Which Access sequence will use for sales tax condition type for TAXINN

hi.,
which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
Because i couldnot create the condition record,the system not accepted for tax indicator.
Regards.,
lakshmanan

We also got the same problem with our client and escalated it to SAP.
they advised to use the access sequence JIND which consists of condition tables in the order given below
Step Condn Table
10 354
20 355
30 40
Attach this to your condition types.
Rewards if it helps.
Regards,
Anbu

Similar Messages

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

Can we maintain diff tax codes for one tax condition type in creating CRs

Hi Gurus,
Can we maintain diff tax codes for one tax condition type during maintaining of Condition Records. (Taxes)
For example in VK11 screen for different combination of tax classification for customer and tax classification for material and
tax codes like P0, P1, P2 etc. If so which tax code will be picked during creation of sales order? Pls help me........
Regards.......Divakaran

Hi Karan,
Yes we can.
For example you have three tax code
P0 -- 0% (Fully exempt)
P1-- 5% (Half tax)
P2 -- 10% (Full tax)
Now when you create the condition record then you have to create the three condition record for one condition type
MWST
Country -- tax classification of customer -- tax classification of material -- Tax % -- Tax code
IN -
> 0 (Tax exempt) -
> 1 (Full tax) -
> 0 -
> P0
IN -
> 1 (half Tax ) -
>1 (Full tax) -
> 5% -
> P1
IN -
> 2 (Full Tax ) -
> 1 (Full tax) -
> 10% -
> P2
Hope it helps,
Regards,
MT
Edited by: M T on Mar 23, 2010 4:19 PM
Edited by: M T on Mar 23, 2010 7:27 PM

Function Module for Sales items condition types

Hi,
I would like to get Sales item amount details based on condition types tax or discount.
Is there any function module to output amount for sales item and condition type.
Thanks in advance for your help.
Thanks,
Ramana

hi
i have vbeln and posnr
my requirement is to calculate repricing for sales order.
i am having problem with function pricing means what parameters to be passed in komp and komk structure.
can you plz send me sample code if possible?
thankx in advance.

Pricing date for the tax condition type should be invoice creation date

HI Folks,
As per the current design taxes conditions are determining based on the Service rendered date which is similar to the GI date and pricing type is G in copy control .
New requirement is taxes should calculate based on the Invoice creation date in the invoice.in order to acheive the solution i have customized the tax related condition type functionality "pricing date" as KOMP-ERDAT but still system calcualting the taxes based on the service rendered date and same also writing in the invoice also.
pLease help me out what need to be configured here to acheive the solution.
Regards,
Ram.

Hello XYZ,
As you said the tax is calculated in Taxware system, i think taxware system is configured to calculate the taxes based on the "service rendered date". That is the reason why even you have changed the pricing date to be billing date for condition type XR1 taxware is not behaving as you expected.
You have two options.
1. Invocie creation date/ blling date is available in the structure "TAX_CAL_ITEM_IN00".If it is available in the structure ask the Taxware team to make changes in their system to consider that field value instead of the service rendered date.
2. Alternatively you can over write the filed which contains the service rendered date value with the value of billing date. This way no changes required in Taxware system. You can do that in cusotmer exit "EXIT_SAPLFYTX_USER_001" include ZXFYTU03 .
Based on my exeperince i think the consistant approach would be going with option 1 . Please revert if you need furhter information on the same
Thanks,
Srini
Edited by: srini vasarao on Jul 14, 2011 12:02 PM

Tax condition table for an access sequence

Hi,
I serched in the forums to find t.code or menu path for creating a tax condition table for MWST tax condition type, but no body has given any specific answer. most of them have given the SD or MM related condition tables.
My requirement is, I want to create a key combination for "MWST" TAX condition type. Please let me know the process of creating the key combination for TAX condition type.
Thanks in advance.
Anil

Hi
MWST is the standard progarm access sequence
condition type is base to calculation of main the tax procedure
but the thing the access sequence and conition type are pure MM, SD Work,
if you need to table :
T685,T685A,T685T,
are else you use Z table with the help of technical consultants'
Thanks
Madhu

Ouput determination for sales documents - Condition table

Hello All,
In the condition table I currently have the following fields - Sales org/Dist channel/Sales doc type/Order reason/User.
The field User is Created By VBAK-ERNAM. I want to change this to display the name of theperson that last modified the document. What field is this? CDHDR-USERNAME maybe?
And more importantly how do I go about making the change?
Would you recommend creating a new condition table?
Thanks in advance,
Suhas

Hi ,KIndly do the below settings
1.Delete the condition table from the access sequence :
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain Access sequence
2.Then go to the condition table and delte the ERNAM and add the AENAM and generate .
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---maintain condition table
3.Same condition table assign to the access sequence then access sequence will be assigned to out put type condition type
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain output types.
4.Assign the out put type to the partner function
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Assign Output type to partner functions
5.Maintain the Out put type in out put determination procedure
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Maintain Output determination procedures
6.Assign out put determination procedure to the sales document type and item categoiry
SPRO-IMG-Sales &dist->Basic functions->Output Control>Out put determinationMaintain Output detrmination for sales documents---Assign Output determination procedures
OR
Delete the old condition table and create the new condition table and assigned to new access sequence.
REgards
Damu

Sales tax condition not picking in p.o

Dear gurus,
I am getting problem of sales tax . Its maintained in tax pricing procedure. I haver maintained condition record for the same in FV11. I am getting all other taxes only sales tax condition is not appering? can any 1 tell about this?

u check whether sales tax condition type is assigned in fvll correctly to the same tax code
u assign the conditon type in excise defaults ( spro>log gen> tax on goods mvmts>india> determine excise duty> maintain excise defaults
and also check the validity periods.
If PO date is not falling with in the validtiy periods then system will not pick the valuye
chris

Identify TAX condition type from pricing procedure

Hello,
I need to identify Tax condition type for various countries used in Old sales orders.We are moving to an external Tax engine and I need to identify what condition are being used to calculate tax in various countries. I know the pricing procedure but we have a lot of sales order and there is no documentation available.Is there any table where I can filter based on the sales org from existing sales order and find the Corresponding Tax condition type.
Regards,
Amanda

One option is
you have to execute SE16, input table KONV where you maintain the tax condition type and execute.
System will populate all SD documents that are having that tax condition type. There you have to copy the field "Doc. condition" and paste it in VBAK table in SE16 so that you will get all sale orders.
The other option is
you need to identify what access sequence is maintained for that tax condition type which you can see in V/06. Next go to V/07, select this access sequence and execute. There check what tables are maintained. For example, in your case, it could be table 110. So you have to develop a query by table joining A110 and VBAK in SQVI where you can take sale orders based on sales organisation.
thanks
G. Lakshmipathi

Service tax condition types in Pricing Procedure in SD(Taxinn)

I need one more advice on Service tax.
I am configuring order type for services.In that in pricing I have to add the service tax conditions type for service tax & cess on that.We do not have any standard condition type in our pricing procedure for services.
Is there any standard SAP doc. to configure service tax condition types in pricing procedure or I have to copy from JLST & JLSR(surcharge).What about the account keys I will used for these condition types.
If you have any doc. related to this issue please send it to me....or suggest me what to do.
Please remeber I am using TaxINN tax procedure.
Please help me
Thanks & Regards
Sunil Garg

PROCEDURE: Initial Steps
Create two new Tax conditions: JSE4, JES4. Steps for creation of Tax Condition is illustrated below
Create new condition types
SAP Standard IMG -> Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Check Calculation Procedure. (Transaction OBYZ)
Select Define Condition Types
Select Condition Type JIN1 and Click on Copy as (F6) and give the Condition type as JSE4 and the Name as Service Tax.
Select Condition Type JIN5 and Click on Copy as (F6) and give the Condition type as JES4 and the Name as ECS on Service Tax.
Outcome: The two tax conditions, one for Service Tax and the second for Education Cess on Service Tax have now been created.
1. Create a new tax posting key VS9 and VS0.
The path for this is:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS9 and Name as India Service Tax.
Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS0 and Name as ECS on Service Tax.
Note: If there are multiple service tax registration numbers, you need to have separate account posting to different GL accounts based on service registration number. This can be done provided a separate tax code is maintained for each service registration number.
To achieve this you need to define a set of 2 separate G/L accounts for service tax and Education CESS on service tax respectively, for every service registration number.
In such a case, please activate multiple accounts posting per tax code as follows:
Defining the GL accounts for the Service tax and ECS on Service Tax:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting -> Define Tax accounts
Go to Details of the Transaction VS9 (Service Tax GL account) and enter the Chart of accounts
Select the Tax Code Check Box if you want to have Tax Code Specific GL accounts or Blank when the common GL accounts
Regards,
Rajesh Banka
Reward points if helpful.

How to change exchange rate type for specific pricing condition type

Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.

You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

Sales Order Unable to Use New Condition Tables for Tax Condition Type

Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
Yvonne

Hi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar

Which access sequence of Partner determination should be used?

Now my company is upgraded from CRM 2.0c to CRM 5.0 HR1. I found the different result about partner determination on business activity (via transaction code: CIC0) between two version.
On CRM 2.0C
Tcode: CIC0
Enter sold-to party code: 5300001 as activity partner, Contact person:244 on 'BP searching' workspace. Then on 'Maintain Business Transaction' workspace will display 5300001 as activity partner and 244 as Contact person.
Configuration:
Partner Function: 00000015 Contact person (CRM) using Access sequence 0002
Access sequence 0002 from activity partner
Dialog seq:10 has partner origin COM_PARTNER_A Preceding document and mark 'Determine in incorrect source partner'.
Dialog seq:20 has partner origin CRM_PARTNER_D General business partner model and have origin details; Partner Function category '0006 Activity partner' and Usage 'CRM'.
CIC0 of CRM 5.0 HR1
Tcode: CIC0
Enter sold-to party code: 5300001 as activity partner, Contact person:244 on 'BP searching' workspace. Then on 'Maintain Business Transaction' workspace will display 5300001 as activity partner and 66 as Contact person (66 is the first contact person of sold-to party master record:5300001).
Configation:
Partner Function: 00000015 Contact person (CRM) using Access sequence 0002
Access sequence 0002 from activity partner
Dialog seq:10 has partner origin COM_PARTNER_A Preceding document and mark 'Allow Incorrect Source'.
Dialog seq:20 has partner origin CRM_PARTNER_D DO NOT USE - General business partner model and have details on the source; Partner Function category '0006 Activity partner' and Usage 'CRM'.
Dialog seq:30 has partner origin CRM_PARTNER_C Business Partner Relationship and have details on the source; Partner Function category '0006 Activity partner' and Usage 'CRM'.
Please suggest me which access sequence should be used for getting the correct contact person (result same as CRM 2.0C).
Thanks you so much for support.

Hi,
to you receive the same result also in CRMD_ORDER, or only in CIC0. Please keep in mind that there is a difference! In CIC0 no pop-ups for selecting partners is executed, so the first contact person is taken (note 487734 gives a modification. Also the partner function of ICAGENT is necessary within CIC0.
From the view of CRMD_ORDER the following access sequence should be used:
10 COM_PARTNER_A Preceding Document
20 CRM_PARTNER_A BP Relationships By Sales Organization + Wait Flag + Partner Function category '0006 Activity partner' and Usage 'CRM'.
30 CRM_PARTNER_C Business Partner Relationships + Partner Function category '0006 Activity partner' and Usage 'CRM'.
Hope that this information is helpful!
Regards, Gerhard

How to decide which access sequence goes for which partner function ?

how to decide which access sequence goes for which partner function ?

Hi Padmaja,
If i understand your question correctly, below is my answer.
Lets take a example : In your requirement ..while creating Sales / service order (for ex if you are creating from preceding document)
you have to pick up the Contact person from preceding document & Employee responsible from responsible organization
For this in partner function assign Access sequence as below.
same way if the partner(here ex: Ship to party) has to be picked up from "Current partner" change the access sequence to "Current partner Sold to party"
Hope this gives better understanding, still for better understanding check the below links
http://www.guru99.com/partner-processing-in-sap-crm.html

Credit note for sales tax amount

Dear All,
I have a problem, my client is billed the sales tax amount but that customer is not liable for sales tax and accounting document also cleared. Now they want to give the credit note only for Sales tax amount and they wanted only tax account should debited and customer account should credited in the accounting entries.
Is that possible without any base price to create a credit note for sales tax amount?
But i have suggested that to create invoice correction request in that two entries are coming and i have make the tax to ZERO for second line item .But it is working fine for one case that is without excise duty in the original invoice and in the second case original invoice is having excise duty then excise entries also showing in the accounting document,.
Please anybody can help me out. Thanks in advance.
Thanks,
Narasimha

Dear Narasimha
I have one suggestion.
First check under which G/L Account, the tax amount has been debited.
Go to F-02, at the bottom, you can see [PstKy] Input a relevant posting key which is assigned to credit entries (better to check with your FI consultant) and input the above G/L Account in the next column and execute. In the subsequent screen, input the sales tax amount, Budiness Area and Value date and proceed.
Once you save F-02, in FS10N, the entries would be adjusted that is one the wrongly debited tax amount, one credit entry would be flowing. But I am not sure about accounting document whether this adjustment will get updated there or not.
thanks
G. Lakshmipathi

Which Access sequence will use for sales tax condition type for TAXINN

Similar Messages

Maybe you are looking for