10.7.5 and mainstage 2.2.2 - Any issues before I upgrade?

Going from 10.7.3 to 10.7.4 was a nightmare, so I had to go back to 10.7.3.  I am wondering if I should upgrade to 10.7.5
Any Issues?

In my experience, mainstage 2.2.2 is as stable as 2.2.1 on both lion and mountain lion. The only caveat is that I have had significant problems since 2.2.1 with a specific AU (my main piano sound, worse luck) with is Truepianos. Something changed in mainstage and I get major CPU spiking causing audio dropout during performances. However I have a duel core mackbook pro and reports are that this is limited to these machines.

Similar Messages

  • I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

    I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
    Never had any issues before now... any ideas?

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

    I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • I need to create a rescue e mail so I can reset security questions and answers I never answered any questions before so any answer I put in r incorrect please help I tunes support has been useless

    I need to create a rescue e mail to change security questions and answers I never answered any questions when I first started using I tunes so there is no correct answer for the questions I also never set up a rescue e mail I tunes support after five requests has been useless

    Anything here to hlp? https://discussions.apple.com/message/19489801?ac_cid=tw123456#19489801

  • What can I do to recover data from my iPhone 4s? The phone fail to come on again after the installation of the new iOS8. The phone is locked and I didn't make any backup before the updating installation. Inside I have very important info.

    I Have problems with my iPhone 4s after the installation of the new iOS8, the phone doesn't want to switch on again. I need to recover some important data that I have inside the phone.

    Ralph Landry1 wrote:
    There isn't anything you can do to recover contents from iPhone 4s if you cannot get the iPhone to startup.  Connect it to a wall outlet so you have a solid power source, then do a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears.  If the iPhone still will not startup, the next options to try will automatically erase your iPhone all of its contents.
    The next step is to do a restore via the recovery mode as described in http://support.apple.com/kb/HT1808 but again note that this erases the iPhone.
    Thank you Landry, it is really a good experience to solve problem of iPhone Data Recovery!

  • My macbook calendar will not merge into my iPhone calendar. How do I push it to my iPhone and merge the calendar that I could before I upgraded iTunes?

    I upgraded my iphone to the newest version. It then would not work with older Macbookpro due to the incompatibility with the older software. My new 13" macbook can communicate with it, but my calendar on my macbook now doesn't transfer to my Iphone all the way. Basically an event I place on my macbbok calendar will not show up on my I phone, but my Iphone will show up on my macbbok. How do I get it back to the old way where both calendars merged and the newest prevailed? 

    Morning sevagm,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    Take a look at this section.
    Importing photos to your computer
    Best of luck,
    Mario

  • Boost M2 slot to 256G and install OS there. Any issues u530 Touch

    I want to install a 256 SSD in the M2 slot and move the OS and most of my programs there leaving the HD for large files (video and images)  I am making the following assumptions.  Please let me know if I left something out. 
    Pre install - Moved many fies to onedrive including outlook .pst files, favorites for IE and so on.  Only move files here i want reinstalled on the c: drive.  Once done, set onedrive to "make available online only."
    Backed up to a portable hard drive. 
    1.  Install and format the SSD as the new systems drive (c:\)
    2.  Change the BIOS to reflect this as the boot drive.  (BIOS is  upgraded to the latest version) 
    3.  Fresh install of windows on the new c drive.    
    4.  Do not install express cache. 
    5.  Update drivers - Are there any specific Lenovo drivers I will need to reinstall or can i just install the latest from Intel and others. 
    6.  Reinstall other software and move other files as necessary. 
    7.  Set one drive to make available offline and wait several hours for the files to be re-populated on the laptop. 
    So what did I miss? 
    Thanks in advance for your help. 
    Sherman

    hi duworm,
    Welcome to Lenovo Community,
       If you're using WIndows 8 or 8.1, You might have a problem using a retail or a non Lenovo OS Installer.
       It will not accept the Product key in the Mothebroard and will give you an activation error. But If you have your own Product key that came with the installer that you are going to use then it's not a problem.
       About One Drive, Im not sure if it will look for the Same path(location) where the documents are from, or it will  ask you where to put them.
    About the Lenovo Software, Aside from the Drivers for the hardware, One thing that may cause a Notification in your device Manager is the Software called Lenovo Energy Management, You'll need to install this if you want the device manager to be free of notification, all other Software can be left out.
    You might also want to check this if you have any problem booting into the M2 slot
    https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-seri​es/Lenovo-y510p-wont-reconize-NGFF-M-2-SSD-in-Disk​...
    Aside from those, all should push through with your Steps.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Firefox crashes repeteadly, over and over, new problem, never had issues before, no new software or plugins installed

    If someone can tell me how to show you my crash report, I can do that, and next time it crashes Ill try and copy and paste it or something. Anyway all my plugins and themes and extensions and what not have all been on here for a while, i've never had problems like this before, and they are all up to date, as is firefox. I'm using 3.6 on windows 7 Ultimate, 64 bit. Any additional details can be provided.

    Submitted Crash
    Reports Report ID Date Submitted
    <pre><nowiki>cac07fa3-6237-4a64-a590-b6037507b05b 1/20/2011 2:52 PM
    bef554e4-5121-4318-ba0b-cacbfdf4c6b2 1/19/2011 9:18 PM
    decb49be-6beb-4b45-8377-381a7975163c 1/19/2011 7:30 PM
    2fbe477b-7623-4a54-addb-6a5cefd7bf5e 1/19/2011 6:50 PM
    bp-7811426b-a90a-4d71-9587-dabfe2110118 1/18/2011 10:01 AM
    56406238-6d7b-4a11-81c8-701bde3fa38d 1/18/2011 9:26 AM
    97395dcf-5ef1-42f3-8fcd-bf5eba8f6b62 1/17/2011 8:04 PM
    0f049901-7c49-4600-8817-fafa750fed92 1/17/2011 7:20 PM
    4fbf213d-e34f-49e1-aeb2-c36ae7922dea 1/17/2011 1:41 PM
    6d25d3c3-dff0-4640-b2cc-e86af9a64b32 1/17/2011 11:24 AM
    ead69c21-a7b7-4a0c-b7a1-7a5e12f50bf8 1/17/2011 9:32 AM
    3ab52f95-7ef9-4a22-bcd6-fe0e9f9d0c58 1/16/2011 3:07 PM
    a2b2293b-35b7-4fee-bf22-f1a54d315418 1/16/2011 2:27 PM
    bp-8df25bfb-f2cc-4833-a153-b28502100519 5/19/2010 3:05 PM
    bp-5576ae94-01db-40c1-8241-4e9462100506 5/6/2010 5:42 PM</nowiki></pre>

  • My ipad 3 keeps dropping the wifi connection when my android tablet, android phone, and laptop have never had any issues.

    I just got a verizon ipad and am having wifi connection problems.  It will connect to my wifi but every 5 or 10 minutes it will drop the connection.  The only way to get it back is to go and manually connect to it again in the wifi settings.
    Is anyone else having this problem?  My android tablet and phone and laptop do not have this problem.

    It appears hundreds are having this problem.  You must not have done a search for this subject before posting.  Try a search for "wifi connection problem on iPad 3" and you'll get lots of information regarding this problem and a few suggestions you can try.

  • Parallels and Boot Camp on MacPro - New Issue after Security Upgrade

    Background: I have a MacPro set up with four internal harddrives. Drive 0 is the main Mac disk (1TB). Drive 1 is a Windows XP drive (250 MB), Drive 2 and Drive 3 are a RAID array. I went through the intial install of Boot Camp following the instructions for using multiple drives. To avoid having to reboot, I installed Parallels and linked the virtual machine to the XP drive. Everything worked fine until Monday.
    Monday I installed the  latest security update to the Mac OS (running Snow Leopard). After installation the WinXP disk didn't mount. I booted from the DVD and found a  problem on the Mac OS drive, which DiskUtility fixed. Now the WinXP drive does mount, and I can read the files when in the Mac OS, but Parallels cannot find the XP OS and BootCamp no longer offers the XP drive as a bootable disk. Can't run Windows, but it's there on the drive. Thoughts?

    I'm not certain that it was a partition issue since the entire drive is one Windows partition. However you tweaked my thought process and I booted from my Snow Leopard install disk and "repaired" the OSX drive. There were a couple of "funky" items found courtesy of the upgrade which disk utility cleaned up. Now here comes the really interesting part; Parallels will work and run XP for ONE user on the computer but not the other even though the virtual machine file is shared. Screwy, right? Naturally it is working for the user that uses XP the least...

  • IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

    Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
    I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
    After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
    I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
    I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
    It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
    If there is anything I left out, please let me know; and I thank you in advance!

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • Firefox 4.0 displays an error code when launching: "TypeError: Components.classes[cid] is undefined", add-ons doesn't work and I can't open any web pages

    Hello
    I've been running Firefox 3.6.16 with no problems at all, and this morning decided to upgrade to Firefox 4.0, as the developer of the them I use, Foxscape, has upgraded it to work with 4.0. The installation appeared to be as normal, but when I launched 4.0, the following error message appeared: error "when launching firefox 4.0 TypeError: Components.classes[cid] is undefined". The browser launched, but while I could go to webpages if they were in my bookmarks, so no problems with my internet connection, but when I typed in a URL (for example google.co.uk) and pressed "go", nothing happened. Similarly, when I tried to go to add-ons, it was as if I hadn't clicked anything. I wondered whether it was an issue with Foxscape (although I've never had any problems before when upgrading, as the standard theme just appears) so I reverted to 3.6.16, switched the theme to standard, then tried upgrading to 4.0 again. The same thing happened, so I'm positive it's got nothing to do with Foxscape.
    I run Windows Vista Home Edition on a Dell Inspiron. I also have IE 9 installed (I installed it a few weeks ago, and it's been running fine with 3.6.16). I've never had any problems with Firefox before; I'm very keen to upgrade to 4.0, and would appreciate your help in fixing this.
    Thanks

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I can't rent movies now, because I'm getting a message that I need to "go to the itunes store on my computer and verify my payment information. But it is all correct and I don't have any problems buying anything else but movies on Apple TV? What can I do?

    Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Since upgrading to Yosemite I lose my wifi connection. I have a MacBook Pro paired with verse. Our iPad and iPhones are fine. Any suggestions?

    Since upgrading to Yosemite I lose my wifi connection. I have a MacBook Pro paired with uverse. Our iPad and iPhones are fine. Any suggestions?

    Since upgrading to Yosemite I lose my wifi connection. I have a MacBook Pro paired with uverse. Our iPad and iPhones are fine. Any suggestions?

Maybe you are looking for