1003061 Unable to create thread [1] during parallel dataload

I am trying to load a planning app using EIS ... I am getting the cannot create error.
I have 30720 for data cache setting and 10240 for index cache setting..
any idea to resolve this issue??
Edited by: pat2 on Oct 2, 2008 7:24 PM
Edited by: pat2 on Oct 2, 2008 7:25 PM

Depends on the size of your databse (pag and ind files)
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_dbag/frameset.htm?daprcset.htm
have a look here for optimum cache settings, apply these to your db and try again (dont forget to stop and start the db first)

Similar Messages

  • Error Code -17400; Unable to create thread

    Running TestStand 4.0.  Test sequence calls many sequences that run as new executions and runs fine for up to about 8 units testing simultaneously.  After that, I get a run-time error code -17400; Unable to create thread.  There are no other details available.  The steps that generate the error are able to create the new executions initially, but eventually fail once about 22 executions are running.  I am monitoring memory resources and there does not appear to be any issues.  Any troubleshooting suggestions?  Thanks.

    My test sequence has several test groups, each of which contain loops that create new threads (tests) for 48 UUTs.  Thus the number of running threads does get very high.  I was running into problems with Windows XP GDI Object resources once the number of threads reached about 200.  I then modified my program into smaller test groups to keep the number of threads at any time to less than 150.  GDI resources are no longer an issue, but the error -17400 unable to create thread happens after the first test group has completed and the second test group is just trying to run.  Note that the second test group runs fine if I skip the first test group, so the sequence itself should be okay.  I thought it might be a memory issue (even though there are no apparent memory issues seen in Windows Task Manager), so I set the "Unload after step executes" property for each of the new executions created.  That did not resolve the issue. 
    I am trying to create a simple sequence to duplicate the error without using any of the actual test sequences that require test hardware, but have not been successful thus far.
    Thanks for your replies and suggestions!

  • Unable to create thread from startup class

    Hi,
    We are trying to create thread from our scheduler class. This scheduler class
    is called from a Startup class configured in WebLogic 7. But we failed to create
    thread. It does not showing any error also. Can anyone plz suggest what could
    be the problem.
    Thanks & Regards,
    Siddhartha

    Hi,
    We are trying to create thread from our scheduler class. This scheduler class
    is called from a Startup class configured in WebLogic 7. But we failed to create
    thread. It does not showing any error also. Can anyone plz suggest what could
    be the problem.
    Thanks & Regards,
    Siddhartha

  • Unable to create thread

    i wrote a code of a multiclient server ,but when i compile it i can't see any window opening nor ant thread class is being created.... please help
    SERVER:
    import java.io.*;
    import java.net.*;
    import java.util.*;
    import java.awt.*;
    import javax.swing.*;
    public class MultiThreadedServer3 extends JFrame implements Runnable {
        private JTextArea jta = new JTextArea();
        public  Vector v;
        String messageReceived;
        BufferedReader inputFromClient = null;
        PrintWriter outputToClient = null;
        String client_name = null;
        public int z;
        Thread t = null;
        Socket socket = null;
        /** Creates a new instance of MultiThreadSimpleServer */
        public void MultiThreadedServer3() {
            // place text area on the frame
            getContentPane().setLayout(new BorderLayout());
            getContentPane().add(new JScrollPane(jta), BorderLayout.CENTER);
            setTitle("Simple Server");
            setSize(500, 300);
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            setVisible(true);
            jta.setEditable(false);
            try {
                ServerSocket serverSocket = new ServerSocket(4242);
                System.out.println("Server is upp and running");
                jta.append("Server started at " + new Date() + "\n");
                while (true) {
                  socket = serverSocket.accept(); // accept connections
                InetAddress inetAddress = socket.getInetAddress(); // used to get host information
                /* Get host IP and hostname and display on the window */
                jta.append("Client connected to the server!\n" +
                         "\n" +
                        "Client's IP Address is: " + inetAddress.getHostAddress() + "\n");
                // Create a new thread for connection
                v = new Vector();
                t = new Thread(this); // create a new thread
                t.start();
            catch (IOException ex) {
                System.err.println(ex);
        } //close MiultiThreaddeServer3();
            synchronized public void send()
                    throws IOException
                outputToClient.println(messageReceived);
            synchronized public void send_personal()
                    throws IOException
            {   /* to get the position of the person's name
                 * with whom the client wants to cummunicate
                int m=messageReceived.indexOf((String)(v.elementAt(z)));
                // /* the message sent to the receiver will be the <sender's name> + message */
                outputToClient.println("<"+client_name+">"+messageReceived.substring(m));
            @Override
           synchronized public void run() {
                try {
                     inputFromClient = new BufferedReader(new InputStreamReader(socket.getInputStream()));
                     outputToClient = new PrintWriter(socket.getOutputStream(),true);
                     client_name = inputFromClient.readLine();
                     v.addElement(client_name);
                     outputToClient.println("Welcome, "+client_name+"the current users on the chat are :");
                     for(int j =0;j<v.size();j++)
                         if(v.isEmpty())
                             outputToClient.println("none,you are the initiator! Go on.... ");
                         else
                         outputToClient.println(v.elementAt(j));
                     outputToClient.println("To message to all write : 'MSG' followed by your message");
                     outputToClient.println("To private message: 'username' 'your mesage' ");
                    while (true) {
                        messageReceived = inputFromClient.readLine();
                        if(messageReceived.startsWith("MSG"))
                        for(int i=0;i<v.size();i++)
                              // v.elementAt(i).toString();
                            ((MultiThreadedServer3)(v.elementAt(i))).send();
                        for(z=0;z<v.size();z++)
                            if(messageReceived.startsWith((String)(v.elementAt(z))));
                            ((MultiThreadedServer3)(v.elementAt(z))).send_personal();
                           } // close while
                } //close try
                catch (IOException ex)
                    System.err.println(ex);
           } // close run
        public static void main(String[] args) {
            new MultiThreadedServer3();
    } // close MultiThreadServer

    my client code is as follows:
    CLIENT:
    import java.awt.event.*;
    import java.io.*;
    import java.net.*;
    import java.awt.*;
    import javax.swing.*;
    public class SimpleClient extends JFrame implements ActionListener {
        private JTextField jtfMessageToSend = new JTextField();
        private JTextArea jtaMessageReceived = new JTextArea();
        private JButton btnSend = new JButton("Send");
        private PrintWriter toServer;
        private BufferedReader fromServer;
        /** Creates a new instance of SimpleClient */
        public SimpleClient() {
            JPanel p = new JPanel();
            p.setLayout(new BorderLayout());
            p.add(new JLabel("Message to send: "), BorderLayout.WEST);
            btnSend.addActionListener(this);
            btnSend.setMnemonic('s');
            //btnSend.setActionCommand("active");
            p.add(btnSend, BorderLayout.EAST);
            p.add(jtfMessageToSend, BorderLayout.CENTER);
            jtfMessageToSend.setHorizontalAlignment(JTextField.LEFT);
            jtaMessageReceived.setEditable(false);
            getContentPane().setLayout(new BorderLayout());
            getContentPane().add(p, BorderLayout.SOUTH);
            getContentPane().add(new JScrollPane(jtaMessageReceived), BorderLayout.CENTER);
            jtfMessageToSend.addActionListener(this);
            setTitle("SimpleClient");
            setSize(500, 300);
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            setVisible(true);
            try {
                Socket socket = new Socket("localhost", 4242);
                fromServer = new BufferedReader(new InputStreamReader(socket.getInputStream()));
                toServer = new PrintWriter(socket.getOutputStream(),true);
            catch (IOException ex) {
                jtaMessageReceived.append(ex.toString());
        public void actionPerformed(ActionEvent e) {
            String actionCommand = e.getActionCommand();
            if (e.getSource() instanceof JTextField || e.getSource() == btnSend) {
                toServer.println(jtfMessageToSend.getText());
                    toServer.flush();
                    jtfMessageToSend.setText("");
                while(!(jtfMessageToSend.getText()).equals("bye"))
                try
                    String messageToDisplay = fromServer.readLine();
                    jtaMessageReceived.append(messageToDisplay + "\n");
                    toServer.println(jtfMessageToSend.getText());
                    //toServer.flush();
                    jtfMessageToSend.setText("");
                catch (IOException ex) {
                    System.out.println("Error in cummunication" +ex);
        public static void main(String[] args) {
            new SimpleClient();
    }

  • Unable to create attribute dimension in Essbase Studio

    Hi All,
    As per the process,I am create an Attribute for an dimension as below
    Hierarchy
    Family(gen1)
    SKU(gen2)
    Attribute1(gen1)
    SKU(gen2)
    Attribute2(gen2)
    SKU(gen3)
    Here the issue i am unable to create an 2nd attribute parallel to first on i mean attributes are not creating as sliblings.
    Please advise
    Thanks,
    SatyaB

    I think I understand what you are asking. I think your example is something like
    Products
    ---Colas
    -----Coke
    -----Diet coke
    Bottle (attribute)
    ---Coke
    Can (attribute)
    ---Diet coke
    This is not the way attributes work, you would have a column in your soruce perhaps called container_type that has the relationship
    Container_type
    Sku
    So the rows would look like
    Sku----Family-----container_type----other properties
    coke...Colas........Bottle............XXXXXX
    Diet Code..Colas...Can.............XXXXXXX
    This could be in your primary table or a joined table

  • Java.lang.OutOfMemoryError: unable to create new native thread

    Hi All,
    I have installed weblogic server 8 sp4 in production environment . I am facing problems with JVM issues .
    JVM is crashing very frequently with the following errro :
    ####<Jun 18, 2009 10:58:22 AM IST> <Info> <Common> <IMM90K-21> <SalesCom> <ExecuteThread: '24' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-000628> <Created "1" resources for pool "PIConnectionPool", out of which "1" are available and "0" are unavailable.>
    ####<Jun 18, 2009 11:00:09 AM IST> <Info> <EJB> <IMM90K-21> <SalesCom> <ExecuteThread: '23' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-010051> <EJB Exception occurred during invocation from home: payoutCheck.ejb.payoutCheck_s6v3so_HomeImpl@121a735 threw exception: java.lang.OutOfMemoryError: unable to create new native thread
    java.lang.OutOfMemoryError: unable to create new native thread
         at java.lang.Thread.start(Native Method)
         at payoutCheck.classes.MyThread2.MyThreadv(PayoutCheckBOImpl.java:249)
         at payoutCheck.classes.PayoutCheckBOImpl.genSP(PayoutCheckBOImpl.java:184)
         at payoutCheck.ejb.PayoutCheckSLSB.genSP(PayoutCheckSLSB.java:191)
         at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl.genSP(payoutCheck_s6v3so_EOImpl.java:315)
         at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl_CBV.genSP(Unknown Source)
         at payoutCheck.deligate.PayoutCheckBD.genSP(PayoutCheckBD.java:226)
         at ui.action.SearchAction.callFilter(SearchAction.java:378)
         at sun.reflect.GeneratedMethodAccessor201.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    >
    The above mentioned is coming several times , anybody please help out to get rid of this issue.
    Thanks in advance ,
    Krikar.

    This only tells you that the JVM is running out of heap space. It doesn't tell you what is causing the problem. You likely have a memory leak, but you could also try increasing the max heap size of the JVM (-Xmx command line option). It would help to watch the % mem in use statistic, but only immediately after a garbage collection cycle (you can force a GC from the admin console). If the % mem in use after the GC is increasing over time, then that likely confirms you have a memory leak. Note that looking at that statistic during the server startup probably is irrelevant. You'd need to wait until the server finishes starting up, and likely processed a few messages (to load static data).
    If you get to the point of confirming that you have a memory leak, that requires doing detailed analysis with a Java profiler (JProfiler, JProbe, YourKit, etc.) to track down the source of the leak.

  • WS 6.1SP5 gives error "unable to create native threads"

    Hi All,
    We are using AM7.0 on Sun Java Web Server 6.1 SP5. This is running on T2000 with 8 GB RAM on Solaris 10. We have implemented all the recommendations given by amtune script except Stack Size (-Xss128K). amtune recommends Stack Size of 128K. But our Web Server doesn't run with 128K. We had to bump it up to 192K.
    After some time in our load test, we get following error in our logs:
    ERROR: ConsoleServletBase.onUncaughtException
    com.iplanet.jato.NavigationException: Exception encountered during forward
    Root cause = [java.lang.OutOfMemoryError: unable to create new native thread]
    at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:380)
    at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
    at com.sun.identity.console.base.AMViewBeanBase.forwardTo(AMViewBeanBase.java:135)
    at com.sun.identity.console.base.AMAdminFrameViewBean.forwardTo(AMAdminFrameViewBe an.java:111)
    at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase. java:981)
    at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.j ava:615)
    at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFil terChain.java:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain .java:193)
    at com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFil terChain.java:213)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain .java:193)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java: 280)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java: 212)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
    at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java: 161)
    at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
    Root cause:
    java.lang.OutOfMemoryError: unable to create new native thread
    at java.lang.Thread.start0(Native Method)
    at java.lang.Thread.start(Thread.java:574)
    at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:212)
    at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1075)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:946)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:858)
    Does anybody knows what this error is and how to tackle this problem ?
    Thanks in advance,
    Vivek

    Hi Sultal,
    Thanks for the response. I will try reducing the ms and mx options. BTW, following are my WS' JVM settings:
    <JAVA javahome="/usr/jdk/entsys-j2se" serverclasspath="/opt/SUNWwbsvr/bin/https/jar/webserv-rt.jar:${java.home}/lib/t
    ools.jar:/opt/SUNWwbsvr/bin/https/jar/webserv-ext.jar:/opt/SUNWwbsvr/bin/https/jar/webserv-jstl.jar:/usr/share/lib/ktse
    arch.jar" classpathsuffix="/opt/SUNWam/lib/xalan.jar:/opt/SUNWam/lib/xmlsec.jar:/opt/SUNWam/lib/xercesImpl.jar:/opt/SUN
    Wam/lib/dom.jar:/opt/SUNWam/lib/saaj-api.jar:/opt/SUNWam/lib/jaxrpc-api.jar:/opt/SUNWam/lib/jaxrpc-impl.jar:/opt/SUNWam
    /lib/jaxrpc-spi.jar:/opt/SUNWam/lib/saaj-impl.jar:/etc/opt/SUNWam/config:/opt/SUNWam/lib:/opt/SUNWam/locale:/usr/share/
    lib/mps/secv1/jss4.jar:/opt/SUNWam/lib/am_sdk.jar:/opt/SUNWam/lib/ldapjdk.jar:/opt/SUNWam/lib/am_services.jar:/opt/SUNW
    am/lib/am_sso_provider.jar:/opt/SUNWam/lib/swec.jar:/opt/SUNWam/lib/acmecrypt.jar:/opt/SUNWam/lib/iaik_ssl.jar:/opt/SUN
    Wam/lib/iaik_jce_full.jar:/opt/SUNWam/lib/mail.jar:/opt/SUNWam/lib/activation.jar:/opt/SUNWam/lib/am_logging.jar:/opt/S
    UNWam/lib/jaas.jar:/opt/SUNWam/lib/jax-qname.jar:/opt/SUNWam/lib/jaxm-api.jar:/opt/SUNWam/lib/jaxm-runtime.jar:/opt/SUN
    Wam/lib/jce1_2_1.jar:/opt/SUNWam/lib/jdk_logging.jar:/opt/SUNWam/lib/namespace.jar:/opt/SUNWam/lib/relaxngDatatype.jar:
    /opt/SUNWam/lib/xsdlib.jar:/opt/SUNWam/lib/jaxb-api.jar:/opt/SUNWam/lib/jaxb-impl.jar:/opt/SUNWam/lib/jaxb-libs.jar:/op
    t/SUNWam/lib/jaxb-xjc.jar:/opt/SUNWma/lib/wireless_rendering.jar:/opt/SUNWma/lib/wireless_rendering_util.jar:/opt/SUNWm
    a/lib/mobile_services.jar:/opt/SUNWma/lib/ccpp-1_0.jar:/opt/SUNWma/lib/ccpp-ri-1_0.jar:/opt/SUNWma/lib/jena-1.4.0.jar:/
    opt/SUNWma/lib/rdffilter.jar:/opt/SUNWma/lib/locale:/opt/SUNWam/lib/mobile_identity.jar:" envclasspathignored="true" na
    tivelibrarypathprefix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicr
    eloadinterval="-1">
    <JVMOPTIONS>-Ds1is.java.util.logging.config.class=com.sun.identity.log.s1is.LogConfigReader</JVMOPTIONS>
    <JVMOPTIONS>-DLOG_COMPATMODE=Off</JVMOPTIONS>
    <JVMOPTIONS>-Djava.security.auth.login.config=/opt/SUNWwbsvr/https-ndmseauqa01.ndc.nasa.gov/config/login.conf</JVMO
    PTIONS>
    <JVMOPTIONS>-Djava.protocol.handler.pkgs=com.iplanet.services.comm</JVMOPTIONS>
    <JVMOPTIONS>-Dcom.iplanet.am.serverMode=true</JVMOPTIONS>
    <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
    <JVMOPTIONS>-Xmx3136M</JVMOPTIONS>
    <JVMOPTIONS>-Xms3136M</JVMOPTIONS>
    <JVMOPTIONS>-Xloggc:/opt/SUNWwbsvr/https-eauthws/logs/gc.log</JVMOPTIONS>
    <JVMOPTIONS>-server</JVMOPTIONS>
    <JVMOPTIONS>-Xss192K</JVMOPTIONS>
    <JVMOPTIONS>-XX:NewSize=392M</JVMOPTIONS>
    <JVMOPTIONS>-XX:MaxNewSize=392M</JVMOPTIONS>
    <JVMOPTIONS>-XX:PermSize=260M</JVMOPTIONS>
    <JVMOPTIONS>-XX:MaxPermSize=260M</JVMOPTIONS>
    <JVMOPTIONS>-XX:+DisableExplicitGC</JVMOPTIONS>
    <JVMOPTIONS>-XX:+UseParNewGC</JVMOPTIONS>
    <JVMOPTIONS>-XX:+CMSPermGenSweepingEnabled</JVMOPTIONS>
    <JVMOPTIONS>-XX:+CMSClassUnloadingEnabled</JVMOPTIONS>
    <JVMOPTIONS>-XX:+UseCMSCompactAtFullCollection</JVMOPTIONS>
    <JVMOPTIONS>-XX:CMSFullGCsBeforeCompaction=0</JVMOPTIONS>
    <JVMOPTIONS>-XX:SoftRefLRUPolicyMSPerMB=0</JVMOPTIONS>
    <JVMOPTIONS>-XX:+PrintClassHistogram</JVMOPTIONS>
    <JVMOPTIONS>-XX:+PrintGCDetails</JVMOPTIONS>
    <JVMOPTIONS>-XX:+PrintGCTimeStamps</JVMOPTIONS>
    <JVMOPTIONS>-XX:+UseConcMarkSweepGC</JVMOPTIONS>
    The error happens when the LWPs of the process goes beyond 500. In our load testing the server is getting hit 2000 requests per minute.
    I will reduce the mx and ms size, in the mean time, if you can take a look at any other thing that I need to do.
    One more thing, from where the native threads get allocated? (Heap/Perm/somewhere else)
    Regards,
    Vivek
    There is a certain limit for a number of threads that
    JVM can create. This limit depends on the OS and JVM
    options. You can try using XX:PermSize and
    -XX:MaxPermSize options as well as lowering -Xms and
    -Xmx options.

  • Assertion failed: Unable to load database SID during sybase system copy on Linux in the phase "Create DB"

    Hi Supports,
    I am using sapinst homogeneous system copy in Linux on sybase.
    I stuck on the the step 27/49 "create Database".
    I checked Firewall is off.
    i got  points in my sapinst_dev.log that "
    1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
    and
    2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
    Do i need to increase "sybase/SID/saplog_1" ?  because my "saplog_1" is 49 mb now.
    if it is ! how do i increase in this stage.
    can any one know about this error???
    Thanks,
    Aziz.

    Hi,
    When i seen SID.log file so its showing deadlock and checkpoint occurring,
    Is any solution ???
    Is this because of networks?
    we had 2 servers on this same IP. but i stopped one server and one is still running.
    please find my SID.log file and revert back if any soltion.
    ==========================================================
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
    ibssrv02:/sybase/IB1/ASE-15_0/install #
    ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
    IB1.log  IB1_BS.log  IB1_JSAGENT.log  RUN_IB1  RUN_IB1_BS  auditinit  setperm_all  showserver  startserver  sybhauser  veritas
    ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
    00:0000:00000:00000:2014/03/21 11:03:36.98 kernel  SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
    c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
    00:0000:00000:00000:2014/03/21 11:03:37.00 kernel  SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
    00:0000:00000:00000:2014/03/21 11:03:37.00 kernel  This product is licensed to: SAP, for use with SAP Business Applications.
    00:0000:00000:00000:2014/03/21 11:03:37.00 kernel  Checked out license ASE_CORE
    00:0000:00000:00000:2014/03/21 11:03:37.00 kernel  Adaptive Server Enterprise (Enterprise Edition)
    00:0000:00000:00000:2014/03/21 11:03:37.00 kernel  Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb).  This may take some time.
    00:0000:00000:00000:2014/03/21 11:03:38.32 kernel  Finished initialization.
    00:0000:00000:00000:2014/03/21 11:03:38.32 kernel  Using config area from primary master device.
    00:0000:00000:00000:2014/03/21 11:03:38.32 server  Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
    00:0000:00000:00000:2014/03/21 11:03:38.32 kernel  Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
    the default file.
    00:0000:00000:00000:2014/03/21 11:03:38.32 kernel  Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
    on file name in the RUNSERVER file to avoid this message.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
    after configuring enough Huge Pages.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Internal run-time model set for Linux  - Native
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Adaptive Server is using the threaded kernel mode.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Using 4096 file descriptors.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun  6
    16:08:18 2013
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Confidential property of Sybase, Inc.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Copyright 1987, 2013
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Sybase, Inc.  All rights reserved.
    00:0000:00000:00000:2014/03/21 11:03:38.33 kernel  Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1718]: executing SQL statement ("update master.dbo.sysusages set loc..
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1719]: executing SQL statement ("update sysattributes set object_inf..
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1720]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1730]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1731]: executing SQL statement ("begin declare @val int select @val=..
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'master': beginning upgrade step [ID  1740]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'model' does not exist. ASE will create it.
    --More--(11%)
    00:0006:00000:00001:2014/03/21 11:03:39.77 server  Database 'model': beginning upgrade step [ID     1]: Initialize disk and create empty allocation units on master devi
    ce.
    00:0006:00000:00001:2014/03/21 11:03:39.79 server  Database 'model': beginning upgrade step [ID     2]: Bootstrap basic system catalogs in database.
    00:0006:00000:00001:2014/03/21 11:03:39.79 server  Database 'model': beginning upgrade step [ID     6]: creating index (table syspartitions, index ncsyspartitions)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID     8]: creating index (table systypes, index ncsystypes)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID    10]: creating index (table sysobjects, index ncsysobjects)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID    13]: creating table (table systabstats)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID    26]: creating table (table sysprocedures)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID    27]: creating table (table syscomments)
    00:0006:00000:00001:2014/03/21 11:03:39.80 server  Database 'model': beginning upgrade step [ID    28]: creating table (table syssegments)
    00:0006:00000:00001:2014/03/21 11:03:39.81 server  Database 'model': beginning upgrade step [ID    29]: creating table (table sysprotects)
    00:0006:00000:00001:2014/03/21 11:03:39.81 server  Database 'model': beginning upgrade step [ID    30]: creating table (table sysusers)
    00:0006:00000:00001:2014/03/21 11:03:39.81 server  Database 'model': beginning upgrade step [ID    31]: creating table (table sysalternates)
    00:0006:00000:00001:2014/03/21 11:03:39.81 server  Database 'model': beginning upgrade step [ID    32]: creating table (table sysdepends)
    00:0006:00000:00001:2014/03/21 11:03:39.81 server  Database 'model': beginning upgrade step [ID    33]: creating table (table syskeys)
    00:0006:00000:00001:2014/03/21 11:03:39.82 server  Database 'model': beginning upgrade step [ID    47]: creating table (table syspartitionkeys)
    00:0006:00000:00001:2014/03/21 11:03:39.82 server  Database 'model': beginning upgrade step [ID    51]: creating table (table sysreferences)
    00:0006:00000:00001:2014/03/21 11:03:39.82 server  Database 'model': beginning upgrade step [ID    52]: creating table (table sysconstraints)
    00:0006:00000:00001:2014/03/21 11:03:39.83 server  Database 'model': beginning upgrade step [ID    53]: creating table (table sysusermessages)
    00:0006:00000:00001:2014/03/21 11:03:39.83 server  Database 'model': beginning upgrade step [ID    54]: creating table (table systhresholds)
    00:0006:00000:00001:2014/03/21 11:03:39.83 server  Database 'model': beginning upgrade step [ID    55]: creating table (table sysroles)
    00:0006:00000:00001:2014/03/21 11:03:39.83 server  Database 'model': beginning upgrade step [ID    56]: creating table (table sysslices)
    00:0006:00000:00001:2014/03/21 11:03:39.83 server  Database 'model': beginning upgrade step [ID    60]: creating table (table sysstatistics)
    00:0006:00000:00001:2014/03/21 11:03:39.84 server  Database 'model': beginning upgrade step [ID    61]: creating table (table sysxtypes)
    00:0006:00000:00001:2014/03/21 11:03:39.84 server  Database 'model': beginning upgrade step [ID    62]: creating table (table sysjars)
    00:0006:00000:00001:2014/03/21 11:03:39.84 server  Database 'model': beginning upgrade step [ID    65]: creating table (table sysqueryplans)
    00:0006:00000:00001:2014/03/21 11:03:39.85 server  Database 'model': beginning upgrade step [ID    68]: creating table (table sysencryptkeys)
    00:0006:00000:00001:2014/03/21 11:03:39.85 server  Database 'model': beginning upgrade step [ID    73]: executing SQL statement ("update sysobjects set sysstat = sys...
    00:0006:00000:00001:2014/03/21 11:03:39.85 server  Database 'model': beginning upgrade step [ID    74]: executing SQL statement ("update syscolumns set type=66, user...
    00:0006:00000:00001:2014/03/21 11:03:39.85 server  Database 'model': beginning upgrade step [ID    80]: creating table (table sysattributes)
    00:0006:00000:00001:2014/03/21 11:03:39.86 server  Database 'model': beginning upgrade step [ID    82]: creating table (table sysdams)
    00:0006:00000:00001:2014/03/21 11:03:39.86 server  Database 'model': beginning upgrade step [ID    90]: insert basic data into bootstrap system tables
    00:0006:00000:00001:2014/03/21 11:03:39.89 server  Database 'model': beginning upgrade step [ID    91]: executing SQL statement ("update systypes set length=@@maxpag...
    00:0006:00000:00001:2014/03/21 11:03:39.89 server  Database 'model': beginning upgrade step [ID   245]: Update system roles in system tables.
    00:0006:00000:00001:2014/03/21 11:03:39.89 server  Database 'model': beginning upgrade step [ID   248]: update system catalog protection data
    00:0006:00000:00001:2014/03/21 11:03:39.90 server  Database 'model': beginning upgrade step [ID   606]: executing SQL statement ("select lct_admin('lastchance', db_i...
    00:0006:00000:00001:2014/03/21 11:03:39.90 server  Database 'model': beginning upgrade step [ID  1126]: Initialize systabstats with valid statistics
    00:0006:00000:00001:2014/03/21 11:03:39.90 server  Database 'model': beginning upgrade step [ID  1131]: Creating/Updating the last chance threshold for logsegment.
    00:0006:00000:00001:2014/03/21 11:03:39.90 server  Database 'model': beginning upgrade step [ID  1274]: executing SQL statement ("declare @dummy int")
    --More--(13%)
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1241]: executing SQL statement ("insert into sysattributes (class, a...
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1400]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1411]: executing SQL statement ("if not exists (select 1 from master...
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1416]: executing SQL statement ("update sysroles set id=11 from sysu...
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1502]: executing SQL statement ("if exists (select 1 from sysobjects...
    00:0006:00000:00001:2014/03/21 11:03:39.91 server  Database 'model': beginning upgrade step [ID  1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
    00:0006:00000:00001:2014/03/21 11:03:39.92 server  Database 'model': beginning upgrade step [ID  1505]: executing SQL statement ("update sysattributes set char_value...
    00:0006:00000:00001:2014/03/21 11:03:39.92 server  Database 'model': beginning upgrade step [ID  1550]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.92 server  Database 'model': beginning upgrade step [ID  1554]: upgrade simulated statistics
    00:0006:00000:00001:2014/03/21 11:03:39.92 server  Database 'model': beginning upgrade step [ID  1564]: executing SQL statement ("declare @dbid int select @dbid = db...
    00:0006:00000:00001:2014/03/21 11:03:39.93 server  Database 'model': beginning upgrade step [ID  1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1651]: updating builtin permissions
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1652]: adding generic user 'usedb_user' to sysusers
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1653]: updating DBCC command permissions
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1702]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1719]: executing SQL statement ("update sysattributes set object_inf...
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1720]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1730]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Database 'model': beginning upgrade step [ID  1740]: noting the present database upgrade level
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
    00:0006:00000:00001:2014/03/21 11:03:39.97 server  Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
    be guaranteed.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Database 'sybsystemdb' is now online.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Database sybsystemdb successfully created.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Recovering database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Started ANALYSIS pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Redo pass of recovery has processed 2 committed and 0 aborted transactions.
    --More--(15%)
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Completed REDO pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Started recovery checkpoint for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Completed recovery checkpoint for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Started filling free space info for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:39.99 server  Completed filling free space info for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Boot Count: 1
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking external objects.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Database 'sybsystemdb' is now online.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Now loading ASE's new default sort order and character set
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
    tes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
    bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    --More--(17%)
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
    tes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
    tes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
    bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    --More--(18%)
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
    tes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
    --More--(20%)
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
    tes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
    bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
    tes.
    --More--(21%)
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
    s 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
    4 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
    384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
    is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  
    00:0006:00000:00001:2014/03/21 11:03:40.00 server  Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
    384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
    able is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
    s 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    --More--(23%)
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
    s 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
    16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
    is table is 16384 bytes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  Default Sort Order successfully changed.
    00:0006:00000:00001:2014/03/21 11:03:40.01 server  ASE shutdown after verifying System Indexes.
    00:0006:00000:00001:2014/03/21 11:03:40.01 kernel  ueshutdown: exiting
    00:0000:00000:00000:2014/03/21 11:03:40.01 kernel  Main thread performing final shutdown.
    00:0000:00000:00000:2014/03/21 11:03:40.06 kernel  Blocking call queue shutdown.
    00:0000:00000:00000:2014/03/21 11:03:40.21 kernel  SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
    00:0000:00000:00000:2014/03/21 11:03:40.98 kernel  SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
    c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  This product is licensed to: SAP, for use with SAP Business Applications.
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  Checked out license ASE_CORE
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  Adaptive Server Enterprise (Enterprise Edition)
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  Using config area from primary master device.
    00:0000:00000:00000:2014/03/21 11:03:41.00 kernel  Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
    after configuring enough Huge Pages.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Internal run-time model set for Linux  - Native
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Adaptive Server is using the threaded kernel mode.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Using 4096 file descriptors.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun  6
    16:08:18 2013
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Confidential property of Sybase, Inc.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Copyright 1987, 2013
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Sybase, Inc.  All rights reserved.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Unpublished rights reserved under U.S. copyright laws.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel 
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  This software contains confidential and trade secret information of Sybase,
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Inc.   Use,  duplication or disclosure of the software and documentation by
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  the  U.S.  Government  is  subject  to  restrictions set forth in a license
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  agreement  between  the  Government  and  Sybase,  Inc.  or  other  written
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  agreement  specifying  the  Government's rights to use the software and any
    --More--(24%)
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  applicable FAR provisions, for example, FAR 52.227-19.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
    d73692b).
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Disk Controller Manager is online.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Network Controller Manager is online.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Ct-Lib Controller Manager is online.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Platform TCP network support seems IPv4-only.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  ASE booted with TCP_NODELAY enabled.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Network and device connection limit is 4081.
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  ASE - Dynamic Pluggable Component Interface is disabled
    00:0000:00000:00000:2014/03/21 11:03:41.01 kernel  Adaptive Server is running as process id 25438.
    00:0000:00000:00000:2014/03/21 11:03:41.05 server  Number of blocks left for proc headers: 6920.
    00:0000:00000:00000:2014/03/21 11:03:41.05 server  Proc header memory allocated 1384 pages for each per engine cache.
    00:0000:00000:00000:2014/03/21 11:03:41.05 server  Proc header memory allocated 1384 pages for engine 0 local cache
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Using value of 'number of engines at startup' (1) for size of syb_default_pool.
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Aggressive task stealing enabled
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Enabling Linux Native Kernel asynchronous disk I/O strategy.
    00:0007:00000:00000:2014/03/21 11:03:41.05 kernel  I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
    00:0008:00000:00000:2014/03/21 11:03:41.05 kernel  I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Virtual device 0 started using asynchronous i/o.
    00:0000:00000:00000:2014/03/21 11:03:41.05 server  Loaded default Unilib conversion handle.
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Worker Thread Manager is not enabled for use in ASE.
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
    hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
    00:0000:00000:00000:2014/03/21 11:03:41.05 kernel  libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
    /Thu Jun  6 12:02:54 2013
    00:0000:00000:00000:2014/03/21 11:03:41.08 kernel  Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
    00:0000:00000:00000:2014/03/21 11:03:41.08 kernel  Begin processing to generate RSA keypair.
    00:0000:00000:00000:2014/03/21 11:03:41.11 kernel  Completed processing to generate RSA keypair.
    00:0000:00000:00000:2014/03/21 11:03:41.11 kernel  Begin processing to generate RSA keypair.
    00:0000:00000:00000:2014/03/21 11:03:41.28 kernel  Completed processing to generate RSA keypair.
    00:0000:00000:00000:2014/03/21 11:03:41.28 kernel  Encryption provider initialization succeeded on engine 0.
    00:0000:00000:00000:2014/03/21 11:03:41.28 kernel  SSL Plus v5.2.2 security modules loaded successfully.
    --More--(26%)
    00:0006:00000:00000:2014/03/21 11:03:41.28 kernel  Network and device connection limit is 4081.
    00:0006:00000:00000:2014/03/21 11:03:41.28 kernel  ASE - Dynamic Pluggable Component Interface is disabled
    00:0006:00000:00000:2014/03/21 11:03:41.28 kernel  Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
    00:0006:00000:00000:2014/03/21 11:03:41.28 server  Active traceflags: 1623
    00:0006:00000:00001:2014/03/21 11:03:41.28 kernel  libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
    _64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
    00:0006:00000:00001:2014/03/21 11:03:41.28 server  Size of the 16K memory pool: 8192 Kb
    00:0006:00000:00001:2014/03/21 11:03:41.28 server  Opening Master Database ...
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Loading ASE's default sort order and character set
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Recovering database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Started estimating recovery log boundaries for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Completed estimating recovery log boundaries for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Started ANALYSIS pass for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Completed ANALYSIS pass for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
    00:0006:00000:00001:2014/03/21 11:03:41.29 server  Started REDO pass for database 'master'. The total number of log records to process is 42.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Redo pass of recovery has processed 7 committed and 0 aborted transactions.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Completed REDO pass for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Timestamp for database 'master' is (0x0000, 0x00006ec9).
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Recovery of database 'master' will undo incomplete nested top actions.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Started recovery checkpoint for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Completed recovery checkpoint for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Started filling free space info for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Completed filling free space info for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Started cleaning up the default data cache for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Completed cleaning up the default data cache for database 'master'.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Checking external objects.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  Database 'master' is now online.
    00:0006:00000:00001:2014/03/21 11:03:41.30 server  The transaction log in the database 'master' will use I/O size of 16 Kb.
    00:0006:00000:00001:2014/03/21 11:03:41.37 server  server is unnamed
    00:0006:00000:00001:2014/03/21 11:03:42.06 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.001'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Recovering database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started ANALYSIS pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed REDO pass for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
    --More--(28%)
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started recovery checkpoint for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed recovery checkpoint for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started filling free space info for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed filling free space info for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Boot Count: 2
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Checking external objects.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Resident Node id: fb18efb51d00
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Transaction coordinator initialized.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Database 'sybsystemdb' is now online.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Recovering database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started estimating recovery log boundaries for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed estimating recovery log boundaries for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started ANALYSIS pass for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed ANALYSIS pass for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started REDO pass for database 'model'. The total number of log records to process is 19.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Redo pass of recovery has processed 4 committed and 0 aborted transactions.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed REDO pass for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Timestamp for database 'model' is (0x0000, 0x000013cb).
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Recovery of database 'model' will undo incomplete nested top actions.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started recovery checkpoint for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed recovery checkpoint for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started filling free space info for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed filling free space info for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Started cleaning up the default data cache for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Completed cleaning up the default data cache for database 'model'.
    00:0006:00000:00001:2014/03/21 11:03:42.07 server  Checking external objects.
    00:0006:00000:00001:2014/03/21 11:03:42.08 server  The transaction log in the database 'model' will use I/O size of 16 Kb.
    00:0006:00000:00001:2014/03/21 11:03:42.08 server  Database 'model' is now online.
    00:0006:00000:00001:2014/03/21 11:03:42.08 server  The logical pagesize of the server is 16 Kb.
    00:0006:00000:00001:2014/03/21 11:03:42.08 server  0 dump conditions detected at boot time
    00:0006:00000:00001:2014/03/21 11:03:42.08 server  Clearing temporary database 'tempdb'.
    00:0006:00000:00001:2014/03/21 11:03:42.09 server  Tempdb 2 is added to the  list of local temporary databases
    00:0006:00000:00001:2014/03/21 11:03:42.09 server  Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  Database 'tempdb' is now online.
    00:0006:00000:00009:2014/03/21 11:03:42.10 kernel  network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  Recovery complete.
    --More--(30%)
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  ASE's default unicode sort order is 'binary'.
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  ASE's default sort order is:
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  'bin_iso_1' (ID = 50)
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  on top of default character set:
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  'iso_1' (ID = 1).
    00:0006:00000:00001:2014/03/21 11:03:42.10 server  Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
    00:0006:00000:00001:2014/03/21 11:03:42.10 kernel  Warning: Cannot set console to nonblocking mode, switching to blocking mode.
    00:0006:00000:00001:2014/03/21 11:03:42.10 kernel  Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
    00:0006:00000:00015:2014/03/21 11:03:54.09 kernel  Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
    00:0006:00000:00015:2014/03/21 11:03:54.09 kernel  Virtual device 1 started using asynchronous i/o.
    00:0006:00000:00015:2014/03/21 11:03:55.01 server  Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
    00:0006:00000:00015:2014/03/21 11:03:55.13 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.002'.
    00:0006:00000:00015:2014/03/21 11:03:55.13 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00015:2014/03/21 11:03:55.14 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.003'.
    00:0006:00000:00015:2014/03/21 11:03:55.15 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00015:2014/03/21 11:03:55.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.004'.
    00:0006:00000:00015:2014/03/21 11:03:55.16 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00015:2014/03/21 11:04:22.28 server  Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
    radation.
    00:0006:00000:00015:2014/03/21 11:04:24.34 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.005'.
    00:0006:00000:00015:2014/03/21 11:04:24.34 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00015:2014/03/21 11:04:24.88 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.006'.
    00:0006:00000:00015:2014/03/21 11:04:24.88 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00015:2014/03/21 11:04:24.89 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.007'.
    00:0006:00000:00015:2014/03/21 11:04:24.90 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00015:2014/03/21 11:04:24.90 kernel  Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
    00:0006:00000:00015:2014/03/21 11:04:24.90 kernel  Virtual device 2 started using asynchronous i/o.
    00:0006:00000:00015:2014/03/21 11:04:24.95 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.008'.
    00:0006:00000:00015:2014/03/21 11:04:24.95 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00015:2014/03/21 11:04:25.05 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.009'.
    00:0006:00000:00015:2014/03/21 11:04:25.05 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00017:2014/03/21 11:04:27.11 kernel  Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
    00:0006:00000:00017:2014/03/21 11:04:27.11 kernel  Virtual device 3 started using asynchronous i/o.
    00:0006:00000:00018:2014/03/21 11:04:27.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.010'.
    --More--(32%)
    00:0006:00000:00018:2014/03/21 11:04:27.16 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00018:2014/03/21 11:04:27.19 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.011'.
    00:0006:00000:00018:2014/03/21 11:04:27.19 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00019:2014/03/21 11:04:28.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.012'.
    00:0006:00000:00019:2014/03/21 11:04:28.16 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00019:2014/03/21 11:04:28.18 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.013'.
    00:0006:00000:00019:2014/03/21 11:04:28.18 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00020:2014/03/21 11:04:29.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.014'.
    00:0006:00000:00020:2014/03/21 11:04:29.17 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00020:2014/03/21 11:04:29.18 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.015'.
    00:0006:00000:00020:2014/03/21 11:04:29.19 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00021:2014/03/21 11:04:30.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.016'.
    00:0006:00000:00021:2014/03/21 11:04:30.16 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00021:2014/03/21 11:04:30.18 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.017'.
    00:0006:00000:00021:2014/03/21 11:04:30.18 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00017:2014/03/21 11:04:31.15 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.018'.
    00:0006:00000:00017:2014/03/21 11:04:31.15 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
    00:0006:00000:00017:2014/03/21 11:04:31.16 server  Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
    ase/IB1/ASE-15_0/IB1.019'.
    00:0006:00000:00017:2014/03/21 11:04:31.16 server  The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
    00:0006:00000:00025:2014/03/21 11:04:35.24 server  Shutdown started by user 'sa'. SQL text: shutdown
    00:0006:00000:00025:2014/03/21 11:04:35.25 server  ASE shutdown by request.
    00:0006:00000:00025:2014/03/21 11:04:35.25 kernel  ueshutdown: exiting
    00:0000:00000:00000:2014/03/21 11:04:35.25 kernel  Main thread performing final shutdown.
    00:0000:00000:00000:2014/03/21 11:04:35.30 kernel  Blocking call queue shutdown.
    00:0000:00000:00000:2014/03/21 11:04:35.45 kernel  SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
    00:0000:00000:00000:2014/03/21 11:04:36.50 kernel  SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE

  • Java.lang.OutOfMemoryError: unable to create new native thread on Win2000

    Dear all,
    I install a java server (SAP J2EE) on the windows machine and run into the following problem: the total number of threads cannot exceed 1200 (as i see this in the task manager)
    After it does reach this number no other tasks can be started. Thereafter i get java.lang.OutOfMemoryError: unable to create new native thread error .
    However the other machine where the same distribution of Win2000 Server is installed can easily coupe with more than 2500 theads. The same is true when the safe mode on the first machine is on: I can generate more than 1200 threads. So it seems the problem has something to do with Windows itself.
    I am really puzzled here, would really appreciate any help.
    Thanks in advance,
    Dimitry
    Surkov Dimitry
    [email protected]
    +49.1632.492618

    well, i do not supply any options when i start jvm, but it is not the course:
    it also happens with c programs. however in the safe mode it works. both for c and for java program.
    so it must be either some software (however memory is ok) or ...? i am lost. In some Unix system you can set the total number of threads allowed as an option in the kernal. But i guess this is not the case with windows.
    Thanks a lot for your reply,
    dimitry

  • Help! Unable to create new native thread

    Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused.  Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread".  Then a few minutes later the same tag on the same page works just fine.
    I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
    Here are my arguments from the jvm.config file.
    # Arguments to VM
    java.args=-server  -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
    Here is a typical error that comes through.
    struct     
    Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4    
    DateTime    {ts '2010-06-23 10:07:44'}  
    Diagnostics unable to create new native thread null <br>The error occurred on line 122.
    GeneratedContent      
    HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main    
    Mailto      interweb@--------------------- 
    Message     unable to create new native thread      
    QueryString fuseaction=ManagedLists.MailSubscriptions     
    RemoteAddress     192.168.250.124
    RootCause   struct    
    Message     unable to create new native thread      
    StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)  
    I could really use some help figuring this out.  We are getting random errors a few times a day and usually in places where we are using CFLDAP.
    Thanks,
    David

    Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
    There's no definite answer from Adobe, because there's no definitive single question.  These errors come up because - for any number of possible reasons - the JVM becomes overloaded.  And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se.  So what's Adobe supposed to do?  Come and fix your application for you?  There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out.  Or you could hire someone like Mike Brunt to come and have a look at your set up.  All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
    I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually.  What causes this sort of thing?  More traffic than the server can process.  This could be because of server kit, or it could be due to code that doesn't scale to the requirement.  Usually the latter.  Basically one cannot polish a turd.
    I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
    I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS.  Everything has been running fine for the past few months, but now it's starting to crash more and more frequently.  I have CF 8.0.1.195765 and Java 1.6.0_04
    How many concurrent requests for 180000 clients generate?  The number of clients matters less than how heavily the site is used.  But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side.  Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
    If I was in your situation, I'd consider the following options:
    * upgrade your JVM to the most recent version (1.6.0_21?)
    * put more RAM in the box, and run a second CF instance on it.
    * get another box.
    * refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
    * run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
    * get an expert in to do the analysis side of things.
    * stop expecting Adode to fix "something".
    One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down.  Opening Windows Explorer and searching for files can take minutes.  Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown.  Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
    You don't, by any chance, store your client variables in the registry do you?  The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry.  Never store client variables in the registry.
    Adam

  • Unable to create native thread in Normal Condition

    I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
    import java.io.BufferedReader;
    import java.io.IOException;
    import java.io.InputStreamReader;
    * ThreadJvmMemory.java
    * Created on June 1, 2007, 9:49 AM
    * To change this template, choose Tools | Template Manager
    * and open the template in the editor.
    * @author Administrator
    public class ThreadJvmMemory extends Thread{
    /** Creates a new instance of ThreadJvmMemory */
    BufferedReader in = null;
    public ThreadJvmMemory() {
    public static void main(String args[]){
    ThreadJvmMemory dummy = new ThreadJvmMemory();
    dummy.waitTillEnter();
    for(int i=0;i<5000;i++){
    if(i%1000==0){
    System.out.println(i);
    dummy.waitTillEnter();
    ThreadJvmMemory dummy1 = new ThreadJvmMemory();
    dummy1.start();
    public void run(){
    //System.out.println("Here");
    Object dummyObject = new Object();
    try {
    in = new BufferedReader(new InputStreamReader(System.in));
    in.readLine();
    } catch (IOException ex) {
    ex.printStackTrace();
    System.out.println("Came out of the thread");
    public void waitTillEnter(){
    try {
    if(in==null)
    in = new BufferedReader(new InputStreamReader(System.in));
    in.readLine();
    } catch (IOException ex) {
    ex.printStackTrace();
    I started the program using the following command line option..
    "c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
    where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
    What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
    1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
    2. Is there any way to configure process space. IMO No ?? Confirm ??
    3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
    Java version is 1.5.0
    OS Windows 2k3
    Snippet of GC Output
    [GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
    [GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
    [GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
    [GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
    [GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
    [GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
    [GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs]

    I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
    import java.io.BufferedReader;
    import java.io.IOException;
    import java.io.InputStreamReader;
    * ThreadJvmMemory.java
    * Created on June 1, 2007, 9:49 AM
    * To change this template, choose Tools | Template Manager
    * and open the template in the editor.
    * @author Administrator
    public class ThreadJvmMemory extends Thread{
    /** Creates a new instance of ThreadJvmMemory */
    BufferedReader in = null;
    public ThreadJvmMemory() {
    public static void main(String args[]){
    ThreadJvmMemory dummy = new ThreadJvmMemory();
    dummy.waitTillEnter();
    for(int i=0;i<5000;i++){
    if(i%1000==0){
    System.out.println(i);
    dummy.waitTillEnter();
    ThreadJvmMemory dummy1 = new ThreadJvmMemory();
    dummy1.start();
    public void run(){
    //System.out.println("Here");
    Object dummyObject = new Object();
    try {
    in = new BufferedReader(new InputStreamReader(System.in));
    in.readLine();
    } catch (IOException ex) {
    ex.printStackTrace();
    System.out.println("Came out of the thread");
    public void waitTillEnter(){
    try {
    if(in==null)
    in = new BufferedReader(new InputStreamReader(System.in));
    in.readLine();
    } catch (IOException ex) {
    ex.printStackTrace();
    I started the program using the following command line option..
    "c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
    where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
    What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
    1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
    2. Is there any way to configure process space. IMO No ?? Confirm ??
    3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
    Java version is 1.5.0
    OS Windows 2k3
    Snippet of GC Output
    [GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
    [GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
    [GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
    [GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
    [GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
    [GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
    [GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs]

  • HT1998 Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I tried downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    You should not install it again..
    Boot the computer into safe mode and try the uninstall again.
    No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
    Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows.

  • OutOfMemoryError: unable to create native thread

    Why do I get OutOfMemory exceptions even if there is plently of Memory.
    JVM settings are -Xms256M and -Xmx1024M.
    Debug at runtime (Runtime.totalMemory()) shows that it never got above 260M. Why does the JVM not grab some more memory -instead of throwing OutOfMemory exception.
    I am creating quite a lot of threads 800+ within a few minutes
    Any ideas?

    I googled a bit and one thing i came across was
    "In those hypothetical configurations, the error java.lang.OutOfMemoryError: unable to create new native thread would begin to saturate the JRun logs. To clarify the error text, the error message means that no more native, or OS, threads can be created for the JVM process, causing the JVM to throw an exception. The exception type is java.lang.outOfMemoryError, but I find that to be rather misleading since the resource limitation on the OS thread count, not memory usage. "
    So it looks like you're looking for OS specific settings rather than anything pure java.
    Note that a thread per socket is not necessary, even when not using NIO:
    import java.io.BufferedReader;
    import java.io.IOException;
    import java.io.InputStreamReader;
    import java.io.Reader;
    import java.net.ServerSocket;
    import java.net.Socket;
    import java.util.HashMap;
    import java.util.LinkedList;
    import java.util.List;
    import java.util.Map;
    import java.util.concurrent.Executors;
    import java.util.concurrent.TimeUnit;
    public class ForumQuestion { 
        // i'm assuming character based input
        static final List<Reader> readers = new LinkedList<Reader>();
        static final Map<Reader,StringBuffer> buffers = new HashMap<Reader,StringBuffer>();
        static final Map<Reader,Socket> sockets = new HashMap<Reader,Socket>();
        public static void main( String[] args ) throws IOException {
            // using single thread (for simplicity) to handle all sockets
            // the main trick is making sure that your thread(s) doing the reading
            // don't sit and "spin" around the inputStreams when they have nothing
            // at all waiting... wasting CPU. Here i just make the worker sleep
            // for 1000 nanos between attempts where it hasn't read anything. I'm
            // sure you can do better!
            Executors.newScheduledThreadPool( 1 ).scheduleWithFixedDelay( new Runnable() {
                public void run() {
                    checkStreams();
            }, 1000, 1000, TimeUnit.NANOSECONDS );
            // create server socket and use main thread to block waiting for connections
            ServerSocket serverSock = new ServerSocket( 1138 );
            System.out.println( "Accepting connections on port 1138" );
            while( true ) {
                Socket s = serverSock.accept();
                synchronized( readers ) {
                    Reader r = new BufferedReader( new InputStreamReader( s.getInputStream() ) );
                    readers.add( r );
                    buffers.put( r, new StringBuffer() );
                    sockets.put( r, s );
                    System.out.printf( "Connection: %s%n", s );
        private static void checkStreams() {
            // i've been lazy (over zealous) with the synchronization for simplicity. you'd want to
            // Do something cleverer than blocking accepts() while work is being done
            synchronized( readers ) {
                if ( readers.size() == 0 ) {
                    return;
                // carry on until no work was done for any incoming sockets
                while( true ) {
                    boolean workDone = false;
                    for( Reader r : readers ) {
                        try {
                            StringBuffer buff = buffers.get( r );
                            while( r.ready() ) {
                                char c = (char)r.read();
                                buff.append( c );
                                checkBuffer( r, buff, c );
                                workDone = true;
                        } catch( IOException e ) {
                            // do something here, client prob dead
                    // if no work done (no sockets had anything) then rest the thread
                    if ( !workDone ) break;
        private static void checkBuffer( Reader r, StringBuffer buff, char last ) {
            if ( last == '\n' ) {
                System.out.printf( "Read \"%s\" from %s%n", buff.toString().trim(), sockets.get( r ) );
                buff.delete( 0, buff.length() );
    Accepting connections on port 1138
    Connection: Socket[addr=/127.0.0.1,port=1776,localport=1138]
    Connection: Socket[addr=/127.0.0.1,port=1777,localport=1138]
    Read "hello" from Socket[addr=/127.0.0.1,port=1776,localport=1138]
    Read "hi" from Socket[addr=/127.0.0.1,port=1777,localport=1138]
    Read "we're two sockets, but only using one thread to read from both of us!!" from Socket[addr=/127.0.0.1,port=1776,localport=1138]
    Read "Oh! YAY!!!!" from Socket[addr=/127.0.0.1,port=1777,localport=1138]It's massively inferior to using NIO, but better than having thousands of dedicated threads

  • Error 1013000 loading application: Unable to Create Request Server Thread

    We are currently getting the following error "Error 1013000 loading application: Unable to Create Request Server Thread" when attempting to load more than 5 applications onto our new Essbase server. The O/S is Windows 2003 and we are running Essbase 6.5.5. Our old server, running Windows 2000, is not experiencing this problem.

    I think I've found the problem! It seems the server team didn't set up the swap file, hence, when physical memory started to run a little low on the box, the thread could not be created. FYI, we had already increased the SERVERTHREADS option in the Essbase.cfg file.

  • Error during BCC base data import:  Unable to create class DeploymentServer

    Unable to create class atg.deployment.server.DeploymentServer for configuration /atg/epub/DeploymentServer java.lang.NoClassDefFoundError
    Hello~~~. Can anyone point me into the right direction
    I had checked my class path it got atg.deployment.server.DeploymentServer.
    and the 'legacy' /atg/epub/DeploymentServe looks like (which is doing nothing...really)
    #/atg/epub/DeploymentServer/
    #/atg/epub/DeploymentServer property allowMissingNonEssentialAgents is set to true. By default, this property is set to false. If set to false, unessential agents are treated like essential agents and must be online and functional during deployment.
    #All agents that are flagged as essential are online and functional.
    #allowMissingNonEssentialAgents     false
    ----------stack trace error ---------------
    [exec] **** info     Wed Mar 07 10:20:01 EST 2012     1331076001656     /DPSLicense     atg.service.ServiceResources->dynamoPrintMaxSessions : Only 20 concurrent sessions can be managed with this license
    [exec] **** info     Wed Mar 07 10:20:01 EST 2012     1331076001656     /DPSLicense     atg.service.ServiceResources->dynamoPrintMaxDynamoServers : Only 3 Dynamo server(s) can be used concurrently with this license
    [exec] **** info     Wed Mar 07 10:20:01 EST 2012     1331076001656     /DPSLicense     DPS is licensed to Hutchison 3G Australia Pty Limited - Development
    [exec] **** info     Wed Mar 07 10:20:01 EST 2012     1331076001656     /DPSLicense     atg.service.ServiceResources->unlimitedLicenseMsg : This product is licensed for an unlimited number of CPUs.
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003062     /atg/epub/version/VersionManagerRepository     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003203     /atg/dynamo/server/SQLRepositoryEventServer     Service /atg/dynamo/server/SQLRepositoryEventServer listening at http://cgi-hxc15q12:3040/
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003265     /atg/epub/process/ProcessData-ver     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003281     /atg/epub/process/ProcessDataRepository     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003390     /atg/epub/file/PublishingFiles-ver     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003421     /atg/epub/file/PublishingFileRepository     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003781     /atg/userprofiling/InternalProfileRepository     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003890     /atg/dynamo/security/AdminSqlRepository     SQL Repository startup complete
    [exec] **** info     Wed Mar 07 10:20:03 EST 2012     1331076003890     /atg/dynamo/security/AdminAccountInitializer     Initializing account database /atg/dynamo/security/AdminAccountManager from /atg/dynamo/security/SimpleXmlUserAuthority
    [exec] Nucleus running
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004453     /     Unable to create class atg.deployment.server.DeploymentServer for configuration /atg/epub/DeploymentServer java.lang.NoClassDefFoundError: javax/ejb/FinderException
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /     Unable to resolve component /atg/epub/Configuration      java.lang.NoClassDefFoundError: javax/ejb/FinderException
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at java.lang.Class.forName0(Native Method)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at java.lang.Class.forName(Class.java:242)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.PropertyEditors.getPropertyEditor(PropertyEditors.java:254)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.getProperty(BeanConfigurator.java:731)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.configureStateProperty(BeanConfigurator.java:683)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.configureStateProperty(BeanConfigurator.java:594)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.configureState(BeanConfigurator.java:418)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.PropertyConfiguration.configureState(PropertyConfiguration.java:809)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:748)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:62)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1319)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1119)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:787)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:569)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:550)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:394)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:1051)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:81)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.ConfigurationRefProperty.getValue(ConfigurationRefProperty.java:82)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:357)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:218)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:241)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:275)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:752)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:62)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1319)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1119)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:787)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:569)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:550)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:394)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:1051)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.ConfigurationRefArray.getValue(ConfigurationRefArray.java:146)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:357)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:218)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:241)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:275)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:752)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:62)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1319)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1119)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:787)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:569)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:550)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:394)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.Nucleus.resolveName(Nucleus.java:2648)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.GenericService.resolveName(GenericService.java:315)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.nucleus.GenericService.resolveName(GenericService.java:367)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5498)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /          at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5072)
    [exec] **** Error     Wed Mar 07 10:20:04 EST 2012     1331076004484     /

    The class that is missing is javax/ejb/FinderException
    Download one of the jars from below site and add it to classpath. Then build the ear again and restart the server.
    http://www.jarfinder.com/index.php/java/info/javax.ejb.FinderException
    Peace
    Shaik

Maybe you are looking for

  • Form opening for some users but not others

    I created a form with an area for the recipient to simply type their name, save the document and email it back.  This works for some but I have a user getting an error message: "This document does not allow changes to be saved.  Any changes you have

  • FileNotFoundException while deploying ear-file

    Hello I just tried to deploy my ear-file with the DeployTool DeployTool->Load Ear->Connect to Server->Deploy The deploying process always stops at 50-60% with the following Error: Message ERROR: NOT deployed. The Deploy Service returned the following

  • XML Report Issue while generating the Report in EXCEL

    Hi All, I have Created the XML Report which will generate the output in EXCEL format. I am having the issue with the report output in EXCEL. In my Case, If I ran the concurrent it got completed normally and the output got completed normally and the o

  • Why is Lion and VMWare 3 so slow?

    Hi, I run VMWare Fusion 3 (Windows 7) on my MacBook Pro (2.4 GHz Core 2 Duo CPU, 4GB RAM) with Snow Leopard and it runs fine (speed acceptable with a lag now-and-then). I loaded VMWare Fusion 3 (Windows 7) on my faster iMac (3.1 GHz Core i5, 4 GB RAM

  • AR clearing across customer accounts

    Hi All, My company, Spire healthcare, has a situation where a patient is treated, invoices are raised against an Insurance company, and part of the payment comes from the insurance company but part of the payment comes from the patient. We have a lar