1.0.1 did NOT fix problem when playing music while web surfing

My iPhone (like many others) will often crash when I surf the internet and play music simultaneously. I was hopeful the 1.0.1 update would fix this, but I can confirm that it did NOT fix the problem.
Does anyone know if this problem was supposed to be fixed by this update, and if not, when it is going to be fixed?
Love the phone, but am quite annoyed by this problem.

I can only provide anecdotal experience, but prior to the 1.0.1 update, I was rarely able to surf on Safari (as opposed to surfin' safari) for more than 5-10 minutes without the iPod portion crashing. Pages with heavy javascript or forms to fill in seemed to hasten the process.
After the update, I fired up the iPod alter-ego then surfed for 30 or so minutes, spent a lot of time in the Apple Discussions (which always crashed it) and had nary a crash.
Again, only anecdotal, but I was feeling like this bug is much better now.
Jim

Similar Messages

  • For about 1 week Iphone 5 looses time.  Have to restart to correct time.  Usually looses up to 15 min.  Did update but did not fix problem.

    For about a week now my iPhone 5 has started loosing time.  I have done updates but did not fix problem.   Have to restart phone for it to correct itself.

    Have you tried resetting the network settings? Go to settings, general, reset, reset network settings.

  • Creative Roar SR20A continuously prompts "TeraBass On/Off" When Playing Music While Charging

    I have noticed that when playing music for a while (over an hour or so) on the Roar while charging causes the speaker to prompt "Tera Bass On" and "Tera Bass Off" continuously every one or two seconds. This continues till I switch off the charging and then its functions normally. I believe this happens once the unit gets fully charged. Has somebody faced this issue??? Is there a fix for it??? This is an annoying bug in the firmware.

    Originally Posted by apratimsau
    I have noticed that when playing music for a while (over an hour or so) on the Roar while charging causes the speaker to prompt "Tera Bass On" and "Tera Bass Off" continuously every one or two seconds. This continues till I switch off the charging and then its functions normally. I believe this happens once the unit gets fully charged. Has somebody faced this issue??? Is there a fix for it??? This is an annoying bug in the firmware.
    Hi apratimsau,
    It does not seem normal. Please contact our Support at the link.
    Cheers,
    JL-CL

  • IChat latest update 3.1.6 did not fix problem

    A few days ago, I updated from OSX 10.4.7 to 10.4.8 and now no one can see video of me in a video chat, I can see them, and they see themselves. I then updated iChat today 3.1.6 and it has still not fixed the problem. Is anyone else having this problem?

    Steve,
    Thanks for that. I'm not sure if I was clear. Apart from the minor glitch with iChat, which actually doesn't bother me at all, my machine is fine and 10.4.8 works as I expect it to. As for iChat, it works perfectly too.
    The glitch with the update is just a curiousity to me. I realise that the update represents some additional security benefit, but whatever that is I can do without it if the alternative is a reinstall of the OS.
    Your download, install, update procedure is exactly what I had to do for the combo updater. I've had more fun!
    Anyway, as per my earlier post, I've just repeated that approach with the iChat update and two reinstalls. It has not worked.
    Regards,
    Mark

  • How to fix error loading webpage - keep getting "server not found" repeatedly & have reloaded firefox and tried everthing - quite annoying and did not have problem when I first began using firefox - I am ready to try another browser

    How to fix "server not found"

    Does this happen on all websites? If so then you may have to update the permissions in your firewall application to allow the new Firefox.

  • Blue screen keeps popping up, format and reinstall did not fix problem

    My wife has a Toshiba Satellite A55-S3063 Laptop with Windows XP Home. After we got married in 2008, I noticed SP2 was installed and there was an update ready. She said SP3 never installed and I couldn't get it to install. Even with Registry checks, removing anti-virus, and other suggestions from the MS site, I still couldn't get it to install. I told her we would do a format and reinstall "someday." A month ago, the blue screen of death started coming on regularly and the computer would restart quickly after flashing the blue screen. I did a System Restore from a previous point, but a few days later, it started happening again. I decided to take this opportunity to do a format and reinstall, so I backed everything up. Her computer came with a recovery disk that only gives you the option to do a format and reinstall, not a recovery like I've done on other computers. So the format was really our only option. I did this and installed all the Service Packs (including 3). I put a new battery in (that we hadn't used before) because the old one didn't last very long and I got a blue screen and restart the next time I turned on the computer. AFter that one time, it worked fine the rest of the day. The next day I plugged in the external hard drive (Simpletech 500gb) to move her info back over. A few minutes later, blue screen and system crash. On restart, same thing. Next restart, just a black screen. I decided no big loss if I reinstall again, so I reinstalled again. Now I just get the blue screen during setup. Right after I type in the computer name and click "Next" I can hear the hard drive spinning and then the blue screen and system restarts. The blue screen is not up long enough to read, so I can't give you an error message. 
    I can only assume this a hardware problem, but I don't know what or how to fix it. We have her sister's old computer which is the same computer, bought at the same time, but stopped working years ago. So with explicit instructions, I might be able to retrieve hardware from that. Except the hard disk; her sister kept that and is using it as a small external drive. 

    this link should give you some info on how to get it open to everything
    A55 disassembly
    toshiba doesnt offer any manuals so this is about as good as you will find
    hope that helps
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

    Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
    "This application has failed to start because CoreFoundation.dll was not found.  Re-installing the application may fix this problem.
    I uninstalled and re-installed itunes and the message still appears.
    How do I fix this??
    Thank you

    With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

  • IPhone 4s is turned on, but the screen is unresponsive. Reset did not fix problem.

    My iPhone 4s is completely charged and was turned off last night, but the screen is unresponsive when I try to turn it on. The screen has a tan background with pale skinny stripes with a black fuzzy frame. I've already tried a reset, but I can't seem to get it to work. Also, before I turned it off, the screen would shake near the bottom when I had certain apps open. Not sure how to fix this, either. I've only had the phone for a week...Help?

    Mountain Ryanne wrote:
    I've only had the phone for a week...Help?
    Make an appointment at an Apple store.

  • KB2509007 did not fix problem with Install Updates hanging at 0% during OSD task sequence

    Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
    This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
    here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
    Then I found
    this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
    and BOOM, the updates installed and I captured my gold image. This was about a week ago.
    Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
    so I am unsure what the issue could be now.
    Does anybody have any experience with this issue? Thanks in advance for any help!
    UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

    Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
    This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
    here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
    Then I found
    this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
    and BOOM, the updates installed and I captured my gold image. This was about a week ago.
    Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
    so I am unsure what the issue could be now.
    Does anybody have any experience with this issue? Thanks in advance for any help!
    UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

  • Billed for Premium Tech Support That Did Not Fix the Problem

    i too was scammed last night by a premiun tech support rep...he assured me that the problem i was having with my pc
    could be repaired and pursuaded   me to purchase the 10 month plan for $14.00 month also said if i canceled prior to the 10 mos i would be charged a $59.99 fee.......I told him I would sign up if he could assure me the pc problem would be resolved.
    He also assusred me that if  it could not be resolved  to ask to be transfered to the billing department to cancel the  the plan   I confirmed this with him at least 3 times and he assured me I would not have to  pay and I could cancel with no monetary obligation if the problem on my pc could not be resolved....well it was not  and my computer was left in worse condition than when the premium support tech began working on it...the support tech worked on my computer for 3 and 1/2 hoursI was on the phone with him until 3:30 am....he apologized and said he did not expect the outcome of what happened to my computer. well needless to say when i called billing i was told I was liable for the $59.00 early cancelation fee  it did not matter that the tech did not repair the problem or that he left my computer in worse condition than when he  began working on it.........so technically what they are saying is that I have to pay for them creating problems on my pc that did not exist before I called them   I  The sales rep I spoke to was "scott : he said he was in massachusetts..I spoke with Eric in BIlling and he said he would note on my account what I had told him and asked me to call after the charge appears on my phone bill to see if i could have it removed...i also called billing again today and spoke with another billing rep and she said she also would note my problem on my account and that hopefully the $59.00 fee would be removed..it is very disppointing to know that Verizon Hires people that lie to consumers.....all of their employee conversations to customers need to be recorded and monitored. I received a recorded message from verizon this am asking if i was satisfied with the service i received from tech suppoort with #1 being the least satisfed  which of course described my experience with them.  If My tele phone bill does not reflect the cancellation  of the $59.00charge I will definitly pursue this matter further....

    I was also billed on July 15, 2014 for tech support that did not fix my computer problem. 
    I was billed $99.99 to my credit card to a tech in the country of India.
    I tried to get my money back but the number I was referred to would not answer.
    I immediately went to my bank which took all of the info and changed my credit card number.
    The bank also did their own investigation and said it seemed to be a scam.  My money was redeposited into my account within 36 hours - not because of anything Verizon did, but my BANK!!   I was so grateful.
    Such service from Verizon's tech department is unethical and inexcusable.
    Verizon customers deserve better tech service than this.  "Ma Bell" would turn over in her grave if she knew how far down the service of the original phone company has gone. It's a disgrace!!  A SCAM perpetuated and sanctioned by Verizon.
    I complained to the Verizon Customer Correspondance Claim Dept.  Do you think they will straighten this mess out?  I doubt it - I am a retiree with an excellent payment record.
    They don't care.  This hurts the American economy.

  • After installing VLC (64bit), my MBP only reads CDs and ejects DVDs. Uninstalling VLC did not fix the problem.  What do I do?

    I have recently installed VLC media player (64bit), played a movie file on a DVD+RW for 30 seconds, then decided to stop the movie.  I poped the DVD out, and a minute later I reinserted the same DVD, it was ejected after 10 second.  Now when ever I insert the DVD in my MBP it gets ejected.  It reads my CDs but does not read my DVD. Uninstalling VLC did not fix it.  I am not even sure at this if VLC caused the problem.  What do I do?

    Have you rebooted since uninstalling VLC?

  • Charged for 2 FREE service calls/costing $70 each and they DID NOT fix the problem.

    My service was interupted DAILY between 2:45pm - 6pm and sometimes 7pm. I contacted someone in the chat room and explained, they said they would send someone out and there would be NO CHARGE...I made sure and they said, Rest assured that there will be no charge" They did send someone out, around 11am, and said, hey, it's a gold signal splitter, I'll replace it with this new one. Well, they did. A few minute job. Well, 2:45pm rolled around and guess what? SIGNAL LOSS on tv and cable...till about 6pm. Well, next day i contacted them, and same scenario. They sent someone out-around 12pm,  and said, oh the coaxial connecters are a "little loose". Well, he tightened them...a few minute "fix". Well, 2:45pm rolls around and AGAIN SIGNAL LOSS, no internet and NO TV till 6:30pm. Well, I've had enough so I cancelled service..Now I check my bill and 2 service calls for $70 each plus $15 tax totalling $155. I talked to someone in the chat room and told them this scenario. Well, they said they can waive 1 of the service call, but since my equipment is owned by me and not rented, I have to pay and that in their notes, it never said that I would get a free service call. The problem is that it NEVER was fixed and the problem had nothing to do with the signal splitter or connections, but something in the neighborhood, in which I saw 2 Xfinity service trucks on my street when I came home. So I am out $85 for something they did not fix-apparently something going on connectionwise in the neighborhood. ALSO WATCH OUT FOR CHAT ROOM REPS THAT SAY IT WILL BE A FREE SERVICE CALL. THEY LIE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Anybody know how I can contact the CEO of Xfinity? 

    I was also billed on July 15, 2014 for tech support that did not fix my computer problem. 
    I was billed $99.99 to my credit card to a tech in the country of India.
    I tried to get my money back but the number I was referred to would not answer.
    I immediately went to my bank which took all of the info and changed my credit card number.
    The bank also did their own investigation and said it seemed to be a scam.  My money was redeposited into my account within 36 hours - not because of anything Verizon did, but my BANK!!   I was so grateful.
    Such service from Verizon's tech department is unethical and inexcusable.
    Verizon customers deserve better tech service than this.  "Ma Bell" would turn over in her grave if she knew how far down the service of the original phone company has gone. It's a disgrace!!  A SCAM perpetuated and sanctioned by Verizon.
    I complained to the Verizon Customer Correspondance Claim Dept.  Do you think they will straighten this mess out?  I doubt it - I am a retiree with an excellent payment record.
    They don't care.  This hurts the American economy.

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • TS3899 I have upgrade my to iOS7 and my company recently upgrade to Exchange 2010. My emails are not synching to my inbox. I can see all of my sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    You need to have a different Apple ID for each of the other devices.

  • Verizon ellipsys update did not fix the app memory problem!

    The Verizon update for the ellipsys did not fix the original issue with the storage of apps on the device. The update gave you the capability to move apps to your tablet space; but, the device's pre installed apps cannot be moved. Those apps take up roughly 500mb of the allotted 1gb of space.
    This tablet was meant for my parents to use and they can't be sitting here umistalling and disabling preinstalled apps just to use there tablet.
    Please include in the next update a reallocation of memory for more app storage space. I have already moved all available apps over to the tablet space: I have 4 gigs open on their tablet and only 200mb for apps? Crazy sauce...

    I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

Maybe you are looking for

  • Drop Down Menu List Not Visible

    Hi I am using a Horizon menu across top of page for user to select from a list of pages to go to but for some reason the menu drop down list is not fully visible but rather appears behind other elements on the page such as a flash video and a google

  • Photoshop Elements 9

    I purchased photoshop elements 9 about 18 months ago. Recently my house was burglarized recently and my computer (and the photoshop CD) was stolen. I was looking for Photoshop 9 to download it again but could not find it on your site. Is it still ava

  • How do i import photos from my iPhone to my macbook air in os x Yosemite

    Im trying to get photos from my phone to my macbook air and no option to do that has come up in the new os x yosemite.

  • Application Manager refuses to install

    Hi, I'm having a substantial probelm with the Application Manager (AAM). A few days ago I performed an automatic update of Audition, but the progress got stuck at around 50%. A few minutes later the computer totally crashed and after a restart Window

  • Create a right click event...

    Hi, I want to create a right click event programmatically in my Swing application. Can anyone tell me how do I do this? I have the listener and the code that works for my required functionality, but it requires me to right click explicitly. And, I wa