0FI_AR_4 Mapping

hello all,
i am creating transformation from 0FI_AR_4 (infosource ) to 0FI_AR_4(data source) while mapping i mapped all the fields there is one field 0RECORDMODE in target with constant(by default) and i there is one filed UPDMOD( Record mode) in source that means in data source.
so should i remove that constant rule and map UPDMOD to ORECORDMODE or can i leave that?
Thanks,
Sneha.

Hi Sneha,
0RECORDMODE is used to capture the Delta's from datasource.
So you need to map 0RECORDMODE to UPDMOD(BW Delta Process: Record Mode).
Regards,
Sandeep

Similar Messages

Delta update for 0FI_AR_4 DataSource

Hi Experts,
We have a couple of reports (Infoprovider ODS) which are based on the 0FI_AR_4 DataSource. We have enhanced the Datasource and added 7 to 8 fields from SD and FI region. For enabling delta current mapping is: UPDMOD (R/3) field mapped to 0RECORDMODE (BW).
One of the enhanced FI field is Collection Specialist. If this Collection Specialist Master record is changed for a particular Customer, all the newly generated Accounting Document shows the current Collection specialist but the already existing Accounting Document in BW are not getting converted to the current Collection Specialist.
Enhancement Code for 2 fields:
1. SELECT SINGLE KLIMK FROM KNKK INTO V_KLIMK
         WHERE KUNNR = l_s_dtfiar_3-KUNNR AND KKBER = l_s_dtfiar_3-KKBER.
     IF SY-SUBRC = 0.
         l_s_dtfiar_3-ZZKLIMK = V_KLIMK.
     ENDIF.
2. CLEAR: WA_UDMBPSEGMENTS.
    SELECT * FROM UDMBPSEGMENTS INTO WA_UDMBPSEGMENTS
                               WHERE PARTNER = l_s_dtfiar_3-KUNNR.
    ENDSELECT.
    IF SY-SUBRC = 0.
        SELECT * FROM UDM_SGMT_COMP INTO TABLE IT_COMP_CODE
                               WHERE COLL_SEGMENT = WA_UDMBPSEGMENTS-COLL_SEGMENT.
        LOOP AT IT_COMP_CODE.
          IF IT_COMP_CODE-COMP_CODE = l_s_dtfiar_3-BUKRS.
            l_s_dtfiar_3-ZZCOLL_SPECL = WA_UDMBPSEGMENTS-COLL_SPECIALIST.
          ENDIF.
        ENDLOOP.
     ENDIF.
     CLEAR   : IT_COMP_CODE
Please suggest what can be done to resolve the issue.
Thanks,
Vivek

Hi,
I hope you have written the codes in R/3 side.And whenever the Collection Specialist Master record is changed for a particular Customer, all the newly generated Accounting Document show the current Collection specialist but the already existing Accounting Document in BW will not converted to the current Collection Specialist since the data in BW is old data and no logic is written to convert the same.
Try to incorporate the logic to convert in BW also.
I could suggest is whenever there is change in Collection Specialist Master record , try to trigger a delat record generation that updates the old accounting doc withnew master in the delta load.
Ramesh

0postxt Item text Mapping

When I am mapping 0FIAR_O03 to 0FI_AR_3 there is no 0postxt in the DSO to map on to 0FI_AR_3 which has that field but when I am mapping same DSO 0FIAR_O03 to 0FI_AR_4, DSO shows up the field 0postxt in the transformation?
Why so?
What does field 0postxt imply?

hi Jr,
check
Note 603720 - Long text in line items cannot be displayed
Summary
Symptom
The 'long description' data field (0TXTLG) is used in the ODS object customer single item object (0FIAR_O03). It cannot be displayed in queries and InfoCubes that read data from the ODS object.
Other terms
Customer single item, 0FIAR_O03, 0FI_AR_4
Reason and Prerequisites
The 'long name' data field cannot be displayed because the relevant characteristic 0TXTLG has the property 'attribute only'.
Solution
This note can only be used if there is still no data in the ODS object.
As of BI Content Release 3.30, the 0TXTLG InfoObject is replaced by the 0POSTXT InfoObject.
The 'attribute only' indicator is not set for the 0POSTXT InfoObject.
Solution:
Create InfoObject ZPOSTXT. Use InfoObject 0TXTLG as a template. Delete the 'attribute only' and 'characteristic is document attribute' properties.
Delete InfoObject 0TXTLG from InfoSources 0FI_GL_4, 0FI_AR_4, 0FI_AR_3, 0FI_AP_4 and 0FI_AP_3, and insert InfoObject ZPOSTXT. You have to adjust the communication structures.
Then cancel the 0TXTLG characteristic from ODS objects 0FIGL_O02, 0FIAP_O03 and 0FIAR_O03. Insert the ZPOSTXT characteristic where you deleted 0TXTLG.
Select the 'overwriting' update type in the update rues of these InfoProviders. Activate the update rules of the changed InfoProviders.
Activate all changed objects.

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

FileName in ABAP XSLT Mapping

Dear SDN,
In an integration scenario we are using sender File Adapter and a ABAP XSLT Mapping.
Is there any way to get the source FileName from such mapping. Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
regards,
GP

Thank you for your help,
I just try to access the adapter-specific attibutes using:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:variable name="filename" select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
</xsl:stylesheet>
but the following error raised:
<SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
have you had this situation?

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

How can I distinguish different action mapping in one ActionClass file?

I would like to create a ActionClass which will handle 3 mapping which comes from /add, /show or /del.
My question is how can I change the code so that the ActionClass servlet can distinguish the request from different url mapping ? Can anyone give me some short hints? Thx.
struts-config.xml
<action-mappings>
<action name="MemberInfoForm" path="/add" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/show" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/del" scope="request" type="com.myapp.real.MemberAction">
</action-mappings>MemberAction.class
public class MemberAction extends org.apache.struts.action.Action {
    private final static String SUCCESS = "success";
    public ActionForward execute(ActionMapping mapping, ActionForm form,
            HttpServletRequest request, HttpServletResponse response)
            throws Exception {
        return mapping.findForward(SUCCESS);
...

http://struts.apache.org/1.2.x/api/org/apache/struts/actions/MappingDispatchAction.html
http://struts.apache.org/1.2.x/api/org/apache/struts/actions/DispatchAction.html
Thank you so much for all of your suggestion.
I read the document of MappingDispatchAction and its note say:
NOTE - Unlike DispatchAction, mapping characteristics may differ between the various handlers, so you can combine actions in the same class that, for example, differ in their use of forms or validation.........
I wonder in DispatchAction, we can also have various forms or validation as MappingDispatchAction does, just by using different name in the action tag, for example:
<action input="/p1.jsp" name="MForm1" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p2.jsp" name="MForm2" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p3.jsp" name="MForm3" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">Hence, it is not the difference as stated from the NOTE, right?
Edited by: roamer on Jan 22, 2008 10:32 AM

How can I save to the same map every time when printing pdfs?

How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

Sensor Mapping Express VI's performance degrades over time

I was attempting to do a 3d visualization of some sensor data. I made a model and managed to use it with the 3d Picture Tool Sensor Mapping Express VI. Initially, it appeared to work flawlessly and I began to augment the scene with further objects to enhance the user experience. Unfortunately, I believe I am doing something wrong at this stage. When I add the sensor map object to the other objects, something like a memory leak occurs. I begin to encounter performance degradation almost immediately.
I am not sure how I should add to best add in the Sensor Map Object reference to the scene as an object. Normally, I establish these child relationships first, before doing anything to the objects, beyond creating, moving, and anchoring them. Since the Sensor Map output reference is only available AFTER the express vi run. My compromise solution, presently, is to have a case statement of controlled by the"First Call" constant. So far, performace seems to be much better.
Does anyone have a better solution? Am I even handling these objects the way the community does it?
EDIT: Included the vi and the stl files.
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:16 PM
Solved!
Go to Solution.
Attachments:
test for forum.vi ‏105 KB
chamber.zip ‏97 KB

I agree with Hunter, your current solution is simple and effective, and I can't really visualize a much better way to accomplish the same task.
Just as a side-note, the easiest and simplest way to force execution order is to use the error terminals on the functions and VIs in your block diagram. Here'a VI snippet with an example of that based on the VI you posted. (If you paste the image into your block diagram, you can make edits to the code)
Since you expressed some interest in documentation related to 3D picture controls, I did some searching and found a few articles you might be interested in. There's nothing terribly complex, but these should be a good starting point. The first link is a URL to the search thread, so you can get an idea of where/what I'm searching.You'll get more hits if you search from ni.com rather than ni.com/support.
http://search.ni.com/nisearch/app/main/p/q/3d%20picture/
Creating a 3D Scene with the 3D Picture Control
Configuring a 3D Scene Window
Using the 3D Picture Control 'Create Height Field VI' to convert a 2D image into a 3D textured heigh...
Using Lighting and Fog Effects in 3d Picture Control
3D Picture Control - Create a Moving Texture Using a Series of Images
Changing Set Rotation and Background of 3D Picture Control
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Numbers/Address Book and Google Maps

I would love to integrate my spreadsheet of addresses or my Address Book with Google Maps.
Is this possible? Somehow?
I take a lot of trips across the country and don't always know when I will be driving by my friends. But if I had a map I could glance at to see where they all are, I would know that I could schedule a lunch with a friend halfway or something like that.
I have heard about MapPoint, but don't know if there is anything like this that is free/affordable/non-MS.
Thanks!

Integrating in Numbers would not be automatic. You'd have to format links to assign to each address.
I've seen plug-ins to use Google maps with Address Book. Try a search on MacUpdate or VersionTracker for Address Book.
I think one of the features for Address Book in Leopard is integration with Google maps.

Mapping/invoking key codes in a GameCanvas's main game loop.

I'm trying to bind some diagonal sprite movement methods to the keypad. I already know that I have to map out the diagonals to key codes since key states only look out for key presses in the upper half of the phone (d-pad, soft buttons, etc...). Problem is, how do I invoke them in the main game loop since a key state can be encapsulated in a method and piped through the loop? What makes this even worst is a bug that my phone maker's game API (Siemens Game API for MIDP 1.0, which is their own implementation of the MIDP 2.0 Game API) has, in which if I override the keyPressed, keyReleased, or keyRepeated methods, it will always set my key states to zero, thus I can't move the sprite at all. Also, it seems that my phone's emulator automatically maps key states to 2, 4, 6, and 8, so my only concern is how do I map the diagonal methods into 1, 3, 7, and 9, as well as invoking them in the main game loop? Enclosed is the example code that I've been working on as well as the link to a thread in the Siemens (now Benq Mobile) developer's forum about the bug's discovery:
http://agathonisi.erlm.siemens.de:8080/jive3/thread.jspa?forumID=6&threadID=15784&messageID=57992#57992
the code:
import com.siemens.mp.color_game.*;
import javax.microedition.lcdui.*;
public class ExampleGameCanvas extends GameCanvas implements Runnable {
private boolean isPlay; // Game Loop runs when isPlay is true
private long delay; // To give thread consistency
private int currentX, currentY; // To hold current position of the 'X'
private int width; // To hold screen width
private int height; // To hold screen height
// Sprites to be used
private GreenThing playerSprite;
private Sprite backgroundSprite;
// Layer Manager
private LayerManager layerManager;
// Constructor and initialization
public ExampleGameCanvas() throws Exception {
super(true);
width = getWidth();
height = getHeight();
currentX = width / 2;
currentY = height / 2;
delay = 20;
// Load Images to Sprites
Image playerImage = Image.createImage("/transparent.PNG");
playerSprite = new GreenThing (playerImage,32,32,width,height);
playerSprite.startPosition();
Image backgroundImage = Image.createImage("/background2.PNG");
backgroundSprite = new Sprite(backgroundImage);
layerManager = new LayerManager();
layerManager.append(playerSprite);
layerManager.append(backgroundSprite);
// Automatically start thread for game loop
public void start() {
isPlay = true;
Thread t = new Thread(this);
t.start();
public void stop() { isPlay = false; }
// Main Game Loop
public void run() {
Graphics g = getGraphics();
while (isPlay == true) {
input();
drawScreen(g);
try { Thread.sleep(delay); }
catch (InterruptedException ie) {}
//diagonalInput(diagonalGameAction);
// Method to Handle User Inputs
private void input() {
int keyStates = getKeyStates();
//playerSprite.setFrame(0);
// Left
if ((keyStates & LEFT_PRESSED) != 0) {
playerSprite.moveLeft();
// Right
if ((keyStates & RIGHT_PRESSED) !=0 ) {
playerSprite.moveRight();
// Up
if ((keyStates & UP_PRESSED) != 0) {
playerSprite.moveUp();
// Down
if ((keyStates & DOWN_PRESSED) !=0) {
playerSprite.moveDown();
/*private void diagonalInput(int gameAction){
//Up-left
if (gameAction==KEY_NUM1){
playerSprite.moveUpLeft();
//Up-Right
if (gameAction==KEY_NUM3){
playerSprite.moveUpRight();
//Down-Left
if (gameAction==KEY_NUM7){
playerSprite.moveDownLeft();
//Down-Right
if (gameAction==KEY_NUM9){
playerSprite.moveDownRight();
/*protected void keyPressed(int keyCode){
int diagonalGameAction = getGameAction(keyCode);
switch (diagonalGameAction)
case GameCanvas.KEY_NUM1:
if ((diagonalGameAction & KEY_NUM1) !=0)
playerSprite.moveUpLeft();
break;
case GameCanvas.KEY_NUM3:
if ((diagonalGameAction & KEY_NUM3) !=0)
playerSprite.moveUpRight();
break;
case GameCanvas.KEY_NUM7:
if ((diagonalGameAction & KEY_NUM7) !=0)
playerSprite.moveDownLeft();
break;
case GameCanvas.KEY_NUM9:
if ((diagonalGameAction & KEY_NUM9) !=0)
playerSprite.moveDownRight();
break;
repaint();
// Method to Display Graphics
private void drawScreen(Graphics g) {
//g.setColor(0x00C000);
g.setColor(0xffffff);
g.fillRect(0, 0, getWidth(), getHeight());
g.setColor(0x0000ff);
// updating player sprite position
//playerSprite.setPosition(currentX,currentY);
// display all layers
//layerManager.paint(g,0,0);
layerManager.setViewWindow(0,0,101,80);
layerManager.paint(g,0,0);
flushGraphics();
}EDIT: Also enclosed is a thread over in J2ME.org in which another user reports of the same flaw.
http://www.j2me.org/yabbse/index.php?board=12;action=display;threadid=5068

Okay...you lost me...I thought that's what I was doing?
If you mean try hitTestPoint ala this:
wally2.addEventListener(Event.ENTER_FRAME, letsSee);
function letsSee(event:Event)
          // create a for loop to test each array item hitting wally...
          for (var i:Number=0; i<iceiceArray.length; i++)
               // if you don't hit platform...
          if (wally2.hitTestPoint(iceiceArray[i].x, iceiceArray[i].y, false)) {
          wally2.y -= 5;}
                      return;
That's not working either.

Key mapping Generator Tool

Scenario
One customer has two systems: System A and System B in his landscape. System A serves as the central server for item master data management. He maintains the same set of item master data in System B as that of System B manually. Now, the customer wants to use B1i to keep the item master data in System B automatically up to date as that in System A.
Use this tools to create the keys in the Bizstore.
Please read carefully the documentation before proceeding.
Lot of success,
Felipe

Hi all,
When running the tool I get an exception.
I have created a csv with all the cardcodes in it that need to be pushed. I have uploaded the tool to B1i. I've supplied the parameters and when I click execute the thing throws an exception.
Input path:
D:\B1i\Tools\Mapping Tool\Extracted\B1i2005PL05 or PL06\Reference\Common_BP.csv
Bizflow to execute:
/com.sap.b1i.datasync.keymapping/bfd/KeyMappingGeneration.bfd
Parameters: SenderSysId=0010000100,SenderObjectTypeId=B1.2005_BP,SenderKeyName=CardCode,SenderKeySelectionPath=BOM/BO/BusinessPartners/row/CardCode,ReceiverSysId=0010000102
Exception:
HTTP Status 500 - com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414)
What is wrong?
Kind regards,
Dwight

Key mapping

Hi All,
I have 3 fields in my source file Id,Category (Key Mapping) ,Name.
In Import Manager
I have mapped Remote Key field with ID .
Name with Name
category with Category Qualified Range (A 1-10)
I have source file like this
Id name category
11 10 A
In syndicator i have one more field Material Number .Mapped this with Material Number (should Get generated material Number )
Name with Name
Category with Category
Remote Key value with Material Number
After syndication I am getting Id values in Material Number .(Instead of 1 I am getting 11)
Can any one let me know the solution?

Got It . Should not Map Id field with the Remote key in Import Manager.

Key Mapping activates Versus Import Manager

Hello,
I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map.
Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping property,
I noticed that for each supplier ID in the Supplier table, a lot of remote keys were created. Previously I only had one remote key for each supplier and now I have a list of other supplier's ID. ( Existent or nonexistent supplier IDs). This becomes an issue for my import, because when I try to import a file where the supplier id does not exist in the MDM ( this scenario used to block my import and this is what a expect, as supplier is a key in my mapping), the system automatically maps that nonexistent supplier to other supplier.
Can you help me to understand if this is caused for the key mapping property ? Any Idea ?
Thank you very much
Luciana.

Hello Stanley,
The remote keys are form the same remote system.
My story is : When I am importing a file , suppose my file has an invalid supplier ID. ( this means this supplier is not in the lookup table Suppliers)
1)The import manager will give me a message such as : Map Supplier ID Values. This behavior was expected.
2)I decided to test the automap. The invalid supplier was not mapped to a different value. I am ok with that.
3)If the user ( dont ask me the reason ;-)) decides to map that invalid supplier ID to a different one, he/she is allowed to do so. I remember when the key mapping was not activated this option did not exist. The map and automap button was deactivated.
What I am trying to make sure is : a remote key will be created for invalid suppliers ONLY if I choose to map it with a different supplier ID.
Do you have any comments about it ?
Thank you very much
Luciana.

0FI_AR_4 Mapping

Similar Messages

Maybe you are looking for