1 minute schedule jobs stop withouyt any reason

Hello. I have a few jobs on my sql server that runs every minute. Sometimes they stop without any reason (like they were stuck). To solve this problem I need to manully "start job at step X". I use those jobs to insert data into tables and when I
searched on those I can see holes about 12-24 hours (hours where those jobs didn't run). Can you please help me finding out the problem?

Did you check Job history? Does it show any error message or something that might help you?
It may be because of locking/blocking. Objects used by your jobs are being used by some other resouces that makes job in wait state for longer. (just a guess)
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]
I verified the job history, there eere not any erros over there. All I can see there is the last run of the job. I need to add that jobs stop working at around 23:57/23:58 PM. Those tables are only used be my so they dont block, I access them only 1-2 times
/ day with <nolock). I seached on SQL log, event viewer, traces, job history (jub runs for about 30-40 seconds, it did not run more then 1 minute)

Similar Messages

Control Center status running scheduled jobs stops when DB is shutdown

I have scheduled jobs in the Control Center of OWB, and the status is "Running" (Green Arrow ->), but everytime we stop and start the database I have to start the schedule job again under Status.
Is there any way to fix this so that when the database stops and restarts somebody does not have to go into the Control Center and restart the jobs that are scheduled?
Thanks

I'm been told that it's a bug in the current version of OWB and to fix this problem we should upgrade to 10.2.0.3.

Print jobs stopping for no reason

Hi,
For some reason print jobs simply stop when sent to server print queues. The client queue shows "Connecting to 192.168.1.201 at port 631..." when the job is sent, then it halts & the job sits in the queue.
I've tried recreating the queues by deleting the printers from the server system prefs, adding them in again (as both LPD and IPP) by specifying their IP addresses. Does it matter what I spec for the queue name? Is it better to use the default or something that matches
There's some suspicious stuff in the print service log (see below), such as "shared == 0" for each of the queues & the final "master LPR sharing state = 0" after rebooting the server. If these are the culprits, how do I change the sharing state?
I [21/Jan/2009:10:51:34 -0800] Starting Print Service (v10.4.140)
I [21/Jan/2009:10:51:34 -0800] Verifying server resources...
I [21/Jan/2009:10:51:34 -0800] ...restoring server default: UseNetworkPrinters = NO
D [21/Jan/2009:10:51:34 -0800] setting Use Network Printers = 0
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service IPP
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service LPR
D [21/Jan/2009:10:51:34 -0800] Registering queue "1st Lab - HP LJ4000 laser"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] Registering queue "2nd Copy - Canon IR5055 copier"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] Registering queue "2nd Staff - Brother HL8050 laser"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] setting master LPR sharing state = 0
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service SMB
D [21/Jan/2009:10:51:34 -0800] sync'd with smbd for configuration reload
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service PAP
I [21/Jan/2009:10:51:34 -0800] Print Service startup completed
I [21/Jan/2009:12:14:10 -0800] Re-loading Print Service settings after restart.
D [21/Jan/2009:12:14:10 -0800] setting master LPR sharing state = 0
What am I doing wrong? Any help would be appreciated, even a pointer in the general direction.
Thanks,
Roland

Tiger: Start Applications/Utilities/Printer Setup Utlity
Menu: Printer Setup Utlity/Reset Printing System...
Leopard: System Prefs/Print & Fax/Right(Ctrl)-Click on Printer/Reset Printing System...

HTTP download stops without any reason.

Hi,
I wrote the following code to download different parts of the same URL in different threads. The object manager is a custom class which manages the various threads in each download.
public void run() {
          try {
               byte [] buffer = new byte[1024];
               URLConnection conn;
               if(proxyAddr != null)
                    conn = src.openConnection(new Proxy(Proxy.Type.HTTP, proxyAddr));
               else
                    conn = src.openConnection();
               conn.setRequestProperty("Range", "bytes=" + (start + completed) + "-" + end);
               int response = ((HttpURLConnection)conn).getResponseCode();
               if(response != 200 && response != 206)
                    manager.failConnection();
               BufferedInputStream bin = new BufferedInputStream(conn.getInputStream());
               byte [] data = new byte[1024];
               int readLen;
               manager.addConnected();
               if(start == 0) {
                    System.out.println("Jing: " + end);
                    conn.setReadTimeout(5000);
                    System.out.println(conn.getReadTimeout());
               int cnt = 0;
               while((readLen = bin.read(data)) != -1
                     && canContinue) {
                    synchronized(dest) {
                         dest.seek(start+completed);
                         dest.write(data, 0, readLen);
                    synchronized(this) {
                         completed += readLen;
                         if(start == 0) {
                              System.out.println("hi" + cnt++);
                              System.out.println(completed);
               if(start == 0)
                    System.out.println("Read: " + readLen + "\t" + start + "\t" + end);
               manager.addFinished();
               bin.close();
          } catch(IOException e) {
               manager.failConnection();
               e.printStackTrace();
     }For some URLs, the thread which downloads the first part of the file begins the download and runs along with other threads but at some unpredictable point waits to read data infinitely, in spite of the fact that I've set the timeout to 5 secs. But, the other threads which download remaining parts of the file finish their downloads successfully.

I've set the timeout before opening the InputStream.
The download still stops at random places. However, by catching the SocketTimeoutException, I'm able to re-establish the connection and download the remaining content.
Thanx for ur help

Dba scheduler jobs not shown any data in dataguard

Hi All,
If I query the following sql statement (select * from dba_scheduler_jobs) in primary database we can able to see the data, But I have tried the same sql statement in dataguard not retrived any data. Hence can you please help me out regarding this.
DB version: 11.2.0.3
OS version: 5. 10 solaris
Note: dba_jobs view are fine in both the databases.
Regards
RK

You should load the data into a third, background sheet that the user cannot see[Sheet3]. Then parse the [Sheet3] rows for data, copy the rows with data to [sheet1] and the rows without data to [sheet2]
Something like this for each row:
    Sheets(3).Select
    Range("A2").Select
    Range(Selection, Selection.End(xlToRight)).Select
    If Application.Worksheetfunction.CountA(Selection)> 0 Then
     'copy/paste into sheet 1
    else
       'copy/paste into sheet2
     End If regards,
Robb Salzmann

How to stop a scheduled job using OMB*Plus ?

Hello everyone,
I use a OMB*Plus script to deploy a project in various environments. This includes scheduled jobs.
In this context, I need to stop the schedules of the previous versions to avoid a script crash.
I found the OMBSTOP command thad could do, but I need to retrieve the job ID of the schedule I want to stop. And I don't know how to get the Job ID.
I could get it from a previous launch and save it somewhere, but it wouldn't work if the schedule was manually stopped and restarted. Maybe is there a command that lists the running / scheduled jobs and their IDs? I didn't find it.
Thanks in advance for your help.
Cedric.

Frankly, I cannot see where this is available via pure OMB+, however you could back-door it if if you can figure out how to get these values from the public views (I would guess from the "Scheduling Views" section at http://download-east.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/toc.htm).
Then you could use my SQL library from OMB+ to get these values and stop the schedules before deploying. you can save this file as omb_sql_library.tcl and then just "source /path/to/omb_sql_library.tcl in your own script to make the functions available in your script.
{code}
package require java
# PVCS Version Information
#/* $Workfile: omb_sql_library.tcl $ $Revision: 1.0 $ */
#/* $Author: $
#/* $Date: 03 Apr 2008 13:43:34 $ */
proc oracleConnect { serverName databaseName portNumber username password } {
# import required classes
java::import java.sql.Connection
java::import java.sql.DriverManager
java::import java.sql.ResultSet
java::import java.sql.SQLWarning
java::import java.sql.Statement
java::import java.sql.CallableStatement
java::import java.sql.ResultSetMetaData
java::import java.sql.DatabaseMetaData
java::import java.sql.Types
java::import oracle.jdbc.OracleDatabaseMetaData
# load database driver .
java::call Class forName oracle.jdbc.OracleDriver
# set the connection url.
append url jdbc:oracle:thin
append url :
append url $username
append url /
append url $password
append url "@"
append url $serverName
append url :
append url $portNumber
append url :
append url $databaseName
set oraConnection [ java::call DriverManager getConnection $url ]
set oraDatabaseMetaData [ $oraConnection getMetaData ]
set oraDatabaseVersion [ $oraDatabaseMetaData getDatabaseProductVersion ]
puts "Connected to: $url"
puts "$oraDatabaseVersion"
return $oraConnection
proc oracleDisconnect { oraConnect } {
$oraConnect close
proc oraJDBCType { oraType } {
#translation of JDBC types as defined in XOPEN interface
set rv "NUMBER"
switch $oraType {
"0" {set rv "NULL"}
"1" {set rv "CHAR"}
"2" {set rv "NUMBER"}
"3" {set rv "DECIMAL"}
"4" {set rv "INTEGER"}
"5" {set rv "SMALLINT"}
"6" {set rv "FLOAT"}
"7" {set rv "REAL"}
"8" {set rv "DOUBLE"}
"12" {set rv "VARCHAR"}
"16" {set rv "BOOLEAN"}
"91" {set rv "DATE"}
"92" {set rv "TIME"}
"93" {set rv "TIMESTAMP"}
default {set rv "OBJECT"}
return $rv
proc oracleQuery { oraConnect oraQuery } {
set oraStatement [ $oraConnect createStatement ]
set oraResults [ $oraStatement executeQuery $oraQuery ]
# The following metadata dump is not required, but will be a helpfull sort of thing
# if ever want to really build an abstraction layer
set oraResultsMetaData [ $oraResults getMetaData ]
set columnCount [ $oraResultsMetaData getColumnCount ]
set i 1
#puts "ResultSet Metadata:"
while { $i <= $columnCount} {
set fname [ $oraResultsMetaData getColumnName $i]
set ftype [oraJDBCType [ $oraResultsMetaData getColumnType $i]]
#puts "Output Field $i Name: $fname Type: $ftype"
incr i
# end of metadata dump
return $oraResults
# SAMPLE CODE to run a quick query and dump the results. #
#set oraConn [ oracleConnect myserver orcl 1555 scott tiger ]
#set oraRs [ oracleQuery $oraConn "select name, count(*) numlines from user_source group by name" ]
#for each row in the result set
#while {[$oraRs next]} {
#grab the field values
# set procName [$oraRs getString name]
# set procCount [$oraRs getInt numlines]
# puts "Program unit $procName comprises $procCount lines"
#$oraRs close
#oracleDisconnect $oraConn
{code}
So you would want to connect to the control center, query for scheduled jobs, stop them, and then continue on with your deployment. I assume that you also need to pause and check that an scheduled job in mid-run has time to exit before moving ahead. You could do a sleep loop querying against system tables looking for active sessions running mappings and waiting until they are all done or something if you really want to bulletproof the process.
Hope this helps,
Mike

Error when scheduling job (JOB_SUBMIT) when execute PC in WAD

Dear BIers,
I execute a Process Chain in commond button of WAD, however, I got the error message:
Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
Any suggestions are appreciated.
B.R
Gerald

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

How to stop a Scheduler Job in Oracle BI Publisher 10g

Hello!
Can someone tell me how can I stop a scheduler job in Oracle BI Publisher 10g?
I scheduled a bursting job to run a report but is running during two days.
I would like to stop it.
Thanks.
Edited by: SFONS on 19-Jan-2012 07:16

Unfortunately there is no way to stop a job once it is being executed. Yes as you read, it is not possible once job has started.
Same thing applies for running queries.
Once queries are sent to the DB BIP loses control over them. The message you see (if any) "Click Here to Cancel" does not stop any query
it is just a message.
I guess you will have to stop/kill the process in your DB
regards
Jorge
p.s If you consider your question answered then please mark my answer as *"Correct"* or *"Helpful"*

BI Scheduler doesn't stop Publisher scheduled jobs

Hi guys!
We are facing the issue that we want to stop all Publisher scheduled jobs, so we went to "report job history" and marked all jobs as "cancelled". That jobs gets the status of "cancelling" but never stops. Any idea? We had restarted coreaplication server but it does not help.
Any workaround to "delete" that jobs?
Thanks for your time! Any help will be appreciated.
Regards,
Ariel

I am also facing same issue with BI Publisher Scheduler but showing below mentioned error while creating new job.
Error
"Job submission failed : Error occurred while scheduling the job. org.quartz.ObjectAlreadyExistsException: Unable to store Job with name: '-1' and group: 'weblogic', because one already exists with this identification."
Cheers.
Vishal

Stop Scheduled job which has no jobs in released status

Hello
I need to stop some back ground jobs, but in Sm37 i m not able to see any jobs in released status or scheduled status to cancel these job,the job are set to run in a frequency of 2 days
please let me know
Thanks
Praveen

Event triggered jobs can be configured in SAP directly ,,,
checkout this link below
http://help.sap.com/saphelp_45b/helpdata/en/fa/096e44543b11d1898e0000e8322d00/frameset.htm
Else you can use any SAP supported 3rd party tool for job scheduling
like Tivoli or any other tool
http://help.sap.com/saphelp_nw70/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
http://www.sap-press.de/download/dateien/1102/sappress_job_scheduling.pdf
Hope this will help you
Cheers
dEE

I rented a movie on iTunes and, really annoyingly, it has stopped 30 minutes before the end. Any suggestions? And how do I go about getting a refund?

I rented a movie on iTunes and, really annoyingly, it has stopped 30 minutes before the end. Any suggestions? And how do I go about getting a refund? Thanks so much for any suggestions.

Hi alefiya,
Welcome to the Support Communities! It sounds like the movie didn't completely download. This link will get you in contact with the iTunes Support Team. They will be able to review your account with you:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

My entire iCloud mail system is messed up. I have worked on this for days. It works sometimes after I restart my computer and then just stops for no reason. In addition when the mail stops it refuses to let me reboot my iMac. Any ideas?

I'm praying somebody here has an idea to help me. iCloud has suddenly gone nuts on my iMac. It works only when it wants to work and then stops for no reason. When it stops I am no longer able to click the mail icon and open any mail even the old stuff that was there. No changes were made to my computer. This all started out of the blue. When the mail stops working it will not close out to allow me to restart my computer. It won't even allow a forced quit. No changes were made to my machine. My iPhone still get mail but only after I click the mail icon. It does not pull mail in and show how many new emails I have like it did before. I have a me.com email if that helps. Any ideas would be truly appreciated.

Stewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck

My iPod 5 has recently updated to iOS 7.0.3. I have noticed something where my internet willonly work for about 2-3 minutes and then stop working. It is not our internet, because all of our other appliances work completely fine. Any help?

My iPod 5 has recently updated to iOS 7.0.3. I have noticed something where my internet will only work for about 2-3 minutes and then stop working. It is not our internet, because all of our other appliances work completely fine. Any help?

I did not mean to click the "this solved my question button by the way.
I have tried most of this, except for a couople of things i currently cannot due. The apps that are acting up the most are YouTube an Vine. Facebook and Safari work fine.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

Print job stopped without reason

hi, i am connected to a network printer. whenever i try to print the job is stopped unexpectedly and no error message is given. It just says: "Job stopped" in the printer window and stays in the active queue. if i click "start jobs" at the top it starts again and stops again. With out reason. The printer driver are installed. The kind is NRG DSc38u PS
Hope somebody can help.
thanks

When ever I have this problem I restart the printer by unpluging it and waiting for about 30 seconds. Then if that doesnt work, go hook the printer directly up to the computer and make sure that someting is not stoped in the printer que.
I hope that that helps you.

1 minute schedule jobs stop withouyt any reason

Similar Messages

Maybe you are looking for