10g Forms can't run on windows 7

Have developed forms in oracle 10g. And tried to running it on windows 7 64 bits. Using all browsers available to me. but yet the result is blank page. Any help please

check to see if jinitiator is installed. Try removing / reinstalling.

Similar Messages

  • Oracle 10g form not always running in windows 7

    hello all of you experts , the query which I am going to post here is very annoying for me but it there might be a simple solution to my problem. I have installed oracle developer 10g on windows 7. Changed the formsweb.cfg file so that it uses java plug in rather than jinitiator I have installed the JRE version 6, now the problem is that when i try to run a form sometimes it runs properly but sometimes the browser window becomes blank and the form is not visible in it and yes the splash screen which shows the name of application server stays there on the screen. the problem is in internet explorer, mozilla and chrome as well didn't check on any other browser. Please help me out i would be grateful to you guys out there. Just to let you know that this annoying behavior is not always there, i dont know why some forms do run properly but some of them dont.

    That is actually not an uncommon symptom for any Windows platform. However, I will say that if you are running on Windows 7, it should be Win7-32bit and you should have installed the 10.1.2.3 patch set. Anything else would not be considered certified by Oracle and therefore not supported. The details on how to properly install Forms/Reports 10.1.2 on Win7 are outlined in MyOracleSupport note 1292919.1
    Assuming you covered all that, with Dev Suite this often happens when you have abandoned a process previously then tried to start another before the first has been terminated. In other words, next time you have this happen close ALL open browser windows then open the Windows task manager. Look for any orphaned frmweb.exe processes and kill them. Now go back and try starting a form. It should work now.
    It is never a good idea to terminate a running form by closing the browser. It is important that you close the form first (e.g. using the Exit button in the form) then close the browser. Closing the browser while a form is running can cause runtime processes to become orphaned. Generally these will be cleaned up when FORMS_TIMEOUT is reached (usually 15 minutes), but the point is that you have prevented a clean shutdown from occurring. So always make a best effort attempt at closing the form properly. End-users should be encouraged to do the same when the application is put into production.

  • Load balancing 10g forms - Connection from new browser window not supported

    Load balancing 10g forms - Connection from new browser window not supported
    We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
    We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
    In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
    The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
    <session-tracking
    cookies="enabled">
    </session-tracking>
    This all works fine in most cases.
    The problem I am having is if I do one of the following on the client machine:
    1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
    2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
    If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
    oracle.forms.net.ConnectionException: Connection from new browser window not supported
    From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
    Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
    The problem is that I need this enabled in order for the load balancing to work.
    Does anyone know of any other workarounds or patches that might help resolve this?
    We're using Application server 10.1.2.0.2 running on windows 2003 servers.

    You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
    I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
    Has anyone actually managed to get this to work, or am I doing something wrong?
    I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
    I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
    I'm at the point now of giving up and writing some custom scripts to do the job instead...

  • 10g Form - Can i invoke ms word within the from?

    Hi everybody, I would appreciate if someone out there can help me with it......
    On the form i have an ID Field.
    I have a master MS Word file on the network drive.
    Firstly
    I have a button on the form. When pressed it should be able to create a New Folder on the network drive with the name of the folder same as ID Field. At the sametime it should copy the Master MS Word file and put it in the newly created folder.
    Secondly
    I want to open this Ms word file in the newly created folder within the 10g form and not run outside the form.
    Kindly help........
    irfi

    Hi Francoise, Thank you for your reply.
    The MS Word file resides on a shared folder on the server and doesnt get stored in the database (Independent of the database).
    What i actually need is to be able to do 4 actions with a trigger on the button: meaning when the button is clicked it should:-
    1- Create a new folder on the server
    2- Copy the Original Master File to newly created folder.
    3- The name of the folder to be the same as the ID Filed which is binded to a table.
    4- To open the Ms Word file from the newly created folder within the oracle form and not like i have done in vb (Shell to open outside).
    I have done this similar project in vb6 (Kindly have a look)
    ServerFolderPath = "\\servername\foldername"
    Private Sub Cmdsave_Click()
    Dim Qry As String
    Dim Re As New Recordset
    Qry = "select * From IDRegistration where IDNo = '" & TxtIDNo.Text & "'" '(SQL Table)
    If EditID = False Then
    Re.Open Qry, DB, adOpenDynamic, adLockOptimistic
    If Re.RecordCount > 0 Then
    MsgBox "File with same ID Exists", vbInformation
    Else
    fso.CreateFolder ServerFolderPath & IDNo
    fso.CopyFile ServerFolderPath & "one.doc", ServerFolderPath & IDNo & "\" & IDNo & ".Doc" '(one.doc is the master file)
    Shell "c:\Program Files\Microsoft Office\Office11\winword.exe " & ServerFolderPath & IDNo & "\" & IDNo & ".doc", vbMaximizedFocus
    End If
    Please advice Thanks for your time!
    irfi

  • How can i run a windows based program on mac book pro

    Can I run a windows based program on mac book pro mountain lion 10.8.4

    You can use bootcamp to install windows natively on the hard drive.  You then choose which OS you wish to use at startup - OS X or Windows.
    You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

  • How can I run a windows Cd on my mac?

    How can I run a Windows Cd on my Mac?

    Inside CrossOver Mac, Parallels Desktop, or similar products.
    (67907)

  • Can I run a windows software program taht is on a CD on my macbook pro after I install bootcamp and windows xp home?

    Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?

    genepaquin,
    the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.

  • Can you run a window version of LabVIEW on an Apple MacBook Pro using boot camp?

    Can you run a window version of LabVIEW 8 on an Apple MacBook Pro using boot camp?

    I don't have a mac, but you may want to read this:
    http://themacview.blogspot.com/
    Should give you more info about what NI is saying.
    Matt Holt
    Certified LabVIEW Architect

  • Can you run a windows only Photoshop plugin on a Mac using Parallels?

    Can you run a windows only Photoshop plugin on a Mac using Parallels?   In particular a .8BF plugin like PTFilters.8BF  or Super Cubic.

    If you also have a Photoshop version of the Photoshop application, the answer is of course YES.
    Otherwise, the answer is no,
    If you have the CC subscription, then of course you can install a Photoshop Windows version and run your plug-in.  That'll be separate from your Photoshop Mac install..

  • ACL Errors, Can't Running Any Windows Program (such : CMD, Notepad, TaskMgr, etc)

    Hello guys, Please help me.
    Today I got weird Problem, My Windows 7 Ultimate eventually can't execute any Windows Programs, such : Msiexec, Cmd, Notepad, Taskmgr, Msconfig, Regedit, etc.
    When I tried to run any Windows Programs, the Message Box Appeared with this message : Insufficient system resources exist to complete the requested service.
    Then I checked my System32 Directory, I was shocked because All of Windows Defaults Programs appeared with Locked Icon.
    Then I checked 1 by 1 Windows Program, for an Example : dcdiag.exe. I checked the Security Tab and I got this notifications : No Permissions have been assigned for this object.
    Warning : This a potential security risk because anyone who can access this object can take ownership on it. The object's owner should assign permissions as soon as possibe.
    Other Informations : 
    1. My Windows account Privilege is Administrator. 
    2. I've Actived Anti-Virus and Always Updated. 
    3. In Safe Mode Everything Was Fine, I Can run Notepad, Task Manager, Command Prompt, etc (except : Msiexec / .msi Installer). 
    4. I tried System Restore in Safe Mode, but I don't have any Restore Points. In Normal Mode, I can't execute System Restore.
    So, How can I solve this Problem?
    Body text cannot contain images or links until we are able to verify your account -__-"

    Hi,
    According to your description, it seems like a program which start with Windows blocked the access of these app.
    To open Msconfig, you can boot into Safe Mode firstly, then open Msconfig and following clean boot process to execute the operation.
    If there is any progress, please feel free let me know.
    Roger Lu
    TechNet Community Support

  • Oracle9i Forms - Can't Run form

    I am trying out the new Oracle9i Forms (Release 2 - part of iDS 9.2.0) on a test machine running on Oracle9i Release 2 (9.2.0) database. I did not install the Oracle9i Application Server since the documentation says that you can run forms for testing purposes without AS. After I compiled a form, It tried running a form but got error "FRM-10142 - HTTP listner not running on port 8888... " The HTTP server is running as part of the Oracle9i Database and listens to port 7778 for HTTP and 4443 for https. Is there a configuration file or parameter that I need to change?
    Thanks,
    T.J.

    Jacob/Robin:
    Thanks for your help....starting the OC4J containers did the trick! I was able to see the form within a web brower using the default port 8888. I am going to stick to this configuration until I upgrade my server since the new Oracle9i Application Server requires a lot of power (not to mention takes alot of resources!).
    Thanks again for your help!
    T.J.

  • Adobe Reader can't run in Windows 7

    After Windows 7 Home Premium updatedto servive pack 1
    Adobe reader can't run~
    I try different version of Adobe reader all can't run neither Adobe reader X nor Adobe reader 9.4~
    This is the extract from Windows log:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2011-03-09T15:12:07.000000000Z
    EventRecordID
    51668
    Channel
    Application
    Computer
    User-PC
    Security
    EventData
    AcroRd32.exe
    10.0.1.434
    4d456f48
    kswebshield.dll_unloaded
    0.0.0.0
    4b9b71f3
    c0000005
    001d3db0
    dbc
    01cbde6c58f28f2f
    C:\Program Files  (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
    kswebshield.dll
    987d1878-4a5f-11e0-897b-0025646882e8
    Hope that someone can help me~
    Thanks

    I am having the exact same problem.  But it seems rare since no one has responded to this post.  A web search turns up a number sketchy website claiming that kswebshield.dll is some sort of malware, but there are no results when you search for it on McAfee.com - no results.  But Malwarebytes.org has a couple results, neither of them are helpful.
    Updated 15 June 2011
    OK.... Here's what I found.  An answer to this post describes the solution (http://www.precisesecurity.com/qa/?p=1829) (scroll down to see the answer).  Since Kingsoft appears to be a legitimate company they should be working adobe to figure out why their software conflicts with Adobe Reader (and who know's which other Adobe products).
    None of the following products identified Kingsoft as a problem; McAfee, Malware Bytes and Spybot Search & Destroy.
    To elaborate on the instructions in the email, I did the following:
    1. Disabled the KingSoft service. 
    2. Backed up my Registry
    3. Deleted the following folders and registry keys:
    C:\ProgramData\kingsoft
    C:\ProgramData\WDD
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\Kingsoft Antivirus WebShield Service
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\services\Kingsoft Antivirus WebShield Service
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Kingsoft Antivirus WebShield Service
    * I was unable to use the "Delete With Wiping" feature in Windows 7 x64, even after reboot.  But, when I Shift+Deleted the files they successfully dissappeared.  I'm going to download BCwipe and wipe the slack space on my machine just to be safe.
    4.  Finally, successfully, launched Adobe Reader.
    Message was edited by: HeyStu

  • Mysql 5.6.20 workbench can't run on windows 10 technical preview enterprise after installation !

    Hi there
    thanks for create a such beautiful and nice os windows 
    Although I need my charms bar and I can't reach it because my screen is not touchable 
    but I love it like as other ms windows 
    I have a problem 
    I installed win 10 preview enterprise
    installed webmatrix and try to install mysql 5.6 manually because webmatrix install mysql 5.1 by default 
    so after I installed mysql full version with workbench on this OS it installed successfully but now It couldn't run on user root
    even it can't know the root user 
    in windows installation there was a problem , while we install other MS windows we must enter the name for OS but in this version OS name is selected by default 
    I think this problem cause to other problem for example now I can't change the windows update option and the update just install auto 
    help me to fix mysql and run it please
    thanks 
    regards :
    Raha

    Hi Raha.
    Try to install the Visual C++ Redistributable Packages for Visual Studio 2013.
    Here is the link:
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=40784
    regards
    Jorge

  • How can i run java windows(class) app. from studio creator

    Hi experts,
    I want to run windows application(which write with java and compile javac, i have got *.class) from studio creator.
    For example;
    import java.awt.*;
    import java.awt.event.*;
    public class IlkPencere implements WindowListener,ActionListener
    public Frame p1;
    public Button btnIkinciPencere;
    public Button btnKapat;
    public int X;
    public int Y;
    public void PencereAyarla(String baslik,int genislik,int yukseklik,int konumX, int konumY,Color
    arkaPlanrengi)
    X=konumX;
    Y=konumY;
    p1=new Frame(baslik);
    p1.setLocation(konumX,konumY);
    p1.setBackground(arkaPlanrengi);
    p1.setSize(genislik,yukseklik);
    p1.setLayout(new FlowLayout());
    p1.addWindowListener(this);
    btnIkinciPencere= new Button("Ikinci Pencere");
    btnKapat=new Button("Kapat");
    p1.add(btnIkinciPencere);
    p1.add(btnKapat);
    btnKapat.addActionListener(this);
    btnIkinciPencere.addActionListener(this);
    p1.setVisible(true);
    public static void main(String args[])
    IlkPencere p=new IlkPencere();
    p.PencereAyarla("ANA PENCERE",250,100,0,0,Color.white);
    public void actionPerformed(ActionEvent e)
    if(e.getSource()==btnKapat)
    p1.setVisible(false);
    else if(e.getSource()==btnIkinciPencere)
    IlkPencere p=new IlkPencere();
    X=X+50;
    Y=Y+50;
    p.PencereAyarla("ANA PENCERE",100,100,X,Y,Color.red);
    public void windowClosing(WindowEvent e)
    System.exit(0);
    public void windowOpened(WindowEvent e)
    public void windowClosed(WindowEvent e)
    public void windowIconified(WindowEvent e)
    public void windowDeiconified(WindowEvent e)
    public void windowActivated(WindowEvent e)
    public void windowDeactivated(WindowEvent e)
    I am using java server. I want this ; Any client can run my project(create with studio creator) with explorer after click any button after this class run application windows(but this windows application must run on server)
    I don't want to install any program in client PC. Client PC which have got only explorer, may be use this application.
    Thanks,

    or can i hidden explorer tools and address bar. User must use only my application menu.
    How can i solve it.

  • Running 10g forms in browser without any windows

    Hi,
    Is it possible to run the forms in the browser directly without any windows? I want the items in the canvas to be displayed on the browser (IE) without using windows. We are using Forms 10g release 2.
    Our application is a MDI application.
    Note: I've searched the related threads. There were some suggestions for setting the value of useSDI. The threads were quite old. So, I thought anything new might have come up...
    Regards
    -Ruban Santhakumar

    Look for a File Formsweb.cfg in you forms directory. Look for entry "SeprateFrame" in this file and set it's value to false. This will open your forms in the IE, not in a window. Update, if this helps you......
    Message was edited by:
    [email protected]

Maybe you are looking for