCII, 64 BIT Patch Level 152.
The SAP WDP server is in DMZ whereas the Enterprise Portal servers are in the intranet.
The updated SAP WDP is available in /sapmnt/<SID>/exe and not in a seperate directory (/usr/sap/<SID>/sapwebdisp) as per SAP note 908097. The SAP WDP has been installed on a standalone machine with instance number 00.
I've configured the Sap WDP with the -bootstrap option. The -checkconfig option completes with 0 warning 0 errors.
The TCP ports between SAP WDP and Enterprise Portal 7.0 SP14 servers are opened in the firewall confirmed as per note 552286. Also, required ports 22 & 8100 are opened from my computer to the SAP WDP Server.
Yet when I try to connect to the administrator interface with the URL http://<Web_Disp_IP>:8100/sap/wdisp/admin/default.html, I receive the following text on the browser:
Network Error (tcp_error)
A communication error occurred: "Operation timed out"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
Similar message is received even if the SAP WDP is installed in a seperate directory.
Has anyone come across a similar issue?
Thanks.
Regards.
SAP Web Dispatcher Profile generated by bootstrap
SAPSYSTEM = 00
DIR_EXECUTABLE = .
DIR_INSTANCE = .
rdisp/mshost = <EP_CI_IP_address>
ms/http_port = 8104
wdisp/auto_refresh = 25
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
icm/server_port_0 = PROT=HTTP,PORT=8100
icm/server_port_1 =
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt,PORT=8100
Brief output of checkconfig
Maximum number of sockets supported on this host 8192
Server info will be retrieved from host EPHostIPAddres 8104 protocol http
Checking J2EE server sappqxx03:50300...OK
Checking J2EE server sappqxx05:50500...OK
Web Dispatcher configuration for J2EE only system: No server group DIAG defined
Check ended with 0 errors, 0 warnings -
Web Dispatcher - abort with a core
Hello all,
i have install a Web Dispatcher Version 7.00.7 for load balancing of a portal withe Central Instance and a Dialog Instance.
The Web Dispacther is coming up without problems. After nearly one day - the Web Dispatcher is down. In the share /usr/sap/W26/W00/work i found alwasy a core.
Have you an idea?
dev_webdisp:
trc file: "dev_webdisp", trc level: 1, release: "700"
sysno 00
sid W26
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 49
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 3903658
[Thr 01] Fri Jan 19 14:08:40 2007
[Thr 01] *** WARNING => maximum number of sockets supported on this
host (8195) less than parameter icm/max_sockets (16384) [icxxrout_mt. 2737]
[Thr 01] started security log to file dev_icm_sec
[Thr 01] SAP Web Dispatcher running on: rcjus049.cja.roche.com
[Thr 01] MtxInit: 30001 0 2
[Thr 01] IcmInit: listening to admin port: 64999
[Thr 01] WARNING: MPI Pipe 2 still in use 0 0 1 1
[Thr 01] WARNING: MPI Pipe 0 still in use 0 0 1 1
[Thr 515] *** WARNING => HttpPlugInInit: Parameter icm/trust_client_with_issuer or icm/trust_client_with_subject not set => do not trust any intermediary
X.509 cert data will be removed from header [http_plgrt_m 670]
[Thr 515] HttpSubHandlerAdd: Added handler HttpRedirectHandler(slot=0, flags=4098) for /:0
[Thr 515] HttpExtractArchive: files from archive /usr/sap/W26/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/W26/data/icmanroot are up to date
[Thr 515] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
[Thr 515] CsiInit(): Initializing the Content Scan Interface
[Thr 515] IBM RS/6000 with AIX (mt,ascii,SAP_CHAR/size_t/void* = 8/64/64)
[Thr 515] CsiInit(): CSA_LIB = "/usr/sap/W26/SYS/exe/run/libsapcsa.o"
[Thr 515] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
[Thr 515] HttpSubHandlerAdd: Added handler HttpWebDispHandler(slot=3, flags=28677) for /:0
[Thr 515] Started service 8100 for protocol HTTP on host "rcjus049.cja.roche.com"(on all adapters) (processing timeout=1200, keep_alive_timeout=30)
[Thr 01] IcmCreateWorkerThreads: created worker thread 0
[Thr 01] IcmCreateWorkerThreads: created worker thread 1
[Thr 01] IcmCreateWorkerThreads: created worker thread 99
[Thr 26473] IcmWatchDogThread: watchdog started
[Thr 12595] Sun Jan 21 17:05:04 2007
[Thr 12595] *** ERROR => NiPConnect: SiConnect failed for hdl 8 / sock 12
(SI_ECONN_REFUSE; I4; ST; 194.147.45.40:8142) [nixxi.cpp 2454]
[Thr 12595] *** ERROR => Connection request from (-1/65535/0) to host: rcjus049.cja.roche.com, service: 8142 failed (NIECONN_REFUSED) [icxxconn_mt.
c 2731]
[Thr 12595] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 12595] *** ERROR => Could not connect to SAP Message Server at rcjus049.cja.roche.com. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2269]
[Thr 12595] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2270]
[Thr 12595] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2271]
[Thr 12852] Sun Jan 21 17:07:04 2007
[Thr 12852] *** ERROR => NiPConnect: SiConnect failed for hdl 8 / sock 12
(SI_ECONN_REFUSE; I4; ST; 194.147.45.40:8142) [nixxi.cpp 2454]
[Thr 12852] *** ERROR => Connection request from (-1/65535/0) to host: rcjus049.cja.roche.com, service: 8142 failed (NIECONN_REFUSED) [icxxconn_mt.
c 2731]
[Thr 12852] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 12852] *** ERROR => Could not connect to SAP Message Server at rcjus049.cja.roche.com. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2269]
[Thr 12852] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2270]
[Thr 12852] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2271]
[Thr 13109] Sun Jan 21 17:09:04 2007
[Thr 13109] *** ERROR => NiPConnect: SiConnect failed for hdl 8 / sock 12
(SI_ECONN_REFUSE; I4; ST; 194.147.45.40:8142) [nixxi.cpp 2454]
[Thr 13109] *** ERROR => Connection request from (-1/65535/0) to host: rcjus049.cja.roche.com, service: 8142 failed (NIECONN_REFUSED) [icxxconn_mt.
c 2731]
[Thr 13109] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 13109] *** ERROR => Could not connect to SAP Message Server at rcjus049.cja.roche.com. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2269]
[Thr 13109] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2270]
[Thr 13109] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2271]
[Thr 13366] Sun Jan 21 17:11:04 2007
[Thr 13366] *** ERROR => NiPConnect: SiConnect failed for hdl 8 / sock 12
(SI_ECONN_REFUSE; I4; ST; 194.147.45.40:8142) [nixxi.cpp 2454]
[Thr 13366] *** ERROR => Connection request from (-1/65535/0) to host: rcjus049.cja.roche.com, service: 8142 failed (NIECONN_REFUSED) [icxxconn_mt.
c 2731]
[Thr 13366] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 13366] *** ERROR => Could not connect to SAP Message Server at rcjus049.cja.roche.com. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2269]
[Thr 13366] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2270]
[Thr 13366] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2271]
[Thr 13623] Sun Jan 21 17:13:04 2007
[Thr 13623] *** ERROR => NiPConnect: SiConnect failed for hdl 8 / sock 12
(SI_ECONN_REFUSE; I4; ST; 194.147.45.40:8142) [nixxi.cpp 2454]
[Thr 13623] *** ERROR => Connection request from (-1/65535/0) to host: rcjus049.cja.roche.com, service: 8142 failed (NIECONN_REFUSED) [icxxconn_mt.
c 2731]
[Thr 13623] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 13623] *** ERROR => Could not connect to SAP Message Server at rcjus049.cja.roche.com. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2269]
[Thr 13623] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2270]
[Thr 13623] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2271]
[Thr 13366] Mon Jan 22 12:20:39 2007
[Thr 13366] *** ERROR => PlugInHandleNetData: server: premature EOS (0/0) in request [http_plgrt_m 1927]
[Thr 14651] Mon Jan 22 12:20:57 2007
[Thr 14651] *** ERROR => illegal request version [http_plgrt_mt.c 4596]
[Thr 14651] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 14908] Mon Jan 22 12:20:58 2007
[Thr 14908] *** ERROR => Error in HTTP Request: 9 [http_plgrt_mt.c 4538]
[Thr 14908] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 15679] *** ERROR => Error in HTTP Request: 9 [http_plgrt_mt.c 4538]
[Thr 15679] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 15936] *** ERROR => illegal path specified [http_plgrt_mt.c 3743]
[Thr 16193] *** ERROR => host headerfield not set for HTTP/1.1 [http_plgrt_mt.c 4644]
[Thr 16193] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 17735] Mon Jan 22 12:20:59 2007
[Thr 17735] *** ERROR => illegal path specified [http_plgrt_mt.c 3743]
[Thr 18249] Mon Jan 22 12:21:00 2007
[Thr 18249] *** ERROR => illegal request version [http_plgrt_mt.c 4596]
[Thr 18249] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 18506] *** ERROR => illegal request version [http_plgrt_mt.c 4596]
[Thr 18506] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
[Thr 19020] *** ERROR => Error in HTTP Request: 9 [http_plgrt_mt.c 4538]
[Thr 19020] *** ERROR => PlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2136]
Thank you!!!Mate,
Just found one note for you. Please chk it
https://websmp105.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=824554&_NLANG=E
Its related to the error u got in logs
Cheers
Arun -
Patching Web Dispatcher?
Hi,
Web dispatcher download/installation (importing?) info at
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/6bf41aca84425196bd358df965fe3e/frameset.htm
is misleading, it lists SAPWEBDISP_<PL>.SAR as the latest Web dispatcher version, and mentions that DW_<PL>.SAR naming was used for older versions.
On the https://service.sap.com/patches sapwebdisp_0-20000961.SAR (patch level = 73) is older than dw_88-20000961.SAR (patch level = 87, not 88).
In order to patch older version of Web Dispatcher do I need to uninstall older version, and if so does uninstalling means deleting Web dispatcher directory?
Thanks!
RobYes it was,
Here is the version output from DW_88-20000961.SAR package:
W:\>D:\SAPInstall\WebDispatcher\sapwebdisp.exe -v
SAP Web Dispatcher Version 7.00.9, multithreaded, ASCII, 32 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compile time = Dec 11 2006 20:33:13
update level = 0
patch number = 87
source id = 0.088
supported environment
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
patch comments
( 0) ( 0.001) Provide option to preserve Unicode chars in HTML Escape (note 832220)
( 1) ( 0.004) CST patch collection 15 2005 (note 834501)
( 2) ( 0.007) CST patch collection 21 2005 (note 845887)
( 3) ( 0.011) CST patch collection 24 2005 (note 851195)
( 4) ( 0.011) VM Patch Collection 2 (note 853183)
( 5) ( 0.014) CST Patch Collection 28 2005 (note 860319)
( 6) ( 0.014) CST Patch Collection 28 2005 (note 860319)
( 7) ( 0.018) CST Patch Collection 31 2005 (note 867690)
( 8) ( 0.020) Optimization of VMC session storage (note 871988)
( 9) ( 0.021) Enhanced SAP encoding methods (note 866020)
( 10) ( 0.023) CST Patch Collection 36 2005 (note 874665)
( 11) ( 0.023) CST Patch Collection 37 2005 (note 877058)
( 12) ( 0.023) VMC Patch Collection 6 (note 865932)
( 13) ( 0.026) CST Patch Collection 39 2005 (note 884266)
( 14) ( 0.030) CST Patch Collection 41 2005 (note 888245)
( 15) ( 0.033) CST Patch Collection 45 2005 (note 895230)
( 16) ( 0.034) ICM Patch Collection (V) (note 851852)
( 17) ( 0.036) CST Patch Collection 49 2005 (note 904777)
( 18) ( 0.041) CST Patch Collection 1 2006 (note 913187)
( 19) ( 0.046) CST Patch Collection 06 2006 (note 921223)
( 20) ( 0.047) CST: Missing content length in content server upload (note 925327)
( 21) ( 0.047) CST Patch Collection 06 2006 (note 921223)
( 22) ( 0.047) Corrections within the SAP content of filter (note 925602)
( 23) ( 0.049) CST Patch Collection 09 2006 (note 928898)
( 24) ( 0.053) CST Patch Collection 14 2006 (note 937223)
( 25) ( 0.057) CST Patch Collection 17 2006 (note 944284)
( 26) ( 0.060) CST Patch Collection 22 2006 (note 950845)
( 27) ( 0.063) ICM could not handle more than 100 workprocesses (note 956048)
( 28) ( 0.065) CST Patch Collection 26 2006 (note 957514)
( 29) ( 0.069) CST Patch Collection 29 2006 (note 962917)
( 30) ( 0.073) CST Patch Collection 33 2006 (note 970657)
( 31) ( 0.076) CST Patch Collection 36 2006 (note 975552)
( 32) ( 0.079) CST Patch Collection 39 2006 (note 981959)
( 33) ( 0.083) CST Patch Collection 42 2006 (note 991211)
( 34) ( 0.084) Fix potential deadlock in CL_HTTP_CLIENT->LISTEN (note 851852)
( 35) ( 0.087) CST Patch Collection 47 2006 (note 999284) -
CRM_UI Reporting - HTTPS Terminating at Web Dispatcher or SSL all the way
Hi,
We need to set up access to crm_ui reports (leads and marketing mainly) in CRM 7.0 for vendors coming from the internet. The CRM server is in the internal network. In order for this to work I plan to setup the web-dispatcher in the application dmz. The initial login is going to be via the web dmz layer (using sun's iplanet server), which then routes the crm URL to the web dispatcher in the App dmz and then from the web dispatcher to CRM server.
One requirement from our security team is to set up the flow as HTTPS.
On going through SAP help I get the impression that it can be set up two ways, one, configuring web dispatcher to pass the SSL connection to backend, & two - configuring the web dispatcher to terminate SSL.
Seems the former is quite straight forward (from SAP online help we have to set the icm/server_port_<xx>> = PROT=ROUTER) but does it also require that we setup the crm_ui_frame service as SSL and activate the HTTPS service in ICM?
Or is it better to go via the second option (HTTPS termination) without changing the backend setup? SAP Online help lists steps to do the HTTPS termination but I have not come across any detailed documentation for the first method.
Any thoughts, suggestions will be helpful for either scenario.
Thanks,
Rommel BhanThanks Martin the document helped.
Now the web dispatcher seems to talk to the HTTPS port on the backend.
However there is one issue I see in the dev_webdisp and was wondering if you have an insight.
Based on webdispatcher parameters, its taling to ms_https_port 8533 of backend
[Thr 773] Mon Feb 15 15:03:35 2010
[Thr 773] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 773] SecudeSSL_SessionStart: SSL_connect() failed --
[Thr 773] secude_error 9 (0x00000009) = "the verification of the server's certificate chain failed"
[Thr 773] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 773] ERROR in ssl3_get_server_certificate: (9/0x0009) the verification of the server's certificate chain failed
[Thr 773] ERROR in af_verify_Certificates: (27/0x001b) Chain of certificates is incomplete : "CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE"
[Thr 773] ERROR in get_path: (27/0x001b) Found root certificate of <CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE> which does not fit the given PKRoot
[Thr 773] ERROR in verify_with_PKs: (27/0x001b) Found root certificate of <CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE> which does not fit the given PKRoot
[Thr 773] << -
End of Secude-SSL Errorstack -
[Thr 773] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"
[Thr 773] SSL NI-sock: local=10.104.146.81:62579 peer=10.104.146.81:8533
[Thr 773] <<- ERROR: SapSSLSessionStart(sssl_hdl=110acb850)==SSSLERR_SSL_CONNECT
[Thr 773] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 1911]
[Thr 773] *** ERROR => IcmConnClientRqCreate() failed (rc=-14) [icrxx_mt.c 5976]
[Thr 773] *** ERROR => Could not connect to SAP Message Server at sapcms02. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 3289]
[Thr 773] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 3290]
[Thr 773] *** ERROR => see also SAP note 552286 [icrxx_mt.c 3291]
My backend is setup with SSL and web dispatcher is set to the following. Also since the backend and sapweb dispatcher are on the same host, using the same sidadm, the SSL stuff is on one location. I generated the SAPSSLS.pse in the backend using STRUST
Accessibility of Message Servers
rdisp/mshost = sapcms02
ms/http_port = 8100
ms/https_port = 8533
wdisp/server_info_protocol = https
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=ROUTER,PORT=60000
icm/server_port_1 = PROT=HTTPS,PORT=0
icm/server_port_2 = PROT=HTTP,PORT=8080 <-- web dispatcher admin port
#SSL parameters similar to one in backend
ssf/ssfapi_lib = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
sec/libsapsecu = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
ssf/name = SAPSECULIB
ssl/ssl_lib = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
ssl/server_pse=/usr/sap/CMS/DVEBMGS00/sec/SAPSSLS.pse
ssl/client_pse=/usr/sap/CMS/DVEBMGS00/sec/SAPSSLC.pse -
Please i need your help, i´am new in this and i´am trying to run the portal on internet with the web dispatcher, i already get the wd work, and i can see the admin page.
I have de wd running on a web server (saphost1) in standalone mode,(when i configured the wd i gave the portal message server port, and the name of the host in which the portal is running), and the portal running in other server (saphost2) in an ABAP+JAVA WebAS,
i want to access the portal through the wd but i don´t know how to do that (redirect the url from saphost1:/irj/portal) , i searched in the docs but i haven´t found something.
Please help me i really need to get this done the sooner as possible
Thanks
CoatlHi Martin!!!
Thank you very much, that was just what i was looking for. i have another doubt, i done everything that the SAP Library says, but when i try to display the portal, i get the next error:
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Wed Feb 14 12:46:58 2007
Module: http_route.c
Line: 3122
Server: acsservicios__00
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
In the sapwebdisp.pfl i have the next values:
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 6
add default directory settings
DIR_EXECUTABLE = .
DIR_INSTANCE = .
Accessibility of Message Servers
rdisp/mshost = acslobot.advanced.local
ms/http_port = 8106
use static description files for logon groups: group info
wdisp/group_info_location = file:
icrgroups.txt
use static description files for logon groups: url prefixes
wdisp/url_map_location = file:
urlinfo.txt
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/server_info_location = file:
C:\SAPWebDisp\icrgroups.txt
wdisp/HTTPS/max_pooled_con = 500
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8006
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/icm/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt
icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/portal
when i aces to de address: <webdisphost>:8006/...i get the mentioned error, where 8006 is the port where the wd listen, but when i try to aces the url <webdisphost>:8006 it says that the page cant be found
What can be grown with my configuration....please need your help
Coatl -
Error when configuring Web Dispatcher for SSL with Enterprise Portal
We are in the process of configuring the Web Dispatcher using SSL to connect to our Enterprise Portal (the Web Dispatcher will be in the DMZ). We have followed all of the help.sap.com guides and now have SSL listening on the EP side (port 8103). We are now receiving this strange certificate error when we start the Web Dispatcher:
[Thr 5332] Tue Mar 20 00:36:23 2007
[Thr 5332] MatchTargetName("<FULLY QUALIFIED HOSTNAME>", "CN=XXX, OU=XXX, O=XXXX, C=XX") FAILS
[Thr 5332] SSL socket: local=<IPADDRESS>:4742 peer=<IPADDRESS>:8103
[Thr 5332] <<- ERROR: SapSSLSessionStart(sssl_hdl=009D7670)==SSSLERR_SERVER_CERT_MISMATCH
[Thr 5332] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-30): SSSLERR_SERVER_CERT_MISMATCH [icxxconn.c 2005]
[Thr 5332] *** ERROR => IcmConnClientRqCreate() failed (rc=-14) [icrxx.c 4919]
[Thr 5332] *** ERROR => Could not connect to SAP Message Server at <FULLY QUALIFIED HOST NAME>. URL=/msgserver/text/logon?version=1.2 [icrxx.c 2301]
[Thr 5332] *** ERROR => rc=-1, HTTP response code: 0 [icrxx.c 2302]
[Thr 5332] *** ERROR => see also OSS note 552286 [icrxx.c 2303]
We have gone through the trouble shooting note 552286 as listed in the error above. Any assistance is appreciated.Hello, did you receive any resolution for this problem? We are receiving a similar error and I am unsure of how to resolve.
-
Web dispatcher upgradation document from netweaver 7.0 to 7.1
hi guys,
I need web dispatcher upgradation document.i didn't get document in service market place and sdn.So please tell that document site.Hi Srinivas,
If you are looking for Web Dispatcher patch upgradation..here is the procedure
Download SAP Web Dispatcher latest version based on your OS.
1) This is available on SAP Service Marketplace at http://service.sap.com/patches:
Support Packages and Patches
-> Entry by Application Group
-> Additional Components
-> SAP Kernel
-> SAP Kernel 32 Bit or SAP Kernel 64 Bit
-> SAP Kernel 7.00 nn Bit
-> Operating system platform
-> "Database independent
The package is called sapwebdisp_<.....>.sar
2) Shutdown your SAP system and take the kernel backup.
3) Uncar the file sapwebdisp_<....>.sar and copy the content to the kernel directory
4) Start the SAP system
Check Note 538405 - Composite SAP Note: SAP Web Dispatcher
Please close the thread if this answers your question.
Thanks,
Sridhar -
URL for SOAP sender in case of web dispatcher
Hello,
I have a scenario SOAP-->XI -->RFC synchronous.
The soap request coming to XI is HTTPS without client authentication.
The URL is:
https://sapxiq:50101/XISOAPAdapter/MessageServlet?channel=:Srv_Web:Srv_Web_Soap_Server&version=3.0&Sender.Service=Srv_Web&Interface=http%3A%2F%2Fabc.com%2Fxi%2FeBillViewer%5Eos_getDocumentRequest
We have installed web dispatcher for load balancing.
Do I need to change the URL to replace web dispatcher host and port?
What is the additional setting need to be done in the web dispatcher profile?
Do I need to add icm/server_port_1 = PROT=ROUTER,PORT=443 in profile?
Thanks in advance,
Beena.Hi Beena
Just refer SAP note 538405
http://help.sap.com/saphelp_47x200/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm
http://mysapinkpot.blogspot.com/2007/11/sap-web-dispatcher.html
Re: Web Dispatcher
I hope this solved your query.
Regards
Abhishek -
Web dispatcher not starting and getting the error
Hi everybody.i got this error when i am trying to start web dipatcher. how can i over come this?
SAP Network Interface Router, Version 39.1 (SP3)
command line arg 0: ./saprouter
command line arg 1: -r
command line arg 2: -K
command line arg 3: p:CN=SGBWEP00, OU=0000709450, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
IBM RS/6000 with AIX (st,ascii,SAP_UC/size_t/void* = 8/64/64)
SncInit(): Trying builtin default as a
gssapi library name: "sncgss.o".
ERROR => DlLoadLib: dlopen()= 0509-022 Cannot load module .
0509-026 System error: A file or directory in the path name does not exist. -> DLENOACCESS (2,No such file or directory) [dlux.c 314]
ERROR => SncPDLInit(): DlLoadLib("sncgss.o")=DLENOACCESS
[sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss.o not loaded
[sncxxdl.0604]<<- SncInit()==SNCERR_INIT
sec_avail = "false"
ERROR => NiSncInit: SncInit failed (rc=-1) [nisnc.c 653]
ERROR => main: NiSncInit failed (rc=-17) [nirout.cpp 1349]
ERROR SNC processing failed:
SncInit
TIME Mon Feb 23 11:21:41 2009
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -17
MODULE nisnc.c
LINE 652
DETAIL NiSncInit: sncrc=-1
COUNTER 3
<<- ERROR: SncDone()==SNCERR_INIT_FIRST
thanksHello Nani,
It looks to be a SNC Issue.
just check wether you have the parameter snc/gssapi_lib define in ur profile of SAP system
This parameter should be set to the path of your gssapi32.dll file
Also u must also have a system variable defined SNC_LIB which is again to the path of gssapi32.dll
Also make sure that gssapi32.dll exists
Check these,ur web dispatcher might come up
Rohit -
Problem with Web Dispatcher with Double Stack
We have the latest version of Web Dispatcher - 7.0 with latest patch.
I'm having a problem where I am trying to use the web dispatcher for load balancing in a double stack (ABAP/JAVA) system. The person who did the install pointed the installation to the wrong server (which I assume can be easily changed in the profile). However, on the page where it indicates to activate the SICF services he left the box unchecked (but I checked that necessary ones were activated per note 552286). I now get these kind of errors when pointing to the http message server on a different system (he installed it assuming it was just for portal (java):
[Thr 5] *** ERROR => ICP_StructValue: illegal struct reference: wdisp_host_info.capacityIsFi
xed [icpvalue_mt. 257]
[Thr 5] *** ERROR => caught ICP exception (eval): ICP_StructValue: illegal struct reference:
wdisp_host_info.capacityIsFixed [icpvalue_mt.cpp 257] [http_adm_mt. 1488]
I get the above error when I go to "monitor server" groups in the web dispatcher admin console.
Here is my profile:
SAPSYSTEMNAME = PW4
SAPSYSTEM = 01
INSTANCE_NAME = W01
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = <fully qualified hostname>
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=81$$
Any insight is greatly appreciated!!Hi,
I've never seen this error but some thing seems strange to me :
You use the same port (8101) for the listening port of the web dispatcher and the listening port of the message server of you back office system.
Is it really the case ?
Is PW4 the SID of you web disptcher ?
Is SAPSYSTEM = 01 the sysnr of your web dispatcher ?
I hope that the info of the web disptcher is not mixed up with the back office info ?
Regards,
Olivier -
SAP Web dispatcher and WebAS 6.20 ?
Hi all,
I'm trying to configure a standalone SAP Web dispatcher (SWD) to access our WebAS (WAS), but I don't understand how to setup the configurations files.
Currently I can reach the SWD admin via: http://swdhost:81/sap/wdisp/admin/default.html
The WebAS (ABAP) service I want to access is at:
http://washost/ris
The SWD pfl file looks like this:
# Profile generated by sapwebdisp bootstrap
# unique instance number
SAPSYSTEM = 1
# Accesssability of Message Servers
rdisp/mshost = swdhost
ms/http_port = 80
# SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/url_map_location = file://urlprefix.txt
# SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=81
# SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
Urlprefix.txt looks like this:
version 1.0
PREFIX=%2fRIS%2f&CASE=&VHOST=%2a%3a%2a%3b
Now after reading most of the post in the forum and the docs, I still cant understand how I can "say" to SWD to map http://swdhost:81/ris to http://washost/ris .
Thanks in advance for your help.
Best Regards
ErikHi Alexander,
Thanks, the ms/http_port parameter was not set in my WAShost, now the SWD can see the WAS
now if I try to reach :
http://WAShost:81/sap/public/ping , I get a reply from my WAShost.
but I can't reach http://SWDhost:81/ris or http://SWDhost:81/sap/bc/was/sap/zris
http://WAShost/ris is an alias of http://WAShost/sap/bc/was/sap/zris.
Anyway thanks already.
Cheers
Erik -
Web dispatcher and J2EE load balancing
I have portal DBCI on one server and DI on multiple servers. I implemented Web dispatcher in front of the DI and it does the load balancing across all DI and CI. What I want to do though is not to route any users to CI instance - ie take CI server processes out of load balancing.
In ABAP environment you could create a logon group and not put CI in the group and users coming through the logon group do not go to the CI. I would like to do the same with Portal Java processes. In help.sap.com I found that web dispatcher uses default !J2EE group if there are no groups defined - to distribute users but I can not find anyway to define a logon group for J2EE java.
Does anybody out there know how to do this - define a logon group and include only DI and not CI in that?> Raj,
>
> Which versions are you on J2EE? EP?
> If you are on EP SP14 or NW01 you can do workload
> distribution within the portal.
>
> James
We are using NW 04 based EP 6 SP 16. I am looking for to use web dispatcher to distribute users on the DI servers and not distribute any users on the CI server. What can I do so that if admin user enter http://CI_server:50000/irj then they can login to the CI server if users come through webdispatcher then they are not put on the CI but go to one of the DI servers only. By default web dispatcher would send some users to CI and I don't want that. -
Single Web Dispatcher for Multiple SAP Systems
Having read a number of posts & S-Notes, I found that Web Dispatcher 7.2 is capable of routing between multiple SAP instances.
But despite having troubleshooted, I am unable to make it work. I have two separate installations ERP & Portal on the same host, but my web dispatcher only routes to one of them at the same time. Simultaneous access to these 2 systems is not possible either with URL or Port control procedure mentioned at url http://help.sap.com/saphelp_nw72/helpdata/en/c5/ec466f5544409982c7d3ca29ce1ad3/frameset.htm
Can anyone point an error in my below mentioned configuration of web dispatcher file.
I want requests on port 8853 of my web-dispatcher to be routed to system DEV &
the requests on port 8843 of my web-dispatcher to be routed to system DEP
rdisp/mshost = sapdeverp
ms/http_port = 8100
icm/server_port_0 = PROT=HTTP,PORT=8853
icm/server_port_1 = PROT=HTTP,PORT=8843
wdisp/system_0 = SID=DEV, MSHOST=sapdeverp, MSPORT=8100, SRCSRV=*:8853
wdisp/system_1 = SID=DEP, MSHOST=sapdeverp, MSPORT=8102, SRCSRV=*:8843
Can we mention multiple message servers instead of single message server "rdisp/mshost = sapdeverp
ms/http_port = 8100" ?
Any suggestions ?Very right in mentioning this point coz myself have been confused over it but if I remove these lines & execute the -checkconfig:
then it states as below:
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 8192
Server info will be retrieved from host: : with protocol: http
Checking connection to message server...
ERROR: Connection to message server failed: NIESERV_UNKNOWN
Check ended with 1 errors, 0 warnings
More over accessing the servers give the following error:"
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Mon Nov 29 17:28:11 2010
Module: http_route.c
Line: 3139
Server: solomon__03
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
I have tried this actually, even tried the option ms/server_port_0 & 1 to replace ms/http_port but it didnt work either.
Any more ideas.. ? -
If I connect my Web Dispatcher to a WAS that is not running SNC it connects okay but if I point it to a WAS that is running SNC I get SNC related arrors in the file dev_webdisp.log:
[Thr 6968] *** ERROR => invalid service descriptor token 'p:GB\SAPServiceQAS' [ictxxroute_r 2681]
[Thr 6968] *** ERROR => syntax error in text description near line 4 [ictxxroute_r 3135]
[Thr 6968] *** ERROR => IcrUpdateServerPoolFromDescrString() failed 6 [icrxx.c 1762]
If I call the /sap/public/ping service on the WAS directly from Internet Explorer on my PC it connects okay, but if I call the same service from my PC via the Web Dispatcher it failes with the above message in the log file and the below HTTP message:
500 Dispatching Error
Dispatching Error
Error: -26
Version: 6040
Component: HTTP_ROUTE
Date/Time: Tue Feb 07 12:47:50 2006
Module: http_route.c
Line: 2352
Server: UKLONSAP011_QE7_10
Detail: no valid destination server available for '!ALL' rc=13
I cannot find any information relating to the Web Dispatcher and SNC on help.sap.com or OSS.
Do I have to install the SNC library onto the Web Dispatcher server? If so, how do I then reference it?
Any ideas?
Thanks.
PaulHi Paul,
SNC library is not required for Web Dispatcher.
The problem seems to be the data the message server provides with the URL http://<msg_host>:<msg_http_port>/msgserver/text/logon?version=1.2
If SNC is activated you will have an entry for RFCS in the data like:
RFCS bin.wdf.sap.corp 4853 p/secude:CN=BIN, O=SAP-AG, C=DE
The error " invalid service descriptor token 'p:GB\SAPServiceQAS' " indicates that the parser could not parse the response from the message server. Then the server list is empty and you get the "dispatching error".
Maybe the backslash lets the parser struggle. Please check that you have an up to date version running (6.40 kernel patch level > 90). If that is the case, then this problem should be handled by OSS message.
Kind regards,
Oliver
Maybe you are looking for
-
My iPhone is using so much data and I do not know why?
I do not understand how my iPhone is using so much data
-
Macbook Pro Closed Clamshell FaceTime with external webcam?
Is this possible. I have an external monitor,keyboard, mouse etc and the twelvesouth bookarc set up so my macbook pro can be my desktop as well in closed clamshell mode. I miss out on being able to use facetime/skype etc because the monitor I use i
-
Duplicate records In Master Data
Hi, I don't understant why we get Duplicate records in Master Data though it has got the overwritten functionality.. Any idea will be appreciated..
-
Setting Application Default Page
Hi, I have an application that I want the start page to be the HOME page instead of the LOGIN page. I looked every where in Application Builder but I could not find how to change the start page. Is there a way to change the start page of my applicati
-
Client Proxy--unable to edit Execute Asynchronous method !!!!
Hi All, With Reference to the blog stated below /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies I tried to write code inside the Execute Asynchronous method. But I was unable to edit the method and it comes as can not