10.1.3.5 Flow diagram in Bpel console does not show all details

Hello,
Does anybody experience this? And what would be the fix did we missed some configuration (hopefully)?
Bpel Console-> Instances->choose instance with executed pick activity->Flow (to see diagram of the flow)
10.1.3.5 does not show underlying activities in a picked onMessage action. However in a "Audit" all details are shown OK. In the attached example it's onAlarm - but it's happening with all of onMessages.
http://i41.tinypic.com/2jdj1ab.jpg
10.1.3.4 - shows underlying activities fine
http://i43.tinypic.com/vwtys1.png
BPEL process piece of source:
http://i39.tinypic.com/xm0hoy.png
thanks in advance!

Finally found info about this seems to be a known bug:
Patch 9162451: ACTIVITIES NESTED WITHIN PICK/ONMESSAGE/ONALARM ARE NOT DISPLAYED IN BPEL FLOW

Similar Messages

Assistance Needed: BPEL Console Does Not Appear when Loggin In

Hello,
I have installed Oracle BPEL Process Manager for Developers. I followed the directions completely and thoroughly. After finishing the installation, I Started the BPEL PM Server, I then started the JDeveloper, then I selected BPEL Console all through navigation from Start / Programs etc, on Windows XP. On my first attempt to start the BPEL Console I entered the password of "bpel" with a domain of "default". Upon pressing the Login button, a new web page appears that is completely blank with only the following Link:
http://memphis:9700/BPELConsole/default/index.jsp "MEMPHIS" is the name of my computer with the assigned port of 9700.
I can't get any further than this point. Any thoughts on how to proceed would be appreciated.
Kind Regards,
Dan

We're currently experiencing similar issue. We configured RoboSource Control to prompt for Check Out Comments. Now we get an error message when we tried to check out a topic in Robohelp and unable to make edits to the file. Could you please let us know how you were able to resolve this issue?

Bpel console is not showing the correct reply xml..

Hi,
i created a process with xsd:any i/p and xsd:any o/p. Inside the process i just assigning the(asign activity) input payload to output payload. In the console am reciving diffrent outputxml.it's removing deeplevel node as bellow.
case 1
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse> </BPELProcessBProcessResponse>
case 2
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<a></a>
</BPELProcessBProcessResponse>
case 3:
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<aaa><a></a><a><c></c></a></aaa>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<aaa>
<a></a>
<a>

</a>
</aaa>
</BPELProcessBProcessResponse>
am using BPEL 10.1.2.
it seems as bug.is this fixed.. any batch updates ??

please check this thread for above issue. This is not formated well becoz of the xml data input. i used & lt ; and & gt ; for posting xml.. in the forum.
Bpel console & this forum is not showing the proper xml..

BPEL Palette Does not show any activities

Hello All,
I downloaded BPEL designer and Manager from Oracle Website and wanted to do an exercise. I found that the palette area says the following message:
Wrong Version of either:
Internet Explorer, or
JavaScript Engine, or
XML Parser.
Please correct and re-laod.
What versions is it looking for and does some one have any idea about the same?
Thanks
Manoj Swaminathan

Here's more detail with links from Michal, which resolved the internal reports we had for this issue:
Yes, IE6 you need. Download latest at
http://www.microsoft.com/windows/ie/downloads/default.mspx
You also need:
MSXML 4.0SP2
http://www.microsoft.com/downloads/details.aspx?familyid=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&displaylang=en
Make sure you JS version is 5.6, if not download http://msdn.microsoft.com/library/default.asp?url=/downloads/list/webdev.asp

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

Follow-up posting flow type Credit for 870 does not exist

Hi SAP,
I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
Diagnosis
You have changed the data in such a way that follow-up postings have resulted.
No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
System Response
Processing cannot be continued without the flow type.
Procedure
Contact your system administrator.
Procedure for the system administrator
Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
Relevant relationship keys are:
2 IS-RE: Follow-up postings due to condition incr.
32 IS-RE: Follow-up posting due to condition reduct.
You have to assign reference flow types for these relationship keys.
This should help.
Regards, Franz

BPEL Processes are not showing in BPEL Console after OPMN restart

Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
Thanks

Vikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

SSIS Data flow item does not show on the Tools Choose Tools Item

I would like to add share point to my data source for my SSIS project.
After I installed Share Point Source and Destination list, I went to Tools Choose Tools Item, but SSIS Data Flow tab does not show. I went to SSIS Tools box, but the components are not there.
I would like to know are there any way to add Share Point Data source using SSIS.
Your help and information is great appreciated,
I use SQL Server 2012 and VS 2010.
Regards,
Souris,

Hi Souris,
I have installed the SharePointListAdaptersSetup-Beta-2012-01-28.msi in my SQL Server 2012 test environment, the SharePoint List Source and Destination adapters is listed in the Common type items of the SSIS Toolbox. To narrow down the root cause, please
try the following steps:
Make sure the SharePointListAdapters.dll exists in the C:\Program Files (x86)\Microsoft SQL Server\110\DTS\PipelineComponents folder.
Make sure it is installed to GAC successfully, the SharePointListAdapters.dll should exist in C:\Windows\Microsoft.NET\assembly\GAC_MSIL\SharePointListAdapters\v4.0_1.2012.0.0__f4b3011e1ece9d47 folder.
Refresh the Toolbox and check the Common type items.
Since the SharePoint List Adapter is a third-party component, I would suggest you ask a question in its dedicated discussion plate:
http://sqlsrvintegrationsrv.codeplex.com/discussions
Regards,
Mike Yin
TechNet Community Support

Bpel is not showing all DEPLOYED bpel processes

Hi,
The data is not transfering after refresh the instance.When i click tab BPEL processes it is not showing all DEPLOYED bpel processes it shows only two process that is
TaskActionHandler
TaskManager
Thanks
Edited by: userpat on May 24, 2010 7:09 AM
Edited by: userpat on May 24, 2010 7:11 AM

The issue is resolved as below.
Change the directory to the dir of individual process suitcase dir and run the bellow command
$ORACLE_HOME/bpel/bin/bpelc.sh -rev 1.0 -deploy default

Does not show anything in Flow tab in Interface

Hi,
I am new in ODI and doing File to File data transformation. I have done this successfully.
But here I used Global Context.
Instead of Global Context of I used my own Context that I have created in the Overview tab of interface the source , staging and target is not separated in the flow tab.
in overview tab of Interface if I select Optimization Context : my_Own_Context instead of global context and selected SYNOPSIS_MEMORY_ENGINE , in flow tab I got following message and Source, staging,target does not exist here:
the following message I getting in Flow tab:
Grag objects from the navigator here to model them. Alternatively, use the component paletter to create new objects.
Could you tell me why I getting this problem & how to resolve it.
Thannks
Edited by: 949936 on May 7, 2013 3:25 AM

Hi,
optimization context is used by ODI only to determine if staging source and target are the same or not. If you want to execute in another context you don't need to change opt context, but execute-> select context.
By the way you should have similar architecture between your context. Map your logical schema in your new context, close your interface and re-open it
Let us know

Bpel Server Does Not Catch Exceptions Thrown By Custom Xpath Functions

Hi.
I am using some custom xpath functions in a bpel process and whenever they fail I get an XPathExecutionError with summary:
XPath expression failed to execute.
Error while processing xpath expression, the expression is "<my function>", the reason is FOTY0001: type error.
Please verify the xpath query.
I am forcing my function to fail by giving a wrong input, which should result in an XPathFunctionException("Input does not respect format").
There is a note on Metalink with ID 458434.1 on this subject which says that patch 5926809 should fix my problem.
Patch 5926809 fixes Bug 5926809 - ORA:PARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE FOTY0001: TYPE ERROR.
I am using it, but it does not work :(
I am using version 10.1.3.3.0 of App Server with various patch sets, including fix for bug 5926809.
Has anyone suggestions on how to overcome this problem?
Thanks

Hello,
I am trying to add a custom xpath function to the BPEL server, and I see that you made it work. I am using Oracle SOA Suite 10.1.3.3 and jDeveloper 10.1.3.4. I am using this function inside an xsl mapping file, although I am able to compile and deploy the Bpel Process to the server, it stops mapping where I placed the function and I have not seen any meaningful message from the domain/log/ files.
Can you tell me how you did it?
I think you will tell me faster than Oracle support, I already placed an SR but they just give me superficial advice.
I appretiate your time and advice,
Guillermo

Oracle BPEL Console audit trail showing incorrect information

Hi all,
I am using Oracle BPEL 10.1.3.3 on Red Hat Linux server and 10g R2DB as the dehydration store.
My processes whether synchronous or empty are all executing properly without any error and in the 'Instances' tab under BPEL console they are shown as completed succesfully,however when I click on a particular instance and try to view the audit trail each activity is shown as pending .........but the Input and Output of those activities are all correct.
Infact even the Assign and Transformation activities are shown as pending.
Neither domain nor opmn log files show any error.
Can anyone please let me know what can be the possible cause?This is very urgent.
Thanks.

Audit trail (if it's turned on) is persisted only in database. What you see in console is just visual representation of data in XML fashion. But behind the scenes is allways database. Even in developer installation (which you are probably using) is database. It is Oracle Lite (Olite).

Upgraded to BPEL 10.1.3.4, but BPEL console doesn't list all the instances

Hi,
I have upgraded from Oracle SOA 10.1.3.1 to 10.1.3.4 and have a simple BPEL deployed. It works fine and I can see the instances while they are in the running state. But after they are completed, the search page doesn't list them. Is there a problem with the console? I can see all the completed instances in the CUBE_INSTANCE table in the olite database.
Thanks
Clement

Could you confirm if you have completed 1.6 steps successfully?
Is the process deploying fine and able to see the instance created on console ? Able to see the tasks created for the user on worklist app console ? 10.1.3.4 + any MLR ?

10.1.3.5 Flow diagram in Bpel console does not show all details

Similar Messages

Maybe you are looking for