11i Installation Issue in Linux

While running the rapidwiz i am facing the following problem
[oracle@vision rapidwiz]$ ./rapidwiz
Rapid Install Wizard is validating your file system......
>> The Rapidwiz will use /home/oracle/oraInventory
/home/oracle/oraInventory
/home/oracle/oraInventory
/home/oracle/oraInventory directory.
>> Creating this directory now and setting write permissions...
>> Please execute the script /tmp/oraInstRoot.sh as root to fix the above errors
But I could find the oraInstRoot.sh in the / tmp folder is empty..
How can I proceed in this scenario..?
Many thanks in advance...

Yes- all said above is correct.
However, if you are a little bit concerned about permissions and all that stuff later on - not that I know anything right now that may be an issue- I would rather change the permissions on /tmp folder to allow anyone and everyone do stuff with it.
i.e run the command 'chmod -R 777 /tmp' ( logging in as root though) to give all permissions to everyone.
That way I wont loose my head trying to figure out if files created as a result of running rapidwiz as root will give the appsmgr or oracleapps users the right priviledges when I decide to continue as such.
Just to mention, that I suspect the user installing the application was probably created but not given the right sets of persion to write to the /tmp folder, hence no oraInstRoot.sh file was created.
ark_505 - was the /home/oracle/oraInventory folder created ? ( sounds silly a question...but you never know what you learn from these kind of questions) and were there log files created there ? Also confirm if the oraInstRoot.sh file was not created in the /home/oracle folder.
All the best in the new year ahead

Similar Messages

Oracle EBS 11i Installation issues

Dear All,
I am trying to install Oracle EBS 11i on Redhat Enterprise Linux 4.5
[oracle@machine1 /]$ cd /Stage11i/startCD/Disk1/rapidwiz/
[oracle@machine1 rapidwiz]$ ./rapidwiz
Note: i have started the installation logged as user oracle which is member of groups oinstall and dba
the installatio starts without warning but suddenly installation aborted by giving the message check the log
/u01/oracle/proddb/9.2.0/appsutil/log/PROD-macnine1/021804050.log to see the errors
when i checked the specified log file ,some errors found here described below
runProcess_6
Statusstring Executing Command: adlnkoh.sh
adlnkoh.sh started at Mon Feb 18 18:32:18 UZT 2008
logfile located in /u01/oracle/proddb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command -
/u01/oracle/proddb/9.2.0/temp/PROD_machine1/adrun9i.sh APPS APPS
/u01/oracle/proddb/9.2.0/appsutil/install/adlnkoh.sh: line 198:
/u01/oracle/proddb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file
for details.
and when i check the log file /u01/oracle/proddb/9.2.0/install/make.log
many errors found like these
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
mv /u01/oracle/proddb/9.2.0/rdbms/lib/oracle
/u01/oracle/proddb/9.2.0/bin/oraclemv: cannot stat
`/u01/oracle/proddb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/oracle/proddb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
The user Oracle (by which installation is in progress) has all privileges on base directory /u01 (used for 11i install)
Here is the permissions for both directoried Stage11i and /u01
Code: Select all
drwxr-xr-x 7 root root 4096 Feb 15 13:03 Stage11i
drwxr-xr-x 3 oracle oinstall 4096 Feb 18 17:05 u01

Now i had started the installation again and once again unable to do this
i had seen the errors while checking the logfile created during installation
Statusstring Creating the database controlfile...
adcrdb.sh started at Fri Feb 22 21:37:23 UZT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/testdb/9.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u01/oracle/testdb/9.2.0/Apache/perl/bin:/u01/oracle/testdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/testdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /u01/oracle/testdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/testdb/9.2.0/ctx/lib
Executable : /u01/oracle/testdb/9.2.0/bin/sqlplus
The log information will be written to
     /u01/oracle/testdb/9.2.0/appsutil/log/TEST_machine1/adcrdb_TEST.txt
Creating the control file for TEST_machine1 database ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:37:33 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000 blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
exit_code=1
Checking for errors ...
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
ORA-01507: database not mounted
ORA-00205: error in identifying controlfile, check alert log for more info
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:39:16 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Cannot create control file for TEST
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for TEST instance

P6 R8.1 Web Service installation issue on Linux

We are trying to install P6R8.1 web services on weblogic in linux. We have the following setup:
1. Oracle 11g standard database in CentOS-5.4 64-bit
2. P6R8.1/ Weblogic 10.3.3.4 installed on CentOS 5.4 64-bit (separate server).
We have installed as per the oracle installation guide without any warning/ failure. After deploying the .war file (p6ws.war), it also showing Active in Weblogic admin console. But while trying to access the application (http://localhost:7001/p6ws) we are getting error: 403 Forbidden.
We have tested the weblogic by deplyoing some sample .war file and it works fine
After examining, we have found that there is no index.jsp file in the root of the p6ws.war file and it is only 29 mb compare to primaveraweb.ear file which is 194 mb of our existing installation (P6V7 with similar environment).
Is our .war file is not properly generated or we are missing some steps? Or there is any other issue?
Any help will be highly appreciated.
Best Regards,
Sandip

In previous versions the following was sufficient:
http://HOST:PORT/p6ws/
The correct URL as of version 8.0 of P6 Web Services is the following:
http://HOST:PORT/p6ws/services
See the following: "Error 403--Forbidden" When Attempting To View Available Services For P6 Web Services (Doc ID 1293112.1)

Oracle Installation Issue on Linux

When I execute runInstaller Command it's give's following Error...
"runInstaller: line 88: /usr/Software/database/install/.oui: Permission denied"
What would I do to resolve this issue....
Please Help me...
Tharaka

Refer & you can easily install linux
http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/
http://kamranagayev.wordpress.com/2010/04/25/video-tutorial-installing-oel-and-oracle-10gr2/

Installation issue with Linux 7.2

I am getting the following error message while installing Oracle 8.1.7 on Linux 7.2
Error in invoking target install of makefile
/home/oracle/OraHome1/network/lib/ins_net_client.mk
Any suggestion or help!!
Thanks

I'm having the same problem but with Linux 7.3 If you look at the make.log in
$ORACLE_HOME/install it will give you more information. I found my problem is
running $ORACLE_HOME/bin/genclntsh

ORACLE APPS 11i Installation

RW-50011 Error is coming while starting Apps 11i installation in linux(RHEL-ES)
with 30G for WindowsXP and 130G for Linux. I gave partition as 104G for Oracle,12G for root, 1.5G for Swapspace. I checked all the required RPMs to be installed. But while running the start CD I am getting an error.while completion of RDBMS - Disk 1, I am getting error RW-50004 Error. Kindly resolve this issue whoever has mastered over it.
I extend my gratitude in anticipation.
Awaiting reply
Vijay

Other people has had this problem before, you may want to check for it Re: Error RW50004/RW50011.
Most common solution for this issue has to do with the way ksh is being called from the path envrionment variable, and where the install script assumes where it is.
1. Make soft link of the file from /usr/local/bin/ksh to /usr/bin/ksh and before you start your installation start a session in a ksh environment.
or
2. Alter the search path used by the install script. Not advisable, as you are not suppossed to tamper with Oracle code.
or
3. Copy ksh From /usr/local/bin/ksh to /usr/bin
It is recommended to read the metalink this document Doc ID: 287453.1 "Oracle Applications 11.5.10 - Installation Update Notes for Linux x86 ...".

Problems loading standard forms in new 11i installation

Hi
Just installed the 11.5.10 Vision demo on SLES Linux on VMware. The installation went fine, and everything worked
I could access not only the portal, but the forms pages (after installing the supplied jInitiator package)
My problem is, after re-booting the server, everything works just fine (although I have to start up manually) EXCEPT I cannot now start any forms
When I click on a menu choice for any responsibility (say, System Administrator -> Concurrent Requests), jInitiator doesn't start up
I know the client (Windows XP) browser (IE 6) works fine with 11i, as I have accessed other 11i installations on the network without problem
Any pointers to where I should be looking ? It's obviously a server issue
Many thanks
Simon

Thanks for your help Yury, after checking through the processes and checking and re-checking the error logs, it turned out there was a problem with some of the environment variables
Once correcting that problem, everything starts up fine now. Strange that it only affected the forms server, but hey, it's all fine now

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

About "kernel.exec-shield" and "because they will bring security issue" for linux ASE

In " ASE Quick Installation Guide for Linux", "kernel.exec-shield=0" and “kernel.randomaize-va-space=0” should be set.
But SuSE engineers say that “kernel.exec-shield=0”and “kernel.randomaize-va-space=0” will bring the OS security issue.
Customer want to know why ASE need the above parameters ?
Has anybody the idea for customer's question?

If the parameters are not set as documented, attempts to start additional engines beyond the first one will fail, generating stack traces.
ASE acts in many ways like it's own operating system, scheduling individual user connections (spids) to actively run (note that ASE was developed well before native threading was commonly available). Each spid has it's own stack information that gets swapped in when it is set to "running" state on the engine and swapped out when it yields the engine. The mechanics of this is not that different from the buffer overrun exploits described in the Red Hat document linked to by the
install guide, http://www.redhat.com/f/pdf/rhel/WHP0006US_Execshield.pdf
and the exec-shield mechanics definatately interfere ASE's operations when ASE is using multiple dataserver processes (engines) that swap spids around.
-bret

How to install 11i on Red Hat Linux 64 bit

I'm having problems installing Oracle 11i on Red Hat Linux 64. I understand that it is not supported, however I need to go through the exercise of implementing OATM and then upgrade to 12.
I've started the install and I continue to hit this problem.
Any advise on how to get around this issue. Oracle Support insist on using 32bit. I do have a co-worker that has been able to install it on Red Hat 64bit.
Step 1 of 5
/DAT01/ebs/DataTop/visdb/9.2.0/temp/VIS_rac1/adrun9i.sh
Completed unzip 67 of 108
with 62% complete

Hi;
I'm having problems installing Oracle 11i on Red Hat Linux 64. I understand that it is not supported, however I need to go through the exercise of implementing OATM and then upgrade to 12. You mean oracle database 11g or you mean oracle e-business suite 11i? I am little confused
If you mention oracle database 11g than check below
What is exact linux version. Oracle 11gr2 certified wiht linux64. Please check:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
I've started the install and I continue to hit this problem.
Any advise on how to get around this issue. Oracle Support insist on using 32bit. I do have a co-worker that has been able to install it on Red Hat 64bit.
Step 1 of 5
/DAT01/ebs/DataTop/visdb/9.2.0/temp/VIS_rac1/adrun9i.sh
Completed unzip 67 of 108
with 62% completeIf you mention Oracle E-Busines suite than you can not install apps tier on 64 bit which is not supported.
Regard
Helios

OBIEE issues in Linux env

Too many BI processes running in Linux
OBIEE has been recently installed in the Linux box and the following are the issues that i am facing
1) When i list all the running processes in Linux i see the following entries:
5537 1 0 Jun27 ? 00:00:00 /bin/sh ./oc4j -start
5538 5537 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5539 5538 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5540 5539 0 Jun27 ? 00:00:01 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5541 5539 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5542 5539 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5543 5539 0 Jun27 ? 00:00:01 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5544 5539 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
5545 5539 0 Jun27 ? 00:00:00 /shared/jdk1.6.0_07/bin/java -Djava.library.path=/shared/OracleBI/server/Bin:/shared/OracleBI/web/bin -DSAROOT
13740 1 0 Jun27 ? 00:00:02 /shared/OracleBI/server/Bin/nqsserver -quiet
13741 13740 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13742 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13744 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13745 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13746 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13747 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13748 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13749 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13750 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
13751 13741 0 Jun27 ? 00:00:00 /shared/OracleBI/server/Bin/nqsserver -quiet
There seems to be too many similar processes that seem to be running at the same time, has anybody else faced a similar issue. Is this an installation issue?
2) Also we are not able to view the NQQuery log file too, when i try to open the log file from the Manage Sessions screen i get the following message
from the Admin --> Manage Session page.
Log Could Not Be Retrieved
Odbc driver returned an error (SQLExecDirectW)
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43100] Log Viewer process reported error 22:ÿÿ. (HY000)
the NQQuery.log file is present in the /OracleBI/server/Log path.
Please let me know if anybody has faced similar issues as above.
Edited by: user10980580 on Jun 28, 2010 12:07 PM

Pls find the session output.
[abc@xyz setup]$ which run-sa.sh|xargs ls -l
/usr/bin/which: no run-sa.sh in (/shared/jdk1.6.0_07/bin:/home/oracle/client/usr/oracle/10.2.0/TM_EAST/bin:/usr/sbin:/usr/bin:/bin:/usr/local/openssh/bin:/usr/X11R6/bin)
total 144
-rwxr-x--- 1 abc grp1 379 Jun 12 10:09 common.sh
-rwxr-x--- 1 abc grp1 132 Jun 12 10:09 installperfsas.sh
-rwxr-x--- 1 abc grp1 117 Jun 12 10:10 installperfsaw.sh
-rwxr-x--- 1 abc grp1 555 Jun 12 10:09 kill.sh
lrwxrwxrwx 1 abc grp1 33 Jun 12 10:07 oc4j -> /shared/OracleBI/oc4j_bi/bin/oc4j
-rwxr-x--- 1 abc grp1 1258 Jun 12 10:09 odbc.ini
-rwxr-x--- 1 abc grp1 4276 Jun 12 10:09 run-ccs.sh
-rwxr-x--- 1 abc grp1 4755 Jun 12 10:09 run-sa.sh
-rwxr-x--- 1 abc grp1 5407 Jun 12 10:09 run-saw.sh
-rwxr-x--- 1 abc grp1 4192 Jun 12 10:09 run-sch.sh
-rwxr-x--- 1 abc grp1 83 Jun 12 10:09 sa-cli.sh
-rwxr-x--- 1 abc grp1 83 Jun 12 10:09 sa-init.sh
-rwxr-x--- 1 abc grp1 119 Jun 12 10:09 sawserver.sh
-rwxr-x--- 1 abc grp1 509 Jun 12 10:09 saw.sh
-rwxr-x--- 1 abc grp1 1479 Jun 12 10:09 sysenvinit.sh
-rwxr-x--- 1 abc grp1 904 Jun 12 10:09 systunesrv.sh
-rwxr-x--- 1 abc grp1 134 Jun 12 10:09 uninstallperfsas.sh
-rwxr-x--- 1 abc grp1 122 Jun 12 10:10 uninstallperfsaw.sh
-rwxr-x--- 1 abc grp1 48675 Jun 12 10:09 UnixChk.sh
-rwxr-x--- 1 abc grp1 8637 Jun 12 10:09 user.sh
[abc@xyz setup]$ ./run-sa.sh stop
Shutting down Oracle BI Server.
[abc@xyz setup]$ sleep 30
[abc@xyz setup]$ ps -ef|grep nqsserver|grep -v grep|wc -l
0
[abc@xyz setup]$ ./run-sa.sh start
Oracle BI Server startup initiated.
Please wait for a while for the Oracle BI Server to completely start.
Execute the following command to check the Oracle BI Server logfile and see if it started.
tail -f /shared/OracleBI/server/Log/NQServer.log
[abc@xyz setup]$ sleep 60
[abc@xyz setup]$ ps -ef|grep nqsserver|grep -v grep|wc -l
121
[abc@xyz setup]$
Not sure if this is an issue with the BI or java installation

Oracle 9iAS Installation Issues, Win 2000

Hi Folks,
I'm trying to Install 9IAS on a WIN2000 PE.
I already have Oracle NT Personal Edition (download nt817personal), up and running.
My Question is do I need to use Oracle nt817ee (Enterprise Edition)
Any suggestions ?
Thanks

I agree with your 5 P's, but Oracle is killing themselves by not improving the installation issues. Oracle is in a fight to the death with Microsoft, and there are a lot of people who give up on Oracle products because the learning curve is too steep just to be able to login as Scott. I have a lot of experience with Windows and Oracle, and have installed the RDBMS on probably 50 separate machines in the last several years, yet I still cringe when I double click setup.exe since I never know if universal installer is going to abort. I'm not a Unix or Linux guru, and I tried and tried to get Oracle RDBMS 8i to install on several flavors of Red Hat, but I gave up. DB2 and Interbase both installed without the hassles. Take a look at the Linux forum on Technet, and look at the effort that some people are doing to try to get it to work. It should not be this hard. I would like to use Linux/Oracle on some of our servers, but frankly it is too hard currently. You shouldn't need a metal link account to install software on a clean install of Windows, or be a guru at writing device drivers for Linux to install Oracle on that platform.

11122 Installation Issue

We are trying to install 11.1.2.2 in Linux server, but we are not able to run Installtool.sh, any one has faced the same issue? we had installed 11121 in Linux, we didnt face any issue on linux, but in 11122 we are not getting GUI pop up windows to proceed with installation. its 64-bit server.
Please help.
Note: used x-windows to export display server and xclock is wrking fine.

thanks for the update, we are trying to run through -console option, installation done, but we r facing issues with configuration as its saying jar files missing, can you please help if any environment variables need to set up on linux for hyperion 11122, are we missing anything? please help.

11i installation problem on NT 4.0 SP6a

I have one 11i installation problem:
envoirment: NT 4.0 sp 6a MEM 394MB, cpu 550MHZ HD 40GB
install MKS, GNUMAKE (3.79), VC++, JDK 1.3 before Apps install.
And I could see which, gnumake.exe on DOS prompt. But the error
message say:
" which command is available; gnumake is not
available."
I already set the path varible path=C:\MKSTOO~1\bin;C:\MKSTOO~1
\bin\x11;C:\MKSTOO~1
\mksnt;C:\VStudio\Common\Tools\WinNT;C:\VStudio\Common\MSDev98
\Bin;C:\VStudio\Common\Tools;C:\VStudio\VC98
\bin;c:\make\WinDebug;c:\make\WinRel
How to fix this problem?
Any comments will be appreciated.

Actually, I already did this and found that this works correctly. I guess it
was the "install to d:\\weblogic600" that threw me off...
Thanks,
Robert
David Felts wrote:
Please add "\" after "d:"; this should work. We'll look at making this more
user-friendly for Beta 2.
Robert Patrick wrote:
I tried to install the current beta 1 version of WLS 6.0 today after
uninstalling the pre-release version that I had previously installed
with no problems. The problem is that when I try to set the "BEA home"
to the existing location ("D:" -- so that the product ends up in
D:\weblogic600), the installer claims that I do not have write
permission to that directory. This is hogwash since I am logged in with
administrative priviledges and was easily able to install the
pre-release copy like this (and yes, I have deleted the previous
directory).
Any thoughts?
Robert

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

11i Installation Issue in Linux

Similar Messages

Maybe you are looking for