10gdatabase migration from windows xp to windows 2003

Hi
We have cloned the oracle from windows xp and restored it on windows 2003
after restoration we face some issue ,we are getting following error
sqlplus '/nolog'
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Jun 10 12:34:26 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Note: hostname is same as source instance
directories are also same
Regards,
Pradeep madhavan

Pradeep,
It would be better to open a new thread in the SQLPLUS forum -
PL/SQL
This forum is for connection problems to non-Oracle databases. That forum has more experience with Oracle to Oracle connection problems.
Regards,
Mike

Similar Messages

OS Migration from Windows 2003 cluster to Windows 2008 R2 MSCS

We want to go for windows 2008 R2 server ( 64-Bit) MSCS by migrating from windows 2003 Cluster ( 32- Bit) . We are running on ECC 6.0 and oracle 10.2.0.2 DB.
Is it possible ?
Is it traditional System copy if so how to migrate the cluster ?
Regards

> 2. If the oracle version is 10.2.0.2 then does it will support Windows 2008 R2.
You need at least 10.2.0.4 (you need to install that version with a separate DVD, you can't install with the normal Oracle DVD (10.2.0.1). See
Note 1303262 - Oracle on Windows Server 2008
Be aware of the fact that the normal standard support for 10.2.x is ending at end of july (you'll have to pay an extra maintenance fee if you continue to run that version) - see
Note 1110995 - Extended maintenance for Oracle Version 10.2
So if you now do a system copy to new hardware with a new os anyway, I would upgrade to 11.2.
Markus

MDT 2012 to Migrate from Windows 2003 32 Bit to Windows 2012 R2 64 Bit

I have used MDT for so long however only for client OS upgrade - XP to Windows 7/8.
We wish to use MDT to migrate from Windows 2003 32 Bit to Windows 2012 R2 64 Bit. All servers are virtual on HyperV or VMWare - plan is to use USMT hardlink Migration.
Is this supported? Has anyone used this for server migration?
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"

Thanks Keith for your reply.
Even is USMT does not work, we are ok. SMIGdeploy will be helpful.
Basically, want MDT to run some scripts on the Windows 2003 server, post which install Windows 2012 and join it to the existing domain with the same computer name.
Then hydration kit to help with the installation of features etc. Also, we would like to take a complete backup to a WIM before migrating.
I am sure this is workable.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"

Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

Hello all,
I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012. They have purchased ThinApp 5.0.4.5 so that is what we will be using.
We have created a clean 2003 VM and did a pre-scan
We loaded the application and configured it and then did a capture.
We then tested the capture the 2003 VM and it works
We then loaded the capture on a Clean 2003 VM and it works
We then loaded onto a 2012 VM and when running the app from a command window get an error -missing import shell32.dll:StrCpyNW
If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name - NTDLL.DLL error
I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet. (Taking training next week).
Until then, is there any suggestions which I can try?
Thanks for your time in advance,
Vince

Tried and done that. The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in" I think the code mentions 1.31. or similar.
We downloaded the java plug in and installed it. No progress.
We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents..
We have tried in very different ways. We connected the printer to another domain SBS server 2003 and it works beautifully. So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
and still no go..
We have tried four different accounts and nothing. Same results as stated originally.
Any other suggestions??
JFM

R12 Cloning from Windows 2003 64 bit to Windows 2008 R2 64 bit

Dear Gurus,
I have a 12.1.3 applications and 11.2.0.2 database running on Windows 2003 *64 bit*. Now I need to perform a migration from Windows 2003 to Windows 2008 R2 64 bit. Please confirm if we can directly perform a clone from 2003 64 bit to 2008 R2 64 bit using Rapid clone?
Thanks in advance!
-Khan

We are in Windows 2003 32bit on Applications and Windows 2003 64 bit for database. This architecture was certified as per Support which we had confirmed via SR.Correct.
BTW the reason for raising this thread is that the clone failed for db Tier at a very first go with the below error where it states unknown OS Windows 2008 R2.
E:\TEST\oracle\11.2.0\appsutil\clone\bin\..\jre\bin\java.exe -Xmx600M -cp E:\TES
T\oracle\11.2.0\appsutil\clone\jlib\java;E:\TEST\oracle\11.2.0\appsutil\clone\jl
ib\xmlparserv2.jar;E:\TEST\oracle\11.2.0\appsutil\clone\jlib\ojdbc5.jar oracle.a
pps.ad.context.CloneContext -e E:\TEST\oracle\11.2.0\appsutil\clone\bin\..\conte
xt\db\CTXORIG.xml -validate -pairsfile C:\Users\APDF38~1.ADM\AppData\Local\Temp\
2\adpairsfile_2800.lst -stage E:\TEST\oracle\11.2.0\appsutil\clone 2> C:\Users\
APDF38~1.ADM\AppData\Local\Temp\2\adcfgclone_2800.err && echo %ERRORLEVEL% > C:\
Users\APDF38~1.ADM\AppData\Local\Temp\2\adcfgclone_2800.res
RC-20011: Fatal: Failed to retrieve OS name. The following OS string returned fr
om System.getProperty("os.name") is unknown: Windows Server 2008 R2
Can't open Exception in thread "main" java.lang.ExceptionInInitializerError:
Invalid argumentPlease see these docs.
How to Overcome Windows 2008 Being Unrecognised by AutoConfig and rapid Clone? [ID 1270782.1]
Running adbldxml.pl On Windows 2008 R2 Dbtier Fails On Unknown: Windows Vista [ID 1263136.1]
Thanks,
Hussein

Inplace and side by side upgrade from windows 2003 64 bit R2 contains SSRS 2008 R2 to windows 2008 64 bit R2

Hello All,
   Case 1 -In place upgrade
   I would like to do in place upgrade from windows 2003 64 bit R2 that contains SSRS 2008 to windows 2008 R2 64 bit. The upgrade would be happened at OS level not at SSRS level.
   I would like to know what are the necessary steps should be taken prior/during/post upgrade from SSRS end as we can not rollback if there is some issue with in place upgrade.
Case 2-Side by side upgrade
I would like to do side by side migration from windows 2003 32 bit that contains SSRS 2008 to windows 2008 R2 64 bit. The side by side would be happened at both OS level and SSRS level.
  I would like to know what are the necessary steps should be taken prior/during/post side by side migration from SSRS end.

Before doing anything Take backups .
In case of reporting services..
Back up your symmetric key. For more information.
Back up your report server databases and configuration files. For more information.
Back up any customizations to existing Reporting Services virtual directories in IIS.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Thanks,
Shashikant

Performance analysis after migrating from windows to linux.

Hi Friends,
We are on RHEL 5 , EBS 11.5.10.2 , and recently migrated from windows 2003 server to RHEL5. i have couple of questions rendering in my mind .
1.How can i estimate EBS performance difference from Windows to RHEL5?
2. any querys or scripts to analyse the responce time for Forms and DB?
Please help me out if you have any scripts or links to the above scenario.
Thanks in Advance.
Raghu

Hi Raghu;
We are on RHEL 5 , EBS 11.5.10.2 , and recently migrated from windows 2003 server to RHEL5. i have couple of questions rendering in my mind .
1.How can i estimate EBS performance difference from Windows to RHEL5?Please check :
A Primer on Migrating Oracle Applications to a New Platform
http://blogs.oracle.com/stevenChan/
2. any querys or scripts to analyse the responce time for Forms and DB?Please check:
General EBS Discussion
Hope it helps
Regard
Helios

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?

Hi,
How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?
Db Version: 10.2.0.2
Thanks,
Yusuf

Also see MOS Doc 403522.1 (How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows)
HTH
Srini

Restore Exchange 2007 SP3 to Windows 2008 R2 from Windows 2003

Perhaps I'm being dense, but I had Exchange 2007 SP3 installed on a Windows 2003 Server, and I've used "setup /mode:recoverserver" to restore it to a Windows 2008 R2 server... how do I restore the databases which I backed up with the Windows backup tool
on 2003?
I installed KB974674, the restore tool onto the 2008 R2 server but when I try and restore the backup it comes up with "this feature is no longer supported". Something I'm missing here?

These things marked as answers are not answers.
I have now thoroughly tested using setup /mode:recoverserver and it works fine going from Windows 2003 to Windows 2008 R2 with Exchange 2007 SP3, done several installations now without a problem.
"Setup /m:RecoverServer cannot be used across operating systems. A server that was originally running Windows Server 2003 can be recovered only on Windows Server 2003, and a server that was originally running Windows Server 2008 can
be recovered only on Windows Server 2008."
This appears to be wrong, unless someone can tell me why it's right (I haven't tried moving Unified Messaging yet). I've done it to 2008 R2 several times now and also in the other direction, from 2008 R2 to 2003, I can't find anything that didn't work
afterward, although I haven't really thoroughly tested OWA yet, I admit (but it does appear to be working).
I think that documentation is out-of-date as it doesn't mention R2 plus I think it was written before SP3 came out and that paragraph is just wrong.
Basically how I do it is like this:
Dismount databases from the 2003 server and copy the storage group folders to a network location or removable media.
Install the Windows 2008 R2 server using the same machine account that was being used by the 2003 server. Install the prerequisites needed for Exchange 2007 SP3 installation on 2008 R2 (note in addition to the IIS components and RPC over HTTP this
also requires the AD tools in RSAT, which I haven't found mentioned in technical documentation). Install the relevant windows updates.
Install Exchange 2007 SP3 using setup /mode:recoverserver Install the update rollup.
Copy the storage groups into the relevant folders on the new server and mount them. Migrate any relevant certificates (e.g. for ActiveSync).
Obviously then check it all over with the diagnostic tools and check it with EXBPA. The backups are obviously totally different, but really I think you should be using DPM anyway.
To me that was pretty easy to do, to be honest. About 1.5 on a scale of one to ten. Basically install it, recover it, copy over some files and mount them.
Seriously on a halfway decent server I've done it in under an hour.

Upgrade Multiple servers from windows 2003 to 2008

Hi All,
How could i upgrade all my servers (1000 around) from Windows 2003 to Windows 2008 R2 without loosing system settings, profiles and applications.
Your speedy reply is highly appreciated.

Since Windows Server 2008 R2 only supports 64-bit the first thing to check is that all of your 2003 boxes are running 64-bit Windows. If they are then an in-place upgrade is possible, but if they're running 32-bit Windows then there is no way to directly
upgrade them. Your only option with 32-bit Windows 2003 is to either upgrade to 2008 (which does support 32-bit), or migrate everything to a new server.
Other than that, the question then becomes what are those servers running. If they're running Microsoft services then it should be fairly straight forward, but if they're running 3rd party services then you need to check with the 3rd party company whether
their software (or more specifically the version of their software you currently have installed) supports 2008 R2.
For the Windows services there are some differences, but I believe the upgrade process handles the transition for you for the most part. Have a look at
http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx which details the process, and goes into the changes for each of the main Windows Server roles, and those things
you need to be aware of. As mentioned in that article, when you start the upgrade process you're offered a link to a compatibility report which will tell you if there's anything on the server which will break or cause issues with the upgrade. View that report
and review what it tells you before you start the upgrade. You may find that some tools, addons etc need to be uninstalled or upgraded before you can start the actual upgrade, but if the report gives you the green light you should be fine to continue without
any issues.
Finally, from the wording of your question I'm guessing you're wondering about getting the servers upgraded at the same time? Personally I'm not aware of any way to do that, but even if one did exist I wouldn't do it. There's too much of a chance that something
will go wrong, probably in some small minor way, but if you've just tried to upgrade all the servers at the same time, when you get reports telling you that something is no longer working you'll have a much harder time working out what caused it than if you
know that only servers a, b and c have been upgraded today, so the issue is likely to be with one of those.

Migrating to Windows 2003

Hello all,
I'm seeking for expert advice on the migration issue. We are
looking to Migrate from Windows 2000 to Windows 2003, and we are
running ColdFusion MX 7.0.1, enterprise edition, does anybody see
any issues with that, or is it going to be a smooth transition !
Thanks,
Jyoti.

You dont need the nwclient or edir installed on the windows 2003 server for
an mta/poa to function? (ive never done groupwise server components on
windows before but I am in need of doing so currently).
http://abeNd.org - Novell News for IT Professionals
"Gregg A. Hinchman" <[email protected]> wrote in message
news:[email protected]. .
> Pretty straight forward. Shut down the domain MTA, make sure no file
> locks
> on db's, copy the domain directory over to the windows disk -make sure NOT
> to have it run on c:\ -then just install the windows agents and point the
> MTA config file to the domain directory -and you are done.
> --
>
> Take Care.
>
> Gregg A. Hinchman
> Consultant
> [email protected] ( mailto:[email protected] )
>
> A Novell Consulting Partner
> 317.329.0288 Office
> 413.254.2819 eFax
>
> "Courage is doing what is right."
>
> "Do not be bound to any doctrine, theory or ideology, even Buddhist ones.
> All systems of thought are guiding means, not absolute truth." Thich Nhat
> Hanh, Vietnamese monk.
>
>
>
>>>> On 5/21/2007 at 12:03 PM, in message
> <4pj4i.4281$[email protected]>,
> Shabu<[email protected]> wrote:
>> Hi,
>> We have a Primary GroupWise domain server that runs MTA and also
>> secondary
>> domain server that runs MTA and POA. We are planning to migrate our
>> Primary domain server to a Windows 2003 server. What lists of things we
>> need to be aware off when we do Primary domain migration to a Windows
>> 2003
>> Advanced server?

R12 Migration from Windows to Linux

Hi all,
I am involved in migrating R12.1 with 11gR1 from windows 2003 to Linux 5U8. I referred the following documents,
Using Transportable Database to migrate EBusiness Suite R12 Using Oracle Database 10gR2 or 11g (Doc ID 734763.1)
Application Tier Platform Migration with Oracle EBusiness Suite Release 12 (Doc ID 438086.1)
Kindly give your inputs on the following sections for better understanding.
1. How much space is required to use Transportable Database - CONVERT DATABASE command, for example if my database size is 80GB
Is there any method to estimate space required for the conversion?
2. a. Regarding new digital signature in Application Tier Platform Migration...
If we want a new digital signature in the target machine, what are the steps need to be followed?
2. b. What is pairsfile, Otherthan migration, where it is used?
Regards,
Krish

Hi Hussein,
in the middle tier migration, we have 2 steps mentioned in the note given above. I did not do this type of middle tier migration before,
please can you describe the below steps.
Generate and upload the manifest of customer-specific files what information it will extract from the system ?????
Download and apply the customer-specific update with AutoPatch what oracle people are going to do the the information provided above and what does that patch do????
copy the APPL_TOP and some directory of COMMON_TOP to target systemsince source system is on WINDOWS NTFS file system, and we are going to copy these files to Linux File system (ext3 or ext2 what ever it may be).
does it make any issues, since file systems are different????

DHCP WINDOWS 2012 FROM WINDOWS 2003

Hello
I have to migrate DHCP from Windows 2003 Standard Edition to Windows 2012 Standard Edition and i have
one red cross in " Leases" . I try two methods : by GUI and CMD ( Backup/Restore and Import/Export cmd) but
i have not solved. Any help ?
Thanks and Regards
MCITP

Hi,
Could you have a more detailed explaination or upload us a screenshot regarding the red cross in "leases"?
In addition, please check the below thread to see if helps:
DHCP Leases with a Red Cross and Event Log Errors
http://social.technet.microsoft.com/Forums/windowsserver/en-US/aaaaddbe-a8f2-41e9-87ab-be76a46b1df3/dhcp-leases-with-a-red-cross-and-event-log-errors
Best regards
Michael
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Migration from Windows 32 bit to 64 bit Customized reports PDF output issue

Hi Gurus,
Product Version: 12.1.1
Operating System: Linux x86-64
Database Version: 11.1.0.7
We have migrated from Windows 32 bit to Linux 64 bit, our PDF reports shows some Greek Charters
vi /opt/oracle/apps/tech_st/10.1.2/bin/reports.sh
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
SELECT * FROM NLS_DATABASE_PARAMETERS
NLS_CHARACTERSET=AR8MSWIN1256
Regards,

Mean the result of query SELECT * FROM NLS_DATABASE_PARAMETERS
NLS_CHARACTERSET=AR8MSWIN1256
and 11g database character set is AR8MSWIN1256
vi /opt/oracle/apps/tech_st/10.1.2/bin/reports.sh' refers to 10g. Oracle EBS R12 oracle home not a DB Oracle HOME
Hope you understand now.

10gdatabase migration from windows xp to windows 2003

Similar Messages

Maybe you are looking for