10g DB Installation on Windows

Can you help me find 10g DB Installation on Windows instructions? Thanks in advance...

Given that 10g isn't available to the public yet, the installation instructions probably aren't available yet. If you are in the 10g beta program, I would suspect that Oracle would have provided someone in your organization with the appropriate beta documentation (or links to it).
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

10g Database Installation in Windows Vista

Hi,
I have downloaded 10g database for vista from Oracle site. When i tried to install,i.e, after clicking on setup/OUI a command prompt appears and nothing else is happening.
Mine is a new laptop Vostro series.
Could somebody provide me steps in getting 10g db installed.
Regards
Sudhakar T

The steps are described in detail here
If your setup.exe does not start, check your Vista security setting (also described same place).

10g database installation in windows2003

Following error found in the insallation of 10g database installation in Windows 2003.
Kindly give me the solutions in [email protected]
Thaning you
Mohan, Milma, Tvm.Kerala India.
Error list from Oracle configuration assistant
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Oracle Net Listener Startup:
Running Listener Control:
E:\oracle\ora10g\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
java.io.IOException:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1090)
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1026)
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1007)
     at oracle.sysman.assistants.util.Oradim.addEntry(Oradim.java:530)
     at oracle.sysman.assistants.dbca.backend.InstanceStep.executeImpl(InstanceStep.java:243)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
     at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:250)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:201)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2394)
     at java.lang.Thread.run(Thread.java:534)
Configuration assistant "Oracle Database Configuration Assistant" failed

I had the same problem and solved it by doing the following:
Do not stop the DBCA to do this.
Go to Start->Control Panel-> Services -> oracleserviceyoursid and start the service. That will get you through that error.
Just in case you see this one as well....I did encounter a TNS error after that. I resolved this by commenting out (#) the line SQLNET.AUTHENTICATION_SERVICES=(NTS) in SQLNET.ORA file.

10g installation on Windows

I have a Windows server that is currently running 3 instances from the ora92 home. I installed 10g into a new home TEST102, everything worked fine except for the Net config assistant choked, below is the log tail:
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora102SE
Parameter "orahnam" = OraHome102SE
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora102SE\network\install\netca_typ.rsp
Done parsing command line arguments.
Environmental error detected: The current Oracle Home and the Oracle Home passed from the installer are not the same. Oracle Net Configuration Assistant cannot continue.
It is recommended that you continue installation without completing Oracle Net configuration. Once the installation is complete run the Oracle Net Configuration Assistant separately after checking that the ORACLE_HOME environment variable is not set (preferred on Windows platforms) or that it is set to the correct Oracle Home.
Oracle Net Services configuration failed. The exit code is 1
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: hashcode for cfSession for exit tool exec: 4403749
INFO: executing the single exit-only tool
Now I am trying to run the Net config assistant outside of the installer and configure a 10g listener for the 10g instance using a port different from the 1521 that teh 9i listener is using and it keeps telling me that:
The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as is but it will not be possible to start the listener until the conflict is resolved...
I have tried several different ports (the only thing that could be in conflict, I think) and I keep getting the same message..
HELP!!
Has anyone out there set up a 9i and 10g installation on Windows using two different listeners, one for the 9i and another for 10g?

Yes, I have read this other thread you have cited but there is no conclusion - other than maybe by rerunning the install he overcame the issue and never completed the thread. In my case, the initial 10g install failed to run the net config assistant and there never was a 10g listener service created. Also, now I try to run the net config assistant stand alone and it refuses to create a listener service...claims that there is a conflict, even if I try on other than the default port.
I'm thinking the conflict lies with the fact there is an up and running 9i listener service and yes that listener is active because it is servicing a live production instance.
Our goal was to install a 10g instance with it's own separate listener, import our schemas and test our app on a 10g database then one day turn the 10g into the production instance.
Our plan was to avoid endangering the production environment by even trying to service the 9i database with the 10g listener. You cannot use a 9i listener for a 10g database but from what I read in the other thread you have cited, to try to fire up the 10g listener to service the 9i production instance would have resulted in a loss of servicve to the production environment if I experience the same phenomena as the fellow in the other thread.
Thank you for your time and consideration here...
I believe I should propose to have a separate server box set up to host this new 10g database. Our overall objective is to keep the production system up and running no matter what.
In the old days I remember that if too many attempts were made at installing on a Windows platform the registry would get hosed up beyond repair and the only out was to re-image the box and start over with a fresh copy of teh Windows operating system:-)
Let me know if you have any further suggestions...
Regards-
Jim

Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
Raghav

We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

BI 10g multiple installation on same windows machine

Hi All,
I have a requirement where in I want to install OBIEE 10g twice on the same windows server. Can we achieve this by installing it the second time as another OS User? What are the steps that we need to follow in this scenario?
Most importantly, Is this approach supported by Oracle?
Thank you so much,
Krishi

Hi Krishi,
Yes, I think we can install OBIEE 10g on the same windows box multiple times. However, there is some manual effort needed to change the port numbers of each NQServer, sawserver, javahost,oc4j instances to resolve port conflicts.
I do not remember oracle saying that this kind of design is not supported though.
Hope this helps.
Thank you,
Dhar

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Grid Infrastructure installation on Windows 2008 R2 problem

Hello there,
I tried to install Grid Infra 11gr2 on windows 2008 R2. I followed all the documentation, but i'm unable to install it. It always end with an error at the grid configuration step (OracleOHService ends unexpectedly, ohasd log says "caught exception"). I've got an SR opened, no answer for the moment ...
Did someone a least managed to install grid infra on 2008 R2 ?
It is certified, 2008 R2 is mentioned in the documentation, this is not my first RAC installation on windows (10g, 11gr1 on 2003, 2008 R1). But this time I'm totally stuck.
PS : I love Linux.

Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

Problem with 10G R2 installation (OUI - 10133 Invalid Staging Area) on W2K3

I'm getting a strange error installing 10G R2 Database on a Windows 2003 server. I get "OUI - 10133 Invalid Staging Area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area." This happens when I choose an Advanced installation or when I choose a starter database.
The funny thing is that I've performed this installation with this exact installation disk on a virtual server on my laptop with Windows 2003.
Also, I ran a quick test with the 10G R1 installation files and I don't get the error. I want to run tests on case insensitivity with LIKE searches (a new feature enabled in 10G R2) so I can't use 10G R1.

I have seen that problem frequently and it is because for some reason the installer doesn't like burned CD's. Copy all the staging files over to disk. I usually download the zip files onto a staging drive on the server, unzip, install, then delete the install files when I'm done if I need the space.
This has two major benefits: I don't run into the "staging area" error and the install only takes about 30 minutes compared to about 3 hours when installing from CD.

Uninstalling oracle 10g enterprise edition from windows vista

HI There,
I want to uninstall oracle 10g enterprise edition from windows vista home premium edition. I have uninstalled it using oracle universal installer and then deleted folder from program files. But I am unable to delete the main folder i.e. D>Oracle..
It is displaying error message 'access denied' Please suggest me on this issue.. How can I delete that one so that I can instal it again. I would be really grateful.
kind regards

Can someone help me on this issue.. That would be great...

How to get 10g XE setup for windows xp?

Dear All,
Need help for opening a .dmp file.
The file is a database export of Oracle 10g so i want to installed Oracle 10g XE on my windows xp pro import .dmp file & access the data.
Please guide me for the same.
Thanks in advance.
Parag

ABKPBM wrote:
Thanks for the response.
Firstly i am a new bee in databases especially Oracle DB.
I have received the .dmp file from my boss with info that its a Oracle 10g DB and how can we access it or use it.
So i decided to use Oracle 10g XE for this purpose by using the documentation only.
I got stuck as unable to find the Oracle 10g XE setup on Oracle website.
I now have following queries:
1) Weather my thinking is in write direction .
2) How to get Oracle 10g XE setup.
3) Will Oracle 11g XE setup which is now available on oracle website will be able to import .dmp file from Oracle 10g DB.
4) How can i better myself with Oracle DB concepts to resolved the issue.
Regards
Parag
So you haven't even installed XE yet? If so, then you are nowhere near being able to use the .dmp file. First you have to have a working database, then you can use use the import utility to import the contents of the .dmp file into the working database.
The entire documentation library for all versions and products is located at tahiti.oracle.com. Drill down to your product and version and you will be looking at the entire doc library for said product/version. Including the Installation Guides.
"How can i better myself with Oracle DB concepts"
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- *Read a chapter a day from the Concepts Manual*.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- *When you have finished reading the Concepts Manual, do it again*.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Oracle 10g client installation on OpenVMS 8.3 Itanium

I am trying to perform the installation of Oracle 10g client installation on OpenVMS 8.3 Itanium. I am getting the OUI (Oracle Universal Installer) window up and as soon as I click the "next" button it errors. The error is:
SEVERE: OUI-10207:There is not enough disk space on the OUI swap area /dsa50/temp/OraInstall2007-06-05_06-19-23PM. Please make at le
ast 9MB of space available and retry.
The disk for the oracle installation temp location and home location are in different directories on the same ODS-5 formated disk. The disk has approximately 251711296 free blocks.
The trace.log located in the <oracle_home> area shows the following:
in ssGetVolumeFreeSpace
in ssGetVolumeFreeSpace:before getFreeSpace:DSA50
Vol name is DSA50
Disk name is [.DSA50]
Disk=, Free blocks = 3362
in ssGetVolumeFreeSpace:after getFreeSpace:3362
returning from ssGetVolumeFreeSpace
The "temp" disk is DSA50.
Has anyone seen this issue with installation of the client on a large disk?
Are there any suggestions on what to do to correct this issue?

SEVERE: OUI-10207:There is not enough disk space. This error may be present at the Open VMS Itanium platform at it is due to bug 5981203 "OUI CALCULATES AVAILABLE DISK SPACE WRONG" and bug 5580279 "OUI FAILS WITH OUI-10207 ERROR". It is fixed in 10.2.0.3.0
As a workaround, use a logical diskname or the volume name and not the physical device name
~ Madrid

10g DB Installation on Windows

Similar Messages

Maybe you are looking for