Will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

Similar Messages

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?

Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins.

I need to change from Japan App Store to Australia App Store. I get this every time I try using My MacID: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." What next TY. JohnCahill

I moved from Japan to Australia. I need to change from Japan App Store to the Australian App Store. I get the following message every time I try using My MacID which was set up in Japan: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." At one point... by which path I do not remember... I was instructed to created a new ID. I fill out the new ID forms, but the address is rejected each time... quite confusing. Does it want a new name? But it says I cannot use an apple domain (tag?) even though I guess it has to be an apple address... ? So I have iTunes crdit cards purchansed in Australia, can't spend in AUstralian iTunes Store, get directed back to Japan each time, and can't open a new ID... What am I doing wrong? Thank you in advance. John. Australia.

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Is there a compatibility guide for SSDs in the late 2011 macbook pro model?

Is there a compatibility guide for SSDs in the late 2011 macbook pro model? I'm looking to purchase a 15.4" Late 2011 Macbook pro and was looking a SATA3 SSD that was supported (outside of the ones provided by Apple). Does anyone have any success stories they wish to share? I assume the problem with secondary bay and SATA3 has still not been resolved.

Have you looked at the OWC web site? They specialize in Mac peripherals and they have a good line of SSDs and secondary bays as well. My experience with them has been good but I am not ready for SSDs. For my needs the cost/benefits are not there.
Ciao.

I HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

i HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

Windows 7 operating system....constantly pops up with a window that says I am not on the internet and can't register my product....obviously I am on the internet at this moment because I am posting on an online forum. I downloaded the software four times now, after uninstalling it three times. I downloaded XI Pro.

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

Why has my native windows 7 Pro-64 network to a windows 7 Pro-64 VM has slowed to a crawl and freezes, after the new Arris cable modem was installed?

Please appreciate the details, so the complete situation can be visualized:
The office network:
New Mac Mini PC running Win 7Pro 64, (in boot camp), networked to an iMac running the same Win 7 Pro 64, VM, UNDER Fusion 7Pro.
To review: My treatment rooms former dell PC/running vista business/ running the server and network versions of my Dental practice mgmt & X-ray capture apps, had no probs WLAN to the front desk iMac running the same PC client dental network apps under the same vista business, & Fusion 4. The dell slowly fried its power supply .
I could not wait to replace it with a Mac mini/ boot camp/ win7 pro 64 bit, as it has to run natively to capture X-rays. The front desk iMac was also upgraded to os10.10.3/ Fusion 7pro/ and its own matching Win7 pro 64bit. The iMac is wired and WLAN connected to a netgear d600 router and a Time Warner Cable modem. The modem then failed and was replaced by an arris modem. As the Arris was configured out of the box, the network ran much slower slowed, as compared to the original modem. BUT- The Vonage 2 line phone system stopped working- no incoming or outgoing voices could be heard after it rang. Then twc remote configured it and the phone now works, but the network iMac slowed to a crawl, and now freezes when accessing the Mac Mini PC dental server to edit or enter data. The Mini perfectly accesses the internet via wifi. It accesses the front desk canon printer by wifi, and can print share they the iMac that is wired to the printer, as well, BUT, the network connection is a spinning pinwheel. The front desk imac easily finds the Mac Mini PC server on the network. It connects easily by entering the servers IPv4 address SHOULD THAT last value change. But if data isn't entered in slow motion, the window and app freezes, and has to be force quit by Task Manager!
Cause:
1. I think TWC switched the cable modem from the default- Non Bridged, to Bridged mode. Could this be the cause?
2. The network setting in fusion, on the iMac is auto detect, a setting that always worked with vista and with the new Win7 system, before TWC installed the new arris modem. 3. Switching to NAT does not work at all is there a different setting to use?
3. Does the Netgear Router have to have a port or pref configured so as not to block the Server.
4. might in need an Access Point (I have an extra netgear wdr3400) ).
5. Do I need an Extender that plugs into the AC LINE?
I hope this info helps.
PS:(some addtl info:
1. File sharing works fine between the minis -Mac and boot camp sides and between the iMacs- Mac and VM sides and between eother side to or from either of the 2 computers! 2. Also either office computer and all of my my home macs , (& my iPad, & iPhone), can access each other instantly and flawlessly, with splash top streamer and jump desktop remote apps, as controller or as client! In fact, the front desk iMac can remote control the mini PC AS IF YOU WERE DIRECTLY ENTERING INFO I TO IT!
SO I think it's either a misconfiguration in the TWC cable modem &/or some additional pref to config in the router? Thanks so much for your help, (been using VM's since VPC1. & Win95 in a iMac, 1999, DV MODEL! (TWC BLAMES VONAGE FOR NOT OPENING SOME PORTS IN THE TELE MODEM. Vonage blames TWC FOR NOTopeningj ITS PORTS IN THE CABLE MODEM, when they meant the ports on the Netgear. They have passed the buck for 6 weeks with not even a guess at what to do. VERY FRUSTRATING! Again, thanks to all!

Okay Saint Steven, I'll bite:
I read your description multiple times, very carefully, and I am still confused. May I suggest the following:
* Follow basic troubleshooting procedures. Isolate each individual problem. Don't try to get everything working at once. Make one change at a time.
* If I read your description correctly, the Netgear D600 (??) Router is the office LAN (not WLAN). Connect each piece on the LAN separately one-by-one, and test each piece individually. Get your LAN and its devices working first. Forget about the Vonage and the Arris Cable modem.
* Next, look at your Internet connection. Again, try each piece separately. Depending on how the original cable modem and the new Arris cable modem are configured, you may also have to adjust the configuration of the Netgear D600 Router.
* Finally, if you are still having problems, try to organize your thoughts and presentation before you post again. List each element in your network. List how each element is configured. Be systematic.
"Arris cable modem" does not help much - some are simple bridges, others are routers, etc.
To answer your questions:
1. I can't tell from your confusing description, but I don't think so. It seems like the problems are associated with the system changes you made (replacing Dell, etc.) and the problems seem to be isolated to the local LAN.
2. Auto detect should work, but it is easy to change and test, as long as you change one thing at a time.
3. No. The Netgear router should allow all communications on the local LAN. Could you have put the "server" in the DMZ?
Note: I could not find a Netgear "D600" model in a web search. Do you mean N600?
4. No. I doubt that you need an additional access point. Based on your description, everything appears to connect to the LAN.
5. No. See 4.
To repeat myself:
* Do careful, systematic troubleshooting.
* Provide carefully written, detailed description of your network and system configurations when you ask for help.
Good luck!

When will the Canon 7D be available to purchase in the store.

Can someone tell me if the 7D is going to be carried in the store and a date that it will be made available to purchase.

Reports have been coming out that some stores are getting limited supplies already. Particularly in California.
None are currently available in Ohio, Tennessee, or Florida at this time, and none are on order in those states.
I surely hope that Best Buy "does not miss the boat" on this camera. They better ship on the 11th, as they have promised this date to many folks.

I'm using Acrobat Pro 11. When printing an email to PDF most of the time it cuts off the text on the right margin. Setting look OK and I've moved things around on the email, but that doesn't seem to make any difference. Is there an Adobe setting I'm missi

Like I said above, print to Adobe pdf and it wants to cut off the text on the right margin. I can't see to find a setting that changes this. Any ideas??

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

After the upgrade of MacBook Pro to 10.9.4 the pc is too slow

I upgraded my laptop to 10.9.4 and now it is very slow, what can i do now? I wish to come back to the old system or if you have another solution can you suggest me something. Is possible to bring the laptop to an Apple center to change the system for free?

We need more information about your MacBook Pro. They have been in continuous production since 2006 with dozens of variants, each with its own capabilities and limitations. Do "About the Mac" from your Apple menu (left end of your menubar) and, in the resulting window, click the "More Info..." button to get this:
Note the lines of info I've outlined in red. Please tell us what those same lines read on your computer BUT DO NOT post your serial number here for security reasons (note I grayed out my serial number in the example)
Then please answer these questions:
1) Is it slow with only certain applications, or with anything you try to use/.do?
2) Are you running any of the following:
Anti-virus/internet security
Third-party "cleaning/tuning/optimizing" software?
Peer-to-peer or torrent downloading software?
Backup software that came bundled with an external hard drive?
Online backup schemes other than iCloud (Carbonite; Google Drive; MS One Drive?)

Hello, i purchase from the web adobe acrobat pro for win instead for Mac how i can change the order ? Thank you

I need to change my order but i don't understand how to contact acrobat in rodder to do this, Actually i've Acrobat pro for win but i need the one for Mac
Tks
Franz

If you purchased it from the Adobe Store on the web then you need to contact Adobe. If you purchased it from another party on the web then you need to contact that third party vendor.

Finder will not open my photos folder. It gives me a number -600 after the statement! It was all of the sudden!, Finder will not open my photos folder. It gives me a number -600 after the statement! It was all of the sudden!

Not sure what has happened but all of the sudden!! I cannot open and folders in Finder... It says " The application "finder" cannot be opened" -600
Help!!

Reboot and try again.

My ipod touch will not turn back on and i do not know why. I read the discussions but didnt anything work for my ipod . Someone Pleaseee Hellppppppp !

I Really Need Someone To Help Me Fix My Ipod I Would Highly Appreciate It

Try here > iPod touch: Frozen and unresponsive

My iPhone will not sync completely. All of my audiobooks are only half downloaded. after the first chapter there is just silence. I've removed and reinstalled them and still the same thing.

Ive also tried to unistall them and get them directly from iTunes on the phone again and iTunes wants me to pay for them again. Very upsetting because they were not cheap to begin with like 10 bucks a pop. I'm going crazy someone please help me

Same here. Things were working fine before the update.
I tried to turning on and off the option of IOS devices, it doens't seem to work

Trying to update APP on husbands iphone 4 and getting a message..*This Apple ID is only valid for purchases in the USA store. You will be switched to that Store..Try your puchased again.*...Nothing happens...We live in Sweden but use the USA Store.

Trying to update APPS on the husbands iphone 4 and getting a message stating that these purchases are only allowed in the USA store..We live in Sweden but have an account USA...My phone works fine...Try to change account back to Sweden but it states that we have unwatched rentals...which we dont have..
Confused...Suggestions?
Thanks
David

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

Similar Messages

Maybe you are looking for