11g R2 installation on Centos 5 in virtual box

linux_11gR2_database_1of2.zip
linux_11gR2_database_2of2.zip
I do have listing as above. I looked the following given by another member where he was asble to solve the problem - but I don't understand how he got these without extension zip and I get component of both the directories in the same folder - how I can separate the components - I just did not understand the following processes:
chmod -R 777 linux_11gR2_database_1of2
chmod -R 777 linux_11gR2_database_2of2
then copy the content of Components folder from linux_11gR2_database_2of2 to the Components folder of linux_11gR2_database_1of2 (That is copying all the folders and file from Components to Components)
chmod -R 777 linux_11gR2_database_1of2""

Hi;
linux_11gR2_database_1of2.zip
linux_11gR2_database_2of2.zipIf you want to unzip those file follow those steps:
1. Create one folder
mkdir mysetup
2. Unzip file
unzip linux_11gR2_database_1of2.zip -d mysetup
unzip linux_11gR2_database_2of2.zip -d mysetup
Please notice you try to make installation on not certfied platform. Please see:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/pre_install.htm#CIHFICFD
2.3.1 Operating System Requirements
The following operating system versions (or later) are required for Oracle Database 11g Release 2 (11.2):
On Linux x86
Asianux Server 3 SP2
Oracle Linux 4 Update 7
Oracle Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
On Linux x86-64
Asianux Server 3 SP2
Oracle Linux 4 Update 7
Oracle Linux 5 Update 2
Oracle Linux 5 Update 5 (only if using Oracle Unbreakable Enterprise Kernel)
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 5 Update 5 (only if using Oracle Unbreakable Enterprise Kernel)
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
On IBM: Linux on System z
Red Hat Enterprise Linux 4 Update 8
Red Hat Enterprise Linux 5 Update 4
SUSE Linux Enterprise Server 10 SP3
SUSE Linux Enterprise Server 11 SP1
Regard
Helios

Similar Messages

Installation as guest OS on Virtual Box

Hi,
I have downloaded Oracle Enterprise Linux and am trying to use the same as guest OS in Virtual Box on Windows Vista. While I managed to complete the installation successfully, I am not able to use it. When I power on the virtual machine and enter my username and password, it only displays a blank screen and nothing happens.
Can you help me out with this please ?

frits hoogland wrote:
As advised previously, run system-config-display. Another way to modify the screen resolution is to modify it directly in the X settings. But please try system-config-display.Thanks for your reply. I tried modifying the display resolutions from "System->Preference->Screen Resolution", but the only options available there are "800x600" and "640x320". Incidently, when checked in "System->Administration->Display" window, the video card is shown as "Unknow Video Card". Selecting any of the video cards from "Configure..." button does not help either.
I am not used to Linux and hence am trying to do things using GUI interface. Please let me know if I have to use text mode to do something that can not be achieved in GUI mode.

Oracle 11g 2 installation blocked

Hello, I'm installing the 11g release 2 Oracle version under a CentOS 6.3 virtual image, which is running on a CentOS 6.4 physical server.
I've followed the steps about previous requirements showed in the "Quick installation guide", so I think that the environment was correct before I started the installation (hardware requirements, packages installed, groups and users created...)
I tried installation twice, and it stopped at the same point both times:
- Progress: 60%
- Status: Copying files
"Copying files for 'Oracle Notification Service 11.2.0.0.0'
There is 34G free space in the home folder, and 12G free space in the /tmp, so I have no clue where the problem could be... Any help/idea??
Thanks in advance

Make the following checks:
1. Permissions in whole directory structure $ORACLE_HOME.
If necessary run the following command:
find / oracle-type d | xargs chmod 775
If it is a RAC check on both nodes.
2. Check LIMITS in /etc/security/limits.conf
3. Check if /tmp is full
4. Make sure the sysctl.conf this parameterized correctly.

OIM 11g R2 installation Issue. OIM Schema creation failed using RCU 11.1.2

I have been trying to install OIM 11g R2 on a Windows server 2008 R2 64 Bit and have been encountering the following error during the OIM schema creation. The other schemas, such as Metadata, SOA, user messaging services and other associated schema creation was successful. But, the OIM schema creation was taking more than 2 minutes and finally it fails with the below error.
RCU-6130: Action failed
RCU-6135: Error while trying to execute java action.
Components used:
OS: Windows Server 2008 R2 64 Bit
DBS: 11gR2 (11.2.0.1)
RCU: 11.1.2
The first error occured was ora-12637 packet receive failed followed by Table or View does not exist. I could not fetch much information from the oim and rcu.log.
I have set the processes, open_cursors and session_cached_cursors as suggested in the preinstallation step of OIM 11g R2 installation.
Any pointers on this will be highly appreciated.
Thanks,
Srini

Copy the msvcr71.dll file from rcuHome\jdk\jre\bin inside rcu installer and paste it in C:\Windows\SysWOW64.
Try running the rcu again with the new user i.e. instead of DEV_OIM, run it with DEV_OIM1.
Or drop the DEV_OIM user first and then use the same user.

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Oracle RAC 11g R2 installation complete installation guide

Hi,
Please suggest any oracle docs for Oracle RAC 11g R2 installation complete installation.
I am in process for installating Oracle RAC 11g r2 first time in my life this weekend.please help.

Hi Praveen,
Tim Hall has a perfect guide for installing Oracle RAC, you can review all the articles here:
http://www.oracle-base.com/articles/11g/articles-11g.php#db11g_release_2_installations
Consider also getting familiar with Real Application Clusters, because installing is only the very top of the solution and knowledge of how it works is a must:
http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_real_application_clusters
Regards,
Sve

Can we do oracle 11g software installation in parallel to SAP upgrade

Hi Basis Expert,
I need your inputs for one of this query
The query is. Can we do oracle 11g software installation in parallel to SAP upgrade when the system is in Downtime phase.
The idea is running SAP upgrade and in parallel running oracle 11g software installation. So that we can reduced the time.
Please share your valuable inputs.
Regards,
Anil Shenoy.

yes, of course.
using different environment during the installation of the new engine, you could install the new oracle home 11 also tomorrow (including the SBP).
infact, before the ./RUNINSTALLER you have to set the environment
setenv ORACLE_HOME /oracle/SID/112_64
setenv ORACLE_HOME_SRC /oracle/SID/102_64
setenv ORACLE_HOME_TGT /oracle/SID/11202
setenv LIBPATH $ORACLE_HOME/lib:$LIBPATH
setenv PATH /oracle/SID/112_64/bin: $PATH

ORACLE 11g win64 installation on Windows 7

Hello,
Could anyone help me in knowing whether the ORACLE 11G win64 is the right version to install on Windows 7?

Hello,
I need help with the installation of ORACLE 11g for installation on Windows 7 Win64. After I was almost finished with the installation, I got an error message saying that the following application (see below) can't be found in the folder:
C:\Oracle\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
Does anyone know where to find this file? I am a student starting my class next week and trying to have everything ready before.
Thanks so much for any help.
Edited by: 855887 on May 1, 2011 3:55 PM

Oracle 11g Server Installation and Configuration

Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank you

Hi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Oracle 11g XE - Installation Error

I am trying to install oracle xe 11g on my Win XP. The installation goes thru well. But when we start the database it starts too. However If I want to login it wont allow.
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
This should have been like below
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs\spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.
Can someone tell me what is wrong with this beta version of the Oracle 11g XE installation.
Lastly get started link also is not working too!!!
Thanks much in advance,
SB

user10958841 wrote:
I am trying to install oracle xe 11g on my Win XP. What "kind" of XP; SP? Edition? 32- or 64-bit?
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.In that case,
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on On Apr 27 00:01:01 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 598437888 bytes
Fixed Size                  1385180 bytes
Variable Size             268438820 bytes
Database Buffers          322961408 bytes
Redo Buffers                5652480 bytes
Database mounted.
Database opened.
SQL>
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';That forward slash is likely not causing any problem.
{code}
SQL> create spfile='?\dbs/spfile_justatest_fw_slash' FROM pfile='?\config\scripts\init.ora';
File created.
{code}
(sqlplus replaces ? with path of Oracle home.)
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.You need to re-install.
Lastly get started link also is not working too!!!See other threads in this forum on the similar subject (e.g. use Search Forum with keywords +get +started).
Edited by: orafad on Apr 27, 2011 12:20 AM
Edited by: orafad on Apr 27, 2011 12:32 AM

Is JDK need to install prior to 11g Binary installation

Hi All,
I am planning to install 11.2.0 on Suse Linux 10. Prior to the install i checked Preinstall validation using RDA, it says :-
Rule A00200: JDK Version
Description
This rule checks that the installed JDK version is JDK 5.0 update 6 or later. This is required for products like Oracle Java Database Connectivity and Oracle Call Interface drivers.
Unmatched Actions
JDK home is missing == Adequate
Default Action
Result: FAILED
Value: JDK home is missing
Return Value Action
JDK bin directory is missing Install full JDK package.
JDK compiler is missing Install full JDK package.
... not verified Cannot verify the version. Make sure JDK 1.5 update 6 or later is installed.
JDK home is missing Provide correct location for JDK home.
Need 1.5 update 6 or later Install JDK 1.5 update 6 or later Do I have to install JDK prior to 11g binary installation or oracle will take care this during the installation ?
Thanks in advance
Nishant

Hi
see this link
https://www.oratoolkit.ch/knowledge/howto/installation/se1Srv-11g-R2-on-SLES-11.0-x86_64.php?cookies=1

Oracle Portal 11g - New Installation

Hello,
I have worked a lot of with IAS 10.1.2.3. Now I want to install Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0). But I need the Portal for my old applications.
I have found the document 1364497.1 "New Direction for Oracle Fusion Middleware 11g with Single Sign-On 10g". In the document is a section "Oracle Portal 11g - New Installation" from 23-MAY-2012. This describe in Part 1 that I have to install the Infrasturcture of Oracle Identity Management 10g (10.1.4.0.1) . But I can't find the needed sources in the given donlaod path (http://www.oracle.com/technetwork/middleware/ias/downloads/101401-099957.html).
I found only Oracle Identity Management 10g (10.1.4.3). This version seems to me does not have an Infrasturcture.
I don't know which sources I have to download to install the temporary needed Infrasturcture. Can anybody help to find the right sources?
Thanks,
Frank

Hi Frank,
I'd prefer to get the document published first. Also a few comments with regards to the OAM installation path.
The benefits are :
<li>You will be using OAM straight from the beginning, no SSO in the picture
<li>You can install Oracle Portal with an 11g OID instead of a 10g OID (which you would get when installing IDM 10.1.4)
<li>You can use an 11.2 database for both the Portal and OID repository. With IDM 10.1.4 you are restricted to an 10.1 or 10.2 database as the installer does not support 11g.
There are some drawbacks as well :
<li>There will be no DAS solution (oiddas). Both User/Group creation should be done with different tools (ldif files, dbms_ldap API, provisioning from a 3rd party LDAP server) as well as User and Group LOVs in the access tabs of several Portal components won't work. You can still enter the name of the user and group in the input field to grant privileges
<li>The seeded login portlet does not work
Thanks,
EJ

Oracle 10g installation on linux using virtual box.

Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Please help me to solve this

user9362721 wrote:
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryHi.
This question was answered in this forum yesterday. And the day before. And the day before that. And ... (Or at least it feels like we get this every day, and sometimes several times a day.)
Search for 'xhost'

11g R2 installation on Centos 5 in virtual box

Similar Messages

Maybe you are looking for