1013 ADF project migration does not work

I have previously developed a simple ADF application using Jdeveloper 1012 that contains the following components.
1. a data page called start that contains a simple form where a user can input a name and a number
2. this page then forwards onto a dataAction called doSomething that bings these values to a refresh method on a collection that I have written
3. the refresh method then builds up the collection of test values, i.e. 1_David, 2_David, 3_David etc up to the number that the user entered on the form.
4. I have used the invokeCustomMethod within the dataAction to manually force the itterator to refresh on the colleciton when the doSomething dataAction is called.
5. this then forwards onto a dataPage called results that displays the contents of the populated collection as a read only table.
please note that this colleciton is populated on-the-fly using a custom refreshMethod that I have written for the collection and does not retrieve data from a database.
THIS WORKS FINE IN JDEVELOPER 1012.
I have then tried to open this project in Jdeveloper1013. This wizard asks me if I would like to convert the project to the new format - to which I agree, but then when I try and run the program the application fails.
I'd appreciate any help/suggestions that you may have as to why this happens.

Hi Shay,
I'm not getting any specific error messages when I do the conversion, the applicaiton just does not work anymore.
As I have previously said the application I am trying to migrate from 1012 uses a collection that a dataAction populates when it is called using a refreshMethod that I have written.
When I run the "converted" application in 1013 I don't get any errors at all but the applicaiton does not populate my collection any more. I think this may be down to the fact that I am manually resetting the itterator on the collection to -1 (therefore forcing it to be rebuilt when the dataAction is called). I have done this by using the invokeCustomMethod which is no longer supported in 1013.
I am currently discussing this fact here:
1013 - Force Collection To Refresh Different To 1012
I'd appreciate any other ideas/suggestions that you may have as to why the migration process is not working correctly for ADF applications that have been developed in this manner, especially as I would like to convert a VERY large application that was developed in this way using JDeveloper 1012 into 1013 so that I can utilise the new enterprise manager within the OC4J 1013 server.

Similar Messages

Ok, the project panel does not work anymore!!!!

I'm using flash cs5.5 and today I opened my project to start working... just to find out that the project panel does not work. When I click the tab to expand it, flash hangs for a minute and then it works, but the panel is blank, empty. The odd thing, I saved the project as CS5 version to open it in the CS5 Flash, but CS5 it's broken too.
I tried opening Flash (both versions) without loading any project and the tab does not work either.
Anyone has an idea on this?
Thanks!

Ok, I think I get what the problem is... When I make right click over the PROJECT panel, it displays the flash player popup menu, so I guess it's made with flash/air. What I think is that my flash player is somehow screwed, so it don't displays the project panel contents and won't let me export my FLA files correctly. And it happens in both CS5 and CS5.5 versions.
Maybe a clean reinstall of both should solve the issue... I reinstalled the CS5.5 two times, and didn't solve the problem, neither uninstalling/installing the flash player plugin for all browsers.
kglad:
I only see the tab, when I try to display the panel contents, FLASH hangs like for a minute, then it responds but the panel is blank... no menus, options, nothing.

LOV /ADF UIX pages does not work on the older version od UIX page

Hi
I have recently migrated UIX project from the Jdeveoper 9i to Jdev10g version 1.0.1.2, everything work without any issue, however when I try to create a LOV or any component that are ADF-UIX based, but it does not work I don't even get any error, it just does not work based on the ADF-UIX (Expression base component),
Any help to resolve this issue will be greatly appericated
Thanks

I too have problems with LOVs in UIX pages. I have
some that you have to run twice to get back a value.To solve this problem,
1) open your UIX page where you create a new row
2) in the Structure window, click third tab "UI Model"
3) double-click the control action binding corresponding to Create
4) select CreateInsert from the list
The problem is related to the fix we introduced for the "Blank Row Issue" (see http://www.oracle.com/technology/products/jdev/tips/muench/blankrow/index.html).
If you have access to MetaLink, please refer to Note 299860.1 and Bug 4201020.
Regards,
Didier.

Project link does not work in Office 365

We recently signed up for Office 365 and Project Online. That adds a link "Projects" in the top nav, but when I click on it, I get error "Sorry, this site isn't available right now. Give us few minutes and try again. If it still does
not work, contact your administrator." Any ideas?
Darwaish

Hi Darwaish,
How long ago did you sign up? We have seen some issues where it has take a while or needed re-provisioning. I'd suggest you follow the support options from the page
https://portal.microsoftonline.com/Support/SupportOverview.aspx# - the right hand section and the "Contact Support..." option. We can look into this and get you sorted.
Best regards,
Brian Smith
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Server 2012 cluster - virtual machine live migration does not work

Hi,
We have a hyper-v cluster with two nodes running Windows Server 2012. All the configurations are identical.
When I try to make a Live migration from one node to the other I get an error message saying:
Live migration of 'Virtual Machine XXXXXX' failed.
I get no other error messages, not even in event viewer. This same happens with all of our virtual machines.
A normal Quick migration works just fine for all of the virtual machines, so network configuration should not be an issue.
The above error message does not provide much information.

Hi,
Please check whether your configuration meet live migration requirement:
Two (or more) servers running Hyper-V that:
Support hardware virtualization.
Yes they support virtualization.
Are using processors from the same manufacturer (for example, all AMD or all Intel).
Both Servers are identical and brand new Fujitsu-Siemens RX300S7 with the same kind of processor (Xeon E5-2620).
Belong to either the same Active Directory domain, or to domains that trust each other.
Both nodes are in the same domain.
Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).
All of the vitual machines have virtual hard disks.
Use of a private network is recommended for live migration network traffic.
Have tried this, but does not help.
Requirements for live migration in a cluster:
Windows Failover Clustering is enabled and configured.
Yes
Cluster Shared Volume (CSV) storage in the cluster is enabled.
Yes
Requirements for live migration using shared storage:
All files that comprise a virtual machine (for example, virtual hard disks, snapshots, and configuration) are stored on an SMB share. They are all on the same CSV
Permissions on the SMB share have been configured to grant access to the computer accounts of all servers running Hyper-V.
Requirements for live migration with no shared infrastructure:
No extra requirements exist.
Also please refer to this article to check whether you have finished all preparation works for live migration:
Virtual Machine Live Migration Overview
http://technet.microsoft.com/en-us/library/hh831435.aspx
Hyper-V: Using Live Migration with Cluster Shared Volumes in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/dd446679(v=WS.10).aspx
Configure and Use Live Migration on Non-clustered Virtual Machines
http://technet.microsoft.com/en-us/library/jj134199.aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support
I have also read all of the technet articles but can't find anything that could help.

Updating sandbox solutions in project online does not work?

Hello
We have created a sandbox solution (version 1 - test.wsp-) with Visual Studio 2012. This sandbox solution only writes the URL in a log: "V1_http://contoso.com". Everything works fine when we launch a workflow. I mean, we create a project through
"new project" button. This project has a Enterprise Project Type associated to the previous workflow.
Now we update the sandbox solution (version 2 -test.wsp-) with Visual Studio 2012 adding a new functionality (deactivate old solution/upload new sandbox solution/actívate the new sandbox solution). We have modified the sandbox solution in order to write "V2_http://contoso.com".
Our test is as follows: We use the same Enterprise Project Type and we create a new project with the same workflow. When the project is created, the log still writes the URL defined in the sandbox solution (version 1 -test.wsp- "V1_http://contoso.com")
instead of the one we have defined in the sandbox solution (version 2 -test.wsp- "V2_http://contoso.com).
It seems that when we update a sandbox solution, changes are not taking place in Project Online.
Changes take place only when we create a new sandbox solution, with a different name.
Does anybody have the same issue?

We solved it!
Close the case
Nicolas project

New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it. I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything.
When you say you can't reach OWA is that internally or externally? As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
with Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
Server. )
Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
https://mail.theirdomainhere.tld
Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server.

Add Link option in ADF RichTextEditor component does not work

Hi all,
If I try to add a link in an ADF RichTextEditor component, it tries to open the link the domain of my application rather than trying to use the whole URL.
For example, you can go to the RichTextEditor at [http://jdevadf.oracle.com/adf-richclient-demo/faces/components/richTextEditor.jspx] .
Then, highlight some text, for example "world" and then click Add Link button and add "www.oracle.com". The link appears in the RichTextEditor. However, if you try to open the link, the link tries to open inside the domain of the application - in the above case, the URL is http://jdevadf.oracle.com/adf-richclient-demo/afr/www.oracle.com
Any suggestions on how to fix this. Please help as this is a stopper for the release.
Thank you and regards.

Okay, I figured out the answer. You need to set the complete URL with the protocol.

ADF Tabe's Pagination link does not work when embedded in iframe

Hi experts,
When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
<iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
Any idea on it?
Thank you in advance.
Regards,
Tony

Hi,
if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
Frank

URGENT HELP BPC Park N Go does not work when VBA Project is protected

Hi
I am using NW BPC 7.5 client sp07 and the park n go feature show a dialog box with the message to disable VBA Protection but I need the protection, is there a work around.
Urgent help project is meant to be signed off today.
Thanks

Hi
Yes we are using native excel protection but having it protected in excel or not has no effect on the vba project being locked and the trust access with vba option is enabled, the MS version worked with vba password but only after we unlocked it and took the files offline n then online again to get the temp files added to the vba project n then protected it again. This workaround does not work in NW.
Thanks for your replies.

Search in ADF does not work

Hello.
I have created a search form with two iterators one for the results and the other for the search criteria. The search form works as expected. The name of the view that i am using is "MasterPartyView1". When i execute the following code
ViewObject voMasterParty = appMod.findViewObject("MasterPartyView1");
voMasterParty.setWhereClause("Id = " + MasterPartyId);
voMasterParty.executeQuery();
Row rowDest = voMasterParty.first();
in a backing bean and i go to the search form the only result that i a have is the row that i found in this statement (voMasterParty.setWhereClause("Id = " + MasterPartyId);).
Why is that?The adf search does not go every time in the database to fetch rows?
the only workaround for the moment is that i put these two extra lines in the backing bean
voMasterParty.setWhereClause(null);
voMasterParty.executeQuery();
which is not correct because i am fetching all the rows from the database i think.
Thank you in advance
Periklis

Frank thanks a lot for your answer but i still have some questions.
1 question: One workaround that i found is to the search with the view named MasterPartyView1 and have another instance of the view object(MasterPartyView2) in order to perform the custom search(setwhereclause).This seems to work. Is this approach correct?
2 question: if i understood correctly you say that both iterators point to the result set of the query (one row) and such is not possible to find other rows. But in the search form there is an invoke action
<invokeAction id="AlwaysInFindMode" Binds="Find"
RefreshCondition="${bindings.MasterPartyView1SearchIterator.findMode == false}"/>
that to my understanding puts the iterator in Find mode, thus making the input text fields available for criteria again. So the search iterator now points to QBE and it is possible to iterate over a collection of QBE criteria rows. is this correct?And if it is why it does not work as expected?Why it does not bring other results?Why the iterators (the seach iterator and the results iterator) still point to the newly created result set?
Thanks in advance
Periklis

Application Parameter does not work on migrating

We have encountered this various times.
When we add an application parameter to an existing application, it does not work on migrating.
We have to make a new service (application) and then attach the parameter to it, then it works.
What is the reason for this behavior?
Eg: I added the parameter WDDISABLEUSERPERSONALIZATION and set it to X in development. Works fine there. On migrating to UAT, it does not work. What's amiss?
Thanks in adv.

Hi Aishi,
maybe SAP Note [1332644|https://service.sap.com/sap/support/notes/1332644] "WDA Application Parameters are not changed in all clients" might be helpful in your case.
Best regards,
Andreas

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

Migrating V9 to V10: Update XML Fragment CLOB does not work anymore

I have an XML Schema that contains an element, named Operazione, mapped to a CLOB.
I just migrate to Oracle 10.1.0.2.0 from version 9.2.0.2.0 and the code I developed does not work anymore.
To get a CLOB on v 9.2.0.2.0 I issued the following statement:
select extractValue(value(p),'/operazione.log/Operazione') from XMT_OPERAZIONE_LOG p
where existsNode(value(p),'/operazione.log/Journal[NumeroElettronico=1234567890]') = 1
To make it working on V10 I have to change it as follow:
select extract(value(p),'/operazione.log/Operazione').getClobVal() from XMT_OPERAZIONE_LOG p
where existsNode(value(p),'/operazione.log/Journal[NumeroElettronico=1234567890]') = 1
So using extract intead of extractValue and adding getClobVal() I was able to read the CLOB.
The problem that I was not able to solve is related to CLOB update. In V9 just adding the âfor updateâ clause I was able to change the CLOB value on DB.
In V10 if I run the V9 statement I get the error:
ORA-03113: end-of-file on communication channel
If I use the statement modified for V10, adding the âfor updateâ clause, I get the CLOB and I can change the CLOB value but nothing goes on the DB. Probably I am working on a copy of the DB CLOB.
If I remove the getClobVal() I get an OPAQUE type that I can use on a XMLType but, still, nothing is stored on DB.
Any suggestion ?
I tried with both OCI and Thin Client

Can anybody help me ?
Is it better to use different strategies ( eg. Stored Procedure, DBMS_XMLSTORE etc, etc. ) ?
Any experience updatating XML Fragment CLOB on Oracle V10 ?

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

1013 ADF project migration does not work

Similar Messages

Maybe you are looking for