0DOC_NUMBER - Activation Error in DEV
I am trying to activate the accounts payable ODS 0FIAP_O03 and it is failing. So, I tried to activate each infoObject but the infoObject 0DOC_NUMBER is giving me activation problems and a very strange error which says
"Characteristic 0DOC_NUMBER is not active. You must activate the characteristic. "
Has anyone seen this problem ? and know how to resolver it. We are on 3.0B and an OSS note has been opened.
Thank you in advance.
After activation each object, I am able to activate the ODS but still has the following warning.
InfoObject 0DOC_NUMBER is in version A, but the object status is active
Message no. R7493
Diagnosis
InfoObject 0DOC_NUMBER is available in the active version, but has been deactivated.
System response
InfoObject 0DOC_NUMBER cannot be used in other objects.
Procedure
Activate InfoObject 0DOC_NUMBER first.
Any thoughts?
Similar Messages
-
Transport error from dev to quality
HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
Start of subsequent processing ... 20100409231713
End of subsequent processing... 20100409231716
Thanks,
krantiStart of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
Start of subsequent processing ... 20091112090953
End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed -
Activation Problem from Dev to QA through transport
We are tryiing to do a transport from Dev to QA and we are getting the following error even after several re-import of a request. We have also checked and rechecked the activated infoobjects and also if any of the objects are locked by some other request or not.
The request gets cancelled with error code -12.
It looks like when we transport the InfoObjects in small bunch, it gets successfully transported, otherwise if there are lots of InfoObjects in a request then it fails.
Error log is :
tart of the after-import method for object type R3TR IOBJ (Activation Mode)
System error in lock management
Error AD 025 when handling objects with type R3TR IOBJ
Start of the after-import method for object type R3TR ODSO (Activation Mode)
Lock table overflow
Start of the after-import method for object type R3TR CUBE (Activa
Error when checking InfoCube 0CSAL_C01
InfoObject 0BP_ACTIVIT is not available in active version
InfoObject 0BP_CONTPER is not available in active version
InfoObject 0CRMPU_OG_R is not available in active version
InfoObject 0CRMSA_OG_R is not available in active version
InfoObject 0CRMSE_OG_R is not available in active version
InfoObject 0CRM_CAT is not available in active version
InfoObject 0CRM_DIRECT is not available in active version
InfoObject 0CRM_OBJECT is not available in active version
InfoObject 0REJECTN_ST is not available in active version
InfoObject 0REASON_REJ is not available in active version
InfoObject 0NET_VALUE is not available in active version
InfoObject 0CML_OR_QTY is not available in active version
InfoObject 0NET_PRICE is not available in active version
Check the InfoCube online
Start of the after-import method for object type R3TR MPRO (Activation Mode)
Lock table overflow
Lock table overflow
Lock table overflow
Start of the after-import method for object type R3TR ISTD (Activation Mode)
Start of the after-import method for object type R3TR ISCS (Activation Mode)
InfoObject FA COMPLETION DATE ( ZFCOM_DT ) is not active, total of 175 inactive InfoObjects
InfoObject Business Transaction Type ( 0CRM_PRCTYP ) is not active, total of 33 inactive nfoObjects
InfoObject ACTIVITY: Sloution Description ( ZSOLDESC ) is not active, total of 67 inactive InfoObjects
Activation of communication structure /BIC/CS0PLANT_ATTR in Dictionary failed
Activation of communication structure /BIC/CS0PLANT_TEXT in Dictionary failed
Activation of communication structure /BIC/CS0WBS_ELEMT_ATTR in Dictionary failed
Activation of communication structure /BIC/CS0WBS_ELEMT_TEXT in Dictionary failed
InfoObject Value Type for Reporting ( 0VTYPE ) is not active, total of 19 inactive InfoObjects
InfoObject Value Type for Reporting ( 0VTYPE ) is not active, total of 13 inactive InfoObjects
InfoObject Number of orders ( 0ORDERS ) is not active, total of 8 inactive InfoObjects
InfoObject Long Number for Configurable Material ( ZMATCFG ) is not active, total of 46 inactive InfoObjects
InfoObject Cumulative order quantity in sales units ( 0CML_OR_QTY ) is not active, total of inactive InfoObje
InfoObject Net Price per 1*VKME ( 0NETPR_VKM ) is not active, total of 13 inactive InfoObjects
InfoObject Record deleted ( 0REC_DELETD ) is not active, total of 24 inactive InfoObjects
InfoObject Delivery ( 0DELIV_NUMB ) is not active, total of 15 inactive InfoObjects
InfoObject Preceding document category ( 0PRVDOC_CTG ) is not active, total of 28 inactive InfoObjects
InfoObject Goods Issue Date: Delivery Header ( 0GI_DATE_DH ) is not active, total of 34 inactive InfoObjects
InfoObject No.of billing docs ( 0NO_INV ) is not active
Activation of communication structure /BIC/CS2LIS_13_VDITM in Dictionary failed
Activation of communication structure /BIC/CS2LIS_13_VDKON in Dictionary failed
InfoObject 0REJECTN_ST is not available in active version
InfoObject 0REASON_REJ is not available in active version
InfoObject 0NET_VALUE is not available in active version
InfoObject 0CML_OR_QTY is not available in active version
InfoObject 0NET_PRICE is not available in active version
Check the InfoCube online
Start of the after-import method for object type R3TR MPRO (Activation Mode)
Lock table overflow
Lock table overflow
Lock table overflow
Start of the after-import method for object type R3TR ISTD (Activation Mode)
Start of the after-import method for object type R3TR ISCS (Activation Mode)
InfoObject FA COMPLETION DATE ( ZFCOM_DT ) is not active, total of 175 inactive InfoObjects
InfoObject Business Transaction Type ( 0CRM_PRCTYP ) is not active, total of 33 inactive InfoObjects
InfoObject ACTIVITY: Sloution Description ( ZSOLDESC ) is not active, total of 67 inactive InfoObjects
Activation of communication structure /BIC/CS0PLANT_ATTR in Dictionary failed
Activation of communication structure /BIC/CS0PLANT_TEXT in Dictionary failed
Activation of communication structure /BIC/CS0WBS_ELEMT_ATTR in Dictionary failed
Activation of communication structure /BIC/CS0WBS_ELEMT_TEXT in Dictionary failed
InfoObject Value Type for Reporting ( 0VTYPE ) is not active, total of 19 inactive InfoObjects
InfoObject Value Type for Reporting ( 0VTYPE ) is not active, total of 13 inactive InfoObjects
InfoObject Number of orders ( 0ORDERS ) is not active, total of 8 inactive InfoObjects
InfoObject Long Number for Configurable Material ( ZMATCFG ) is not active, total of 46 inactive InfoObjects
InfoObject Cumulative order quantity in sales units ( 0CML_OR_QTY ) is not active, total of 9 inactive InfoObje
InfoObject Net Price per 1*VKME ( 0NETPR_VKM ) is not active, total of 13 inactive InfoObjects
InfoObject Record deleted ( 0REC_DELETD ) is not active, total of 24 inactive InfoObjects
InfoObject Delivery ( 0DELIV_NUMB ) is not active, total of 15 inactive InfoObjects
InfoObject Preceding document category ( 0PRVDOC_CTG ) is not active, total of 28 inactive InfoObjects
InfoObject Goods Issue Date: Delivery Header ( 0GI_DATE_DH ) is not active, total of 34 inactive InfoObjects
InfoObject No.of billing docs ( 0NO_INV ) is not active
Activation of communication structure /BIC/CS2LIS_13_VDITM in Dictionary failed
Activation of communication structure /BIC/CS2LIS_13_VDKON in Dictionary failed
How do we get rid of this?
Thanks
SachinHi,
There are many info objects which are not activate, because of this all other objects are failed, so create seperate trasport request for info objects and another request for Data source and info providers.
Cheers,
Malli. -
SQL1119N A connection to or activation of database "DEV"
Hello All,
am Gautam Poddar from PwC, Kolkata. I have talked with you just now.
We have activated the logretain and userexit on after taking the full ofline backup of the system. We were unable to take the online backup, so log directory was full. So we have moved the log file from log directory to another directory. After that we have increased the size of the log directory and copy all the log files to log directory but database connection is failed. I am getting this error while try to connect with this command > connect to dev
SQL1042C An unexpected system error occurred. SQLSTATE=58004
Yesterday I was unable to resolve the problem. So I have restored all the file system from OS level Backup. Now I am not able to connect the Database and it is giving this error message
ecldevqa:db2dev 5> db2 connect to DEV
SQL1119N A connection to or activation of database "DEV" cannot be made
because a previous restore is incomplete. SQLSTATE=57019
Restored these file system
/dev/sapvg/devsaptemp1
1572864 16768 1544008 1% /db2/DEV/saptemp1
/dev/sapvg/devsapdata4
41943040 23979664 17823088 57% /db2/DEV/sapdata4
/dev/sapvg/devsapdata3
41943040 23979664 17823088 57% /db2/DEV/sapdata3
/dev/sapvg/devsapdata2
41943040 23979664 17823088 57% /db2/DEV/sapdata2
/dev/sapvg/devsapdata1
41943040 23979664 17823088 57% /db2/DEV/sapdata1
/dev/sapvg/DEV_LOG_DIR
10485760 5390328 5055680 52% /db2/DEV/log_dir
/dev/sapvg/devdb2dump
3145728 2757168 385592 88% /db2/DEV/db2dump
/dev/sapvg/db2dev 3145728 100224 3021728 3% /db2/db2dev
I have seen these out put has not changed after restoration > db2 get db cfg for DEV
ecldevqa:db2dev 17> db2 get db cfg for DEV
Database Configuration for Database DEV
Database configuration release level = 0x0b00
Database release level = 0x0b00
Database territory = en_US
Database code page = 1208
Database code set = UTF-8
Database country/region code = 1
Database collating sequence = IDENTITY_16BIT
Alternate collating sequence (ALT_COLLATE) =
Database page size = 16384
Dynamic SQL Query management (DYN_QUERY_MGMT) = DISABLE
Discovery support for this database (DISCOVER_DB) = ENABLE
Restrict access = NO
Default query optimization class (DFT_QUERYOPT) = 5
Degree of parallelism (DFT_DEGREE) = 1
Continue upon arithmetic exceptions (DFT_SQLMATHWARN) = NO
Default refresh age (DFT_REFRESH_AGE) = 0
Default maintained table types for opt (DFT_MTTB_TYPES) = SYSTEM
Number of frequent values retained (NUM_FREQVALUES) = 10
Number of quantiles retained (NUM_QUANTILES) = 20
Backup pending = NO
Database is consistent = NO
Rollforward pending = NO
Restore pending = NO
Multi-page file allocation enabled = YES
Log retain for recovery status = NO
User exit for logging status = YES
Self tuning memory (SELF_TUNING_MEM) = OFF
Size of database shared memory (4KB) (DATABASE_MEMORY) = COMPUTED
Database memory threshold (DB_MEM_THRESH) = 10
Max storage for lock list (4KB) (LOCKLIST) = 20000
Percent. of lock lists per application (MAXLOCKS) = 90
Package cache size (4KB) (PCKCACHESZ) = 5120
Sort heap thres for shared sorts (4KB) (SHEAPTHRES_SHR) = 20000
Sort list heap (4KB) (SORTHEAP) = 2048
Database heap (4KB) (DBHEAP) = 35000
Catalog cache size (4KB) (CATALOGCACHE_SZ) = 2560
Log buffer size (4KB) (LOGBUFSZ) = 1024
Utilities heap size (4KB) (UTIL_HEAP_SZ) = 10000
Buffer pool size (pages) (BUFFPAGE) = 10000
Max size of appl. group mem set (4KB) (APPGROUP_MEM_SZ) = 128000
Percent of mem for appl. group heap (GROUPHEAP_RATIO) = 25
Max appl. control heap size (4KB) (APP_CTL_HEAP_SZ) = 1600
SQL statement heap (4KB) (STMTHEAP) = 5120
Default application heap (4KB) (APPLHEAPSZ) = 4096
Statistics heap size (4KB) (STAT_HEAP_SZ) = 15000
Interval for checking deadlock (ms) (DLCHKTIME) = 10000
Lock timeout (sec) (LOCKTIMEOUT) = 3600
Changed pages threshold (CHNGPGS_THRESH) = 40
Number of asynchronous page cleaners (NUM_IOCLEANERS) = AUTOMATIC
Number of I/O servers (NUM_IOSERVERS) = AUTOMATIC
Index sort flag (INDEXSORT) = YES
Sequential detect flag (SEQDETECT) = YES
Default prefetch size (pages) (DFT_PREFETCH_SZ) = AUTOMATIC
Track modified pages (TRACKMOD) = ON
Default number of containers = 1
Default tablespace extentsize (pages) (DFT_EXTENT_SZ) = 2
Max number of active applications (MAXAPPLS) = AUTOMATIC
Average number of active applications (AVG_APPLS) = AUTOMATIC
Max DB files open per application (MAXFILOP) = 1950
Log file size (4KB) (LOGFILSIZ) = 16380
Number of primary log files (LOGPRIMARY) = 20
Number of secondary log files (LOGSECOND) = 40
Changed path to log files (NEWLOGPATH) =
Path to log files = /db2/DEV/log_dir/NODE
0000/
Overflow log path (OVERFLOWLOGPATH) =
Mirror log path (MIRRORLOGPATH) =
First active log file = S0000062.LOG
Block log on disk full (BLK_LOG_DSK_FUL) = YES
Percent max primary log space by transaction (MAX_LOG) = 0
Num. of active log files for 1 active UOW(NUM_LOG_SPAN) = 0
Group commit count (MINCOMMIT) = 1
Percent log file reclaimed before soft chckpt (SOFTMAX) = 300
Log retain for recovery enabled (LOGRETAIN) = OFF
User exit for logging enabled (USEREXIT) = OFF
HADR database role = STANDARD
HADR local host name (HADR_LOCAL_HOST) =
HADR local service name (HADR_LOCAL_SVC) =
HADR remote host name (HADR_REMOTE_HOST) =
HADR remote service name (HADR_REMOTE_SVC) =
HADR instance name of remote server (HADR_REMOTE_INST) =
HADR timeout value (HADR_TIMEOUT) = 120
HADR log write synchronization mode (HADR_SYNCMODE) = NEARSYNC
First log archive method (LOGARCHMETH1) = OFF
Options for logarchmeth1 (LOGARCHOPT1) =
Second log archive method (LOGARCHMETH2) = OFF
Options for logarchmeth2 (LOGARCHOPT2) =
Failover log archive path (FAILARCHPATH) =
Number of log archive retries on error (NUMARCHRETRY) = 5
Log archive retry Delay (secs) (ARCHRETRYDELAY) = 20
Vendor options (VENDOROPT) =
Auto restart enabled (AUTORESTART) = ON
Index re-creation time and redo index build (INDEXREC) = SYSTEM (RESTART)
Log pages during index build (LOGINDEXBUILD) = OFF
Default number of loadrec sessions (DFT_LOADREC_SES) = 1
Number of database backups to retain (NUM_DB_BACKUPS) = 12
Recovery history retention (days) (REC_HIS_RETENTN) = 60
TSM management class (TSM_MGMTCLASS) =
TSM node name (TSM_NODENAME) =
TSM owner (TSM_OWNER) =
TSM password (TSM_PASSWORD) =
Automatic maintenance (AUTO_MAINT) = ON
Automatic database backup (AUTO_DB_BACKUP) = OFF
Automatic table maintenance (AUTO_TBL_MAINT) = ON
Automatic runstats (AUTO_RUNSTATS) = ON
Automatic statistics profiling (AUTO_STATS_PROF) = OFF
Automatic profile updates (AUTO_PROF_UPD) = OFF
Automatic reorganization (AUTO_REORG) = OFF
Before restoration it was "First active log file = S0000062.LOG" and after restoration this parameter has not changed.
db2diag.log >
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerFmpListener, probe:999
MESSAGE : FMP exiting with error. Last agent registered:
DATA #1 : Hexdump, 4 bytes
0x9FFFFFFFFFFFEEE4 : 0000 0000 ....
2008-01-30-10.34.12.283359+330 I2618633502A1630 LEVEL: Event
PID : 12514 TID : 1 PROC : db2start
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2dev/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x9FFFFFFFFFFFBBC0 : 2F64 6232 2F64 6232 6465 762F 7371 6C6C /db2/db2dev/sqll
0x9FFFFFFFFFFFBBD0 : 6962 2F61 646D 2F64 6232 7374 6172 3200 ib/adm/db2star2.
0x9FFFFFFFFFFFBBE0 : 4E4F 4D53 4700 0000 0000 0000 0000 0000 NOMSG...........
0x9FFFFFFFFFFFBBF0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC00 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC10 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC20 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC30 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC40 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC50 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC60 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC70 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC80 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBC90 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBCA0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x9FFFFFFFFFFFBCB0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
2008-01-30-10.34.14.121256+330 E2618635133A1198 LEVEL: Event
PID : 12517 TID : 1 PROC : db2star2
INSTANCE: db2dev NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2dev" uses "64" bits and DB2 code release "SQL09011"
with level identifier "01020107".
Informational tokens are "DB2 v9.1.0.1", "s061104", "U809678", Fix Pack "1".
DATA #2 : System Info, 104 bytes
System: HP-UX ecldevqa B.11.23 U ia64
CPU: total:6 online:6 Threading degree per core:1
Physical Memory(MB): total:16354 free:9294
Virtual Memory(MB): total:49122 free:42062
Swap Memory(MB): total:32768 free:32768
Kernel Params: msgMaxMessageSize:65535 msgMsgMap:2048 msgMaxQueueIDs:512
msgNumberOfHeaders:2046 msgMaxQueueSize:65535
msgMaxSegmentSize:96 shmMax:17179869184 shmMin:1 shmIDs:400
shmSegments:300 semMap:2050 semIDs:2048 semNum:4096
semUndo:1024 semNumPerID:2048 semOps:500 semUndoPerProcess:100
semUndoSize:824 semMaxVal:32767 semAdjustOnExit:16384
2008-01-30-10.34.50.661312+330 I2618636332A365 LEVEL: Warning
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleCheckForRestore, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.34.50.662169+330 I2618636698A373 LEVEL: Warning
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqlePrepareForSerialization, probe:20
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.34.50.662288+330 I2618637072A353 LEVEL: Severe
PID : 12533 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-7 APPID: *LOCAL.db2dev.080130050450
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleserl, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.986356+330 I2618637426A365 LEVEL: Warning
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleCheckForRestore, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.987187+330 I2618637792A373 LEVEL: Warning
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqlePrepareForSerialization, probe:20
RETCODE : ZRC=0xFFFFFBA1=-1119
2008-01-30-10.43.19.987305+330 I2618638166A353 LEVEL: Severe
PID : 12532 TID : 1 PROC : db2agent (DEV) 0
INSTANCE: db2dev NODE : 000
APPHDL : 0-10 APPID: *LOCAL.db2dev.080130051319
AUTHID : DB2DEV
FUNCTION: DB2 UDB, base sys utilities, sqleserl, probe:10
RETCODE : ZRC=0xFFFFFBA1=-1119
ecldevqa:db2dev 20>
Thanks & Regards,
Gautam Poddar
SAP BASIS
PricewaterhouseCoopers (P) LimitedHi Gautam
As Adam said ....
1. never manually move db2 active log files
2. IBM does not support filesystem restores.
The only solution for you is to restore the offline backup and if you have archive logs, then you can do a rollforward .
Amit
Edited by: amit chak on Aug 19, 2008 8:07 PM -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
-
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
DSO Activation Error - While Installing BI Content
HI Friend,
First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found 80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des -
My ipod touch 5th gen is stuck on activation error, how do i fix it?
My ipod touch 5th generation is stuck on activation error and I got this for Christmas so I don't know what the ipod developer program is! please help
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
'Activation error..' message when uploading rules for multiple territories
Hi All,
When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
The create_rule() and save_rule() methods of CL_CRM_FDT class and FM CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
Kindly suggest some ways to unlock or any other alternatives.
Thanks & Regards
JagathshreeHi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results. -
Hi All,
I am having a hard time finding any info on this activation error, and I really can't get to the bottom of it. When I enter my companie's activation code for the BES 10 network, it gives me the following message:
" Device activation can't be completed because the setup process or a training tutorial is running on your device. Try again later."
It would be nice if the msg could be a little more specific! But anyway, I have tried all the traditional fixes, battery pulls, re&re to BES, etc. but still nothing. My last option is to wipe and see if that works but curious to see if anyone has run into this before.
PS I have a Z10 STL100-3
Thanks in advance!
cheersGood. excellent solved service blackberry
Thanks. aspataro
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"
Maybe you are looking for
-
A few weeks ago about 7 of my apps had updates. I pressed update all and instead of it updating them, they were frozen for several days in "waiting" mode. Finally I was tired of this so I deleted the apps by pressing one and it activated the x to pop
-
im trying to move all my music to another drive because my main one is full, and when i do and try to play a song in itunes i need to locate it on my computer and tell itunes where it is, for every single song. cant itunes do this for me ?
-
My itunes plays songs but I can't hear them
I am having trouble with itunes. The song is playing but I cannot hear it. My speakers are working and my volumes are all high. does anyone know what's going on? My ipod works perfectly, though.
-
Server communications error in Sharepoint365/Access web app
I'm having a similar issue to this post using Office365 (academic). I have an Access web app that was working fine until about 1 week ago when suddenly became very slow to start on a web browser, and then any changes I make in Access 2013 and then at
-
I'm writing an app that needs to deliver data to different places based on source and destination IP addresses. I was thinking that I could do this by stuffing the bits of both addresses into a long (source followed by destination) and then making a