10.3 Clients not autologging
Hey everyone.
I'm running 10.4 server and I'm trying to get iMac(G4) and Mac Mini(G4) clients running 10.3 to auto login into a student profile. Previously we were running 10.3 server and these clients were auto logging fine, but when we upgraded to 10.4 server the clients don't auto login to the student profile. I have a couple Intel Minis running 10.4 that seem to auto login fine, but the clients running 10.3 don't. Anyone know of issues and/or workarounds with 10.3 clients auto logging into a 10.4 server profile?
Custom Windows XP Pro Athlon X2 4400+, 2x1GB Corsair, 2x160GB RAID 0, 2x7800GT SLI
Any ideas on why 10.3 mini's wont autologin to a 10.4 server account?
Similar Messages
-
VPN clients not able to ping Remote PCs & Servers : ASA 5520
VPN is connected successfully. But not able to ping any remote ip or fqdn from client pc. But able to ping ASA 5520 firewalls inside interface. Also some clients able to access, some clients not able to access. I new to these firewalls. I tried most of ways from internet, please any one can help asap.
Remote ip section : 192.168.1.0/24
VPN IP Pool : 192.168.5.0/24
Running Config :
ip address 192.168.1.2 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
passwd z40TgSyhcLKQc3n1 encrypted
boot system disk0:/asa722-k8.bin
ftp mode passive
clock timezone GST 4
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 213.42.20.20
domain-name default.domain.invalid
access-list outtoin extended permit tcp any host 83.111.113.114 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.113 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq smtp
access-list outtoin extended permit tcp any host 83.111.113.114 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq www
access-list outtoin extended permit tcp any host 83.111.113.115 eq https
access-list outtoin extended permit tcp any host 94.56.148.98 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.117 eq ssh
access-list fualavpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0
92.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 1
2.168.5.0 255.255.255.0
access-list inet_in extended permit icmp any any time-exceeded
access-list inet_in extended permit icmp any any unreachable
access-list inet_in extended permit icmp any any echo-reply
access-list inet_in extended permit icmp any any echo
pager lines 24
logging enable
logging asdm informational
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging recipient-address [email protected] level emergencies
logging recipient-address [email protected] level errors
mtu outside 1500
mtu inside 1500
ip local pool fualapool 192.168.5.10-192.168.5.50 mask 255.255.255.0
ip local pool VPNPool 192.168.5.51-192.168.5.150 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound outside
nat (inside) 1 192.168.1.0 255.255.255.0
static (inside,outside) 94.56.148.98 192.168.1.11 netmask 255.255.255.255
static (inside,outside) 83.111.113.114 192.168.1.111 netmask 255.255.255.255
access-group inet_in in interface outside
route outside 0.0.0.0 0.0.0.0 83.111.113.116 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have no
been met or due to some specific group policy, you do not have permission to u
e any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy fualavpn internal
group-policy fualavpn attributes
dns-server value 192.168.1.111 192.168.1.100
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value fualavpn_splitTunnelAcl
username test password I7ZgrgChfw4FV2AW encrypted privilege 0
username Mohamed password Vqmmt8cR/.Qu7LhU encrypted privilege 0
username Moghazi password GMr7xgdqmGEQ2SVR encrypted privilege 0
username Moghazi attributes
password-storage enable
username fualauaq password E6CgvoOpTKphiM2U encrypted privilege 0
username fualauaq attributes
password-storage enable
username fuala password IFtijSYb7LAOV/IW encrypted privilege 15
username Basher password Djf15nXIJXmayfjY encrypted privilege 0
username Basher attributes
password-storage enable
username fualafac password VGC/7cKXW1A6eyXS encrypted privilege 0
username fualafac attributes
password-storage enable
username fualaab password ONTH8opuP4RKgRXD encrypted privilege 0
username fualaab attributes
password-storage enable
username fualaadh2 password mNEgLxzPBeF4SyDb encrypted privilege 0
username fualaadh2 attributes
password-storage enable
username fualaain2 password LSKk6slwsVn4pxqr encrypted privilege 0
username fualaain2 attributes
password-storage enable
username fualafj2 password lE4Wu7.5s7VXwCqv encrypted privilege 0
username fualafj2 attributes
password-storage enable
username fualakf2 password 38oMUuwKyShs4Iid encrypted privilege 0
username fualakf2 attributes
password-storage enable
username fualaklb password .3AMGUZ1NWU1zzIp encrypted privilege 0
username fualaklb attributes
password-storage enable
username fualastr password RDXSdBgMaJxNLnaH encrypted privilege 0
username fualastr attributes
password-storage enable
username fualauaq2 password HnjodvZocYhDKrED encrypted privilege 0
username fualauaq2 attributes
password-storage enable
username fualastore password wWDVHfUu9pdM9jGj encrypted privilege 0
username fualastore attributes
password-storage enable
username fualadhd password GK8k1MkMlIDluqF4 encrypted privilege 0
username fualadhd attributes
password-storage enable
username fualaabi password eYL0j16kscNhhci4 encrypted privilege 0
username fualaabi attributes
password-storage enable
username fualaadh password GTs/9BVCAU0TRUQE encrypted privilege 0
username fualaadh attributes
password-storage enable
username fualajuh password b9QGJ1GHhR88reM1 encrypted privilege 0
username fualajuh attributes
password-storage enable
username fualadah password JwVlqQNIellNgxnZ encrypted privilege 0
username fualadah attributes
password-storage enable
username fualarak password UE41e9hpvcMeChqx encrypted privilege 0
username fualarak attributes
password-storage enable
username fualasnk password ZwZ7fVglexrCWFUH encrypted privilege 0
username fualasnk attributes
password-storage enable
username rais password HrvvrIw5tEuam/M8 encrypted privilege 0
username rais attributes
password-storage enable
username fualafuj password yY2jRMPqmNGS.3zb encrypted privilege 0
username fualafuj attributes
password-storage enable
username fualamaz password U1YUfQzFYrsatEzC encrypted privilege 0
username fualamaz attributes
password-storage enable
username fualashj password gN4AXk/oGBTEkelQ encrypted privilege 0
username fualashj attributes
password-storage enable
username fualabdz password tg.pB7RXJx2CWKWi encrypted privilege 0
username fualabdz attributes
password-storage enable
username fualamam password uwLjc0cV7LENI17Y encrypted privilege 0
username fualamam attributes
password-storage enable
username fualaajm password u3yLk0Pz0U1n.Q0c encrypted privilege 0
username fualaajm attributes
password-storage enable
username fualagrm password mUt3A60gLJ8N5HVr encrypted privilege 0
username fualagrm attributes
password-storage enable
username fualakfn password ceTa6jmvnzOFNSgF encrypted privilege 0
username fualakfn attributes
password-storage enable
username Fualaain password Yyhr.dlc6/J7WvF0 encrypted privilege 0
username Fualaain attributes
password-storage enable
username fualaban password RCJKLGTrh7VM2EBW encrypted privilege 0
username John password D9xGV1o/ONPM9YNW encrypted privilege 15
username John attributes
password-storage disable
username wrkshopuaq password cFKpS5e6Whp0A7TZ encrypted privilege 0
username wrkshopuaq attributes
password-storage enable
username Talha password 3VoAABwXxVonLmWi encrypted privilege 0
username Houssam password Cj/uHUqsj36xUv/R encrypted privilege 0
username Faraj password w2qYfE3DkYvS/oPq encrypted privilege 0
username Faraj attributes
password-storage enable
username gowth password HQhALLeiQXuIzptCnTv1rA== nt-encrypted privilege 15
username Hameed password 0Kr0N1VRmLuWdoDE encrypted privilege 0
username Hameed attributes
password-storage enable
username Hassan password Uy4ASuiNyEd70LCw encrypted privilege 0
username cisco password IPVBkPI1GLlHurPD encrypted privilege 15
username Karim password 5iOtm58EKMyvruZA encrypted privilege 0
username Shakir password BESX2bAvlbqbDha/ encrypted privilege 0
username Riad password iB.miiOF7qMESlCL encrypted privilege 0
username Azeem password 0zAqiCG8dmLyRQ8f encrypted privilege 15
username Azeem attributes
password-storage disable
username Osama password xu66er.7duIVaP79 encrypted privilege 0
username Osama attributes
password-storage enable
username Mahmoud password bonjr0B19aOQSpud encrypted privilege 0
username alpha password x8WO0aiHL3pVFy2E encrypted privilege 15
username Wissam password SctmeK/qKVNLh/Vv encrypted privilege 0
username Wissam attributes
password-storage enable
username Nabil password m4fMvkTgVwK/O3Ms encrypted privilege 0
aaa authentication telnet console LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 outside
http 192.168.1.4 255.255.255.255 inside
http 192.168.1.100 255.255.255.255 inside
http 192.168.1.111 255.255.255.255 inside
http 192.168.1.200 255.255.255.255 inside
http 83.111.113.117 255.255.255.255 outside
http 192.168.1.17 255.255.255.255 inside
http 192.168.1.16 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn general-attributes
address-pool fualapool
address-pool VPNPool
default-group-policy fualavpn
tunnel-group fualavpn ipsec-attributes
pre-shared-key *
tunnel-group fualavpn ppp-attributes
authentication pap
authentication ms-chap-v2
authentication eap-proxy
telnet 0.0.0.0 0.0.0.0 outside
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:38e41e83465d37f69542355df734db35
: endHi,
What about translating the traffic on the local ASA (Active unit) for traffic received from the VPN tunnel to the internal interface IP address? You can try something like nat (outside,inside) source dynamic obj-VpnRemoteTraffic interface destination static StandbyIP StandbyIP
Regards, -
ORA-16191: Primary log shipping client not logged on standby.
Hi,
Please help me in the following scenario. I have two nodes ASM1 & ASM2 with RHEL4 U5 OS. On node ASM1 there is database ORCL using ASM diskgroups DATA & RECOVER and archive location is on '+RECOVER/orcl/'. On ASM2 node, I have to configure STDBYORCL (standby) database using ASM. I have taken the copy of database ORCL via RMAN, as per maximum availability architecture.
Then I have ftp'd all to ASM2 and put them on FS /u01/oradata. Have made all necessary changes in primary and standby database pfile and then perform the duplicate database for standby using RMAN in order to put the db files in desired diskgroups. I have mounted the standby database but unfortunately, log transport service is not working and archives are not getting shipped to standby host.
Here are all configuration details.
Primary database ORCL pfile:
[oracle@asm dbs]$ more initorcl.ora
stdbyorcl.__db_cache_size=251658240
orcl.__db_cache_size=226492416
stdbyorcl.__java_pool_size=4194304
orcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
orcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
orcl.__shared_pool_size=125829120
stdbyorcl.__streams_pool_size=0
orcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/orcl/adump'
*.background_dump_dest='/opt/oracle/admin/orcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='+DATA/orcl/controlfile/current.270.665007729','+RECOVER/orcl/controlfile/current.262.665007731'
*.core_dump_dest='/opt/oracle/admin/orcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=orcl
*.fal_client=orcl
*.fal_server=stdbyorcl
*.instance_name='orcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=stdbyorcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/orcl/udump'
Standby database STDBYORCL pfile:
[oracle@asm2 dbs]$ more initstdbyorcl.ora
stdbyorcl.__db_cache_size=251658240
stdbyorcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
stdbyorcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/stdbyorcl/adump'
*.background_dump_dest='/opt/oracle/admin/stdbyorcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='u01/oradata/stdbyorcl_control01.ctl'#Restore Controlfile
*.core_dump_dest='/opt/oracle/admin/stdbyorcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='/u01/oradata'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=stdbyorcl
*.fal_client=stdbyorcl
*.fal_server=orcl
*.instance_name='stdbyorcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=orcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.log_archive_start=TRUE
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_archive_dest='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/stdbyorcl/udump'
db_file_name_convert=('+DATA/ORCL/DATAFILE','/u01/oradata','+RECOVER/ORCL/DATAFILE','/u01/oradata')
log_file_name_convert=('+DATA/ORCL/ONLINELOG','/u01/oradata','+RECOVER/ORCL/ONLINELOG','/u01/oradata')
Have configured the tns service on both the hosts and its working absolutely fine.
<p>
ASM1
=====
[oracle@asm dbs]$ tnsping stdbyorcl
</p>
<p>
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:49:00
</p>
<p>
Copyright (c) 1997, 2005, Oracle. All rights reserved.
</p>
<p>
Used parameter files:
</p>
<p>
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.20)(PORT = 1521))) (CONNECT_DATA = (SID = stdbyorcl) (SERVER = DEDICATED)))
OK (30 msec)
ASM2
=====
</p>
<p>
[oracle@asm2 archive]$ tnsping orcl
</p>
<p>
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:48:39
</p>
<p>
Copyright (c) 1997, 2005, Oracle. All rights reserved.
</p>
<p>
Used parameter files:
</p>
<p>
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.10)(PORT = 1521))) (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED)))
OK (30 msec)
Please guide where I am missing. Thanking you in anticipation.
Regards,
Ravish GargFollowing are the errors I am receiving as per alert log.
ORCL alert log:
Thu Sep 25 17:49:14 2008
ARCH: Possible network disconnect with primary database
Thu Sep 25 17:49:14 2008
Error 1031 received logging on to the standby
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-01031: insufficient privileges
FAL[server, ARC1]: Error 1031 creating remote archivelog file 'STDBYORCL'
FAL[server, ARC1]: FAL archive failed, see trace file.
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Sep 25 17:49:14 2008
ORACLE Instance orcl - Archival Error. Archiver continuing.
Thu Sep 25 17:49:44 2008
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
Thu Sep 25 17:49:46 2008
Thread 1 advanced to log sequence 48
Current log# 2 seq# 48 mem# 0: +DATA/orcl/onlinelog/group_2.272.665007735
Current log# 2 seq# 48 mem# 1: +RECOVER/orcl/onlinelog/group_2.264.665007737
Thu Sep 25 17:55:43 2008
Shutting down archive processes
Thu Sep 25 17:55:48 2008
ARCH shutting down
ARC2: Archival stopped
STDBYORCL alert log:
==============
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:49:27 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Thu Sep 25 17:51:38 2008
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:55:16 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Please suggest where I am missing.
Regards,
Ravish Garg -
Client not being recognized on Xsan Admin
I am not able to see both my client computers on the Xsan admin page, and there are some strange things happening.
-My setup consists of two G5 computers (Clients), one Xserve G5 (Metadata Controller), a fiber channel switch, and an Xserve RAID (with 5 drives on the first controller partitioned RAID 0 for a total of 1.8 TB of storage space, and 2 drives on the second controller partitioned RAID 1 for a total of 370 GB to be the controller data).
-For the sake of testing I disabled their internal network controller (connected to a DHCP server), and have them all talking to each other with a second ethernet card. They are all on the same subnet and they can all see each other. They each have a manually assigned IP and are not on an external network
-When I access Xsan admin from the Xserve (using Remote Desktop) I can connect to the Xsan Xserve.local (IP 10.10.1.10). There, under setup, I see the Xserve (which is bold) stating that it is the controller. I also see Client 1 (client). Both have a green light next to them and are reporting no problems with the serial number (note that I am accessing the Xserve using Remote desktop on CLIENT 2). Client 2 is not seen on the computers section of the setup.
-Now when I access Xsan Admin from the Client 2 machine, I get different results. First, when I try to add a SAN, Client's 2 local address is the default. I change it to Xserve.local with the proper name and password, and I get to monitor the Xsan just like I was doing before from the Xserve machine.
-Now if I leave the default address, another Xsan will appear on the left pane (SAN Components). Here is the were it confuses me. Under this new San, I see all 3 machines on the computers list, but the one in bold is the Client 2 machine (the one from which a I am accessing Xsan admin, also the one that was missing from the previous list). If I try to setup the SAN from there, naming the san or continuing the setup it will not allow me (note that all three machines have a green light next to them). It tells me that "Some configuration is invalid; The computer you are connect to must be a controller." The catch here is that it will only let me configure if I am connected to a controller but Client 2 will only appear if I am connect to it. Needless to say that I want client 2 to be a client, not a controller.
I know this may sound a little confusing, but I can feel I am very close in getting this to work. Any help would be much appreciated.
Best,
MarcelloFor anyone who has read this, thank you.
I finally managed to get all the clients to work together.
I was having a firewall issue, where my customized firewall settings were preventing communication on one of the critical ports that Xsan uses to talk to the components. All I had to do was flush the firewall and all was back to normal. -
OTP 2FA Problems with DA 2012 R2 and Windows 8.1 Client - Not prompting or OTP Code
Hi
Just seeing if anyone has come across the same issue with their WIn 8.1 clients not prompting for 2FA once configured with DirectAccess 2012 R2?
I have created the 2x OTP certificates, enabled OTP via PowerShell and set up the RADIUS server but whatever happens the Win 8.1 client does not get prompted for 2FA - They connect seamlessly?
I have also configured the DAProbeUser on the RADIUS server
Any help appreciated
ThanksI was afraid that you'll said that
I hate to be the annoying guy but take a look at this KB article:
http://support.microsoft.com/kb/2787534
Applied to: Windows 8\2012,
Doesn't Apply to: Windows 8.1\2012 R2
and - for a fact, doesn't include in Windows 8.1\2012 R2 as this bug still exists in those operating systems.
another annoying fact - No other update was released for these version yet.
this example approves that not every hotfix \ updates that was released for 8\2012 before 8.1\2012 R2, is already included in 8.1\2012 R2
and allow me to add another fact.
when you configure DirectAccess via the remote access wizard it creates a WMI query called
DirectAccess - Laptop Only WMI Filter.
after you create it in Windows Server 2012 R2 - look at the WMI Query and you'll see that by default it doesn't apply to version 6.3! the version for Windows 8.1.
if you want to add the support for Windows 8.1 you have to modify manually the query which is of course, not supported by Microsoft.
That is just another symptom that makes me wonder if Microsoft did ANY change or update to DirectAccess 2012 R2
Tamir Levy -
NCo 3 error: Non ABAP RFC Client not supported
Hi,
Iu2019m trying to create a server using .NET Connector 3.0(version 3.0.2, framework 2 and x64) for receiving Idocs from SAP ALE.
When i send IDOC type HRMD_A from SAP using ALE for RFC server I have this error on server: Non ABAP RFC Client not supported.
SAP.Middleware.Connector.RfcServerApplicationException: Uncaught exception SAP.Middleware.Connector.RfcUnsupportedPartnerException thrown in SAP.Middleware.Connector.RfcServer.ARfcDestShipImp
when executing RFC server function ARFC_DEST_SHIP --->
SAP.Middleware.Connector.RfcUnsupportedPartnerException: Non ABAP RFC Client not supported.
at SAP.Middleware.Connector.RfcConnection.ReadUpTo(RFCGET readState, RfcFunction function, RFCID toRid)
at SAP.Middleware.Connector.RfcConnection.Dispatch()
at SAP.Middleware.Connector.RfcTransaction.Playback()
at SAP.Middleware.Connector.RfcServer.ARfcDestShipImp(RfcServerContext ctx, IRfcFunction func)
at SAP.Middleware.Connector.RfcServer.InvokeServerFunction(RfcConnection conn, ServerFunctionInfo serverFuncInfo, RfcServerFunction functionImp)
--- End of inner exception stack trace ---
at SAP.Middleware.Connector.RfcServer.InvokeServerFunction(RfcConnection conn, ServerFunctionInfo serverFuncInfo, RfcServerFunction functionImp)
at SAP.Middleware.Connector.RfcServer.Dispatch(RfcConnection conn)
Do I need to do some "special configuration" because i´m sending from SAP ALE to my server??
Any help will be appreciated.
Thanks
Edited by: antonio.coelho on May 13, 2011 5:26 PMHi,
I changed the name of the server and I have the same error. I changed the server name on: RfcServerManager.GetServer("SERVER_NAME", handlers); do I need to change in some other place?
Did you made any more changes on SAP or c#?
Anyone have any suggestions on how to solve this problem? I'm trying everything and I still could not solve...
Any help will be appreciated.
Edited by: antonio.coelho on Jun 8, 2011 12:00 PM -
Oracle 10g client not connecting to Oracle 8i server
I have oracle 8i server already installed. I downloaded Oracle 10g client recently. I installed it on one machine and trying to connect to 8i server. I used TNSnames.ora which was already present on the machine. After entering the username, password and service name in SQL plus, I got a error saying server version not suported. Does 10g client not support 8i server or am I doing something wrong ?
There is an 8.1.7.4 patchset for Windows.
If you take a look at the Instant Client forum, there are some discussions on this where one of the Oracle product managers (Mr. Jue) has chimed in. At present, only connections to 8.1.7.4 and higher are supported. It is expected that the first 10g patchset will fix this bug and allow connections to 8.1.7.0 and above databases.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
SSO : krb_error 6 Client not found in Kerberos Database
Hi All,
We are trying to configure SSO for Win AD user to login to infoView
OS - Windows 2003 SP2
Machine - 64 Bit
BOE - XI 3.1 + SP2 + FP2.4 (32 Bit)
CMS Database - SQL 2005 Server
Domain Controller - Not sure if is 2003 or 2008 (awaiting information from client)
While executing the kinit
kinit BOSSO/<service accont name with FQDN> <password>
its throwing a "krb_error 6 Client not found in kerberos Database."
However Manual AD is working fine.
What could be the issue here.
Thanks and Regards
Ranjit Krishnan
Edited by: Ranjit Krishnan on Mar 24, 2010 2:56 PMclient not found in kerberos DB means the KDC was located but the username was not found. There are many reasons for this
1) typo in the username or when ktpass was run
2) duplicate UPN (caused by running ktpass on 2 or more accounts)
3) ktpass was not run on the account or not successfully so the username was never changed
4) there is a bug in AD with 2008 DC's when the UPN does not = the samaccountname which will throw this message (search SAP KB's for 2008 client not found in kerberos database and you'll find the link to the Microsoft article to patch it)
Regards,
Tim -
I Ask About WCS count Client not same WLC
WCS count Client not same WLC as on WLC count client = 100
on WCS count = 23-23
Wireless Control System Version 5.2.148.0
WLC 7.0.250.0
http://postimg.org/image/9boldeqd5/
http://postimg.org/image/l482i9poz/Your WCS should have a higher (or not equal) version to your WLC.
I wouldn't even consider troubleshooting WCS problems if your WCS is running 5.X because WCS/WLC firmwares 5.X are very, very buggy. -
DCNM LAN JAVA Client Not working
Hi ,
Recently i installed the DCNM server , we are using nexus 7k in dc environment . I purchased the DCNM server license and assigned it to switches thourgh web dcnm client . Login in Java DCNM LAN is not working , It says check your username/password . Only with SAN its working Fine , Authetication to the dcnm is configured to check the TACACS server . Can you help on this.
Thanks , Vedagiri GopinathDuplicate posts. :P
Go here: http://supportforums.cisco.com/discussion/12164196/dcnm-lan-java-client-not-working -
Kinit: Client not found in Kerberos database while getting initial credentials
Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank youHi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain. -
Client not found in Kerberos database
Hi All,
I am getting Client not found in Kerberos database* when i try to a create new connection from SQL Developer 2.1.1.64 to Oracle 10G database.
I am sure that login credentials provided in connection properties are correct. pls respond, if you know the solution.
Regards,
Manoj N.Your "being sure" is overwhelmed by the evidence. The chance that you are correct and database/Kerberos is incorrect is a very small number approaching zero.
So back to basics ...
1. What is your actual database version (it is not 10g)?
2. What version of Kerberos?
3. What platform and operating system?
4. Does it work for anyone else?
5. Did it ever work before and stopped working or is this a first attempt by anyone to log on?
6. Have you turned on connection logging? If not do so. If you have post the relevant section of the log file.
7. Do you have a DBA or system or network administrator on-site?
8. Please also post the full and complete error message not your interpretation of it.
We can not help you without a thorough understanding of what is actually happening which you have not provided. -
Client not modifiable message while executing t-code ops7 and ops6
Hi Guru's,
I am getting "Client not modifiable message while executing t-code ops7 and ops6" in Unit test and Quality client.
Pleae help me to resolve the error.
Regards
Sasikanth ReddyHi
Copy of the information I found regarding this issue:
It is possible to allow the maintenance of 'Customizing'-tables in a
production client, even if the client is set to 'not modifiable'.
Normally this should be the case for tables TCJ04 (responsible person)
and TCJ05 (applicant).
Please could you check the settings in your system and change it if
necessary:
Transaction SE11:
Table TCJ04: delivery class should be set to 'C'
TCJ05: delivery class should be set to 'C'
Transaction SOBJ -> Maintain
Position on V_TCJ04: Category should be 'CUST' field 'current settings'
should be marked.
Position on V_TCJ05: Category should be 'CUST' field 'current settings'
Please also check that your client is defined as 'PRODUCTIVE' via
transaction SCC4 (field client role).
I would also recommend that you review the attached notes with reference
to the usage of customizing setting "current settings": Nr. 77430,
Nr. 135028, Nr. 356483. These are also relevant for your release.
Kind regards,
Zhenbo -
Submit a SAP job and it is erroring out as "instance/client not found"
I am trying to submit a SAP job and it is erroring out as "instance/client not found"
as soon as I enter the instance/client value and click on next I am getting this error
please helpHi,
Then maybe there is a problem with another parameter, and the error is obscured by this error message.
You did specify valid values for all other parameters ?
Maybe you can try the following:
- create a simple job in SAP, you do not have to execute it only save it
- import this job using RSI_IMPORT_CCMS_JOBS and specify the exact job name
- run the imported job (it will have the same name as in SAP) and see if this works
- if this works, try your job again directly from CPS and compare your parameters with those on the imported job (especially which ones are filled or not filled, that sometimes is more important than the exact value chosen)
Regards,
Anton. -
Internet Client Not talking to DMZ MP
I am facing issues in communication of Internet Client to my MP sitting in DMZ.
Scenario:
Primary Site 2012
MP, DP role installed Site system in DMZ domain joined.
DMZ talking to DC, and site server, bidirectional.
Installed MP and DP role, with Internet only client, created FQDN, and published FQDN to public DNS
created certs following steps in http://www.systemcenterdudes.com/internet-based-client-management/.
Tried installing client manually in domain, using switches ccmsetup.exe /usePKICert /NoCRLCheck CCMHOSTNAME="MP public FQDN" DNSSUFFIX="public DNS" SMSSITECODE=XXX
When moved the client to open internet, I see below error in locations services.log
Attempting to retrieve site information from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:28:41 PM
2424 (0x0978)
Failed to send site information Location Request Message to XXXXXXX
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTP
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Failed to refresh security settings over MP with error 0x80004005.
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
No security settings update detected. LocationServices
3/18/2015 4:29:01 PM 2424 (0x0978)
Using INF MP XXXXXXXXXXX as lookup MP. LocationServices
3/18/2015 4:29:01 PM 2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Failed to send site information Location Request Message to XXX
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTP
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Failed to refresh Site Signing Certificate over MP with error 0x80004005.
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Refreshing Site Signing Certificate over HTTP
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] : dwStatusInformationLength is 4
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] : *lpvStatusInformation is 0x10
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] : WINHTTP_CALLBACK_STATUS_FLAG_CERT_CN_INVALID is set
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8BD27970-C69F-483D-A7E5-0DC76DC7A836";
DateTime = "20150318105926.499000+000";
HostName = "XXXXXXXX";
HRESULT = "0x80072f8f";
ProcessID = 5868;
StatusCode = 16;
ThreadID = 2424;
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
Failed to send request to /SMS_MP/.sms_aut?SITESIGNCERT at host XXX, error 0x2f8f
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] ERROR: URL=https://XXXXXXXX/SMS_MP/.sms_aut?SITESIGNCERT, Port=443, Options=480, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
Successfully sent location services HTTPS failure message.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Failed to refresh Site Signing Certificate over HTTP with error 0x80072f8f.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Using INF MP XXXXXXXX as lookup MP. LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Attempting to retrieve default management points from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSGetManagementPointsForSiteFromManagementPoint: Client is on Internet, skipping Intranet MP list request.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Unable to retrieve compatible MP(s) from AD
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSGetManagementPointsForSite: Domain joined client is in Internet - INF MP will be used to get other INF MPs.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSUpdateInternetManagementPoints LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Current AD site of machine is XXXXX LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Failed to send management point list Location Request Message to XXXXX
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
LSUpdateInternetManagementPoints: Failed to retrieve internet MPs from MP XXX with error 0x87d00231, retaining previous list.
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
There is no AMP for site code XXXX Nulling existing entry in WMI
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
Assigned MP changed from XXXXXXXX to <>.
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
Persisted Default Management Point Locations locally
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:37 PM
2432 (0x0980)
[CCMHTTP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
[CCMHTTP] : dwStatusInformationLength is 4
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] : *lpvStatusInformation is 0x10
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] : WINHTTP_CALLBACK_STATUS_FLAG_CERT_CN_INVALID is set
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8BD27970-C69F-483D-A7E5-0DC76DC7A836";
DateTime = "20150318105941.428000+000";
HostName = "XXXXXXXX";
HRESULT = "0x80072f8f";
ProcessID = 5868;
StatusCode = 16;
ThreadID = 2432;
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
Failed to send request to /SMS_MP/.sms_aut?MPLIST2&XXXXX at host XXXXXXX, error 0x2f8f
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
[CCMHTTP] ERROR: URL=https://XXXXXXXX/SMS_MP/.sms_aut?MPLIST2&XXXXX, Port=443, Options=480, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Successfully sent location services HTTPS failure message.
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Failed to send web service info Location Request Message
LocationServices 3/18/2015 4:29:41 PM
2424 (0x0978)
Modassir KhanHi,
Here is a blog has a similar problem that a Certificate Revocation List was not configured. You could have a look to check if you missed anything.
Certificate Revocation Lists and Your Config Manager Client
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
Bluetooth Portege 4010 - probs connecting to samsung and motorola phones
I have a portege 4010 with bluetooth. I am trying to connect to our two phones - a samsung sgh-e370 (newish) and a motorola V600 (2 yrs old). Both have BT. I have downloaded and installed the latest Tosh BT stack (4.0.something). Device Manager shows
-
Text in Hebrew has gone really weird in Motion and FCP - please help!
Hi, I have been working in a project for a long time, and produced hundreds of simple titles in Motion in Hebrew. The font I have used throughout is Arial Rounded MT Bold. In the latest title I added one text object and made it Italic. Since then, al
-
Can't find tnsnames.ora
Hi, I install Instant Client on Linux using rpm. I need to edit the tnsnames.ora, but I can't find it. Can I copy one instance of tnsnames.ora and set TNS_ADMIN=<the path of tnsname.ora directory> as and enviornment variable on your client machine? T
-
Dynamically changing classpath
How can i dynamically change classpath within a java program.
-
Want to partition hard drive of my hp dv6-3123tx
Hi there i want to partition hard drive of my pc hp dv6-3123tx steps please. This question was solved. View Solution.