Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

Hello all,
I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012.  They have purchased ThinApp 5.0.4.5 so that is what we will be using.
We have created a clean 2003 VM and did a pre-scan
We loaded the application and configured it  and then did a capture.
We then tested the capture the 2003 VM and it works
We then loaded the capture on a Clean 2003 VM and it works
We then loaded onto a 2012 VM and when running the app from a command window get an error  -missing import shell32.dll:StrCpyNW
If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name  - NTDLL.DLL error
I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet.  (Taking training next week).
Until then, is there any suggestions which I can try?
Thanks for your time in advance,
Vince 

Tried and done that.  The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in"  I think the code mentions 1.31. or similar.
 We downloaded the java plug in and installed it.  No progress. 
We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents.. 
We have tried in very different ways.  We connected the printer to another domain SBS server 2003 and it works beautifully.  So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
and still no go..
We have tried four different accounts and nothing.  Same results as stated originally.
Any other suggestions??
JFM

Similar Messages

  • Migrating from DHCP 2003 to DHCP 2012

    Hi,
    i'm planning to migrate from DHCP 2003 to DHCP 2012 or DHCP 2012 R2 failover.
    Saw those instructions:
    extract the configuration in .TXT
    netsh dhcp server export c:\temp\dhcp.txt all
    copy this file on your server 2012 in temp or elsewhere
    import the configuration with this command
    netsh dhcp server import c:\temp\dhcp.txt all
    if you have the error "TLS supported but not configured"
    remove all the option in "Server Option" like 003 Router 006 DNS SERVERS and put it back after doing the import 
    now i have some questions:
    1. is it recommended to build 2 2012 DHCP configured as failover on virtual machines ? (hyper-V)
    2. do those dhcp servers have to or recommended to be DNS also or can they be only DHCP servers ?
    3. my AD functionality level is 2003 - is it a problem for this migration ?
    4. virtual or physical ? whats is recommended ?
    5. any other considerations ?
    TNX

    Hi,
    Virtual or physical will both work. It doesn't matter, as long as the two servers can communicate with each other.
    You do not need DNS installed on the same server, but you can install it without hurting anything.
    I believe that the AD level has no effect because you can have DHCP failover even on workgroup computers.
    -Greg
    http://technet.microsoft.com/en-us/library/dn338983.aspx#specs

  • Migrating from Server 2003 to Server 2012 Essentials or new install?

    We have a small network having downsized some years ago. Currently we have two 2003 servers  and 6 workstations. Originally we were running Exchange on one of the servers, but now Exchange is remotely hosted. I have a new server that will be
    running Essentials. I want to replace both of the old servers and just have the one new server. I am thinking that with such a small network, it will be easier just setting up the new server in a new domain rather than migrating. Does this make sense? Any
    pitfalls to be aware of?
    Thanks,
    Mike

    Hi Mike,
    à
    I am thinking that with such a small network, it will be easier just setting up the new server in a new domain rather than migrating.
    Does this make sense?
    Based on your description, setting up the new server or performing a migration, will depend on the target which
    you want to achieve.
    For migration, it will help you to migrate the settings and data from that old server to the new server. For
    more details, please refer to following article and check if can help you.
    Migrating
    to Windows Server 2012 Essentials
    If just set up the new server, as you mentioned, it may be easier than migrating. For more details, please refer
    to following article and check if can help you.
    Install Windows Server Essentials
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Best practice for client migration from SMS 2003 to SCCM 2012 R2?

    Can anyone advise what the most recommended method is for migrating SMS 2003 clients (Windows 7) to SCCM 2012 R2?
    Options are:
    1. SMS package to deploy ccmclean.exe to uninstall SMS 2003 client. Deploy SCCM 2012 R2 client via SCCM console push.
    2. Simply push SCCM client from console installing over existing SMS 2003 client.
    I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
    3. Use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean and then install the SCCM client.
    Appreciate any feedback. Thank you.

    Hi,
    >>I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
    I haven't seen any official document records the option 2 method. There is only upgrading from SCCM 2007 to SCCM 2012 directly.
    I think you could use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean.exe. Then use SCCM 2012 to discover these computers and push clients to them.
    Best Regards,
    Joyce

  • Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

    Hi. I work in an enterprise environment that is currently migrating to  64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working."  I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

    Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
    Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
    I'll ping some folks about the error you are getting. . .
    hth,
    Ben

  • OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

    I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.  
    Everything works perfectly previously on 10.8.4 and 10.8.5.  I did not test on 10.9.0 as I went straight to 10.9.1.  Anyone else having this problem?  Any thoughts on resolution?

    OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
    However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
    Hope this helps if anyone has a similar issue

  • Are there any issues with using OS X Mavericks and Premiere CC?

    Are there any issues with using OS X Mavericks and Premiere CC?

    Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Peter Garaway
    Adobe
    Premiere Pro

  • Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

    Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
    "Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

    Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
    Any other ideas?
    EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
    I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

  • Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.

    Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.  I'm on Mavericks 10.9.5.

    one obstacle, quickly removed. thank you.
    nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
    i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

  • I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    adamboettiger wrote:
    Sophos and MacKeeper
    There are many reported problems with both these programs.
    Run through this list of fixes in order, will tune you right up.
    They are in order for a reason.
    ..Step by Step to fix your Mac

  • I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

    I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
    I mostly enter the original items on my laptop
    There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

    This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

  • Issue with Visibility Settings for Backgrounds and Layers

    I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
    When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
    Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
    I was wondering if anyone else has run into this and has a solution, or has any recommendations.
    Thanks in advance.

    Hi setrev2012,
    How are you adding the backgroud?
    The only way I can think to accomplish this is via a watermark.
    The basics...
    Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
    Select a jpg or PDF of your background and adjust scaling options as desired.
    Then click the Appearance Options.. and uncheck the Show When Printing option.
    In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
    If you want a solid color background, just create a flat image of the background color for use as the watermark.
    If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
    Regards,
    Rave

  • Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365

    Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
    Im thinking
    BPA for AD (health check)
    Add the Server2012R2 as a DC
    Ensure replication
    Move DHCP
    Change DNS
    Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option  as I have 28 users and the essentials service would make everything quite nice for remote access and backups
    etc....  however I don't know whether to just use dirsync with password replication instead ?
    Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
    instead to sync up to azure ?
    Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
    However I have read when migrating to 365 was using exchange 2010 there was a application
    to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
    along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
    cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
    then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
    I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
    http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserver

    Hi,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    à
    Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
    and sync'ing people to the cloud?
    I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
    then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
    Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
    Regarding to migrate Exchange to Office 365, please refer to following articles.
    Migrate
    All Mailboxes to the Cloud with a Cutover Exchange Migration
    Step-By-Step:
    Migrating from Exchange 2007 to Office 365
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Meanwhile, there is an additional article that you can refer to:
    Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
    If anything I misunderstand, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Upgrade Call Manager from 8.5(1) to 10.5(1) and migrate from MCS to UCS...

    We are upgrading UCM from 8.5(1) to 10.5(1) and migrating from MCS to UCS. We used UCM 8.5 OVA (7500 user) and migrated to UCS.
    Once migrated to UCS we upgraded UCM to 10.5(1). We wanted to use OVA to accommodate 10,000 users, hence took backup of 10.5(1) cluster and installed new servers with new 10.5(1) OVA (10,000 users).
    While doing DRS restore, system we were not able to perform a restore. It seems UCM is not recognizing the XML file. It is strange as we took the back from UCM 10.5(1) and trying to restore same version, only difference is upgrade was done with 7500 user OVA and we are now trying to install 10,000 user OVA.
    Has anyone run into similar issue? any help will be great.
    Thank You.

    This thread is 5 months old but doesn't seem resolved...
    I ran into this same scenario last week. Was using the same SFTP server for backups and restores during migration from 7.1(5) to 10.5 and during final rebuild/restore of the "to-be" production 10.5 Publisher, the DRS server was unresponsive and blamed the Master Agent or SFTP server. I had restarted Master and Local agent repeatedly, and regenerated ipsec certs to no avail.
    TAC suggested I try a different SFTP server (which I already had, with the same files), and try deleting the .xml files that were included with the backup (drfComponent.xml and processhost.xml). I installed TitanFTP, per TAC's recommendation, deleted the processhost.xml file, regenerated the ipsec certificate one last time, restarted DRF Master, and then DRF Agent, and was able to start a DRS Restore.
    Try the above process if you're still having issues.

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • ACS4 installation and migration from ACS3

    Question: Has anyone installed ASC4 and migrate from ACS3? Any problems, concerns?
    The installation of ASC4 would happen on the same server as the current ASC3 correct?
    Since you will need to restart the JBOSS etc for configuration changes. This means that ASCS3 could suffer some downtime?

    See,
    to read how we performed the upgrade and see some issues:
    http://www.oracle.com/technology/products/forms/index.html
    http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
    http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
    Good Luck!!

Maybe you are looking for