10.6 Snow Leopard on white Macbook Intel Core 2 Duo
I am trying to install 10.6 Snow Leopard on an older Macbook 2.4ghz Intel Core 2 Duo with 4gb of RAM. I keep getting a message that this software cannot be installed on this comouter. But according to my research it should be able to be installed. What if anything can I do about this?
1. Technically, you need to buy a separate Snow Leopard DVD for each computer or get a family pack, but only need to buy Mountain Lion once.
2. The DVDs which shipped with a Mac can only be used on that specific Mac model.
(117454)
Similar Messages
-
I have a MacBook (Intel Core 2 Duo) whose screen will not light up!
I have a MacBook (Intel Core 2 Duo) running on Mac OS 10.5.8. Recently, my display screen will go "nearly" pitch black. "Nearly" because I can still see the outlines of the windows and apps in the background. For a while, I was just restarting my computer or opening and closing it until the screen came back on. Then, my friend told me to use the dimming function to fix it. So far, it has worked, but only if my computer is on brightness level 0-2. Obviously this has been terrible for my eyes and is not a permanent fix.
I've been trying to find out what piece of my Mac is going to need to be replaced. I think it's a video chip, but I'm not sure.... Has anyone else had this problem and can they tell me how much it cost them to fix it? Thanks! (I'm in Japan with a U.S. bought Mac, so my problem is a bit compounded, but here's hoping!)Ariel...
Try Resetting the System Management Controller (SMC)
If that doesn't help, it could be the graphics card.
Run the Apple Hardware Test -
Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63
ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html -
According to visit to genius bar, they told me its not support, I gotta buy a new Mac! I don't actually need it, but would like to have iCloud option, bc my iCal doesn't syn with any of my iPhone 4 or iPad 2.
The model 1,1 Core Duo can only run in 32 bit. Lion only runs in 64 bit which needs a Core 2 Duo model 2,1 or better which can run in 32 or 64 bit.
Here's the specs on your MacBook http://www.everymac.com/systems/apple/macbook/stats/macbook_2.0_white.html -
Can I have 3 GB of RAM in my Intel Core 2 Duo ..or does it have to be even?
I'm on a MacBook Intel Core 2 Duo 2 GHZ. I upgraded one Ram slot to 2GB and kept the other one at 1GB (as per Tekserve's NYC doing). Now I get a very active pinwheel and very very slow startups. I heard that you have to have even (1 and 1 or 2 and 2) SRAM. Could this be what's effecting my computers performance, or is having 3GB just fine. Thanks in advance.
No you would need to take them out to see who the manufacturer is, it's incredibly easy to do though. Just locate your manual and you will see, if you cannot find your manual it is online at Apple's site:
http://support.apple.com/manuals/#imac
The lengthy start up could be caused by several things one thing to try is a SMC and PRAM reset, the instructions for that are:
1. Turn off your iMac and unplug everything from it for 30 seconds.
2. Plug in the power cord, keyboard and mouse only.
3. Press the power button and immediately hold down the Option, Command, P & R keys until you hear the second gong then release the keys. Your machine will start up normally, then check for the issues you are having.
Regards,
Roger -
Can OS X Snow Leopard be installed on a MacBook Pro5, 5 with an Intel Core 2 Duo?
This question may already exist somewhere in the support community, but if it is there I have missed it. If not, then here it is for myself and those of this specific inquiry.
I have a MacBook Pro bought in mid-2009, Model MacBookPro5, 5, with an Intel Core 2 Duo, 4 GB RAM, and approximately 140 GB of HD space, which meets the stated requirements for Snow Leopard, Lion, Mountain Lion, and Mavericks. It is currently running OS X 10.5.8 Leopard, and I am trying to upgrade to Snow Leopard, or, if possible, Mavericks. I have the Snow Leopard CD, and have tried to install it. However, I get the error message "OS X Can't be installed on this computer". I have tried it from my current OS and by booting directly from the CD. I do not have any partitions, and have backed up and erased the existing Macintosh HD volume, but the error message continues.
Can anyone shed some light into what is the issue? If so, much appreciated in advance.Remousamavi,
yes, the MacBookPro5,5 (13-inch Mid 2009 MacBook Pro) can run Snow Leopard. In fact, there were two varieties of model-specific grey installation DVDs for that model MacBook Pro: one had Leopard 10.5.7, and the other had Snow Leopard 10.6. (The “Apple disc ID” of the latter is 2Z691-6533-A.)
Do you have the white “upgrade” 10.6 Snow Leopard DVD, or the white “install” 10.6.3 Snow Leopard DVD? If you have the “upgrade” DVD, then it won’t let you install onto an empty partition; you’ll need to have Snow Leopard installed on your boot disk before it will install the upgrade.
Once you’ve got Snow Leopard installed and updated via Software Update to 10.6.8, you’ll be able to install Mavericks. -
Hello:
I have tried installing Snow Leopard via the installation disc on a Macbook Pro (2007) with an Intel Core 2 Duo, but I the installation has failed more than 5 times.
I have first formatted and partitioned the internal hard disk with Mac Os Extended Journal format.
Once the installation starts, it starts without a problem unti lthe progress bar gest until half completed then a screen asking for a Computer Restart shows up.
It asks to press the power button for some time until it the computer shuts down and then, press again to turn it on.
Once turned on, the installation disc gets readed, the installation screen appears again and asks again to start the whole installation process form the beginning.Then you have a Hardware Problem.
Your system is Crashing part way through the install and Re-Booting because of the crash.
Could be the drive itself or it could be some other hardware part in your system. Like the RAM.
To check if it is the internal drive connect an External drive to the system by USB and do the install on that external. If the install completes then it more then likely the drive is bad. If it crashes again then it is more then likely some other piece of hardware in your system. -
Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook Pro running 10.6 (Snow Leopard)?
Hi Carolyn, thanks for your quick reply. First thing I did before posting my question was to check the system requirements for Creative Suite, both on Apple and Adobe's websites. But I am however confused about the difference between "Multicore Intel processor" vs "Core 2 Duo", and keep hearing stories about CS5 not working properly.
-
I have a MacBook Air (Intel Core 2 Duo) Mac OS X 10.6.8, I would like to update to Lion but I am not sure if I need the Snow Leopard, I am not sure if I have it, or if I can just download the Lion. Please help.
Select About This Mac from the Apple menu. The dialog will display the installed version.
-
I've got macbook pro w/OSXv10.6.8 and intel core 2 duo...how do i know if i have leopard or snow leopard? i'm interested in the new lion
tiger was 10.4
leopard was 10.5
snow leopard was 10.6
and LION 10.7!!! LOL
so you have 10.6 which is snow leopard
you should be ready to update assuming you meet the other requirements. -
HT3258 Can I upgrade my Macbook 4.1 2.4 Ghz intel core 2 duo 4GB to snow leopard?
I am very new to Mac and love it so far, however am wondering if I can uograde from 10.5.8 to snow leopard or lion? I have a Mackbook (4.1) 2.4Ghz Intel Core 2 Duo $GB 667 MHz DDR2 SDRAM.... Any assistance would be appreciated and pls remeber I am a newbie to Mac.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I need to update my Macbook as many applications do not run in my computer.
It's a Macbook 10..5.8 Intel Core 2 Duo, with graphics X3100.
I don't want to loose money, so I need to know if I have to buy first the Snow Leopard and then going for the Lion or others, or if I can buy directly Lion...
What would you recommend_
Thank you!Yes. Neil's is the right approach.
In my view, Snow leopard is an excellent OS for that model comnputer. You must remember that many programs that are part of Leopard and Snow Leopard would be lost if you went higher, and that is if you could go higher.
The DVD you will buy is 10.6.3 and will need updating to 10.6.8, plus the Combo updater to clear the needs for the best security. Snow leopard does not appear to be supported now. -
I have a Macbook 2006 with 10.6 snow leopard installed. I was wondering if i could get EA's origin download and sims 3 the game? The laptop has an Intel Core 2 Duo Processor.
Unfortunately no, I have e exact same problem. Our ancient laptops are to the full extent of upgrading available for its time..., I'm trying to find an older version of origin to download to my Mac at the moment... Take my email if you want and if I come across anything ill send you the link. The only other thing I can think of is to upgrade the entire Mac software to the newest version but that includes wiping out the entire system and hard drive and locating the software disc to do that and I'm not even sure if it will process all of that information since apple conciders our laptops "vintage" there's no way to go back because they don't support the software for these older ones anymore.
Sorry.
<Email Edited by Host> -
I have a 2007 MacBook 2GHz intel core 2 duo and i want to update to either snow leopard or lion what can ido if i have 10.4 already. please help
You can upgrade from 10.4 straight to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/
You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
You must have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
Installing Snow Leopard on a MacBook that is currently running Tiger
Is it possible to install Snow Leopard on my MacBook that is currently running Tiger? I have heard rumors that Leopard must be installed before Snow Leopard will work. I bought a white MacBook about three and a half years ago with Tiger installed.
1. The Snow Leopard installer itself runs the equivalent of Disk Utility's verify disk step on the volume selected for the install, so while this remains a good idea when upgrading to Leopard or other previous OS versions, doing it as a separate pre-install step is not necessary or likely to improve anything when upgrading to Snow Leopard.
In this respect the installer is quite finicky: if the volume doesn't pass verification, it will refuse to begin the install.
2. Aside from that, the installer is only finicky about two other things regarding format: (a) the drive must be formatted with the GPT (GUID Partition Table) partition scheme (the scheme the drives of all Intel Macs ship with) & (b) the table must conform to the standard GPT format. If the drive doesn't meet these criteria, the installer marks any volumes on it as not suitable for the install & users can't select them.
3. Some users seem unaware of just how different the Snow Leopard installer is from the earlier ones. When Apple talks about streamlining it in the product's blurb, it refers to much more than just eliminating the old Archive & Install and Erase & Install options, notably:
• Unlike the old Upgrade option, SL's version completely replaces the existing OS component files with the ones from the installer's 'payload.' (The old Upgrade option just replaced or patched components that had been changed for that OS version.) This is why the single provided option is equally suitable for a volume that contains an existing OS or an empty one. (It's also why upgrading from Leopard or Tiger works essentially the same way.)
• The new installer doesn't create a "Previous Systems" folder like the old Archive & Install did. There is no reason for this largely redundant folder anymore, since the new installer selectively leaves in place user-added items from the old system folders that they previously had to move back into those folders manually if they wanted to restore their functionality. However, if the "Previous Systems" folder exists because a user did an A&I with an older OS installer, the new one leaves it in place. But since the new OS ignores it, just as previous ones did, this has no effect on OS operation.
• If -- but only if -- users start the install process by launching the "Install Mac OS X" pre-install application while running from an installed OS, that app will use the installed OS's network settings to 'phone home' to Apple's database of software known to be incompatible with Snow Leopard & use that info to decide what if anything to move to a root level "Incompatible Software" folder during the install. The DVD has its own short list, but since that list was created before the DVD was made, it is now out-of-date & incomplete. Thus, it is always a good idea to start the install this way when possible, just as Apple recommends.
• Other minor refinements that only work if there is an existing OS include automatically deciding if Rosetta or Quicktime Player 7 should be installed, automatic language selection for the install process, & enabling the 'install drivers only for local & nearby printers' option. Each of these depends in some way on what's already installed.
4. All these refinements do not make the new installer 100% reliable but they eliminate the most common problems users had with the older ones, especially if they follow Apple's instructions & *do not* erase the drive beforehand. Just as the Installation Guide included on the disc (also available online here) says in the "Advice about installing" section, erasing the drive should be reserved for the rare times when the normal method fails.
Maybe you are looking for
-
From which table ,i ll get both the invoice and cleared amount ???
Hi Friends, i am making a report for my sales client where finance part is also required. the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal yea
-
Error while loading data from EXCEL to OWB
Hi Marcos, Thank you. I got way. I did in the following steps... 1. I created system dsn odbc_excel. 2. I created initSID.ora 3. I updated in the listener.ora. 4. I created a soure module in odbc in owb. 5. I created destination module in oracle wher
-
Condition value not updated when qty changed
hi all, I have created a new condition ZPR1 (copied from PR00) and use a new formula for it. There is a problem when I change the qty after the item is billed. Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the
-
Payment Block filed in document posting
Hi When i am posting special gl transaction in customer account using f-22 , Posting Block filed is not appearing . I have checked more data also.. it does not exitst. thanks and regards Ramarao.P
-
Is there a way to query organisational hierarchy via webservices / IMS API?
Hi, I'm trying to figure it out for a while but with no success... What I'd like to do is getting information on organisational hierarchy (a user's subordinates) via either the WS API or the IMS / SCORM one... Is there a way to do this? thanks peter