0PERSLANGU, EVLANGUAGE, 0LOGSYS impossible to activate after upgrade to 7.0

After upgrade we must reactivate some transfert rules but transfert rules for object who use 0perslangu, evlanguage, 0logsys give me an error.
INCLUDE RSTMPL88
In Unicode program, character & can not apper in the name does here in name &RN&.
My system is BI 7.0 but we have not in UNICODE actually.
My first investigation is the code of RSTMPL88 is not correct for BI 7.0 patch 14
see the code below of the standard include
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
*@ if M_CTL-INTTYPE = 'D'.
TYPES: DE_\M_CTL-IOBJNM\ TYPE \M_CTL-INTTYPE\.
*@ else.
TYPES: DE_\M_CTL-IOBJNM\(\M_CTL-INTLEN\) TYPE \M_CTL-INTTYPE\.
*@ endif.
Conversion rule for InfoObject \m_ctl-iobjnm\
    Data type       = \m_ctl-datatype\
    ABAP type       = \m_ctl-inttype\
    ABAP length     = \m_ctl-intlen\
FORM CONVERT_\M_CTL-IOBJNM\
  USING    &RN& LIKE SY-TABIX
           &LS& TYPE RSA_LOGSYS
           &IO& TYPE RSIOBJNM
  CHANGING &RS& TYPE DE_\M_CTL-IOBJNM\ " InfoObject value
           &RC& LIKE SY-SUBRC.
Have you an idea for solving my problem.
Best regards, Patrice

For Pacth 13 there is an error, you must put an OSS note

Similar Messages

  • Powerbuilder won't activate after upgrade

    We currently have PowerBuilder 12.5 installed on a Windows XP machine.  This was licensed and activated properly.   So we tried to install 12.5.2 on a new Windows 7 machine.  After upgrade, when I ran Powerbuilder, it came up as unlicensed (or as evaluation version).  I went to the SAP site and regenerated a new license key for my machine and applied it, but it just won't activate.  There are three options for us to choose:
    New System    
    Display System
    Edit System
    We first tried the 'New System' option since it is an upgrade to 12.5.2 on a new machine (which we intend to move to).  However, the option for us to choose from the 'Product version' or 'System Type' simply won't show any drop down option for us to choose, nor does it allow us to enter.  Hence, we tried the 'Display System' and downloaded the license to update license.  It just won't activate.
    Has anybody ran into this issue and how was it solved?

    Hi All,
    I finally got a response from Nina who gave me the instruction on how to upgrade.  I followed the instruction to 'Edit System' instead of 'New System', and not use IE.  The reason I could not see drop down was due to IE 11 (have to use IE9 or before).  Now my PowerBuilder 12.5.2 was upgraded successfully.
    Thanks all, especially Nina.
    Regards

  • When upgrade from an older firefox version where an existing plugin was ready enabled, would this plugin become "ask to activate" after upgrade to v26?

    What's the user experience if he/she upgrade from an older version of Firefox, where an existing plugin was ready enabled, would this plugin become "ask to activate" after the user upgrade to Firefox v26?

    If plugins.click_to_play was set to true, it might. I am finding that click-to-play is not working very well with Firefox. Whether the plugins are set to Always Activate or Ask to Activate, it allows everything from a website to load once it is allowed from the icon in the address bar. I also have the extension Click to play per-element, and that seems to make no difference.

  • Unable to activate after upgrade

    I'm trying to re-activate my phone after upgrading to 1.1.1, and iTunes is giving me a "Cannot complete your iTunes Store request. The store may be busy," but the regular iTunes store is working fine.
    Is the activation server down right now?

    There's obviously a problem with the activation servers. Although AT&T doesn't know of any issues (and told me to contact Apple), I am now no longer getting the error, but it's been attempting to access the store now for about 5 minutes.

  • Impossible to activate after restauring

    Installing ios7 has made stucked tactile screen.
    So i made a restaure.
    Apple asked to desactivate localisation. Which I did.
    Now it's impossible to activate my iphone.
    I'm stucked at the the configuration screen : choose the langage and a wifi.
    The Sim card is locked and and I have no access to unlock.
    MY ***** iPHONE IS UNUSABLE... THANKS TO THE IOS7 !
    and whan I try to connect via Itunes it says : "your sim card is locked. please unlocked"... WHICH I *** CAN'T.
    (La carte SIM insérée dans cet iPhone est verrouillée par un code PIN. Saisissez le code PIN de votre carte SIM et connectez à nouveau votre iPhone à iTunes.)
    HELP !
    any ideas ?
    thanks a lot

    These are your choices: 1. Find a sim card that does not have a sim pin enabled, put that in your phone, activate your phone, then put your sim back in the phone & turn the sim pin off; 2. Put your sim in another phone & turn the sim pin off; 3. Get another sim from your carrier.

  • Why does Firefox offer themes and gadgets to personalize the webpage, and then make it impossible to use after upgrading Firefox? Can or will these lost functions ever be restored?

    The functions designed to modify and/or create a personalize page has ceased to function since upgrading to Firefox versions 4 & 5. No trouble shooting info has been provided to indicate a correction for this problem.

    Hi musicfan,<br />Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
    Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
    *[[Export bookmarks to Internet Explorer]]
    You should not use old versions they are insecure. Security fixes are publicised and exploitable.
    * [[Install an older version of Firefox]]
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
    *[[Send performance data to Mozilla to help improve Firefox]]
    Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
    *[[Troubleshoot Firefox issues using Safe Mode]]

  • IPhone won't activate after upgrade to 2.1 Software

    I upgraded to the version 2.1 iPhone software on my original iPhone and after doing so my phone entered "emergency mode" and iTunes 8.0 gave me a message that said "info for activation could not be obtained from iPhone. Check SIM card.....". I rebooted the phone but it came up in this mode.
    A post on the AppleNova forum suggested starting the phone in recovery mode, which solved the problem and restored the phone to functional. To enter recovery mode you start with the phone powered off and while holding down the home button, plug in your USB cable. This brings up iTunes noting the phone is in recovery mode. Then you click restore and the phone is restored to prior settings which makes it functional again. My data was backed up so it restored such that I didn't lose any music, photos or contacts.
    The AppleNova thread is at:
    http://forums.applenova.com/showthread.php?p=586157#post586157
    I don't know how widespread this problem is, but its quite frustrating and adds another little bit of tarnish to Apple's otherwise gleaming reputation.

    THANK YOU SO MUCH!
    You have no idea how frustrated I was last night. I couldn't figure out what the heck the problem was, but I'm having the same exact problem as you. I'm going to try this fix and see if it works.

  • Iphone 4 not able to activate after upgrade IOS 7.1.2

    i bought 2nd hand iphone 4 which upgrade the IOS to 7.1.2, i had done the reset the phone, but now i having problem to activate it with the error "Unknown Error occurred (0xE80002D)" & "Unknown Error occurred (0xE800004)" how to solve it ?

    Hey JYTF1975,
    That is never a good time when you are getting error messages when you are trying to restore. If you are getting a bunch of variations of error 0xE and on windows, take a look at the article below for some troubleshooting options to get it back up so you can use your iPhone. 
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    https://support.apple.com/en-us/ts3221
    Take care,
    -Norm G. 

  • Docking station display doesn't activate after upgrading display driver

    I have a ThinkPad T400. I just reinstalled Windows 7 (64-bit) using a clean image. The automatic display driver that Windows found was for ATI Mobility Radeon HD 3400 Series from 2010. When I put the laptop onto the ThinkPad docking station, the monitor, connected by VGA, was detected just fine and the screen came up in the correct resolution. However, I was having problems with slow cursors in various programs (e.g., Mozilla Firefox and Microsoft Office) and hangs in Office that seemed related to the display driver. So I downloaded the Switchable Graphics Driver and installed it (http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t40... That solved the other problems, but now when I put my laptop onto the docking station or wake it from sleep while it's docked, the monitor never turns on -- the picture stays on the (closed) laptop screen. The only way I've found to get the monitor to turn on is to open the laptop and use Windows-P to turn it to "projector only" (while still docked) and then it finds the monitor (and gives me an error message saying that no projector was detected). Sometimes when this happens it tries to keep the laptop screen resolution, which is unfortunately not the same as my monitor. When I revert to the old driver, the docking station works just fine but other programs hang or are slow.
    Please help! I really need my docking station to work, but I would also like to use hardware accelerated graphics rendering, which the other programs appear to want. (Or I need a way to turn it off so that it doesn't try to do that and I'll see if non-accelerated graphics work.)

    Hi @dinesh_kumar ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6154tx Entertainment Notebook and downloading Windows 8.1 Enterprise. This is not compatible with Windows 7 Home Premium with 64 Bit. Here is a link to the Windows 8.1 upgrade assistant.
    Here is a link to system requirements from Windows for Windows 8.1 Enterprise.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • IPhone 3GS does not activate after upgrade to iOS 5.1

    I never had any issues upgrading the iphone 3GS in the past. Last January I got my iphone upgrade to iPhone 4S, which made my 3GS redundant, so I had asked Vodafone uk to get it unlocked for me so that I can use it with other networks. Vodafone sent the information to apple and got the iphone unlocked for me. The OS was 4.1 then. A few days ago I came to India on my business trip for 4 weeks and inserted an indian SIM and it worked fine. but just yesterday I tried to upgrade it to iOS 5.1 through itunes and it got stuck in recovery mode then I tried to restore it and found that it has indeed loaded the iOS 5.1 as it asked me questions relating to language and country and tried to access wifi for iCloud. But it has got stuck just there and says no SIM inserted.
    Please help .....

    This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
    If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

  • IMessage and FaceTime won't accept my Apple ID after upgrading to Mountain Lion

    iMessage and FaceTime won't accept my Apple ID in order to activate after upgrading to Mountain Lion on my MacBook Pro.
    My Apple ID works to sign in to the App store as well as on my iphone and iPad.
    What do I need to do?

    This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
    Troubleshooting Apple ID activation
    After each step, toggle  iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
    If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    In Settings > General > Date & Time, ensure that Set Automatically  is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Enable  iMessage and FaceTime while connected to another Wi-Fi network in a different location.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • HT1695 how do i activate my iphone 4 after upgrading to ioS 5.1

    how do i activate my iphone 4 after upgrading to ioS 5.1

    I'm not sure I understand what you're asking, but I'll try to answer!    You can either connect to iTunes and set up and activate there, or you can also use the setup assistant to set up your iPhone.  As far as carrier activation, you'll have to follow the protocol that your carrier uses.  Either switch SIM card, or call the number they use to allow device activation.  Is that what you were wanting to know?

  • Why can't i activate my iphone 3gs after upgrading it to ios 6?

    why can't i activate my iphone 3gs after upgrading it to ios 6?
    It says,
    ''There is no sim card installed in the iphone you are attempting to activate''
    Thanks for your help in advance!
    Kayl07

    There are several common causes for this problem:
    Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
    You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
    Your phone is jailbroken or otherwise hacked.

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

Maybe you are looking for