Server 2012 cluster - virtual machine live migration does not work

Hi,
We have a hyper-v cluster with two nodes running Windows Server 2012. All the configurations are identical.
When I try to make a Live migration from one node to the other I get an error message saying:
Live migration of 'Virtual Machine XXXXXX' failed.
I get no other error messages, not even in event viewer. This same happens with all of our virtual machines.
A normal Quick migration works just fine for all of the virtual machines, so network configuration should not be an issue.
The above error message does not provide much information.

Hi,
Please check whether your configuration meet live migration requirement:
Two (or more) servers running Hyper-V that:
Support hardware virtualization.
Yes they support virtualization.
Are using processors from the same manufacturer (for example, all AMD or all Intel).
Both Servers are identical and brand new Fujitsu-Siemens RX300S7 with the same kind of processor (Xeon E5-2620).
Belong to either the same Active Directory domain, or to domains that trust each other.
Both nodes are in the same domain.
Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).
All of the vitual machines have virtual hard disks.
Use of a private network is recommended for live migration network traffic.
Have tried this, but does not help.
Requirements for live migration in a cluster:
Windows Failover Clustering is enabled and configured.
Yes
Cluster Shared Volume (CSV) storage in the cluster is enabled.
Yes
Requirements for live migration using shared storage:
All files that comprise a virtual machine (for example, virtual hard disks, snapshots, and configuration) are stored on an SMB share. They are all on the same CSV
Permissions on the SMB share have been configured to grant access to the computer accounts of all servers running Hyper-V.
Requirements for live migration with no shared infrastructure:
No extra requirements exist.
Also please refer to this article to check whether you have finished all preparation works for live migration:
Virtual Machine Live Migration Overview
http://technet.microsoft.com/en-us/library/hh831435.aspx
Hyper-V: Using Live Migration with Cluster Shared Volumes in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/dd446679(v=WS.10).aspx
Configure and Use Live Migration on Non-clustered Virtual Machines
http://technet.microsoft.com/en-us/library/jj134199.aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support
I have also read all of the technet articles but can't find anything that could help.

Similar Messages

Backing up Windows Server 2012 R2 Virtual Machine

When I try to back my Windows Server 2012 R2 Virtual machine up to a NAS, using the Windows Server Utility I get the following errors:
There was a failure in preparing the backup image in one of the volumes in the backup set.
Detailed error: The process can not access the file because another process has locked a portion of the file.
When viewing the errors in Event viewer I get the following error:
The backup operation that started at '‎2014‎-‎03‎-‎12T10:23:08.681735200Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Any help will be appreciated.
Regards
Louis

Have a look, check whether the solution is working for you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/windows-8-backup-error-code-0x807800c5/0ec7fea0-bb4d-44d2-9381-c364ef2c1f6c
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Need help to cancel by Creative Cloud Subscription and Live Chat does not work

I need to cancel by Creative Cloud Subscription and Live Chat does not work for me. The the chat only sent me :You are not currently connected to a chat representative. When a representative was online and I can't send my message out.

Hi Joshua_U,
I would request you to to perform the steps of cancellation mention in these links
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html.
In case you are still unable to complete it, please inbox me your order number.
Note-( Any Creative Cloud whose date of purchase is more than 30 days attracts a penalty except if you are opting to exchange it with different type of CC subscription, the order number of the exchange CC is required to fore go the penalty if applicable)
Regards,
Rajshree

HP Mediasmart Live TV does not work on Windows 10

HP Mediasmart Live TV does not work after Windows 10 upgrade. Error says: Your TV tuner cannot be accessed because it is being used by another application. Please close any programs that might be using it and then try again. Although I am able to open the settings and scan for channels, and I see the channels being found, but still no luck watching after the setup is done. My HP Laptop has a built in HP ATSC/Analog TV Tuner card. (AVerMedia maybe?) I suspect that is may have something to do with the fact that the driver does capture at the same time you are watching (Allows you to pause and then continue watching live TV, also has the ability to scedule recordings) Unfortunatly Windows 10 also removes Windows Media Center, so I can't check with that software, is also possible a remnant may be left behind to support Windows Media Center that is conflicting with something else. Also would be nice if they would fix the installers so it does not uninstall the software, then fail to re-install it. (All without any display or error messages, so your left scratching your head trying to figure out what happened.) I managed to get the rest of MediaSmart to work, although it looks like the internet veiwer may not connect to anything anymore. Looking for an updated driver or installer, or patch that would work for Windows 10. As far as I can tell on the internet HP MediaSmart Live TV is supposed to work on Windows 10.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

ODBC Problems with SQL Server 2012 on Virtual Machine

I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.

My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world!

Windows O/S running in the virtual machine has frozen does not want to shut down

Our old Windows-based PC is a virtual machine on our iMac (it is accessed using VMWare Fusion 2). The Windows XP Home Edition O/S froze when booting, and cannot be shut down by sending a Ctrl-Alt-Del or Force Quitting VMWare Fusion. Putting the iMac in Sleep mode or restarting it makes no difference. The virtual machine is still in a suspended state, and there appears to be no way of either getting it to finish booting the Windows O/S or shutting it down. Any ideas as to how to unfreeze it? At this point in time, all I want to do is get back into the Windows side, rescue any data files I need, and stop using the virtual machine.

VMware Fusion issues should be posted in the VMware Fusion forums:
http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions
That said, you can "Force Shut Down" a virtual machine by holding down the Option key, then clicking on the Virtual Machine Menu. "Shut Down" becomes "Force Shut Down".
More than likely what you'll need to do is hold the Option key, then choose "Force Restart" to get Windows to boot again. Then use "Force Shut Down" to power off the VM, if a normal shut down does not work after that. Do NOT close the VM window, or put the Mac to sleep as this will initiate another suspend procedure.

1013 ADF project migration does not work

I have previously developed a simple ADF application using Jdeveloper 1012 that contains the following components.
1. a data page called start that contains a simple form where a user can input a name and a number
2. this page then forwards onto a dataAction called doSomething that bings these values to a refresh method on a collection that I have written
3. the refresh method then builds up the collection of test values, i.e. 1_David, 2_David, 3_David etc up to the number that the user entered on the form.
4. I have used the invokeCustomMethod within the dataAction to manually force the itterator to refresh on the colleciton when the doSomething dataAction is called.
5. this then forwards onto a dataPage called results that displays the contents of the populated collection as a read only table.
please note that this colleciton is populated on-the-fly using a custom refreshMethod that I have written for the collection and does not retrieve data from a database.
THIS WORKS FINE IN JDEVELOPER 1012.
I have then tried to open this project in Jdeveloper1013. This wizard asks me if I would like to convert the project to the new format - to which I agree, but then when I try and run the program the application fails.
I'd appreciate any help/suggestions that you may have as to why this happens.

Hi Shay,
I'm not getting any specific error messages when I do the conversion, the applicaiton just does not work anymore.
As I have previously said the application I am trying to migrate from 1012 uses a collection that a dataAction populates when it is called using a refreshMethod that I have written.
When I run the "converted" application in 1013 I don't get any errors at all but the applicaiton does not populate my collection any more. I think this may be down to the fact that I am manually resetting the itterator on the collection to -1 (therefore forcing it to be rebuilt when the dataAction is called). I have done this by using the invokeCustomMethod which is no longer supported in 1013.
I am currently discussing this fact here:
1013 - Force Collection To Refresh Different To 1012
I'd appreciate any other ideas/suggestions that you may have as to why the migration process is not working correctly for ADF applications that have been developed in this manner, especially as I would like to convert a VERY large application that was developed in this way using JDeveloper 1012 into 1013 so that I can utilise the new enterprise manager within the OC4J 1013 server.

Webmail worked, Enabled virtual host, now Webmail does not work! HELP!

Hey all, hope this is an easy one. I had mail, and webmail up and running for my main domain. www.example.com. and mail.example.com. I enabled virtual hosting under mail and added the local host alias for my second domain. www.example2.com. Users can now receive email sent to [email protected] Sounds good right. Well now my webmail server does not work, and whats worse is it brings up a list of the directory!!! Any ideas on how to get that back up?

ok, I changed the default index file to index.php, and now I can bring it up and login, but get an error where the folder list usually is...
ERROR:
ERROR: Could not complete request.
Query: CREATE "INBOX/Sent"
Reason Given: Invalid mailbox name

Windows Update fails on Server 2012 R2 Virtual Machine

I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain. The DC (TestVM1) is also set up as a DNS server.
From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
The Windows Update client shows "Error(s) found:" and "Code 8024402F".
Errors in WindowsUpdate.log include
2014-10-17 18:26:14:235 800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send failed with hr = 80072ee7.
2014-10-17 18:26:26:238 800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send request failed, hr:0x80072ee7
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: Failed to download cab file from
http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
2014-10-17 18:26:26:317 800 950 PT   + SyncUpdates round trips: 1
2014-10-17 18:26:26:317 800 950 PT WARNING: Sync of Updates: 0x8024402f
2014-10-17 18:26:26:317 800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Exit code = 0x8024402F
This is blocking further work. Assistance would be greatly appreciated.

I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time. Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
that as a test and got the same error message. I also tried to stop wuauserv and cleaning out the folder and starting it back up. No joy as well. This is a VM server running on ESXi 5.1.  Server 2008 servers dont seem to have
an issue. Server 2012 server don't seem to have an issue. Only this new Server 2012 R2 server. My logs are below:
2014-10-28 14:28:46:104 696 4a4 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-28 14:28:46:104 696 4a4 WuTask Uninit WU Task Manager
2014-10-28 14:28:46:198 696 4a4 Service *********
2014-10-28 14:28:46:198 696 4a4 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-28 14:28:46:198 696 4a4 Service *************
2014-10-28 14:29:24:198 696 5c8 Misc =========== Logging initialized (build: 7.9.9600.17092, tz: -0400) ===========
2014-10-28 14:29:24:198 696 5c8 Misc   = Process: C:\Windows\system32\svchost.exe
2014-10-28 14:29:24:198 696 5c8 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-10-28 14:29:24:198 696 5c8 Service *************
2014-10-28 14:29:24:198 696 5c8 Service ** START ** Service: Service startup
2014-10-28 14:29:24:198 696 5c8 Service *********
2014-10-28 14:29:24:214 696 5c8 Agent   * WU client version 7.9.9600.17092
2014-10-28 14:29:24:214 696 5c8 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-10-28 14:29:24:214 696 5c8 Agent   * Access type: No proxy
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Agent   * Network state: Connected
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-28 14:29:24:542 696 5c8 DtaStor Data store successfully created
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing global settings cache ***********
2014-10-28 14:29:24:542 696 5c8 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS status server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * Target group: (Unassigned Computers)
2014-10-28 14:29:24:542 696 5c8 Agent   * Windows Update access disabled: No
2014-10-28 14:29:24:542 696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-28 14:29:24:542 696 5c8 WuTask WuTaskManager delay initialize completed successfully..
2014-10-28 14:29:24:542 696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
2014-10-28 14:29:24:542 696 5c8 Report CWERReporter::Init succeeded
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-28 14:29:24:542 696 5c8 DnldMgr Download manager restoring 0 downloads
2014-10-28 14:29:24:557 696 5c8 AU ########### AU: Initializing Automatic Updates ###########
2014-10-28 14:29:24:557 696 5c8 AU AIR Mode is disabled
2014-10-28 14:29:24:557 696 5c8 AU   # AU disabled through User preference
2014-10-28 14:29:24:557 696 5c8 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-28 14:29:24:557 696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-28 14:29:24:557 696 5c8 AU AU finished delayed initialization
2014-10-28 14:29:24:557 696 234 DnldMgr Asking handlers to reconcile their sandboxes
2014-10-28 14:29:35:776 696 578 IdleTmr Incremented idle timer priority operation counter to 1
2014-10-28 14:29:37:307 696 52c AU Triggering AU detection through DetectNow API
2014-10-28 14:29:37:307 696 52c AU Triggering Online detection (interactive)
2014-10-28 14:29:37:323 696 5c8 AU #############
2014-10-28 14:29:37:323 696 5c8 AU ## START ## AU: Search for updates
2014-10-28 14:29:37:323 696 5c8 AU #########
2014-10-28 14:29:37:323 696 5c8 SLS Retrieving SLS response from server...
2014-10-28 14:29:37:323 696 5c8 SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
2014-10-28 14:29:58:339 696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
2014-10-28 14:29:58:339 696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
2014-10-28 14:29:58:385 696 5c8 Report *********** Report: Initializing static reporting data ***********
2014-10-28 14:29:58:385 696 5c8 Report   * OS Version = 6.3.9600.0.0.196880
2014-10-28 14:29:58:385 696 5c8 Report   * OS Product Type = 0x00000007
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Brand = VMware, Inc.
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Model = VMware Virtual Platform
2014-10-28 14:29:58:401 696 5c8 Report   * Platform Role = 1
2014-10-28 14:29:58:401 696 5c8 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Revision = 6.00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Release Date = 2013-08-16T00:00:00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Sku Number unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Vendor = Phoenix Technologies LTD
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Family unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Major Release = 4
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Minor Release = 6
2014-10-28 14:29:58:401 696 5c8 Report   * Locale ID = 1033
2014-10-28 14:29:58:401 696 5c8 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:401 696 5c8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:29:58:432 696 b0c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *************
2014-10-28 14:29:58:432 696 b0c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *********
2014-10-28 14:29:58:432 696 b0c Agent   * Online = Yes; Ignore download priority = No
2014-10-28 14:29:58:432 696 b0c Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-28 14:29:58:432 696 b0c Agent   * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2014-10-28 14:29:58:432 696 b0c Agent   * Search Scope = {Machine & All Users}
2014-10-28 14:29:58:432 696 b0c Agent   * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
2014-10-28 14:29:58:432 696 b0c SLS Retrieving SLS response from server...
2014-10-28 14:29:58:432 696 b0c SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-10-28 14:29:59:135 696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-10-28 14:29:59:135 696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-10-28 14:29:59:135 696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-28 14:29:59:135 696 b0c Setup Checking for agent SelfUpdate
2014-10-28 14:29:59:135 696 b0c Setup Client version: Core: 7.9.9600.17092 Aux: 7.9.9600.17031
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-10-28 14:30:00:151 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:151 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
2014-10-28 14:30:00:167 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:167 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:167 696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-28 14:30:00:167 696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-10-28 14:30:00:167 696 b0c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-10-28 14:30:00:323 696 b0c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-28 14:30:00:323 696 b0c PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2014-10-28 14:30:01:104 696 b0c PT WARNING: Cached cookie has expired or new PID is available
2014-10-28 14:30:01:104 696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-28 14:30:01:198 696 b0c Agent Reading cached app categories using lifetime 604800 seconds
2014-10-28 14:30:01:198 696 b0c Agent Read 1 cached app categories
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
2014-10-28 14:30:41:151 696 b0c PT   + SyncUpdates round trips: 14
2014-10-28 14:30:41:151 696 b0c PT WARNING: Sync of Updates: 0x8024402f
2014-10-28 14:30:41:151 696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Exit code = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent *********
2014-10-28 14:30:41:151 696 b0c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:30:41:151 696 b0c Agent *************
2014-10-28 14:30:41:151 696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
2014-10-28 14:30:41:151 696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented PDC RefCount for Network to 0
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented idle timer priority operation counter to 1
2014-10-28 14:30:41:151 696 6fc AU >>## RESUMED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Search callback failed, result = 0x8024402F
2014-10-28 14:30:41:151 696 6fc AU #########
2014-10-28 14:30:41:151 696 6fc AU ## END ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU #############
2014-10-28 14:30:41:151 696 6fc AU All AU searches complete.
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Failed to find updates with error code 8024402f
Derek
Systems Engineer
Derek Desktop Engineer

Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

After Installing SQL Server 2012 Service Pack the RDL reports do not work

I installed SQL Server 2012 Service Pack on backEnd sharepoint and also on BI Server that host Reporting Service.(Before installation everything was working properly)
After this installation the RDL reports do not open and I receive this error message.
The permissions granted to user 'domain\username' are insufficient for performing this operation. (rsAccessDenied)
I also receive the same error message on changing DataSource, Parameters and subscription.
I should mention that, I am using Reporting Services in the Integration Mode. I want to open and modify RDL reports from SharePoint and inside the SharePoint Document Library.

Hi Hedayat,
Thanks for posting your issue,
To solve this problem you have to grant your SQL Reporting Service Application Pool
Account (whatever is running your SQL Service Application, see Central Admin -> Manage Service Application -> SQL Server Reporting Services)
Full Control to the web application that report is being deployed to in your particular case.
Or you could just use the powershell command below:
$webApp = Get-SPWebApplication –Identity http://yoursharepointapp
$webApp.GrantAccessToProcessIdentity(“domain\SSRSAccount”)
Also, check out below mentioned URLs for more details and fixes of this issue
http://paulliebrand.com/2013/09/25/ssrs-and-permissions-granted-to-user-are-insufficient-for-performing-this-operation/
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ea477ec-ea12-4a3e-bc33-2fcf9d52b84e/error-rsaccessdenied-nt-authoritynetwork-service-are-insufficient?forum=sqlreportingservices
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

RDS on server 2012 and outlook as a published app not working.

You need a VL copy for office, OEM will not work,
You can also install O365 on the Server but that is a little more complicated, then you can have every one activate it with their E3 license.
We have both systems in production for multiple customers and it works without issues.

We are creating a new environment to use RDS, exchange 2010, office 2010 or 2013. When publishing an app of outlook 2010 or 2013 they do not work in RDS. Just keeps spinning and never launches. it will not launch from the server as well at time but at times it will if i am on the server directly via RDP.
This is a hyper-v environment as well running on server 2012 host not sure if that makes any difference with this issue though.
Any ideas here?
Thanks in advance
T.
This topic first appeared in the Spiceworks Community

OS X Restore with Time Machine via LAN does not work

Hi all,
i did a full backup of my mac mini with mountain lion on a time capsule via LAN. Tried to do a full restore on a new hard disk and connect to the time capsule after i booted into a restore environment. I was able to choose the time capsule as the restore source and connected using my dedicated backup user, which was also used to create the backup before. But after i cannot chose my just created backup!
Using a local USB disk with time machine everythings workes fine. But the main reason why i chosed time capsule is, that i can make my backups of all the used mac books and minis via LAN / WLAN...
So, is there anybody else experiancing this Problem?
Regards,
David

Hi,
tested OS X Restore with Time Machine via QNAP NAS Box - working without any problem. So with the Time Capsule it might be firmware problem?!
Will update thies Thread when i've any news...
David

New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it. I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything.
When you say you can't reach OWA is that internally or externally? As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
with Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
Server. )
Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
https://mail.theirdomainhere.tld
Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server.

Serial communication does not work in an executable.

I have created a vi that communicates with a serial device. It works fine on the computer that it was creatd on. I then created an application and then built an installer to put it on another machine. The second machine does not have LV 2009 on it. Once installed on the machine the vi does not work. When it runs on the computer with LV 2009 the the com port control is a pull down, and it lists all comports on the computer and then you select the one you want to connect with. The computer that the vi is installed on does not list the available com ports. This leads me to believe that there is no serial comms support in the installable version. What do I do now?? I noticed that you can add "Additional Installers" when you build the installer and one of them is NI-Serial 3.4. I try to add this and a message said that it had to get, so I didn't use it thinking it was more than I needed and that standard com port driver would be included. Am I wrong here or am I missing something else?? All help is greatly appreciated.
[email protected]
Solved!
Go to Solution.

claudio.rossi wrote:
Hi at all!!
I'm new in NI forum.
I have one similar problem. My VI communicate with external device on serial port. The VI work very well, but when I create executable (.exe) file with Labview application builder (on Labview 2010) the .exe don't use serial port!!! The executable run perfectly (nothing error or warning by the application builder), but the serial data on selected COM port isn't send!!! Also on the PC where I developed the VI!!!
What do you mean by your last sentence? Are you trying to say that you can't run your executable even on the same computer on which you developed the application? If so, was LabVIEW open when you tried to run it? Try quitting LabVIEW; if you had previously run your VI and didn't close the serial port, LabVIEW might have kept it open, which would prevent the executable from accessing it. If the executable won't run on the development machine it's unlikely to be resolved by installing VISA since you need that installed for the VI to work properly in the development environment. Do you have any error handling in your code that would indicate if an error occurred after trying to write to the serial port (an indicator on the front panel, or a call to Simple Error Handler)?

Server 2012 cluster - virtual machine live migration does not work

Similar Messages

Maybe you are looking for