Is there a way to select multiple track sections from different tracks and join them to make the chorus on iPhone?

I am currently using the iPhone to record my vocals on top of professional beats, or riddims as they are called in the dancehall world. Is there a way for me to select multipe voice sections from different tracks, copy them and then paste them later in the project. I don't want to record the chorus more than once. Normally what I do is sync the project to my wife MacBook Air and then from there edit it but I would like to avoid this. Also, I use the earpods microphone to record my voice and of course it doesn't come out professional quality but it is decent. Do you recommend a microphone that plugs to the iPhone or should I get an interface? Thanks for the help.

You can either copy and paste single regions or duplicate sections, if you want to copy regions
from different tracks in parallel.
See: Extend a song with song sections
Adjust the length of your sections in a way, that the regions you want to copy from different tracks are together in a section of your song.
Add a copy of a section:
Open the song section controls, choose the section you want to copy, then tap Duplicate.The copy is added after the last section.
Tap Done to close the song section controls.
After copying the section, move the new section to the end of the song:
Change the order of sections:
Open the song section controls, then tap Edit.
Drag a section up or down in the list by the handle on its right edge.
When you are finished, tap Done.
Tap Done to close the song section controls.
Regards
Léonie

Similar Messages

Is there any way to select multiple variables on a block diagram and change them all to read or write?

Doing one variable at a time can be tedious. It's hard to believe there wouldn't be a solution for this.

I agree with tbd that there is rarelynever a reason for ton's of local variables.
Even if you feel you need many, it does not take much time to configure each right after creation and I see little use to globally change many from read to write or vice versa at a later point. An overuse of Local variable tend to make code hard to read and can easily cause race conditions. For one perspective have a look at some older discussions, e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=112401#M112401.
To make a new local variable, I typically ctrl+drag an existing one (read or write as needed) and "right-click..select item" to assign the desired control/indicator.
LabVIEW Champion . Do more with less code and in less time .

Is there any way i can receive a text from one number and reply to another on the same conversation?

I have a friend who has 2 phone numbers, he sends texts from one and i have to reply to the other one.
Is there any way i can configure the SMS conversation so: it receives texts from his 1st number and when i reply it goes to the 2nd number?
Thank you

I don't think it is possible to do what your friend is asking.
He would need to call his phone carrier.

Is there a way to select multiple files and initiate the Capitalize function?

I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
Good luck...

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT

Is there a way to move multiple Calendar items from one date to another?

Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
There doesn't seem to be any "Select All" feature available.
Is there a way to move multiple Calendar items from one date to another?
Thanks in advance!

Still no ideas? Apple, please come up with a fix. Thanks.

HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

Is there a way to select every other page in a pdf and convert it to grayscale?

I'm going to ask this question in a few sub-forums, so if you think you've seen it, you might have. Someone suggested it might be done with Javascript. I know nothing about Javascript.
Where I work I use a program that can print to pdf. We use it to produce mailings, usually postcards, that are addressed.
I often end up with a 500 page document that will print on 250 sheets of cover stock, which will get cut into 1,000 postcard, all pre-addressed and sorted by zip code.
Usually, the address side is all black and the front is color. The printers we use can print a black click on the address side and a color click on the other, IF the pdf is set up that way. Otherwise, both sides will be counted as color clicks.
I know I can select pages individually in a pdf and convert them to grayscale and those pages will be counted by the printer as black clicks, which are cheaper than color clicks.
The problem is, I have not figured out how to convert all the odd numbered pages to grayscale at once. As a result, I usually end up printing the color side simplex, then putting the job back in the tray and printing the black side. Of course, that only works if only one side is personalized, sometimes both sides are.
Is there a way to select every other page in a pdf and convert it to grayscale?

The Acrobat SDK has sample code that shows how to convert the colors for one page (the first page of a document). This sample can easily be adjusted to process every other page. You can then use an Action that executes this JavaScript to process the document. Do you know how to create an Action? If so, you can use this script (as I said, adapted from the sample in the SDK) to convert all odd pages (1, 3, 5, ...):
// Get a color convert action
var toGray = this.getColorConvertAction();
// Set up the action for a conversion to RGB
toGray.matchAttributesAny = -1;
toGray.matchSpaceTypeAny = ~toGray.constants.spaceFlags.AlternateSpace;
toGray.matchIntent = toGray.constants.renderingIntents.Any;
toGray.convertProfile = "Gray Gamma 1.8";
toGray.convertIntent = toGray.constants.renderingIntents.Document;
toGray.embed = true;
toGray.preserveBlack = false;
toGray.useBlackPointCompensation = true;
toGray.action = toGray.constants.actions.Convert;
// Convert every other page
for (var i=0; i<this.numPages; i++) {
console.println("Processing page " + i);
if (i % 2 == 0) { // change to "if (i % 2 != 0) {" for all even numbers
console.println("in page " + i);
console.println(this.colorConvertPage(i, [toGray], []));
As I've indicated in the code, you can change this to all even numbers by changing the == to !=

Is there a way to select a word in a pdf form and have it circled

is there a way to select a word in a pdf form and have it circled instead of say check marked

https://discussions.apple.com/community/professional_applications/final_cut_stud io
Al

Is there a way to open form as if from different responsibility in R12

Is there a way to open form as if from different responsibility in R12. Have tried to call FND_GLOBAL.apps_initialize but it did not changed a thing.

*"Is there any way I can send her messages back and make it look as though my email address no longer exists? "*
"Message" menu --> Bounce

Is there NO way to select multiple songs to go into a Music Playlist at once, vs doing it one by one?!

Argh. So irritating how something that should be very simple and intuitive results in useless calls to Sprint (my carrier) and BB. with endless holds, transfers, pasing the buck,and still no results. Then I'm suggested to go to the Forums...you know...where other paying BB customers can try tp provide the IT support that BB apparetnly could care less to do for its paying customers?
Anyway, I want to have multiple playlists in my BB Music so that when I host parties, I can play a particular type of music by selecting one of the playlists. I was able to move songs to my BB but they only seem to move to the general Music Library (All Songs). I was able to create Playlists, but it seems you can only move songs to the Playlist ONE AT A TIME. There is apparently no way to select multiple songs to go to a playlist? No way to move an entire folder of music from my PC to my BB songs, as its own separate sub-folder (i.e., Playlist)?
I know I've been able to do this with other devices in the past.
Otherwise the BB Music Playlist options seems totally pointless.
Tx

It says: ''users can re-enable it from the Add-ons Manager if necessary''
*https://addons.mozilla.org/en-US/firefox/blocked/i106
*https://addons.mozilla.org/en-US/firefox/blocked/i107
<blockquote>Why was it blocked?<br />
The RealPlayer Browser Record extension is causing significant problems on Flash video sites like YouTube. This block automatically disables the add-on, but users can re-enable it from the Add-ons Manager if necessary.</blockquote>
You can try to delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons

Is there a way of getting all my songs from my iPod to my itunes, not just the purchased ones?

Basically, our computer crashed not long ago, and since then we have had all the stuff from our old computer taken and put on the admin of a our new computer. However, my music files seem to have disappeared, including the ones that were in Windows Media Player that were also on my iPod (a nano). I connected my iPod to iTunes after downloading it from the Apple website, but only the songs I have purchased from iTunes Store have been transfered to the iTunes library. Is there a way I can retrieve all the other non-Apple files from my iPod to the iTunes library, thus making it safe to sync them both without fear of losing more songs?
Thank you!!

We can't recommend a product, but we can point you to the direction of iLounge which they will know what currenty works to bring all your files off your iDevice back into iTunes.
I also have some recovery options and advice here:
Recovery options:
A: If Windows isn't booting:
You need to boot the computer from a "recovery disk or USB" that has a operating system on it and a graphical user interface to transfer files from your boot drive to a external drive.
I suggest using the Easy USB Installer to install Ubuntu 10.10 onto a 2-4 GB USB key.
http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
or
burn a ISO of Ubuntu 10.10 or PartedMagic to a cd-r with ImgBurn or Win 7 right click and burn
You can use Disk Utility in OS X to select the ISO and burn to cd/dvd as well.
Once you have it installed, consult this page for your BIOS boot key to hold to get into the BIOS.
http://pcsupport.about.com/od/fixtheproblem/a/biosaccess_pc.htm
Plug the USB into the back (if possible) of the computer, connect the external drive and enter the BIOS, set the USB (or CD) as first boot and SAVE.
Boot off the USB/CD and "Try Ubuntu/Run from disk" DON'T INSTALL. (Parted Magic loads into RAM and ejects CD)
Once in, go under the menu Places > Computer and transfer your files to the external drive just like you would in Windows, drag and drop.
(If using Parted Magic double click on the Mount Drive left icon twice, use the two GUI windows to transfer files to external drive, unmount drives, log out/quit in the lower left corner menu option)
B: If the computer hardware isn't working, but the drive might still work:
You'll have to remove the power cord and manually extract the hard drive. This might result in some damage.
There is a powered IDE/SATA to USB adapter for sale online for $20 that you can take that internal hard drive and use it like a external drive to access your files from another Windows machine.
C: If your iTunes content is deleted...
It might be recoverable if it hasn't been overwritten yet by fresh data. Undelete software works by reading the 1's and 0's of the files themselves, not what the OS says.
You need to use undelete software pre-installed before the iTunes content was deleted, or while on a bootable cd/USB and a external drive to transfer the recovered files.
You can also install undelete type software on a new machine and USE STEP B above to "undelete" the files and recover them directly to the new computer.
You can't install undelete software or recover files to the same drive your attempting to recover from or it overwrites the deleted data.
D: If the hard drive doesn't work and...
The data isn't worth spending $2000-$3000 in a ATTEMPT at platter dissection recovery, then your finished
If the data on the drive was encrypted, data recovery efforts may be futile, unless it's a encypted file and you transfer it successfuly and have the password to de-crypt it.
E: If you have a "iDevice" with any content
It can be synced back into iTunes, check at iLounge what third party software works reliably now and for your version.
Once you log into your iTunes account, you can sync ONLY iTunes purchased content back from a iDevice
Third party software can recover just about all the items on a iDevice, regardless of it's origin. (can't recommend such software here)
F: If any of the above is too hard, or the data is of "critical importance"
Then seek professional computer or forensic level recovery services.
Get help from someone who has done this sort of thing repeatly and can almost guaranty 100% results.
There is Linux software that can "rip" all data off a iOS device if that level of attention is needed, seek a professional service.
Hope this helps in your data recovery efforts.
Please, backup your data, it's the only thing us IT professionals can't recover.

Is there a way to delete all email messages from inbox without checking each one at a time on my iphone 4?

Whenever I want to delete messages in the inbox on my iphone 4, using v4.2.8, I have to manually check each one and then delete them the checked ones as a group. Is there a way to select all and delete them at one time? I love the phone and it is a little complaint, but I often get 50-60 work related messages which I scan then delete because the originals are on my work computer. Thanks.

paulcb wrote:
Also, the iPhone is not a standalone device and obviously doesn't have a full blown mail client... it's an adjunct to your computer. If you want to delete a lot of emails, do it on your computer. You could also log into your webmail using a browser on your iPhone and do it from there.
You have a point, but you're just helping exposing the misery a little more: I actually DO delete the emails in WebMail, very easily. The problem is the sorry state of the Apple email client, that does not replicate those actions on the device, so I have to delete the messages TWICE--once on my computer, with a couple of clicks, and then on my iPhone, with a couple (hundreds) finger gestures.
As to your point that the iPhone is not a standalone device: that's nonsense. The iPhone does a lot of things that users thought IMPOSSIBLE just 10 years ago. Are you saying that the addition of a simple feature like a "Delete All Messages" button is too much for a mobile device? Then what to say about Siri, a complex-beyond-our-imagination system that incorporates voice recognition, AI, searching and other hard-to-grasp technologies, all at our fingertips?

Is there any way to prevent my SSIS Tasks from reformatting themselves when I want to change the Name

So all my tasks are nicely laid out in my SSIS Package. Now I want to go add a blurb to the Name to make it a little more descriptive. When I do that, Microsoft Visual Studio just automatically re-sizes the task so the entire description, name fits. When
I make it the right size, my scripting name is wrapping and that's the way I want it to look within my Package. Is there any way to stop Microsoft Visual Studio from automagically adjusting the size of my task when I click on the Name to edit?
Thanks for your review and am hopeful for a reply.

There is no way. The designer canvas received improvements in SSIS ver 2012, but this specific aspect remain unchanged.
What I do I simply use the Format -> Autolayout -> Diagram or you can also/instead Ctrl-A to select all and choose "make same size"
Arthur
MyBlog
Twitter

Is there a way to allow someone to play a keynote briefing and prevent them from copying, rewriting, or printing it?

Is there a way to allow someone to play a keynote briefing and prevent the user from copying, modifying, or printing it? The reason I ask this
is because I have created a lengthy keynote briefing book that has motion in it, and I don't want it copied, modified, or printed.

To lock a presentation : 1 Open the presentation you want to lock , and hold your pointer over the name of the presentation at the top of the Keynote application window. A triangle appears. 2 Click the triangle and choose Lock. To unlock a presentation for editing: Hold your pointer over the name of the presentation at the top of the application m window until the triangle appears, click the triangle, and then choose Unlock
Good luck

Is there a way to select multiple track sections from different tracks and join them to make the chorus on iPhone?

Similar Messages

Maybe you are looking for