11.5 Select Area for Section Bug

I have found what I think is a bug in 11.5 P03. I have tried this same process under 11.3 and do not experience the problem. When using the "Area Tool" or "Section Area for Section" to select a portion of a Section, the size that is selected is not the size of the newly created Section.
Here are the steps I followed with the results:
1. Start with an 8.5" x 11" Section that has margins of .250" on all sides
2. Use the Area Tool to choose an area and set the following property values:
Action = Create Section
Name = example
Check In = unchecked
Keep Objects = checked
Horizontal = 0.000 Inches
Vertical = 0.000 Inches
Width = 8.500 Inches
Height = 1.200 Inches
3. Press OK and open the new EXAMPLE FAP
4. The size SHOULD be Width = 8.5" and Height = 1.2"
However, the new Section size is the dimensions PLUS the margins. Width = 9.100" and Height = 1.7"
5. The objects are aligned according to the new Section size and cannot be easily realigned when the section is resized because 11.5 no longer offers a Align By Page that leaves objects relative to each other. (Possibly another bug.)
Any suggestions on a way to make the above steps work as expected or is this is a bug?

Hi,
It appears that both issues you raise are product issues. Please enter an SR and post the SR number here so that I can link it to some internal discovery already completed.
Thanks,
-DA

Similar Messages

  • Can't select area for pasting

    Hi
    Have reinstalled version 4.6. Although the select area turns to blue despite left clicking on it then going to the web page I cannot select anything and nothing appears in the clip book. I am running windows xp and version 8 of explorer.
    Any help before I ditch this programme would be appreciated
    Thxs
    Chris

    Dave,
    Greetings!
    For DAQmx, you should be able to setup all of your channel settings for the SCXI-1531 by creating a DAQmx Task. Previously, in Traditional DAQ, this was done by selecting Properties.
    Hope this helps,
    Anuj D.

  • Defining the 'selection area' around a button

    hi there,
    I'm making an interactive pdf from InDesign - buttons linking to other pages within the document.
    All fine so far - but when I make the pdf, the selection area (i.e. the area around the button that triggers the rollover effect) is too large - and as there are a lot of buttons close together it's easy to select 2 by mistake.
    I can edit the selection area (for want of a better description) boxes in Acrobat but wonder if there is a way to specify it in InDesign?
    thanks
    Sue

    thanks Steve.
    I seem to be  having trouble even achieving that now - when I use the handles of the bounding box in Acrobat (tools > interactive objects > select object) to try to resize it, it seems to move the graphic too. Is there anything obvious I'm doing wrong?
    many thanks again. Sue

  • BUG: Disabling 'Select All | Select None' for af:tableSelectMany

    I have a simple af:table that incorporates an af:tableSelectMany. Within the af:tableSelectMany I have the disabled property bound to my view's backing bean like this disabled="#{myBackingBean.selectManyDisabled}". The backing bean then returns true or false based on whether the user should be able to change the selection in the table.
    When the disabled property is set to true, the table's "select" column is displayed appropriately. The checkboxes are grayed out and the user cannot change their state by clicking on them. However, the Select All and Select None links are still shown at the top of the table and still are active. Clicking one of these links changes the selection state for this items in the table. Shouldn't these links be disabled too? Has anyone else found a reasonable solution to this bug?
    Thanks,
    Jim

    Unfortunately that does not fit my usecase.
    The Select column always needs to be shown because the selection state of an entry in the table represents that entry's inclusion or exclusion within a higher level object. It is important to show the user this information. There are just some cases when we do not want to allow the user to change this information. (Specifically when showing historical data).
    I did consider not rendering the af:tableSelectMany as shown in that sample, but then I would have to build my own "Select" column that would be rendered whenerever the af:tableSelectMany was not rendered. In my own column I would have to place disabled check boxes to mimic the display.
    At this point I have developed a work-around solution. In the af:table that contains this af:tableSelectMany component I have the selectionState property bound to my backing bean as well as having the selectionListener bound. When I receive the SelectionEvent notification, I rebuild the selectionState RowKeySet to remove any effect of the Select All or Select None. The result is that the check boxes simply "blink" but always remain as they should be. It's a hack, but it works.
    It would be much better if the Select All and Select None links were not displayed or were disabled. I really feel this is a bug since disabling the af:tableSelectMany does properly draw the checkboxes in a disabled state. They just forgot to deal with the two links.
    Jim

  • I live in Hong Kong, but I am from Seattle WA. When i look for ibooks or itunes my selections are extremely limited. Is this because I'm in a different country?

    I live in Hong Kong, but I am from Seattle WA. When i look for ibooks or itunes my selections are extremely limited. Is this because I'm in a different country?

    For instance; it seems on the net I see that many Tom Clancy books are availbe on ibooks, but i can not just look them up on my phone. along with many other authors. in the Category section, when trying to browse, many of the categories do not contain any authors or titles at all. this goes for many "i" apps.

  • When I updated to the new version for the IPhone and selected ICloud for backup location, my Notes have disappeared and you are no longer on my Desktop either.  Where did they go?

    When I installed iOS5 on my IPhone4 and selected ICloud for my storage location, all my Notes disappeared off my IPhone & Desktop.  Where are they?

    There must be a big pile of notes somewhere cause the same thing happened to me. If you find them let me know.

  • When I Apply Redaction to the selected area the area is redacted, however the rest of the doc becomes unreadable. Is there a fix for this?

    FYI - I am using Acrobat X Pro v 10.1.13
    If I convert a MS Word Document to a PDF file the Redaction works fine without affecting the rest of the document.
    The problem I am describing below only seems to happen on documents that have been scanned to PDF from my Lanier Copier/Printer/Scanner/Fax machine MP C3502.  I purchased the Adobe PDF software for the machine so that I could scan from the machine directly to my computers. The scan arrives onto both of my computers, no problem. I can open them and print them with no problems. Both Computers have Acrobat Pro X software on them.
    Here is what I do:
    1. I receive an Invoice in the mail
    2. I scan it at 600dpi from my Lanier machine to my computers
    3. I open the scanned PDF doc on my computer
    4.I select Save As and give the doc a name
    5. I open the Tools and go to Protection
    6. I select Mark for Redaction
    7. I select the area I want Redacted
    8. I Apply Redaction
    9. I answer, Yes to the pop up window asking me if I want to Apply the Redaction
    10. Another pop up window confirms the Redaction is successful
    11. At this point I can see that the Redaction had occurred however the rest of the document appears washed out and I cannot read any other information on the document.  Thing such as bar codes or header in color all seem to be fine but all the type is washed out and unreadable.  I normally use Black for my redaction color however I have tried using other colors and I get the same effect.
    When I first installed the Acrobat Pro X software a few years ago I never had any problems,  I recently began updating the Acrobat software a few months ago and now I have this problem,
    I would appreciate any help.
    Thank you,
    BG10

    Thank you. I figured it out right before I heard from you.  Running the OCR before the redaction made it work correctly.
    Thank you so much for taking the time to answer my question.
    Make it a great day.
    BG10

  • When using a numbers spreadsheet, how do I select a specific area for printing?

    When using a numbers spreadsheet, how do I select a specific area for printing?

    Also this would be a question for the Numbers app fourm.  Not the iMac hardware fourm.

  • After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    Try to reset the iPod by  pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.

  • OIM11g R2 - If two roles (ACF2 and AD) are selected together for a user req

    Hi ,
    We are facing a problem In the Catalog, if two roles (ACF2 and AD) are selected together for a user and checking it out.The request goes to approval process.We have not created any approval process flow.
    Plz let me know how to recover from it and provide an option to provision two roles simulaneously to a user without going into approval process.
    Steps to Reproduce:
    1. Create a user in OIM .
    2. Search that user.Administration->Users->Search User
    3. Click on 'Roles' tab and select 'Request Role' under that tab.
    4.'Catalog' tab opens .Click on Search icon and Add AD and ACF2 Role to the cart.
    5. Click on 'Check out'
    6. Click on Submit button
    7. Request Summary tab opens with Request status shown as 'Obtaining Request Approval' and Request Type as 'Assign Roles'.
    Note: If we assign AD and ACF2 individually to user and running Evaluate User Policies we are able to see account in Provisioned state under Accounts tab of User and request is not going to approval process
    Thanks in advance

    Hi,
    As mentioned I created two auto approval policies
    1. Request Type= Assign Roles
    Level= Request Level
    Auto Approval checked
    Approval Rule=Requester.UserLogin Equals XELSYSADM
    (Created this rule as i am logeed in as XELSYSADM)
    2. Request Type= Assign Roles
    Level= Operation Level
    Auto Approval checked
    All Scope Checked
    Approval Rule=Request.RequestType Equals Assign Roles
    After that i opened the user request role page and requested 2 roles (AD and ACF2).
    But now also request went to approval work flow
    Please point which step i have missed or any other step need to be performed.
    Regards,
    Edited by: Puneet Lobana on Jan 7, 2013 12:54 AM

  • Selecting screen area for training simulation

    Hello all,
    I want to create a software training simulation where a user
    needs to select a certain area of screen and then click a button. I
    can show them how this is done, but can not find how to have them
    do this as part of training simulation. There does not seem to be
    anything in Captivate that can allow the user to do this part.
    If this can not be done natively in Captivate, I would
    appreciate your ideas for a work around...
    I thought of one as...
    Instruct user that at the stage you would be selecting a
    certain area of the screen and then go on to show them how to
    select the area - ask them to just click the required button and
    carry on with the rest of the training.
    Thanks

    The selected area shows up with a marquee like marching ants,
    however, they are not marching -just static (the selected area is
    not high-lighted) - then user indicates their choice by clicking an
    OK button.
    In the normal use of the software the user selects a certain
    portion of text that needs to be extracted - I would like to keep
    the simulation training as close ot reality as possible.

  • Post revaluation to selected depreciation area for an asset

    Hi,
    We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
    We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
    However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
    +Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
    Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.+
    Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
    Thank you,
    Karol
    Edited by: Karol on Oct 6, 2011 9:54 AM

    Hi Blaz,
    Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
    Thank you,
    Karol

  • Using (Select All) for report parameter

    Hi there,
    I am Looking for assistance in making the the (Select All) option work for a particular report. The parameter is for product families (which there are about 47 unique results for). The report is also influenced by two other parameters, one being a date type
    i.e 'MTD' 'YTD' 'MAT'. When a long date type such as MAT is selected, selecting all families causes the report to get stuck in an endless loop.
    I've tried creating my own <Select All'> item in the parameter dataset, then I have the opposite issue, the <Select All> selection works perfectly but when I try and tick two or more product families I recieve the following error:
    "An expressions of non-boolean type specified in a context where a condition is expected, near ',' "
    Parameter Dataset:
    SELECT '<Select All>' AS family_description, '<Select All>' AS family_code
    UNION ALL
    SELECT DISTINCT family_description, family_code
    FROM dim_item AS item
    ORDER BY family_description
    Snippet From Main Report Dataset:
    Where
    sales.oe_branch_code IN (@Branch)
    And
    sales.order_status <> 'X' and sales.line_status <> 'X'
    AND (item.family_code IN (@Family) OR @Family = '<Select All>')
    Any help is appreciated
    Thanks Kindly
    SQL Novice

    Hi KCBA,
    I have check the query you have provided the issue cause by the query "
    AND (item.family_code
    IN (@Family)
    OR @Family =
    '<Select All>')" you are using which is incorrect.
    If the parameter @Family have set as "Allow multiple values" then you don't need to add new label "Select All" for the multiple value parameter already have this section, if the parameter @Family is not the multiple values
    parameter and you want to select all the values or just select one, you can modify the query as below which will works fine:
    "AND (item.family_code =
    (@Family) OR
    @Family = '<Select All>'
    If you are using the stored procedure and have issue about add multiple value parameter in the where clause, you are take reference to below similar case about how to create an function to make it work:
    Passing multi-value parameter in stored procedure ssrs
    If I have some misunderstanding, please try to provide more details information about the relationship of all the parameters (Cascading or not ), current result  you have got and expect result you want(Snapshot).
    Any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Is there a way to select multiple track sections from different tracks and join them to make the chorus on iPhone?

    I am currently using the iPhone to record my vocals on top of professional beats, or riddims as they are called in the dancehall world. Is there a way for me to select multipe voice sections from different tracks, copy them and then paste them later in the project. I don't want to record the chorus more than once. Normally what I do is sync the project to my wife MacBook Air and then from there edit it but I would like to avoid this. Also, I use the earpods microphone to record my voice and of course it doesn't come out professional quality but it is decent. Do you recommend a microphone that plugs to the iPhone or should I get an interface? Thanks for the help.

    You can either copy and paste single regions or duplicate sections, if you want to copy regions
    from different tracks in parallel. 
    See: Extend a song with song sections
    Adjust the length of your sections in a way, that the regions you want to copy from different tracks are together in a section of your song.
    Add a copy of a section:
    Open the song section controls, choose the section you want to copy, then tap Duplicate.The copy is added after the last section.
    Tap Done to close the song section controls.
    After copying the section, move the new section to the end of the song:
    Change the order of sections:
    Open the song section controls, then tap Edit.
    Drag a section up or down in the list by the handle on its right edge.
    When you are finished, tap Done.
    Tap Done to close the song section controls.
    Regards
    Léonie

  • Is it possible to change values in pagination select list for a report?

    The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
    Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
    APEX version 3.0
    Thanks

    Figured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.

Maybe you are looking for