Withholding tax @ time of Invoice not available in DMEE struture table

Hello DMEE Experts:
facing some issue in DMEE
I need to capture withholding tax amount @ time of Invoice in DMEE output as far as my knowldge invoice level details doesn’t get copied to DMEE structure table (FPAYHX, FPAYH and FPAYP).
Expected DMEE output:
Indicator
Payment document
BLNR
Gross BLNR amount
Withholding tax amount
Net amount
D
200000006
0010078629
I
200000006
1600000029
1000
8.93
991.07
I
200000006
1600000030
1500
13.39
1486.61
I
200000006
4600006397
650777
650777
I
200000006
4600006398
650777
650777
I
200000006
4600006407
650777
650777
T
1600000029
39
0
0
893
T
1600000030
39
0
0
1339
as per above expected output every invoice applicable for withholding tax @ time of invoice same is get repeated in tax line item (T) i.e next level
I am new to DMEE can anybody help me how to meet this requirement specially how i can arrange level so that all respective invoice get repeated which fall under single payment document.
Some more input
D line items for Vendor Payment line items details
I Invoice level details like BLNRS
T Line stand for tax line item on respective invoice
Thanks
Pankaj

Hello Exper,
can anybody help on this, i need to deliver this DMEE tree ASAP
Thanks
Pankaj

Similar Messages

Withholding tax for vendor invoice

Hi ALL
When we post vendor invoice for few invoices we need withholding tax and few invoices withholding tax is not required. where to make configuration settings to resolve this.
Thanks in advance
Regards
Prasad

Hi Meenakshi,
Whenever you are posting the vendor invoice you have the option to select tax tap. If suppose you are not selected this tap, tax wont be calculated for the particular invoice. Accordingly Tax is applicable for all the vendors at the time of invoice hence, in your case few vendors you dont need for tax deduction.
Why? do u have any exemption certificates for the particulars vendors.
Every vendor having unique tax code number according to their business nature. Like 194 J, 194 C, 195 thease categatory has been divided according to the Income Tax Act.
If you have any further clarifications please let me know.
Regards,
Sivakumar Sathiyamoorthy
+91-9916131375

Withholding tax type FE is not defined for country MY

When I assign cocd to Fe (Withholding tax type for us-1099 fedral withholding tax) to us and unit 100.
i get an error Withholding tax type FE is not defined for country MY..
pls help

Hello Prajay,
You should first search in SCN before posting your queries. Most of your issues will be resolved.
Anyhow for this., you Need to create a Withholding tax type for the Country wither for Invoice posting or for payment posting.
The same can be maintained at the following path in SPRO.
SPRO-->> Financial Accounting -> Financial Accounting global Settings --> Withholding Tax --> Extended Withholdingtax -> Calculation --> Withholding Tax type.
Here create the Withholding tax type for Invoice posting or Payment Posting.
BR
Amitash

HT201342 Hi , I want ask you about imessage some time my account not availability and signal for calling some time no signal on my iPhone only search the signal , all pra

Hi , I want ask you about imessage some time my account not availability and signal for calling some time no signal on my iPhone only search the signal ,

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

How to find if Classic Withholding Tax is Active or Not

Hi All,
How to find if Classic Withholding Tax is Active or Not for a company code. It is a U.S. company code.

Hello Kumar,
You can use tcode SE16 and view V_T001_EXT to check if extended withholding tax is active or not, for each company code.
or if you prefer, use SE16 and table T001. Field WT_NEWWT.
If extended is not active, then classic is used.
Regards.

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

RUN_LOGIC:Accounts are not available in the rule table

Dear BPC gurus,
I experience the following error while trying to run a Business Rule (Account transformation). Setting are to change the flow dimension of an account and apply to YTD.
Script logic that is used is:
*RUN_PROGRAM CALC_ACCOUNT
CAT = %CAT_SET%
TID_RA = %AAL_TIME_SET%
*ENDRUN_PROGRAM
The following error occurs:
RUN_LOGIC:Accounts are not available in the rule table
Failed
Application: FORECAST Package status: ERROR
All input is welcom.
Thanks and regards,
Vincent

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

Withholding tax line items are not post

Hi,
I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
and the i am used to post an vendor invoice
given all required feild and press enrer and display the withhoding tax codes screen here also press enter button .... i entered all required field and go to simulation this posting i am getting only 2 line items
like for eg: --- Inventory Debit , Vendor Credit only
here my problem is i am not getting the all with holding tax line items
please hepl
Sree

Dear Sree,
if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
Please check.
Mauri

In F-53, the Withholding tax line item is not geting calulated

Hi All
I have created a tax code for payment.
while making payment through F-53, i dont see a sepreate line item getting created for for Tax(Withholding)
When i double click on the vendor line item and check on the Withholding tax option box, its shows as below
Tax code: w3
Tax base: 15000
Tax amount is 0(Zero)
can you please advise which setting i have missed

Hi Priyanka,
TDS is calculated at the time of Invoice or payment whichever is earlier..so if it is not getting deducted at the time of payment it is absolutely correct, until and unless it is not Advance payment.
Even then if you want to know why....go to FK02>Witholding tax tab> the tax Code for Witholding Tax type for Payment must be blank. Check that..
Regards,
SAPFICO

Withholding Tax by Line Item (not by vendor)

Hi,
Thereu2019s been more than 1 occasion where clients request for withholding tax at line items (purchase equipment and service in 1 invoice. Equipment no withholding tax but service has withholding tax). However, as far as I know, the withholding tax is applicable by vendor and not by line item of the vendor. Is there any workaround on this?
Regards,
Cheah

If i understand correctly, you have prepared PO for material plus service, service attracts WHT
you could prepare two different vendors - one for material, one for service - even though the vendor is same, and maintain WHT only in service vendor.
under PO there is condition types for service, there you can enter this second vendor who is providing service.
i think this way you issue should get resolved.
Pl share how to finally got thru it.
Thanks
Sanjay

Calculate Withholding taxes for VEndor Invoices using ABAP program.

Hi All,
I have to upload Vendor Invoices using FB60/Fb01 tcodes. I am able to post the Invoices using FB01/Fb60
but I have to calculate extended withholding taxes also using this program for the Invoices.
Is it possible to upload vendor Invoices and calculate withholding taxes using Program?
If yes,
Does anyone has any idea how do you calculate extended withholding taxes using any BAPI's?
I have used these two BAPI's
BAPI_ACC_DOCUMENT_POST
BAPI_acc_invoice_receipt_post
they are working fine but without withholding tax.
This is a requirement for country India.
Regards,
Sushil

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Handling withholding taxes for each invoices in DMEE

Hi,
I am doing DMEE(out going flat file) for argentina.
I need to dispaly alll wihthold taxes for each invoices.
Can any one know how to Process multiple line item in DMEE tree.
Here i am using Exit function.
I got all withholding items one table ,But how to i dispaly these item for each invoices.
This should look like this.
Header
Item1
Item2
Withhod tax1
withhold tax1
item1
item2
Withhod tax1
withhold tax1
Withhod tax3
Thanks,
Bala
Edited by: bala chandran on Dec 29, 2009 1:45 PM
Edited by: bala chandran on Dec 30, 2009 11:27 AM
Edited by: bala chandran on Jan 4, 2010 8:56 AM

Hi,
check this OSS Note:
https://service.sap.com/sap/support/notes/1286713
Best regards.

Wong calculation of Withholding Tax on vendor INvoice

Dear Cheetaz,
In Pakistan rate of withholding tax on freight is 2% and same has been updated in vendor master record. As i am going to make payment to vendor through t ocde F-48 , system is calculating tax @ 1.98% instead of 2%
kindly advice where should i make changes in SPRO so that system claculate tax amount at the rate specified in vendor master records

Hi,
IMG > Financial Accounting > FA Global Settings > Withholding Tax > Extended WT > Calculation >
Withholding Tax Code
Define WT codes
Here WT codes (i.e. rates, etc) are defined for each WT type defined earlier.
F Note: A business transaction can be assigned only one WT code per WT type. If more that
one code (rate) has to be applied, these must be represented by different WT types.
Activity :
WT type                          WT code
W1                                  W1                    Sec194 - Contractor TDS
% subject to tax             100%
posting indicator             1                       i.e. standard posting u2013 bank/customer/vendor line
items reduced
WT rate                          2%
Income type                    SEW1
Define formula for calculating WT
regards,
Sanju

Time machine - disk not available

Dear guys,
i've installed osx server on an iMac in my lan, and I activate TimeMachine service on an usb Lacie 500GB.
On my macbook pro (osx lion) I've opened time machine, in disck menu window I've selected time machiene network disk on server and backup start without any problem.
On a second macbook pro (osx mountain lion) I've do same operations but when beckup start I have as error message "Back Up Disc Not Available". I have update disk name, disabled and re-enabled time machine, mount disk with cmd+k and changed disk in time machine but I still have the same problem.
On a third iMac (osx lion) i have the same error, seems that backup works only on my personal macbook. Can anyone help me? any ideas?

I have four macs using time machine on a single 1TB drive connected to Airport Extreme through USB. This morning I got the dreaded error-109 on Mac#1. This occured right after I had added Mac#4 to the bunch. While adding the Mac#4, I mounted my airport disk and then used time machine to select it for backup. I forgot to eject it after it had done the initial backup. That was when the error occured on the Mac#1.
Mac #1 C2D Mini 2009 SL 10.6.2
Mac #2 G5 DP L 10.5.8
Mac #3 MBP 2009 SL 10.6.2
Mac #4 MB C2D2006 SL 10.6.2
First I turned off TM on all of the Macs. I mounted the airport disk again, on Mac#1. I deleted the sparsebundle for Mac#1. I opened TM and selected the airport disk for backup. It is now backing up again on Mac#1. When it is finished, I will turn on TM once again on the other macs and see what happens. There is still a chunk of space left on the airport disk, about 680GB after all of the backups

FB99 check archiving status - Withholding tax life (455 days) not reached

Hi to all,
We are in process of archiving SAP data.
Requirement: There are 2 company codes in one production client and we want both company codes to be separated as independent clients. So we are archiving one of the company codes in existing client.
Since we want separate clients & require only one company code data in each client, we want to archive all the documents as on date.
I am archiving FI documents through Archiving Object FI_DOCUMNT in SARA transaction. Before archiving we have to clear all open items for the FI documents, for that am checking document archiving status through FB99.I am getting following message for one of the line item
u2018Withholding tax life (455 days) not reached u201C.
I have set document life (OBR8) and account type life (OBR7) form 9999 to 1 day.
Regards
Govind

Hi Govind,
The document life and acount type life is not the same as the withholding tax life. The witholding tax life is country-specific and cannot be overridden. I do not believe there is a way around this.
Best Regards,
Karin Tillotson

Withholding tax @ time of Invoice not available in DMEE struture table

Similar Messages

Maybe you are looking for