Write a PDF using FTP

Hi people,
I have got a tricky question. How can i write a PDF to a target destination using FTP? It seems easy but i have got same constraints, which are:
1 - I will get data from PDF in one string element (xstring in R/3, base64Binary in PI 7.0), that i get from an RFC call.
2 - I can not have anything from this PDF in monitoring, string or PDF file. (A must be)
3 - I can't add any beans. (I am not allowed)
4 - I can´t write or keep this PDF file in a PIs UNIX machine directory. Neither R/3 can do that. (We are not allowed)
5 - I am not allowed to change stuff in J2EE engine, or any kind of engine. Can't add/change adapters either.
You may ask, what can you do then? Well, i can write code for mappings. And put that mapping anywhere it fits, taking in consideration the 5 constraints above.
Is ABAP mapping a solution? Is it possible to write code in ABAP without saving PDF file in a directory?
Ideas, who can give me some?
Thank you for you attention,
Pedro Pereira

Hi Pedro,
I'm not sure if you can avoid msgs being monitored, but you can definitely avoid a user from seeing it.
In the S_XMB_MONI authorization object, you can define the access level for the users in the monitor by parameters like component, party, interface name etc.
By default, it's probably "*" but you could limit access of all users to this message.
Other than that, try to set the TRACE lvl to 0 in SXMB_ADM.
Regards,
Henrique.

Similar Messages

How to Write a PDF using File Adapter

Hi All,
Can anyone please let me know how to create a PDF file at the receiving end using a File Receiver Adapter. The source is an XML file. The scenario is as follows.
XML-File ---> XI --->PDF-File.
Any help would be highly appreciated.
Thanks in Advance
Anil.

hi ,
if u r using pi7.1 you can use agents concept.
please find the links.
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm
How to get started using Conversion Agent from Itemfield
More on the SAP Conversion Agent by Itemfield
Integrate SAP Conversion Agent by Itemfield with SAP XI
Conversion Agent a Free Lunch?
How to get started using Conversion Agent from Itemfield
https://websmp102.sap-ag.de/~sapdownload/011000358700001090982006E/ConvAgentDocSP16.zip
https://websmp102.sap-ag.de/~sapdownload/011000358700004921152005E/ConversionAgent.pdf
XI: Generate PDF file out of file adapter
XI: Read data from PDF file in Sender Adapter
The specified item was not found.
regards,
navneet

How to write special characters in PDF using iText

How to write special characters encoded with UTF-8 in PDF using iText.
Regards,
Pandharinath.

I don't know what your problem is but that's almost certainly the wrong question to ask about it. Java (including iText) uses only Unicode characters. (You may consider some of them to be "special" if you like but Unicode doesn't.) And when it does that, they aren't encoded in UTF-8 or any other encoding.
So can you describe your problem? That question doesn't make sense.

Upload PDF to DMS using FTP server in WD abap

Hi Friends,
I want to upload PDF file from presentation server to DMS. As I dont want application server in this regards , so am using FTP server instead. But the problem am facing is in WD abap the filepath is in XSTRING format. So how to upload Xstring pdf file in FTP server and how can i pull the same data to DMS server.
My problem is just how to upload PDF in FTP server using web dynpro abap. The FM 'BAPI_DOCUMENT_CREATE2' will upload the same PDF file from FTP to DMS server.
Regards,
Santosh

Hi Santosh,
Are you using FILE UPLOAD UI Element or not?
Please go through this.. it might helps
Re: File Upload Using BAPI
/people/shruti.rathour/blog/2008/02/07/uploading-sap-interactive-form-on-the-abap-webdynpro-view
Re: FTP_CONNECT failed for SAPFTP from WD4A to external Server
Cheers,
Kris.
Edited by: kissnas on May 3, 2011 7:15 AM

I don't understand. I use Google Docs to write letters & other forms, then convert them to PDFs using Adobe Acrobat. If Forms Central closes, will I still be able to do this?

I don't understand. I use Google Docs to write letters & other forms, then convert them to PDFs using Adobe Acrobat. If Forms Central closes, will I still be able to do this?

Adobe also has Acrobat.com and there is DropBox.com. Adobe has also announced Adobe Document Cloud.
Forms central provide a subscription service for users with Reader to create simple forms. Apparently this did not meet a majority of users and with the minimal price difference for Acrobat and free web storage the users were better served without it. I expect cloud services will continue to emerge until providers better and more fully understand the user requirements.

Convert smartform output in to PDF using CONVERT_OTF function how to do it

Hi Anil , and Hi All
         I am trying to display smartforms output in java webdynpro
         for that i have got the following code in sdn.
           can anybody please clarify these doubts in the below code
           1) What are the mandatory input and output parameters
               I have to pass here in this code to my application
           2) please check my previous post also in this regards please
   . Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@end

Hi
    ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar

How to read the and Write the PDF file give me the solution

Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
     public static void main(String a[])
          try
          PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
               reader.open(); // open the file.
               int pages = reader.getNumberOfPages();
               for(int i=0; i < pages; i++) {
               String text = reader.extractTextFromPage(i);
               System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
               writer.open();
               writer.addImage("C:\\sam.doc");
               writer.close();
               System.out.println("DONE.");
reader.close();
          catch(Exception e){System.out.println("error:"+e);
          e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.G

I have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much!

Trying to use FTP to get data from a different server

Hi Friends,
    I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
   Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = V_PASSWORD
      SOURCELEN   = V_PWD_LEN
      KEY         = CS_KEY_500098
    IMPORTING
      DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = 'test'
      PASSWORD        = V_PASSWORD
      HOST            = '176.0.1.6'
      RFC_DESTINATION = 'SAPFTPA'
    IMPORTING
      HANDLE          = MI_HANDLE
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = MI_HANDLE
      COMMAND       = CMD
    TABLES
      DATA          = MTAB_DATA1
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3
      OTHERS        = 4.
IF SY-SUBRC = 0.
    LOOP AT MTAB_DATA1.
      WRITE: / MTAB_DATA1.
    ENDLOOP.
ELSE.
    CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
    WRITE: / ERROR.
ENDIF.

Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ).     -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = S_PWD
      SOURCELEN   = DSTLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = P_USER                   -
> Username
      PASSWORD        = S_PWD             -
> password
      HOST            = P_HOST                  -
> Host
      RFC_DESTINATION = P_DEST         -
> Destination
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'set passive on'
    TABLES
      DATA          = RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE1
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME1
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE2
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
      EXPORTING
        DESTINATION          = P_DEST
      EXCEPTIONS
        DESTINATION_NOT_OPEN = 1
        OTHERS               = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " FTPCON
Hope it helps.....

How to copy file to another server from database using FTP in oracle

How to copy file to another server from database using FTP in oracle.
Please do the needfaul.

Billy Verreynne wrote:
BluShadow wrote:
Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
:)

File format while sending a file using FTP Process

Hi,
I am facing a formatting problem when i send a file from SAP application server to a different sever using FTP process.
The problem is like this:
Lets say I have a file with 10 records on the application server. When i am downloading this file to a pc, the file is showing 10 lines.
But when i open the same file on the other server it is showing 10 records as 1 line.
The file i am sending is a text file.(ex: acc_payable.txt)
If i open the same file on the other server using word pad it is showing 10 records in 10 different lines.
I want the file to be opened using notepad and want to see the each record in a different line
Can anybody help me on this issue
Regards,
Radhakrishna

Another stab at "simplest": can you avoid embedding
newline characters in the strings
your write and reply on PrintWriter's
println() methods instead?But, if I understand the OP, this will cause the same problem. He is running on Unix but wants to generate a DOS type eol. The println() method will use the OS default; therefore, he needs to explicitly specify the DOS eol.

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

How to use FTPS using FTP adapter

I am trying to create one BPEL process using SOA 11g 11.1.1.4, which will put file on remote location using ftp adapter. I have created JNDI properly and using wallet.
useFtps= True
walletLocation= correct path of wallet created in Oracle HTTP Server(OHS)
walletPassword = walletPassword
host = ipaddress
username = myUsername
password = myPassword
For all this I have followed http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABEBGGD
Now, whenever I try to test that BPEL process it gives me error:
"Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error in establishing SSL session. Error in establishing SSL session. Unable to establish SSL session on control channel. Reply String: 530 Please login with USER and PASS. Reply Code: 530) Please correct the setup for SSL. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution"
Any suggestion or resolutions are welcome.
Thanks!!
Regards
Yogesh

Hi,
When you configure the Connection Factory for FTP Adapter in Admin Console, provide the following values for the attributes like the hostname, username, password, port and the path of remote location as where
you want to write the file in remote Server i.e., ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path). If you are writing to a remote FTP server you need to create a Connection factory for that as above.
Please try this and let me know...
Thanks,
N

Error in Rcvr File Adapter using FTP ?

Hi @,
I am getting the follwoing error while trying to put file in the folder thru Rcvr File Adapter using FTP and it is giving me following error :
java.io.FileNotFoundException :(Permission Denied )
I have verified the permissions on the folder and it is having write permissions.
Please suggest Its urgent.
REgards

hi amit,
can you
1. check whether the access to FTP is Authenticated, if so provide the username and password
2. try giving different file name at the receiver end
3. try normal ftp commands to access the folder
regards
Ramesh P

Why is Merge into single pdf using InDesign CS3 and not CS4 ?

I'm new to this so the question may be trivial, but it beats me:
I've created some InDesign files in CS4 and want to combine them into one PDF. So I opened Acrobat 9 Pro and
navigated to "Merge files into single pdf". I chose the CS4 InDesign files to Add and clicked the Combine Files button.
BUT, this starts up InDesign CS3 and not InDesign CS4 and returns a pop-up saying "unidentified error".
Why is starting CS3 InDesign and not CS4, and what is the "unidentified" error ! ?
As background I intially installed CS3 and then updated to CS4, leaving the CS3 applications intact. When I initially
bought CS3, just before CS4 was released I may have created pdfs from InDesign as an experiment, but it is possible I have not done this
since upgrading to CS4.
Thanks for any help

Thanks Michael, I was not aware of quality issues. Actually this is not really significant for my usage this time. What I'm doing is just using ID to capture notes/images/links etc in several free format ID documents. I then planned to merge them quickly into one pdf using Acrobat. I can easily shuffle the file order around to create a handy portable pdf reference document with the Merge feature.
Doing something similar from ID seemed to me to require me to create pdfs for each ID doc and them to merge them in Acrobat. I did start to write a simple script to do this in ID, but I then realised that I wanted the ordering to vary and the ID files would likely to change. Then I found the merge and bingo, that solved it..... Well it solved it on another CS4 installation that had never seen CS3, but not on my machine which had been upgraded from CS3.
I tried looking in the registry for obvious entries that might point Acrobat to use ID CS3 rather than CS4, but couldn't spot anything. I wonder if there is something buried in there ?
Thanks again for helping
Regards.

Password Protected PDF using iTextSharp

hello
i create pdf files using iTextSharp in vb.net .
i did it but now i need to create these pdf files as password protected and i can't find any method for this,
how can i create password protect a pdf using iTextSharp ?

That is better suited to itextsharp support, I don't think it is a vb net issue.
Edit, here is a sample:
Imports ITextSharp
Imports ITextSharp.text
Imports ITextSharp.text.pdf
Imports System.IO
Imports System.Text
Public Class Form1
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
Dim doc As New Document(ITextSharp.text.PageSize.LETTER, 10, 10, 42, 35)
doc.AddAuthor("Jerry O'Brien")
doc.AddCreator("The Creator")
doc.AddSubject("ITextSharp Sample")
doc.AddTitle("A treatise on the production of Portable Document Format files")
Dim writer As PdfWriter = PdfWriter.GetInstance(doc, New FileStream("D:\sample.pdf", FileMode.Create))
Dim Upass As String = "MumboJumbo"
Dim OPass As String = "HeebieJeebie"
Dim userpass() As Byte = Encoding.ASCII.GetBytes(Upass)
Dim ownerpass() As Byte = Encoding.ASCII.GetBytes(OPass)
writer.SetEncryption(userpass, ownerpass, 255, True)
doc.Open()
Dim para As New Paragraph("This is my first paragraph")
Dim pharse As New Phrase("This is my first phrase" & vbNewLine)
Dim chunk_ As New Chunk("This is my first chunk")
doc.Add(para)
doc.Add(pharse)
doc.Add(chunk_)
doc.Close()
End Sub
End Class
FYI - I have NO IDEA what the 255 and True mean, I just put something in there that fit.

Write a PDF using FTP

Similar Messages

Maybe you are looking for