XML to IDOC : Hierarchy mapping help needed

Hi All,
I am trying to complete graphical mapping for an XML to IDOC structure. Both structures are EXACTLY same, but data is not populating in IDOC as desired.
My incoming XML structure and IDOC structure is
Header
Data_header (1 -- 999)
|_Data_item (1 -- 3)
Trailer
If I have only 1 header, then IDOC data is populated correctly.
But when I have multiple headers and theer items, the Headers are getting populated, but items do not get populated correctly.
*Example My Input is:*
Header
Data_header
|_Item_1
|_item_2
Data_header
|_item_3
Trailer
My output is (IDOC)
Header
Data_header
|_Item_1
Data_header
|_Item_2
Trailer
As seen above Item3 of Data_header2 has gone missing._
For Data Header, I am using REMOVE_CONTEXT function and for ITEM I am using SPLITBYVALUE. Thought this should have helped, but am struggling.
Any tips, help, greatly appreciated.
Many thanks
Shirin

Hello,
Have you done one to one mapping, as u mentiong they are exactly same..
if that's the case, then mapping test should be successful.
If there is any diffrence in occurences of target structure or any other difference and let me know.
If possible send me the target structure...
Regards,
Sreenivas.

Similar Messages

Idoc field mapping help needed

Hi xperts,
Am doing some simple mapping, but, facing context issues,
Source                                                       Target
(level 1)-FIDCC2X                                                (level 1)-ACC_DOCUMENT03
(level 2)--IDOC                                                  (level 2)--IDOC
(level 3)---EDI_DC40                                             (level 3)---EDI_DC40
(level 3)---E1FIKPF                                              (level 3)---E1BPACCR09
(level 4)----E1FISET                                             (field    )----AMT_BASE
(field    )-----H2BAS( should be mapped to AMT_BASE, when
                                   an CR09 segment is cerated)
Tried alternative options with remove_contexts & splitbyvalue.
CR09 segment is being created, But, field is not being mapped.
Any ideas, what is the correct mapping steps.....
-santosh.

Hi vkjoat,
it seems quite simple, but causing problems due to context issue.
CR09 segment is created in my test case, but value from E1FISET-H2BAS is not being populated in E1BPACCR09-AMT_BASE.
Unable to figure out the context issue.....
Cardinality of   mapping is 1:1 .
-thx.

Graphical mess-mapping help needed: select single segment from many

Hi All,
I am sending a standard PO IDOC from R/3 and converting it into a file before sending to 3rd party.
The IDOC used is ORDERS.
In this IDOC segment E1EDK14 gets repeated in R/3 and I want to use the value of 009th occurance (E1EDK14 009) to map my values.
When I look at XML, it looks as follows
<E1EDK14 SEGMENT="1">
 <QUALF>014</QUALF>
 <ORGID>AB1</ORGID>
 </E1EDK14>
 <E1EDK14 SEGMENT="1">
 <QUALF>009</QUALF>
 <ORGID>CD1</ORGID>
 </E1EDK14>
 <E1EDK14 SEGMENT="1">
 <QUALF>013</QUALF>
 <ORGID>AA</ORGID>
 </E1EDK14>
 <E1EDK14 SEGMENT="1">
 <QUALF>011</QUALF>
 <ORGID>GDE</ORGID>
 </E1EDK14>
I need to get the ORGID value of 009th segment( i.e when QUALF (above) has value '009'.
I tried to put a simple if condition in mapping (if qualf = 009-->then get ORGID), but it does not work.
Can you help.
Many thanks
Shirin

Thanks Prakasu,
I tried it again, but it is picking the first segment value and not the 009th one.
Many thanks
Shirin
Edited by: Shirin K on Oct 24, 2008 10:56 AM
Edited by: Shirin K on Oct 24, 2008 11:00 AM

Message mapping help needed

I am trying to map target based on a condition. Meaning I want to map E1EDKA2(1..99999) of DESAD01 Idoc to ShipTo(0..1) node if E1EDKA2-PARVW = WE.
I tried all the variations with creatIf and formatByExample but I couldn't able to get it working.
Here is the target XML structure
<Delivery>
 <Header>
 <ShipmentNumber>1234</ShipmentNumber>
 <BOLNumber>ABDC</BOLNumber>
 <ShipTo>
 <Name>XYZ</Name>
 </ShipTo>
 <SoldTo>
 <Name>XYZ</Name>
 </SoldTo>
 </Header>
 <LineItems>
 </LineItems>
</Delivery>
Thanks
Suman

Hi Sarvesh,
I don't know what is the significance of checking 1 = 1. Anyway I could able to resolve the issue by my self. Thank you very much for taking time to help me.
/ns0:MT_XML_Delivery/Delivery/Header/ShipmentNumber=/DESADV01/IDOC/E1EDK07/VBELN
/ns0:MT_XML_Delivery/Delivery/Header/BOLNumber=/DESADV01/IDOC/E1EDK07/BOLNR
/ns0:MT_XML_Delivery/Delivery/Header/ShipTo=createIf(stringEquals(/DESADV01/IDOC/*E1EDK08*/E1EDKA2/PARVW, const(value=WE)))
/ns0:MT_XML_Delivery/Delivery/Header/ShipTo/Name=replaceString(/DESADV01/IDOC/E1EDK08/E1EDKA2/PARVW, /DESADV01/IDOC/E1EDK08/E1EDKA2/PARVW, /DESADV01/IDOC/E1EDK08/E1EDKA2/NAME1)
/ns0:MT_XML_Delivery/Delivery/Header/ShipTo/AccountNumber=/DESADV01/IDOC/E1EDK08/E1EDKA2/PARTN
XI/PI is really strange. It needs to have that PRVW in the first field mapping, even though it is not being used. I just replaced PARVW with the NAME1 and mapped to name. For the ShipTo, I set E1EDK08 (next higher level structure) as the context.
I think it will take time for me to learn this, as I come from webMethods and XSLT background.
Thanks
Suman

ABAP MAPPING:Help needed

Hi Friends,
I have a scenario where I need to pick up Idocs out of a packet of Idocs .The Idocs will be picked by checking for a certain condition for the Idoc Segement and of all the Idocs the Idocs which satisfy a particular condition should only be output and for this I have been asked to achieve this using ABAP Mapping.So any info in this regard would be of great help for me.
Packet of Idocs----
> Idocs satisfying the cond.
(sender)*********(Check for a condition)*****(Receiver)
Please do provide with me a sample coding if possible.Please take up this with some priority.
Thanks & Regards,
Pradeep.

Hi All,
The output from the ABAP class needs to be transformed into a different message using Graphical Mapping .
Please provide me some inputs for creating this ABAP mapping.
Thanks & Regards,
Pradeep.

Value Mapping -- Help needed.

Hi experts,
I have a scenario ,
I have 2 fields in my source structure and based on these two fields,i need to fetch 8 field values from a table to map into idoc control record.
The table might be in SAP or in Legacy
If it is a Ztable in SAP, how can I achieve this?
If it is in Legacay , how can I achieve this?
My client told us to do this through Value mapping?
Please help me in acheiving this.
Thanks in advance.
Regards
Krupa.

Hi,
Use the RFC Lookup API to call an RFC from the mapping and get the values from the Table in the R3 system . Look into this document by Michal to understand RFC lookup,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Else, use value mapping as shown in this blog,
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
Regards
Bhavesh

Reg: File to Idoc Hierarchial mapping

Hi Experts,
We have a scenario of flat file to idoc where in we have 4 segments(01 to 04)(with hierarchies) in source file to be mapped to idoc. We have followed Riaz blog http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-structures-using-only-graphical-mapping/.on mapping flat file to deeply nested structures .
We have encountered one unique issue in the intermediate level mapping where, when assigning hte id numbers, the instances of one segment are grouped together. This is creating a problem.
Ex: in source str we have nodes in the order
01
02
03
04
02
03
04 and so on..
After the test of intermediate mapping, it shows teh follw sequence:
01
02
02
03
03
04..
The node seq in the target str should have been similar to that of the source.. but here its not so..
if i am using just one instance of 01 till 04 nodes.. the final xml str is created perfect.. Can any please let me know what could be the possible error??
Or please let me know if there is any other simple procedure to finish this.
Thanks in advance, awaiting your reply..
Best Regards,
Giri

Hi,
Please go through the following links..
http://wiki.sdn.sap.com/wiki/display/XI/SampleJAVAMappingcodeusingPI7.1+API
http://wiki.sdn.sap.com/wiki/display/XI/UsingPI7.1APIforJavamapping
and also,
http://help.sap.com/saphelp_nwpi71/helpdata/en/bd/c91241c738f423e10000000a155106/content.htm
If u get any doubt u can post the problem....
Babu

XML Publisher Multi tab Report: Help needed

Hi,
I have a requirement like below--
Need to develop master detail XML Report in R12. O/P will be in excel.
Excel output having two Work sheet.
Some columns data must be non editable in excel output ,whereas some columns will be editable.
User must not be able to add any line manually in the report.
Can anyone pls help me out to find a way to build this?????????
Thanks
Titas

Hi Titas,
Any luck with this? Were you able to create a multi-tab report using XML Publisher? Any help on this will be greatly appreciated.
Thanks.

XSLT Mapping Help Needed

Hi,
I have a XSD file with multiple references in my external definition. I am trying to build a schema validation functionality for a xml based on the multiple XSD's.
Is it possible to do a schema validation using xslt mapping?
I am using Altova mapforce to generate XSLT mapping but somehow it is not working. It gives me an error "XML Not well Formed".
Please help!!

Hi Jyanth
yes you can do this
i advice you to use XML Schema Tools like stylus studio or spy for editing, mapping, converting, validating, generating, binding and documenting any XML data model
few links for you how you can do in XML
validating XML using XSLT
http://www.ldodds.com/papers/schematron_xsltuk.html
http://www.w3.org/TR/xslt20/
http://www.stylusstudio.com/xsd_to_xsd.html
https://www.xsltstudio.com/xml_schema.html
regards
Sandeep
If helpful kindly reward points

Mapping Help Needed

Hello Gurus,
I need help in message mapping. I have a requirement as below.
E1EDP01 segment contains many E1EDP19 segments
E1EDP19 segment contains QUALF, KTEXT and many other fields.
in the output field, for every QUALF = "002", I need the value of KTEXT of the same E1EDP19.
the output group is repeated per E1EDP01 (this is working fine)
The problem is that KTEXT segment is not coming in every E1EDP19, so the result is erratic.
the present code looks like
Qualf (context E1EDP01)--
 Equals --
 const-002 -- IF --Outputfield
 KTEXT(context E1EDP01)--
I tried many other things as well, but result is not as expected
pls help.
Thanks
KQ

Hi,
I am not sure why it is not working in your case. I developed same mapping and it is giving correct result.
Source Payload:
<E1EDP19 SEGMENT="">
 <QUALF>002</QUALF>
 <IDTNR/>
 <KTEXT>A</KTEXT>
</E1EDP19>
<E1EDP19 SEGMENT="">
 <QUALF>003</QUALF>
 <IDTNR/>
</E1EDP19>
<E1EDP19 SEGMENT="">
 <QUALF>003</QUALF>
</E1EDP19>
<E1EDP19 SEGMENT="">
 <QUALF>002</QUALF>
 <IDTNR/>
 <KTEXT>SDN</KTEXT>
</E1EDP19>
Target field gets value as "SDN".
Is this your requirement?
Answers to your questions:
1) the context cannot be E1EDP19, cos there are multiple P19 segments in P01 and it should be done on P01, as the output is based on per P01.
Even if you are creating target based on line item level (E1EDP01), every E1EDP01 segment will have E1EDP19 and KTEXT with QUALF = 002. Also KTEXT of same E1EDP01 should go to target. Hence in your mapping context should be at E1EDP19 level.
2) the Qualf comes more number of times than KTEXT, so they are not "matching" at context level.
Map with default function will take care of this.
-Gouri

Mobile maps help needed!

I'm trying to design and develop an application which uses Location Based Services and basicaly shows an interactive map of the current location.
I would like to ask if anyone knows where to start, I know more or less how to use JSR-179. Let's say I have current coordinates and then I want to display the map, the point is I would like to know which way to go from here.
The Google Maps API is fairly easy if you use Java Script and a web browser, does anyone know how to get the map from google or maybe yahoo and display it in the midlet without the browser?
There is a midlet available straight from google (mobile goolge maps http://www.google.com/gmm ) which is just great, I have no idea how it is implemented, If anyone knows, please send me some suggestions.
I would like to accompish all the processing of the retrived images(possible from the google maps server) with Java EE and then retrive them and display them on the mobile (maybe as an XML file - SVGt image). Anyway, I hope I have described the idea, as I said I don't know where to go, and if there is someone with some experience with that kind of staff please help, this is my final year project and I'm not asking for the solution, just for some directions and the proper way of implementing those things.
Thanks a lot in advance!

You can use the Yahoo Maps API. It has a REST interface.
http://developer.yahoo.com/maps/rest/V1/mapImage.html
You can parse response and download the image.
Alternatively you can use a server as an intermediary. For example, you can send your server the coords and options, then your server would talk to Google or Yahoo and retrieve the map image.
I created an example app some time ago that will use the Yahoo Maps image. The project page is http://gallery.yahoo.com/apps/10685 and the source code is available on http://hostj2me.com/appdetails.html?id=2875
It takes up to minute to initialize and retrieve the initial coords. But here is how it works.
1) get GPS coods
2) send cords (http get) to Yahoo
3) parse XML response and retrieve image URL
4) download and display image from URL

PP Scenario Mapping help Needed

Hi Guys
Can anyone please help to map the following scenario?
Scenario: SAP PP
Product: Ingot
Size: Ingot 100 X 100, Ingot 125 X 125, Ingot 160 X160
Grade: A, B, C,
Saleable Item: Ingot100 X100 Grade A, Ingot100 X100 Grade B, Ingot160 X160 Grade C etc. (i.e. combination of Grade & Size will determine the saleable items.)
Characteristics to determine Grades: Carbon%, Phos%, Mn%,
Requirement:
1. Planning scenario make to Stock and stock will be maintained size and grade basis(e.g. Ingot100 X100 Grade A = 110 TO, Ingot 100X100 Grade B = 124 TO etc.).
2. Planning will be done at Ingot level.
3. Batch no will be used to track the heat number during GR of Billet.
4. There will be a BOM & Routing to produce Billet.
5. Size and grade will be determined during quality Inspection i.e. as per MIC (Carbon%, Phos%, Mn%,etc) value.
SAP requirement:
1. Planning Strategy for Ingot.
2. In which Stage production confirmation will be carried out.
3. Process mapping for saleable items.(Whether its necessary to open individual material code for each saleable items. If yes what will be the planning strategy for saleable items. But if no what will be the mapping)
4. Costing basis (at Ingot level or at saleable item level? If at saleable item level then what will be the cost components in between Ingot and saleable item level)
Looking forward for any valuable suggestion.
With Best Regards
Soumya Das
SAP PP-PS Consultant
Kolkata
Hello: +919755138074

Basically I am FI/CO consultant and worked on CO implementation project. So based on my costing view ,I can give you some rough Idea.
1) As your planning is make to stock , but still does your production planning flows from your sales planning or not. In SAP you can create your production planning either directly or from your sales planning.
2) You can Plan your material down the bill of material also i.e
at the raw material level level also. Technically each of your finished product might have standard BOM quantity and standard tak time (cycle time ) for each process which is defined in routing.So when BOM is exploded at the time of demand creation ,it explodes both your bill of material as well as your routing.Inshort if your FG is made up of X quantity of A and Y quanitity of B plus it goes machining activity of 5 minutes for each quantity produced . So If my production planning is of 1000 unit . Then after explosion it will plan
1000X of A and 1000Y of B plus 5000 minutes machine time will ple planned.And based on production lead time,procurement lead time and available stock,and available capacity for production,it will schedule the production.
3) Confirmation will be done again based on the requirement.If you want calculate WIP stock at each stage .Then it has to be confirmed at each stage to know the WIP stages. Plus at what process you do the quality inspection.In that case you have to confirm the process and then make the qc and then you have to start the new operation.
4) Yes you have to open the seperate material code for the saleable material as well as semifinished material.Your SFG will also contain the BOM and routing
5) Costing will be basically your raw material cost(which will come from bom),material overhead(come from costing sheet), Process cost(come from routing),manufacturing obverhead(come from costing sheet),administrative overhead(come from costing sheet) and sales and distribution overhead(come from costing sheet) depending on the costing requirement.
Regards
Sameer Kumar

Time mapping help needed

I have used the time mapping feature to speed up/fast-forward a segment of my video. It looks just the way that I want it to. However, after the fast-forward segment is over, the audio does not work for the normal-speed section afterwards. Any suggestions?

reed721
The audio is going to need special considerations in this Time Remapping workflow. This is one way to get around certain feature limitations to cooridinate audio with the video clip to which fast motion has been applied to a portion of it.
Remember, in the fast motion area of the video clip, frames have been removed by the technique in order to apply the fast motion effect, and duration is shortened in the process. So, when you are finished in the Time Remapping workspace and returned to the Premiere Elements Expert workspace, that fast motion video is going to have a shorter duration than the original. And, your audio track will be at the original duration of the file.
1. In the Premiere Elements Expert workspace, unlink the audio from the video (to do that, right click the file on the Timeline and select Unlink Audio and Video).
2. Identify the segment of the video to which fast motion is to be applied with Time Remapping. Note the times, example, segment 00;00;24;22 to 00;00;45;07.
3. With the Scissors Tool (using tab on Timeline Indicator stem or shortcut Ctrl+K), cut the audio at 00;00;24;22 and at 00;00;45;07, giving you 3 audio segments.
4. Select the Timeline video, go to Tools Menu/Time Remapping, and open the Time Remapping workspace.
5. In the Time Remapping workspace, establish your Fast Motion Time Zone using the times of 00;00;24;22 to 00;00;45;07 for the Time Zone. Click Done when finished.
6. When you are back in the Premiere Elements Expert workpace
a. You will work on your 3 segments of audio.
b. Leave the first audio where it is. Move the second audio down from Audio 1 to Narration or Soundtrack, just to get it out of the way.
c. Take the third audio and move it to the left so that its end matches up with the end of the fast motion video clip above it.
d. Then adjust the duration of the second clip which has been out of the way on another audio track.
Two different effects can be produced here...the second audio will be placed on Audio 1 directly below the fast motion portion of the video clip AFTER its duration has been decreased while it is still in its "out of the way" location.
One way...with the mouse cursor drag the end of the audio to the left to decrease its duration to fit the gap between first and third audio. Move the duration shortened second audio up to fit the gap between the first and third audio on Audio 1.
Second way...determine the duration of the gap between the first and third audio, and use Time Stretch to decrease the duration of the second clip so that it fits the gap between the first and third audio. Move the duration shortened second audio up to fit the gap between the first and third audio on Audio 1.
Please check out the details and see if any of that works for you. I have road tested it. Please let me know if you need clarification on the details. I will provide screenshots if necessary.
Thanks.
ATR

Mapping Help Needed - Message or Java UDF

Hello Gurus,
   I have a source structure as below.
Idoc
-group_a (0 to 99999)
-- sub_groupa_1 (0 to 99999)
      sga1_field_1
       sga1_field_2
-- sub_groupa_2
     sga2_field_1
     sga2_field_2
-- sub_groupa_n
     sgan_field_1
     sgan_field_2
-group_n
-- sub_groupn_1
     sgn1_field_1
     sgn1_field_2
-- sub_groupn_2
     sgn2_field_1
     sgn2_field_2
-- sub_groupn_n
     sgnn_field_1
     sgnn_field_2
every group creates an output group (lineitem), that works fine
now my requirement is as below
a particular output field (per output group) = sum (sub_field_2s) wherever sub_field_1s = first occurence of sub_fld_1 of the corresponding group
I tried different things, but could not get the required results.
pls let me know if my explanation is not clear..
Please help..
thanks
KnowledgeQuest.

Hi,
Please provide your source and target structure...Also, if possible, please provide sample inputs/outputs so that we can visualize your problem correctly.
hope this helps,

XML Gurus -My first request -Help needed urgently

Hi XML gurus,
I have a requirement to convert the following XML into two oracle tables.This is the first time I am looking at an XML script this closely....Could any of the gurus study the pattern of the xml and convert this into oracle tables with the constraints and post the script.After some thorough look I am able to conclude that the data has to be pushed into two tables.Appreciate your help!!
XML file is as below
- <Batch BatchCreated="633479274856698434" TransType="EISendCATProfile">
- <SiebelMessage>
- <CATProfiles>
- <CATProfile Id="1-6XCMTV3">
<CATCode>SE0</CATCode>
<LegacyHandled>N</LegacyHandled>
<DOLStart>05/31/2008</DOLStart>
<DOLEnd>06/02/2008</DOLEnd>
<Status>New</Status>
<TransStatus>Pending</TransStatus>
<Description>CAT SE0 MN Auto Wind and Hail Prop Wind, Hail and Other Weather 5/31 - 6/2</Description>
<GMTCreated>06/01/2008 14:23:26</GMTCreated>
<GMTUpdated>06/01/2008 14:31:21</GMTUpdated>
- <Details>
- <Detail Id="1-6XCMTV5">
<State>MN</State>
<PolicyType>Auto</PolicyType>
<ClaimType>Comprehensive</ClaimType>
<CauseOfLoss>Hail</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:23:47</GMTCreated>
<GMTUpdated>06/01/2008 14:24:11</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTV9">
<State>MN</State>
<PolicyType>Auto</PolicyType>
<ClaimType>Comprehensive</ClaimType>
<CauseOfLoss>Wind</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:24:11</GMTCreated>
<GMTUpdated>06/01/2008 14:24:28</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVC">
<State>MN</State>
<PolicyType>Commercial Auto</PolicyType>
<ClaimType>Comprehensive</ClaimType>
<CauseOfLoss>Hail</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:24:29</GMTCreated>
<GMTUpdated>06/01/2008 14:24:45</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVF">
<State>MN</State>
<PolicyType>Commercial Auto</PolicyType>
<ClaimType>Comprehensive</ClaimType>
<CauseOfLoss>Wind</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:24:47</GMTCreated>
<GMTUpdated>06/01/2008 14:25:10</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVI">
<State>MN</State>
<PolicyType>Commercial Property</PolicyType>
<ClaimType>Commercial Property</ClaimType>
<CauseOfLoss>Windstorm & Hail</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:25:13</GMTCreated>
<GMTUpdated>06/01/2008 14:25:55</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVL">
<State>MN</State>
<PolicyType>Homeowners</PolicyType>
<ClaimType>Property</ClaimType>
<CauseOfLoss>Hail</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:25:57</GMTCreated>
<GMTUpdated>06/01/2008 14:26:14</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVO">
<State>MN</State>
<PolicyType>Homeowners</PolicyType>
<ClaimType>Property</ClaimType>
<CauseOfLoss>Wind</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:26:16</GMTCreated>
<GMTUpdated>06/01/2008 14:27:06</GMTUpdated>
</Detail>
- <Detail Id="1-6XCMTVU">
<State>MN</State>
<PolicyType>Homeowners</PolicyType>
<ClaimType>Property</ClaimType>
<CauseOfLoss>Other Weather Related</CauseOfLoss>
<Status>New</Status>
<GMTCreated>06/01/2008 14:29:35</GMTCreated>
<GMTUpdated>06/01/2008 14:29:52</GMTUpdated>
</Detail>
</Details>
</CATProfile>
</CATProfiles>
</SiebelMessage>
</Batch>
Thanks Much!
Sridhar

I tried what you told AnanSmriti.
But still Server cannot find the page .
I have saved JSP pages in DefaultWebApp and Java class files in WEB-INF /classes under DefaultWebApp dir.
Also I have given the same URl in web.xml as in my first page.
Please tell me where am I going wrong.
Thanx in advance for any help.

XML to IDOC : Hierarchy mapping help needed

Similar Messages

Maybe you are looking for