10gr2 and 11gr2
Hi,
I can to install both the version of Oracle DB 10GR2 and 11GR2 ?
Thank You
Gaetano
883279 wrote:
Hi every one..
I have very few knowledge on linux.
I have downloaded the two linux_11gR2_database_1of2 and linux_11gR2_database_2of2, and I have followed so many forums installation process
but somewhere my linux is getting crashed, each time I am deleting the vmware linux installed and re installing that...
Please let me know the steps as I am a biginner to install this.
Thanks in advance ....
:)Pl do not hijack another post as it is considered to be rude - pl create a new thread for your issue.
In order to get the help that you need, it is best to provide as much specific info as you can. What you have essentially stated is - "Help ! My car won't go ! How can I make my car go ?".
The more specific details you provide, the better the quality of the responses
HTH
Srini
Similar Messages
-
Differences between oracle 10gr2 and 11gr2 warehouse bulider
Hi All,
Could you please let me know the main differences between Oracle 10gr2 and Oracle 11gR2 warehouse builder.
Also , it would be great if anyone point me to the document where i can see the major differences.
Thanks,
Naveen.Hi Naveen,
The major difference between OWB10gR2 and 11gR2 is the target RDBMS.
In 10gR2 you have to use ORACLE as your target RDBMS (unless you are going for DB Gateways, that is a complete different story).
Where as in 11gR2 allows you to use any RDBMS as your target system . This is achieved by Code-Template mapping.
All is needed is that proper jdbc driver for the target system.
Also 11gR2 supports OBIEE RPD creation and etc.
http://blogs.oracle.com/warehousebuilder/2009/09/oracle_warehouse_builder_11gr2.html
http://www.rittmanmead.com/2009/09/a-look-at-the-new-features-in-owb11gr2/
http://www.oracle.com/technetwork/developer-tools/warehouse/owb-11gr2-new-features-summary-129693.pdf
Thanks,
Sutirtha -
OWB 10gR2 and 11gR2 integrate which with oracle database versions
I request a clear definite reply as I need to suggest the client to upgrade their production databases. I did try searching on the oracle sites, but did not get any sure answer.
Question:
The client has databases on 8i, 9i & 10g. Will OWB 10gR2 support these data sources?
If not, either I will have to ask clients to upgrate 8i & 9i to oracle 10g or have them upgrade the same and also have them upgrade to OWB 11gR2.
So, please confirm support of database versions for both OWB 10gR2 & OWB 11gR2.
Thanks much!I already had the 'Release notes' link for both 10g and 11g which you provided.
The issue is when I launch the URL, I am taken to https://support.oracle.com/CSP/ui/flash.html.
Here I've to submit and register Sun Contract Number or Oracle Support Identifier. I don't have these details.
Isn't there a simple way to get the valid information on platform-specific requirements?
I mean this should be given easily on Oracle site.
Thanks much! -
Can we have separate 10gR2 RAC CRS and 11gR2 RAC CRS homes on same Unix s
We'd like to test the upgrade of our 10gR2 RAC databases to 11gR2 RAC.
We have six databases on the same server and want to install a separate 11g RAC stack (11g CRS, 11g ASM, 11g RDBMS) and upgrade each 10g database from 10g RAC stack on same server (10g CRS, 10g ASM, 10g RDBMS) . Is it ok to have 10g CRS home and 11g CRS home same server? If not, how best to upgrade without buying more hardware?
Thanks in advance,
LouIn more detail, the main issue/question is whether there can be 2 Oracle CRS homes on the same server i.e. separate 10gR2 and 11gR2 CRS homes residing on the same server for the purposes of (gradually) upgrading all Oracle RDBMS homes from 10g RAC to 11g RAC.
Can there be? What would be the implications for the OCR and voting disk? In our case 10g CRS has OCR and Voting Disk on raw devices. In 11gR2, these would need to be migrated/upgraded/stored in ASM, right?
We have 6 10g rdbms homes in addition to the one 10g CRS home and one 10g ASM home. To upgrade can we
- Install 11gR2 CRS in a separate home (this would now include ASM as well)
- Install 11gR2 RDBMS home
- Upgrade one of the 6 10g databases while leaving the others untouched as 10g databases in the separate 10g CRS, 10g ASM stack?
Any ideas, pointers greatly appreciated.
Thanks,
Lou -
R0 Rollback Segment in Import of 10gR2 into 11gR2 Database
I have a new install of Oracle Database Server Enterprise Edition 11.2.0.3.6 on AIX 7.1.
I used the DBCA to create two databases and used export datapump and import datapump to upgrade two 10gR2 database to 11gR2.
One of the import logs includes the following messages:
Processing object type DATABASE_EXPORT/ROLLBACK_SEGMENT
ORA-39083: Object type ROLLBACK_SEGMENT failed to create with error:
ORA-02221: invalid MAXEXTENTS storage option value
Failing sql is:
CREATE ROLLBACK SEGMENT "R0" TABLESPACE "SYSTEM" STORAGE(INITIAL 131072 NEXT 131072 MINEXTENTS 2 MAXEXTENTS 2147483645)
I verified that the source database has R0 with maxextents of 2147483645.
I can copy and modify the CREATE ROLLBACK statement and lower the value assigned to MAXEXTENTS, or use MAXEXTENTS UNLIMITED, then run the command in the target database.
In light of the fact that the DBCA did not create R0 in my two 11gR2 databases, I want to know if I still need to create R0 in the one that showed the error in the import log. Has anyone else noticed the disappearance of R0?
Here are the rollback segments that exist in the 11gR2 database at this time:
SQL> Select SEGMENT_NAME, OWNER, TABLESPACE_NAME, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, STATUS
from SYS.DBA_ROLLBACK_SEGS;
SEGMENT_NAME OWNER TABLESPACE_NAME INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS PCT_INCREASE STATUS
SYSTEM SYS SYSTEM 114688 57344 1 32765 ONLINE
_SYSSMU1_3638931391$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU2_3033359625$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU3_2670780772$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU4_286801445$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU5_1738828719$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU6_3548494004$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU7_700714424$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU8_2755301871$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU9_2087597455$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
_SYSSMU10_3267518184$ PUBLIC UNDOTBS1 131072 65536 2 32765 ONLINE
11 rows selected.
Thanks,
BillSrini,
Both the 10gR2 and 11gR2 versions of the database are using automatic undo management.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> show parameter undo
NAME TYPE VALUE
_undo_autotune boolean TRUE
undo_management string AUTO
undo_retention integer 14400
undo_tablespace string UNDOTBS1
SQL>
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 14400
undo_tablespace string UNDOTBS1
SQL>
Do you know anything about Oracle no longer automatically creating R0 in 11gR2?
Thanks,
Bill -
EBS 11.5.10.2
Sue Linux 10 SP2
HRMS application
Database 10.2.0.4
I am planning on upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2.
I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
Thanks.I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
The doc says "Also apply patch 9835302" in addition to AutoConfig patches, so you need to apply both -- (Patch 9835302 and Patch 9535311).
Thanks,
Hussein -
hi
I am dong (just started few days back)10g OCP (DBA).
i love to play with it lot.so i installed 11gr2 db version first.then i deleted the db orcl using dbca.NOW i am trying to install RAC..if i install RAC and create a db or restore a db from taking backup backup from a 10gR2 single instance(actually my institute run this db) db using rman.what would be the case?
will this db use the all the fetures of RAC 11gR2 or it will be just a single instance db by default OR do i really need to run rconfig after restoring it?
what it would be if the backed up db not using ASM?
My assumption is the 11gR2 will fail to restore the 10gR2 db.OR my be some parameter need to be change in spfile.
plz suggest
regardsdamorgan wrote:
You can not create a RAC cluster with the hardware you likely have.
Describe in detail hardware, operating system (w/ version), shared storage solution (and sharing the C drive in not an acceptable answer, and cache fusion interconnect solution.For RAC i have x86_64 two machines running with OEL5.4 /OEL5.2 ( and planned for using ASM).
>
For someone just learning Oracle I would recommend that you not even think about RAC for 2-3 years. You jumping into RAC is roughly equivalent to a student pilot deciding they want to fly the Space Shuttle. It isn't going to have an attractive outcome.do not get scares i am trying at my home.
First of all i would like to say:
............can you describe the thing theoretically?
in my case the incorporation is from win xp 32 (my institute runs by win xp 32bit )to oel 5.4 x86_64.that is the db of which i am taking backup is running under win xp and 10gR2 NOW i am restoring it under 11gR2 which is running under OEL5.4.
what will be the case?is it possible or not?
[as per i can remember the OCA stuff if i took the control /datafile/spfile file os level backup(ie.just copy-paste method ) and just try to restore it manually it may work--probably one of my friend did so(if my memory saves) ]
Another thing is that do i need to change something in spfile?if i can remember my OCA stuff well ,the Spfile probably stores some version information of the database release.so it should be changed or not?
regards
NB:- Actually i asked to my OCP instructor.he said it is not possible even from single instance backup and restoration if it is the case from 10gR2 to 11gR2 using rman.I just want a experts suggestions.... -
Going from 10gR2 to 11gR2 - any obvious performance 'pitfalls'?
Hi, there,
I'm moving some databases from 10gR2 to 11gR2. I was wondering whether there were any obvious pitfalls in performance that I should be aware of (like the optimizer ones in previous versions). I'm taking the SPFILE from 10gR2 and modifying it as little as possible to use as my 11gR2's SPFILE.
Also, I've heard murmurs of timezones being an issue in migrating to 11gR2? I'm either going to be using export/import or TTS to move my data. I wonder if the timezone issue is related to RMAN somehow.
MarkHi,
I performed an Upgrade from 10.2.0.4.4 to 11.2.0.1 two weeks ago.
I used a note from oracle support for manual upgrade to 11gR2
the database had database vault and also had auditing enabled.
these peculiarities are all covered in the note.
I would suggest that if you have auditing enabled, set the parameter audit_trail=none before you commence upgrade.
In addition make sure the you have tested the upgrade before implementing on your production environment, this would prepare you greatly.
after the upgrade, the timezone was upgraded to 11, database vault was turned on, EM upgraded, database vault application redeployed.
all the best
samuelk
Edited by: Samuel K on Feb 24, 2011 3:13 PM
Edited by: Samuel K on Feb 24, 2011 3:14 PM
Edited by: Samuel K on Feb 24, 2011 3:15 PM -
Using Oracle SE RAC 10gR2 or 11gR2 on NetApp NAS
Hi,
I'd like to know if Oracle certifies Oracle SE RAC 10gR2 or 11gR2 on NAS storage like NetApp FAS2552A dual controller, 24 x 900 GB SAS, 8x 10GbE + 4x 1GbE, 7-
mode, iSCSI, CIFS, NFS, FCP.
I have read some documents by Oracle and, in my opinion, it seems that the best approach is: NetApp NAS with iSCSI.
Reading NetApp documentation it seems that NetApp NAS has a proprietary protocol to manage storage (ONTAP ?).
Is the NetApp approach to manage storage for Oracle RAC a certified solution ?
Thank you very muchI run Oracle RAC on NetApp without any problems. I suggest you work with NetApp. They will be able to answer questions about their specific hardware. They also have documentation on how to configure their disk solution specifically for Oracle RAC databases.
HTH,
Brian -
Differences between Oracle Real Application Cluster 11gR1 and 11gR2
Hi Experts,
Please provide me differences between Oracle RAC 11gR1 and 11gR2.
Thanks in Advance,
Jeeshan.Hi,
You can also refer below Oracle notes :
11gR2 Clusterware and Grid Home - What You Need to Know (Doc ID 1053147.1)
Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2 (Doc ID 1189783.1)
Regards,
Neha -
API differences between 11gR1 and 11gR2
Can anyone tell me if there are any api differences between oim 11gR1 and 11gR2 specifically. Also can we still use API's from oim 9.x in 11gR2.
ThanksI think for lookup we can use tcLookupOperationsIntf API. You can refer old and new alternatives list here:
http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/apis.htm#BCFDDFAI
Though this list doesn't have tcLookupOperationsIntf.
regards,
GP -
Differences between 11gr1 and 11gr2
Please can i be furnish with the differences between 11gr1 and 11gr2?
Thank you.New Features Guide
http://docs.oracle.com/cd/E11882_01/server.112/e22487/toc.htm -
11gR2 Grid Infrastructure and 11gR2 RAC install as separate users (RH 5)
We are about to set up a few new RH 5 clusters and are trying to make a decision if we should install 11gR2 Grid Infrastructure and 11gR2 RAC as the same user (oracle) or as separate users (grid and oracle) as per Oracle documentation.
I would like to know what other people are doing and their experiences with this.
Here are some concerns that we have:
1) Does Oracle support has an 11gR2 cluster environment where grid infrastructure and oracle database are installed as separate users ? I have been to a few Oracle 11gR2 demos and they always have a simple install where everything is installed as a single user.
2) Potential permission issues that we might hit iif we use separate users, for example
- grid control agent - which user do we install it as and will it be able to access both grid and oracle files ?
- database listener will run as grid user. Is this going to cause any permission issues ?
Thanks in advance for your answersIt is all dependent on your business whether your business needs to separate between privileged user for storage administrator (ASM) or database level. It is recommended to have user separation but not mandatory.
see http://download.oracle.com/docs/cd/E11882_01/install.112/e17212/toc.htm for the details
permission issues might happen if the configuration is not correct. for example you might see ORA-12537 when configuring the system
Hope this helps -
SWITCHOVER_STATUS value are different for Oracle 11gR1 and 11gR2
Hi All,
I would like to know why is there a difference in the SQL output when run on a 11gR1 and 11gR2 Primary database in a DataGuard configuration.
On a 11gR1 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
Sessions Active
Now, when I do the same on a 11gR2 Primary database here is the result
On a 11gR2 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
To Standby
Is this a bug in 11gR2 ? Is there a patch/fix available ?
Oracle 11gR2 version 11.2.0.1.0
TIA,
SudhirHello Loic,
The result on the Standby Database is "Not Allowed". This is because there is no alternative Standby Available.
I have some scripts which does the switchover based on the Database status. As per Oracle 11gR2 DataGuard Admin docs.
Cut pasted for Oracle DataGuard Admin docs.
Step 1 Verify that the primary database can be switched to the standby role.
SQL> SELECT SWITCHOVER_STATUS FROM V$DATABASE;
SWITCHOVER_STATUS
TO STANDBY
1 row selected
Note: The WITH SESSION SHUTDOWN clause can be omitted from
the switchover statement if the query performed in the previous step
returned a value of TO STANDBY.
When I use SQL statement "ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY;" and if there are Active SQL sessions then I get the error
ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY *
ORA-01093: ALTER DATABASE CLOSE only permitted with no sessions connected
Thanks,
Sudhir -
Memory Management comparison between Database 9208 and 11gR2 on Sun Solaris
Hi All,
Need some case studies which would help understand how Memory management is done in 9208 and 11gR2 on Sun Solaris SPARC
Also wanted some real time data which says 11gR2 manages Memory and CPU better than 9208. Some comparison Graph between 9i and 11gR2.
Any information will be of great help.
Thanks everyone for your support.
Thanks
Abdulplease see if below helps :
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr1_workshop2.pdf
http://www.dba-oracle.com/oracle11g/oracle_11g_memory_target_parameter.htm
Regards
Rajesh
Maybe you are looking for
-
Quicktime working for some but not for others
Hello all, I'm developing this website and it displays videos in quicktime format, but it's just not working for some people... It just won't play for some reason I just don't know 'cause I couldn't make the error happen to me and got no good help fr
-
Dear All, At my Project Consumption is calculated as per Status and Notes Taken,i,e if it is "OK" reading MR is taken Directly for Consumption Periodically and Billed, but according to Logic if Customer MR Status and Notes is DL and AB(Door Lock and
-
Looking for a good tutorial or book for 3D composite
Hi, I do editing for 3D animation at work (simple kind) and working along with 2 other 3D modelers. We recently came down to the conclusion that we need to composite to be able to render our animation. However, none of us really know how to do 3D com
-
File.exists() returns false even when the file exists
hi, the exists() function of java.io.File function returns false even when the file exists on the file system. why is this? i checked the path of the file which gives me the correct path, but exists returns false. can anyone help?
-
hi i was wondering if i connect wireless to my multifunction printer through time capsule can i use scanning functionality i printed and it worked fine but when i used windows vista built in scanning, or the software with the printer they didn't dete