1046: mx:automation not found error

I'm using Flex Builder 4.5 and there must be some configuraiton problem as my Flex project executes correctly on one machine but the other one complains about:
1046: Type was not found or was not a compile-time constant [mx.automation]:IAutomationTablularData
This Flex project doesn't make any references to mx.automation. I've checked through the Flex Build Path in Properties, but don't see where its referencing anything that could be causing this error.
Thanks, Norman

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

Similar Messages

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
 //Set up UI
 textArea = new TextArea();
 textArea.setSize(500,280);
 textArea.move(20,54);
 addChild(textArea);
 textInput = new TextInput();
 textInput.setSize(500,24);
 textInput.move(20,340);
 textInput.addEventListener(ComponentEvent.ENTER,checkKey);
 addChild(textInput);
 button = new Button();
 button.width=50;
 button.label="Send";
 button.move(20,370);
 button.addEventListener(MouseEvent.CLICK, sendMsg);
 addChild(button);
 chatName = new TextInput;
 chatName.setSize (100,24);
 chatName.move (80,370);
 chatName.text="<Enter Name>";
 chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
 addChild(chatName);
 //Connect
 rtmpNow="rtmp:/VideoChat ";
 nc=new NetConnection;
 nc.connect (rtmpNow);
 nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
 cam = Camera.getCamera();
 mic=Microphone.getMicrophone();
 //Camera Settings
 cam.setKeyFrameInterval(15);
 cam.setMode (240, 180, 15, false);
 cam.setMotionLevel(35,3000);
 cam.setQuality(40000 / 8,0);
 //Microphone Settings
 mic.gain = 85;
 mic.rate=11;
 mic.setSilenceLevel (25,1000);
 mic.setUseEchoSuppression (true);
 //Video Setup
 vid=new Video(cam.width, cam.height);
 addChild (vid);
 vid.x=10, vid.y=20;
 //Attach local video and camera
 vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
 good=e.info.code == "NetConnection.Connect.Success";
 if(good)
 //Set up shared object
 text_so=SharedObject.getRemote("test", nc.uri, false);
 text_so.connect (nc);
 text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
 for (var chung:uint; change<e.changeList.length; chng++)
 switch(e.chageList[chng].code)
 case "clear":
 break;
 case "success":
 break;
 case "change":
 textArea.appendText (text_so.data.msg + "\n");
 break;
private function cleanName(e:FocusEvent): void
 chatName.text="";
private function sendMsg(e:MouseEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
private function checkKey (e:ComponentEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
 msg=e.info.code == "NetConnection.Connect.Success";
 if(msg)
 nsOut=new NetStream(nc);
 nsIn=new NetStream(nc);
 //NetStream
 nsOut.attachAudio(mic);
 nsOut.attachCamera(cam);
 nsOut.publish("camstream");
 nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

"1046: Type was not found" for a custom class calling a custom class

This should be easy... but I've spent two days on nothing but this error.... I am absolutely at my wit's end.
Basically, I've got a "character" container linked to a MovieClip in the library that is supposed to act as a container for various body parts; head, shirt, pants, etc. For simplicity, I've just got Character class and Head class, both in a "char" package, both classes are named the same as their respective files (Character.as and Head.as, both in an actual file called "char"). Character class is supposed to create an instance of Head, but I always get this 1046 error. The problem is that I've got other body parts with nearly identical classes that ARENT throwing a 1046 error and are working just fine. I went and made a new project to see if I was still having the problem with just character calling 1 simple body part. I do.
In the symbol properties, it's Exported for Actionscript & Export in Frame 1... the class is "char.Head" and "char.Character" respectively. I have tried everything I can find or think of, I've done dozens of Google searches and sifted through dozens of forums. I can't find anything and I've been working on this problem for 24 straight working hours now. I'm completely exasperated......
package char {
import flash.display.MovieClip;
import flash.display.Stage;
import flash.display.Sprite;
import flash.events.Event;
import flash.geom.ColorTransform;
import fl.motion.Color;
import char.Head;
public class Character extends MovieClip {
// 1046: Type was not found or was not a compile-time constant: Head
private var _head:Head;
// reference to get the stage later
private var stageRef:Stage;
public function Character(stageRef:Stage=null) {
trace("NEW CHARACTER");
//1180 Call to a possibly undefined method Head;
_head=new Head();
And here's the contents of Head.as
package char {
import flash.display.MovieClip;
import flash.events.Event;
import flash.display.Stage;
import flash.geom.ColorTransform;
public class Head extends MovieClip {
private var skin_type:uint;
public function Head() {
trace ("NEW HEAD");
Now if I declare the head variable and create a new instance of it in my document class, no problem whatsoever. If I do it in my Character class, it just doesn't stop giving me this error!!! Somebody please help me.
1046: Type was not found or was not a compile-time constant: Head
1180 Call to a possibly undefined method Head;

There is a blank movieclip named Character in the library, yup.
Also in my main handler for my document class calls "mainCharacter = new Character(); "
Here's a chunk of the code from the document class. For the record, it calls "head" as just a test and that works fine. Just doesn't work in "Character"
import char.Character;
import char.Head;
public class MainHandler extends MovieClip {
private static var _instance:MainHandler;
public static function get instance():MainHandler { return _instance; }
public var mainCharacter:Character;
public var head_:Head;
public function MainHandler() {
_instance = this;
mainCharacter = new Character();
head_=new Head();

Query string read as part of file name, throwing not found errors

Hi all, I host a number of Web sites under a CF7 installation, Win2003.
One site in particular is throwing not-found errors in response to certain search bot requests.
In the IIS log, I noticed that for these requests, the query part of the URL is part of cs-uri-stem field value, but is not in the cs-uri-query field where it belongs:
cs-uri-stem= /index.cfm?template=24hour5.cfm
cs-uri-query=<blank>
instead of
cs-uri-stem= /index.cfm
cs-uri-query=template=24hour5.cfm
Evidently something somewhere is interpreting the entire URL as a filename, instead of a file name and a query string. When CF tries to locate the file it is throwing a not-found error.
Maybe there is something weird about the question mark, but it looks normal to me.
I can't seem to stop this error, since it is occuring at the OS, IIS, CF or jrun layer. Does anyone have any idea what is going on here, and what I can do about it?
Thanks in advance.
Joe

Hey Reed, thanks for responding.
I have a Cf utility that parses logs, so I modifed it to print out the ASCII codes for each character. They look normal, as far as I can tell. The question mark has a code of 63 which is correct, and no non-alphabetic characters precede or follow.
One interesting thing is that the stem being called is an index.cfm file, and the query string argument happens to be a template name, and it ends in .cfm. That's why it is making it all the way to CF, which chokes on it, instead of IIS logging a 404 error.
Often an identifiable bot is requesting these bad URLs, though I have spotted another request with agent 'Mozilla/4.0.' I suspect that is some kind of automated scan. (I also see other requests with the same agent name, though a different IP, that look like errononeously URL-encoded requests. These get filtered by URLScan.)
I don't know for sure is whether the specific clients that make these bad calls always make them them wrong way. They appear to. Most clients that access the site do so normally.
I wonder if there could be something in the request header, perhaps that instructs IIS to expect a different charset than what is actually used, or something like that.

Trouble adding a web url link to an existing file: 1046: Type was not found or was not a compile-time constant:

Hi There,
We're trying to add a simple link to an existing Flash file. There looks to be at least 7 separate .as files and a separate swf that loads the main swf which all seems overly complex for what is essentially a page with six buttons on it.
However, we need to add a URL to some of the text. So we converted the text to a button, added an instance name of <ssbpurchasetickets_btn> then added the following Actionscript into the actions layer on the frame the text/button appears:
ssbpurchasetickets_btn.addEventListener(MouseEvent.CLICK, ssbButtonPurchase);
function ssbButtonPurchase(event:MouseEvent):void
navigateToURL(new URLRequest("http://www.url.com/tickets.html"));
When we publish the file we get the following error which seems to cascade into a whole bunch more errors:
Description: 1046: Type was not found or was not a compile-time constant: MouseEvent.
Source: function ssbButtonPurchase(event:MouseEvent):void
We added "ssb" onto the button and functions to ensure there were no conflicts but the same thing occurred. If we copy the button into a new file everything works so it must be conflicting with something in the main files.
Any help would be MUCH appreciated!!!!
Cheers

Thanks for the reply Ned,
The file is set to use AS3 and I'm pretty sure the original should be set to AS3 as the .as files look like AS3 syntax to me - here's a sample:
protected function handleWwrdButtonClick(e:ButtonEvent):void {
Browser.open(globalVar.xml.wwrd.item[0].@url, globalVar.xml.wwrd.item[0].@target);
OmnitureTracker.trackFeaturedContentClick('http://www.url.com/movies/international', 'wwrd_button');
timer.stop();
timer.removeEventListener(TimerEvent.TIMER, onTimer);
I'm wondering if all the Actionscript has be placed into one of the .as files as there isn't any Actionscript in the Flash project - a part from the odd stop()
Really stuck on this one (I'm not an expert at all) so any help in deciphering the project would be much appreciated.
Cheers

1046: Type was not found or was not a compile-time constant: Event.

I am more than a little frustrated. I'm using Flash Professional CS5.5, attempting to publish ActionScript 3.0 for FlashPlayer 10.2
My code begins with:
import flash.events.MouseEvent;
import flash.events.Event;
import flash.events.KeyboardEvent;
import flash.utils.Timer;
import flash.events.TimerEvent;
Then much later I have:
teamFourCar_mc.addEventListener(Event.ENTER_FRAME, trackPosition);
function trackPosition (event:Event)
and I keep getting a compiler error:
Scene 1, Layer 'actions', Frame 1, Line 434
1046: Type was not found or was not a compile-time constant: Event.
I have imported the class "Events". I have successfully used the same construction in other scripts... in fact, virtually the same construction is included in Code Snippets as Fade In and Fade Out. Adding ":void" after (event:Event) makes no difference. I have Googled - to no avail - and spent the better part of a day reading through the on-line help files, but the solution is still eluding me.
It's probably so simple I'm going to smack myself in the forehead and mutter "Duh!" when I find a solution...
If you can do anything to hasten that event (no pun intended) I (with the possible exception of my forehead) will be very grateful.
TIA
Terry

Sinious:
The entire code of the main movie clip is at http://pastebin.com/JYfLUhh1
A sample of one of the four "problem" movie clips is at http://pastebin.com/gQGDyngx
There is nothing wrong with the "problem" clip. The problems are in the main movie clip:
Scene 1, Layer 'actions', Frame 1, Line 427
1046: Type was not found or was not a compile-time constant: Event.
Scene 1, Layer 'actions', Frame 1, Line 612
1046: Type was not found or was not a compile-time constant: Event.
Scene 1, Layer 'actions', Frame 1, Line 1819
1046: Type was not found or was not a compile-time constant: Event.
There are the only three occurrences of a function with (event:Event). Two are ENTER_FRAME (427 & 1819) The other is COMPLETE from Loader.info
Auto format reported a syntax error "near 'if(movingCar.currentFrame == (dieRoll * 24) + movingCarPosition)' " but I can't detect what, if anything, is wrong with it.
I'm not an experienced developer... in fact, the last programming I did before taking up Flash three months ago was with QuickBasic under DOS 6.2... therefore, please try not to roll your eyes too much when you see how inelegant the code is.
I have a working version, but it's over 7,000 lines and a memory hog. I'm trying to make it more elegant and more efficient. BTW, the three (event:Event) functions are in the working version in more or less the same places, with the same calling code.
I hope you can figure it out.
Thank you in advance

Help! "1046: Type was not found or was not a compile-time constant:TimerEvent."

I am getting the followiing error in my main document class:
"1046: Type was not found or was not a compile-time constant:TimerEvent."
It's showing in line 47 and 54 (in red below). Any help would be appreciated. BTW, this is my first time creating a main document class since graduating to class files!:
package
    //**************** IMPORT STATMENTS *********************
    import flash.display.MovieClip;
    import com.greensock.TweenLite;
    import flash.utils.Timer;
    public class Main extends MovieClip
        //***************** Variables ***************************
        /*private var appStoreURL:URLRequest = new URLRequest("http://itunes.apple.com/us/artist/quackenworth/id518210161");
        private var facebookURL:URLRequest = new URLRequest("http://www.facebook.com/quackenworth");
        private var twitterURL:URLRequest = new URLRequest("http://www.twitter.com/quackenworth");*/
        private var MainScene:Main = new Main();
        private var PopUp_MoreApps:MoreApps_mc = new MoreApps_mc();
        private var PopUp_About:About_mc = new About_mc();
        //*****SPLASH SCREEN ***
        private var mc_timerSplash:Timer;
        private var splashScreen:mcSplashScreen;
        //*****************CONSTRUCTOR CODE ***********************************************************************************
        public function Main()
            mc_timerSplash = new Timer(3000,1);
            mc_timerSplash.addEventListener(TimerEvent.TIMER, StartTimer);
            //When timer is finished stop the timer;
            mc_timerSplash.addEventListener(TimerEvent.TIMER_COMPLETE, timerCompleted);
            splashScreen = new mcSplashScreen();
             addChild(splashScreen);
            splashScreen.x = stage.stageWidth / 2;
            splashScreen.y = stage.stageHeight / 2;
            mc_timerSplash.start();
        //*********** FUNCTIONS *********************************
        private function timerCompleted(e:TimerEvent):void
                mc_timerSplash.stop();
                mc_timerSplash = null;
        private function StartTimer(e:TimerEvent):void
            TweenLite.to(splashScreen, 1, {alpha:0, onComplete: SplashScreen});
        private function SplashScreen():void
            removeChild(splashScreen);
            addMainScene();
        private function addMainScene():void
            addChild(MainScene);
            MainScene.x = 489;
            MainScene.y = 350;
            //TweenLite.from(MainScene.wbbIntro_mc, .5, {alpha: 0});
            TweenLite.from(MainScene, 1, {alpha:0});
            TweenLite.to(MainScene.girls_mc, 1, {y:395, delay:.3});
            TweenLite.to(MainScene.boys_mc, .5, {y:396, delay: .6});
            TweenLite.to(MainScene.Joe_mc, .5, {y:339, delay: 1});
            TweenLite.to(MainScene.Paul_mc, .5, {y:322, delay:1.2});
        private function removeMainScene():void
            removeChild(MainScene);
            TweenLite.to(MainScene.girls_mc, .1, {y:690});
            TweenLite.to(MainScene.boys_mc, .1, {y:693});
            TweenLite.to(MainScene.Joe_mc, .1, {y:636});
            TweenLite.to(MainScene.Paul_mc, .1, {y:619});

Now that the error is solved, when I test nothing happens. I just get a blank screen.
What is supposed to happen? When the program opens a splash screen should be added for 3 seconds and then fade out. Then some main screen movie clips should be added to the stage.

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

Private Key Not Found Error in Ldaps

Hi,
I am facing "Private Key Not Found" Error in ldaps. The key and the SSL certificate is stored under the same location. The certificate is self signed certificate and in .pem format. When I am trying to install the certifcate through SUN ONE Console it throws the following error
"Either this certificate is for another server, or this certificate was not requested using this server".
can any one help me in this regard.
Regards
Senthil
Edited by: senlog80 on Dec 30, 2008 3:18 AM

Or even better, check the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=924320&_NLANG=E">924320</a>.
Symptom:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
Other terms
RSR00002, RSR_OLAP_BADI
Reason and Prerequisites
This problem is caused by a program error.
Solution
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280"SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Assign pts if helpful.

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

1046: mx:automation not found error

Similar Messages

Maybe you are looking for