When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?
Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.
Similar Messages
-
Did anyone else have problems with in App purchases from an IPod? I get charged twice for the same order... How do I get a credit for the coins not received?
Try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
How I could get a receipt for the purchase i made in the app store?
I just purchased an app for my iMac and I was wondering how I could get a receipt for the purchase?
The redeipt comes in the your email automatically in 24 to 48 hours.
-
How do I get a manual for the i4s phone?
how do I get a manual for the i4s phone?
<Re-Titled By Host>The iPhone manuals are primarily user guides for a specific operating system version (e.g. iOS 7.1). You can download one from: Apple - Support - Manuals
-
How can I get a refund for the u2 album that Apple charged me for
I have just been charged £27.99 for the U2 album that I did not want. How do I get a refund for this. I can't stand U2!!
£27.99 for the album ? If you are referring to The Songs Of Innocence album (£7.99) then that was given free to everyone three months ago, and was free until 13th October - you are sure that you've been charged, it's not a temporary store holding charge ? The purchase price should show on your account's purchase history : See your purchase history in the iTunes Store - or http://reportaproblem.apple.com on your iPad.
If you have been charged for the album but you didn't buy it then try contacting iTunes Support via the above 'report a problem' link.
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
How can I get null values for the later weeks
Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
v_query VARCHAR2(4000);
TYPE ref_cursor IS REF CURSOR;
v_refcur ref_cursor;
v_sum NUMBER;
v_id NUMBER;
v_name VARCHAR2(1000);
v_weeknum NUMBER;
v_pernum NUMBER;
v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
FROM s_postn) postn_tbl
WHERE lvl_6_id = 5767
AND fiscal_year = 2008
AND b.week_num < 4
AND b.period_num = 3
AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
EXIT WHEN v_refcur%notfound;
dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PMSure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3 (
4 select 1 period_num, 1 week_num, 10 bkg1 from dual
5 union all
6 select 1, 2, 40 from dual
7 union all
8 select 1, 3, 30 from dual
9 union all
10 select 1, 2, 20 from dual
11 union all
12 select 1, 1, 10 from dual
13 union all
14 select 1, 1, 20 from dual
15 union all
16 select 1, 3, 10 from dual
17 union all
18 select 2, 1, 15 from dual
19 union all
20 select 2, 2, 20 from dual
21 union all
22 select 2, 3, 10 from dual
23 union all
24 select 2, 1, 15 from dual
25 union all
26 select 2, 2, 30 from dual
27 union all
28 select 2, 3, 20 from dual
29 )
30 -- End Of Test Data --
31 select period_num,
32 week_num,
33 (
34 select sum(week_tab.bkg1)
35 from week_tab
36 where period_num = m.period_num
37 and week_num = m.week_num
38 group by week_num, period_num
39 ) sum_bkg1
40 from (
41 select dum.week_num,
42 wk.period_num
43 from (
44 select 1 week_num from dual
45 union all
46 select 2 from dual
47 union all
48 select 3 from dual
49 union all
50 select 4 from dual
51 union all
52 select 5 from dual
53 ) dum ,
54 (
55 select distinct period_num
56 from week_tab
57 ) wk
58 ) m;
PERIOD_NUM WEEK_NUM SUM_BKG1
1 1 40
1 2 60
1 3 40
1 4
1 5
2 1 30
2 2 50
2 3 30
2 4
2 5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De. -
Any iTunes above 10 will screw up .mov accessibility in FCP, so I do not want to download iTunes 11 just to get this iPod Touch updated to 5 or 6.
Can I download the update some other way?If you have a 4G iPod (one with cameras) you can only go to iOS 6.2.1 and that requires iTunes 10.7 or above.
If you have a 3G you can go to 5.5.1 with iTunes 10.5 or later.
A 2G can only go to 4.2.1
Identifying iPod models
you can update on another computer with the right version of iTunes but you will not be able to sync with your computer unless you update iTunes on your computer. -
How do i get free games for my ipod classic?
Please can someone help me?
I love to play games but when I downloading them on the Itunes store and try to get them on my Ipod classic, they aren't sycronist on it!
What can I do?There are none available; iOS applications can't be used on an iPod classic.
(78304) -
How do I get a battery for my iPod classic 1st generation
Hello I have a iPod classic 1st generation that might need a new battery, and I was wondering if you guys could help me find one. Also a wall charger for it would be nice too, so could you help me with that one too?
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
I want to know how i can get more games for my ipod nano 4th gen?
I have an ipod nano 4th gen i pod. Ive been trying to find games for it in the itunes store but i can only find 2 tabs one for iphone the other for ipad, but nothing for ipod. There dont seem to be any clear info on it in the store. Ive looked on the web to see if i can find help but i cant find this button they say that says Ipod games thats supose to be to the right of the screen. Can any one help me please?
Apple quit offering click wheel games over 2 years ago.
-
How do I get Air runtime for the android emulator
All the links I have found say you can download it after signing up for the pre-release; however, that is no longer viable as it is not pre-release anymore. I cannot find anywhere to download the apk file anymore... and I need to get it on the emulator.
I am still digging ... means I still look for the best way to install a Flex/Air combo that will allow me to develop Air Apps for Android (using a Maven based dev env - flex-mojo), means I actually do NOT want to install or use Flash Builder or Flash Professional CS5 or ... whatever.
So here is what I found out (the result of 3 days of work (elapse time)).
To get a Flex/Air SDK up and running you need to ...
Download the Flex SDK (e.g. 4.1.0.16076) from http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+4This will NOT contain an/the AIR SDK (and that means also no runtimes)
Download the Air SDK (e.g. 2.5.1) from http://www.adobe.com/products/air/sdk/
Copy the Air SDK over the Flex SDK as described here http://kb2.adobe.com/cps/495/cpsid_49532.htmlNote: Make sure that the Air SDK is newer than the Flex SDK. Otherwise the Flex SDK might use features of the Air SDK that are not present in the Air SDK and that might result in compile or runtime errors. I was not able to find a definition of "newer", but assume that Air 2.5 is newer than Flex 4.1
... or ...
You download the Flex SDK 4.5.0.17689 from http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+HeroThis actually contains (means is already merged with) an Air SDK (don't know which version)
Right now, I am stuck to make this work with flex-mojos 3.7.1, but will report back, if I find a solution. -
With the recent upgrade to FF 6.0 how do we get password protection for the internet with FF back?
When our Mac was set up we had a password protected startup for FF, so without the password you could not start it.
With the recent upgrade to 6.0 that password request disappeared. How do we get it back?When our Mac was set up we had a password protected startup for FF, so without the password you could not start it.
With the recent upgrade to 6.0 that password request disappeared. How do we get it back? -
How can we get record numbers for the rows after grouping them?
Post Author: preethibaddam
CA Forum: Formula
hii everyone,
i want to number those records which are grouped by a column.
eg: if i group the emp table with the deptno then the records for the deptno10 group should start from 1 and end with an N number and again when it shifted to deptno20 group than the records for that deptno20 should again start with 1 and end with N number.
i tried placing record number from the field explorer but it is not working. the other group records start with the ended number from the first group.
thanksPost Author: V361
CA Forum: Formula
Record number from CR will count all the records. You could use a running total, and reset on change of group. -
How can i get windows drivers for the 2013 MacBook Pro Retina?
Hi there,
today I have installed on my late 2013 MBP retina via the Boot Camp Windows 8.1. The installation was smoothly but some drivers are not present including the wifi driver.
Through online research, I found out that in the current version of Boot Camp no drivers for the 2013 model are listed. Do you have one probably have an idea how to get it to run anyway?For feedback from experienced users, post in the Final Cut Pro X forum here.
They should be able to offer suggestions for training.
Apple - Final Cut Pro X - Resources -
how do i get back mail and iphoto?
Mail should be there, have you looked in the Aplications folder?
-
My laptop resolution changes many times a day because I use a docking station. I suspect that this could be causing Panorama to rearrange my tab groups. None the less, I would like it to stop! Anyone know how I can get it to comply?
Hello. I have just tried this add-on you suggested, and no change.
And no, there was no some other add-on before, not that I know about it. Mainly, I need this option while I'm on a forum (IP board powered), it is not really something so important, but it's neat function for me.
So, to be more detailed - I read a certain topic on this forum, and some of the posts from other members contain YouTube screens (looking same as on the original YouTube page), showing the frame of a video.
In earlier versions of Firefox, I used to click on a small YouTube logo button (right side, down, between "watch on full screen" and "watch later" buttons). Clicking on this button automatically opened new tab, leaving forum tab as it is, and in new tab original YouTube page, with that certain video. In the same time, in Google search page, when clicking on a link, all links were opening in the same tab.
Now, after some of the latest updates of Firefox, I noticed that some default settings were changed - in Google search, clicking on a link always opens a link in a new tab. I have found out here on your forum how to set this back in about:config feature, and now I have again that links in a Google results page are opened in the same tab (that's the way I like it).
But YouTube screens on this forum are now also being opened in the same tab, and that is what I don't like, and trying to change back.
So, what I need: all links to open in the same tab after clicking, as I have it now, and YouTube screens (e. g. on this forum) to be opened in a new tab (by clicking on a small YouTube logo ("watch this video on YouTube").
Pedantic I am, I know that, and I know that this may look silly to some people, but if there is a way to do something, please tell me.
Thanks for answering, and best regards.
P.S.
Is it possible that forum updates changed my setting, and not the Firefox? Thanks again...
Maybe you are looking for
-
Songs can no longer be burned on back up disk so if one changes comp. GODBY SONGS...
-
Issue with the drill path in Hierarchy in OBIEE 11g
Hi , We have upgraded to 11g(11.1.16.6) and an issue we are facing is that the drill path for the time hierarchy is not same. In 10g its Year >Quarter >Month>Date. BUt in 11g its rendering as Year >Quarter >Month>Week Number >Date. The week number is
-
Please help with workflow - iMovie '08 and Panasonic HDC-SD1
My two teenage sons play high school basketball and I've been videotaping their games using our new Panasonic SD1. Picture quality is terrific, but I've been taken aback by how much time it takes to get the footage from the camera into iMovie and the
-
Could not complete the Check Spelling command because of a program error.
I'm trying to spell check a flyer and I continue to get this message.
-
IMac crashed when installing 9.2.1 over 9.1
Towards the end of installing 9.2.1 (from downloaded image) I got an error dialog box which said Retry, Skip or Stop. No matter what I did, the machine crashed. Now it won't start up normally or from any bootable CD - just sits there with a grey scre