Work schedule shows a holiday but it is not defined

Hi All,
I have run PT03 to check on my work schedule and it shows a date that is a holiday. I have checked the public holiday calendar and no holiday defined on that day. Checking again on the generated work schedule and clicking on the date where it says as holiday (though not defined in holiday calendar) it pops a message "Calendar not loaded on 21.05.2010". Normally when you double clicked on the date when there is holiday it is displayed beside holiday class field the description of the holiday but this one it does not show any description beside that field.
Hope you can help me on this.
Thank you in advance.

Hi alvin zamora,
One more thing, if you have removed a holiday from the holiday calendar after generation of work schedules, you need to generate the calendar again after removing that holiday, and also generate the work schedule using that calender and save the work schedule, then only you will see the removed holiday effect in the work schedule.
Regards
Venu

Similar Messages

Landed Cost manager Program is scheduled to run everyday but it did not run

Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
Thanks
De

1006390 wrote:
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

My ipod touch 4 gen is showing headphones in but they are not

My ipod touch 4 gen is showing headphones in but they are not.plz help me

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ?

video transfer from computer
         Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ? sync automatically downloaded some - but was a bit prejudiced and selective with content mainly all edited by me in Moviemaker (windows 7, probably the reason)
         I use technology since neanderthals roamed the planet . ....don't quite understand all the nuances . .. .So, my all things "i" (apple/mac) guru has arranged a meeting,    and I'm impatient. I know some of my videos are in several formats, etc... and I don't quite understand the differences . ...to me, it's complicated, as Alec Baldwin would say.
        Unfortunately, I'm "late" to the game metaphoricaly ( windows vs apple/mac ). I have a couple ipods and actually endorse the ijet remote device (Co. from San Diego). I have pro tools and other hi tech gear in the pro keyboards/sequencing arena where I've been writing computer music since 80's and it's evolution.

The Apple video app is very limited in what it will play. If you have multiple video formats and if they will play on an iPad, then you likely need a 3rd party vidoe app. One such is BUZZPlayer which is available in the iTunes App Store on a Mac or PC or from the App Store app on an iOS device.
You transfer the videos to 3rd party video apps using iOS File Sharing.
http://support.apple.com/kb/ht4094

I buyed a new computer and photoshop was not working anymore, I reinstalled it but it does not accept my serial number

I buyed a new computer and photoshop was not working anymore, I reinstalled it but it does not accept my serial number@

What message do you get when you try to activate it?

My Ipad works very well by itself but it's not recognized by Win 7 and Itunes on my PC and my PC's wife.

My Ipad works very well by itself but it's not recognized by Win 7 neither Itunes of my PC and my PC's wife.
The Ipad of my wife is well recognized on my PC which means my PC is OK.
I restored everything of my IPAD but when I connected it to Itunes of my PC nothing happened.
What does that mean and what to do ?

See if this link helps: http://www.apple.com/support/ipad/assistant/itunes/

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Shows as installed, but it's not

Muse and Lightroom show as installed. But they, in fact, are not.
This likely stems from the way I initially set things up. I was using my traditional licensed software but have now signed up with the cloud account. Muse and LR installed but everything had to be uninstalled due to constant crashing. So I took everything off, thought I scurbbed my machine clean of all things adobe.
Now on reinstall, these two programs show as being installed but they are not. Other programs are installing fine and working well.
Thanks for help in clearing this up.
By the way, I'm on a Mac OS. 10.7.5 on a mid 2010 MBP
Brent Bergherm

Thank you. while this did not directly help the situation, I did stumble upon the solution.
In the Applications/utilities/adobe installers folder there were the "uninstallers" for each application that is recognized by the application manager. I ran these uninstallers and it worked, even though for Lightroom it showed only having about 4KB of information to delete. Regardless, it cleared the problem and all is now stable.
Brent

Adobe Flash player (I ran scan & got "You have version 9,0,45,0 installed") works on internet explorer emails, BUT it does not work using firefox keeps giving me a pop up need Flash 9 or higher.

I have Adobe Flash player 9 or higher (I ran your scan-You have version 9,0,45,0 installed) and it always works with Internet Explorer emails BUT every time I click to open incoming email I get a pop up "need to install flash 9 or higher". What can I do? Can I get rid of it? It only happens in internet mail.
Pat

Visit [http://get.adobe.com/flashplayer/ this Adobe page] with both browsers to update your Flash version; Firefox uses a different install than IE, so having one doesn't mean you have the other.

TS3899 My emails are showing as 'read' but they are not read! How can I rectify this problem?

My emails suddenly keep showing as 'read' but they are unread. How can I rectify this problem?

Is the folder pane collapsed? View(or AppMenu/Options)/Layout/Folder Pane. Otherwise, deleting foldertree.json might fix it:
http://kb.mozillazine.org/Toolbar_or_windows_layout_not_working

I have installed CC and a member. Why InDesign is not updated to the current version 10.1. It is showing is updated but it is not

I have CC on my computer and it shows InDesign is updated.... but it is not to version 10.1. I bought files from office and now I can't open. Why?

Without proper system info we can't tell you much. Could be that your system does not meet the requirements and thus the latest version cannot be installed...
Mylenium

Alerts in MOSS 2007 Not Working Correctly: Email is delivered, but content is not included in the email.

A user is receiving an alert on a list when anything is modified, but the alert is just a blank email. Anyone experience this behavior before?

Ben,
Thanks for taking the time to reply, but this is not the problem we are facing.
You can open the email without a problem, but the content inside the alert is blank - the list, the columns that have been modified, nothing is in the email.
In addition, our client does not run Exchange in their environment.
- Ben

HT4623 I have iPhone 4S. I am not getting wifi. Upper left corner shows all bars but also 3G not wifi icon

I have iPhone 4S not getting wifi signal ever. Even though I'm showing all bars

If it shows 3g icon means you have not connected to wifi. Go into settings > wifi and tap on your home wifi/wifi network that you are wanting to connect to. Put in the password if that network requires one and then you will have a wifi symbol instead of 3g.

Work schedule shows a holiday but it is not defined

Similar Messages

Maybe you are looking for