1800 Update record found in SM13

Hi,
Iam getting more than 1800 Update record found in SM13 in Error status
please let me know how can i proceed as a basis admin
Should i inform the concern User mentioned in the log or i can delete all the entries.Expecting your response
                                                                                User:     M124356     Client:   750 Transaction:ZGS_CONV_NET
Date:     2010-11-07Time:     14:12:45Report:   SAPLBAPT
Update key:   4CD634CD613C002F000000008EB21A87Status: Error (no retr
Number Module name (function)         Type                 Status
1 PS_GUID_POST                   V1                   Initial
     2 ADDR_SAVE_INTERN               V1                   Initial
     3 ME_UPDATE_REQUISITION          V1                   Error (no retry)
     4 MEREL_POST_WFC                 V1                   Initial
     5 ME_CREATE_MRPRECORD_REQ        V1                   Initial
     6 HFPT_COEJA_PP_ORDER_RPSCO_V2   V2                   Initial
     7 STATUS_UPDATE                  V1                   Initial
     8 K_OPEN_ITEM_POST               V1                   Initial
     9 KBPV_POST_JA_VB                V1                   Initial
    10 HFPV_POST_RPSCO_V2             V2                   Initial
    11 OBJECT_NUMBER_INSERT_GENERIC   V1                   Initial
    12 PRJ_BTE_TRANSFER               V1                   Initial
    13 CO_VB_ORDER_POST               V1                   Initial
    14 K_COSPA_MODIFY                 V1                   Initial
    15 K_COSSA_MODIFY                 V1                   Initial
Thanks,
Guru

Hi,
Firstly, please check whether was there any recent transport containing changes relating to the ZGS_CONV_NET tcode or the below standard report imported into this system leading to inconsistencies.
Also, please check space critical objects in DB02.
Also, check the update status in SM13, it should be "Active".
Finally, Contact the user M124356 and ask him/her as to what are they doing with the Z tcode. You might get a clue over there.
Hope this helps. Try these and let me know.
Regards,
Hari Kishan

Similar Messages

Update termination record found in SM13 - material document posting error

Hi All,
A record was found in SM13 relating to missing material document and accounting document. When 'update header' button is clicked in SM13 selecting that record, the resultant pop up shows report name SAPLZ2K_MB_BUS2028. And when 'update status' button is clicked it shows error description '00 671: ABAP/4 processor: LOAD_NO_ROLL'.
Since update was termianted, the material document could not be found in database though MSEG entries in SM13 shows that material document number.
Help required to interpret the above scenario and what could be the root cause for the update termiantion.
Regards
JB

Hi,
Firstly, please check whether was there any recent transport containing changes relating to the ZGS_CONV_NET tcode or the below standard report imported into this system leading to inconsistencies.
Also, please check space critical objects in DB02.
Also, check the update status in SM13, it should be "Active".
Finally, Contact the user M124356 and ask him/her as to what are they doing with the Z tcode. You might get a clue over there.
Hope this helps. Try these and let me know.
Regards,
Hari Kishan

SM13 - Error in Collect.Run - Yellow status update records.

Hello,
After some problems with update queues in R/3, we have some update records in yellow status "Error in collective run" in sm13 t-code.
If we run collective run, new records are pushed into rsa7, but this yellow status records won't move, and we actually need them.
Does anyone know how to process this errors?

Hi,
There is no problem with background process, the new update records are being processed with no problem.
These update records remain in yellow status since yesterday, but new records are being processed.

While updating J1INBANK No records found.

Dear All,
We have made TDS remittance through J1INCHLN and while doing J1iNBANK no records found in table J_1IEWTCHLN for a particular company code. But the TDS Payment document is appearing in FB03. We are in ECC 6.0.
If anybody knows please let me the reason why the table J_1IEWTCHLN is not getting updated once TDS Payment is done.
Thanks in advance
Regards / Paul

Dear Mr. Joshi,
There are documents since Nov'2009 and till now I know the document numbers. But while doing J1INBANK if you enter the document number, the system says " no document found" OR if you press F4 to select available documents, for a given company code there is no records available. At the same time there are records for other 30 company codes in the client.
My question is, am i missing any configuration for this company code. Because none of a record pertaining to TDS Payment is not found in the table J_1IEWTCHLN, which were generated through tcode: J1INCHLN.
Do you think any config missing relevant to this portion.
Thanks & Regards,
Paul

Error -2028 Update No matching records found (ODBC -2028)

An apology for my English, I'm trying to update a field but I get this error:
No matching records found (ODBC -2028)
This is part of the code that I use to add new ones and works fine, when I change the oItems.Add (); by oItems.Update () does not work.
public static void addItem(DataRow itemObject)
   oItems = (SAPbobsCOM.Items)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oItems));
   oItems.ItemCode = itemObject["ItemCode"].ToString();
   oItems.ItemName = itemObject["ItemName"].ToString();
   lRetCode = oItems.Add();
   if (lRetCode != 0)
      oCompany.GetLastError(out lErrCode, out sErrMsg);
I get the data from MySql, and I tried putting the data manually from an existing record and does not work
Any ideas why?

Hi,
Before you can call Update on an item you need to call the GetByKey method to retrieve the item you want to update:
public static void updateItem(DataRow itemObject)
   oItems = (SAPbobsCOM.Items)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oItems));
   if(oItems.GetByKey(itemObject["ItemCode"].ToString())
        oItems.ItemName = itemObject["ItemName"].ToString();
        lRetCode = oItems.Update();
        if (lRetCode != 0)
                oCompany.GetLastError(out lErrCode, out sErrMsg);
Kind Regards,
Owen

Need help to insert and update records in MDM

Hi ,
I am trying to develop an webdynpro application which can create and update records in tables of a repository of MDM . For example .. I want to insert values and later update values in Vendor table.
I am new to webdynpro and MDM. If any one can help step by step or can send a sample code which I can be ready to use that would be great help.
If anyone can have a sample code .. kindly mail to "[email protected]"
It is urgent. Please help.
Regards,
Niraj
Edited by: Niraj Kumar on May 23, 2008 6:50 AM

Hi Niraj,
Are u going to work with webdynpro Java/ABAP?
some materials which are found useful are sent.
Cheers,
Mary

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Getting the error "Error while trying to update record" when I try to force complete a plan in DAC

Hello Everyone ,
I am using OBIA 7.9.3.7 . One of my execution plan has finished executing all the tasks but it is still in running mode . When I try to force complete it , it gives the error " Error while trying to update record" . Upon checking the log file , I found the below errors :
MESSAGE:::ORA-04092: cannot COMMIT in a trigger
ORA-06512: at "DAC_CUSTSCM.ETL_FAIL_NOTOFICATION", line 9
ORA-04088: error during execution of trigger 'DAC_CUSTSCM.ETL_FAIL_NOTOFICATION'
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
The Plan is in running state for past couple of days . I tried to re-start the DAC services , but again it gave the same error . Kindly suggest .
Regards
Satyendra

Just to correct , the version of obia is 7.9.6.3

Duplicate records found while loading master data(very urgent)

Hi all,
One infopackage in the process chain failed while laoding the master data(full update).Its showing the following error-->duplicate record found ..1 record used in /BI0/PTCTQUERY and the same record occured in /BI0/PTCTQUERY tables.
can anyone give me the solution...its very urgent...
Thanks & Regards,
Manjula

Hi
You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
Help says that:
To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
hope it clears ur doubt, otherwise let me know.
Regards
Kiran

Get error ORA-20505 and ORA-01403 when UPDATING record

Hi,
I'm running APEX 3.2.1, on Oracle XE 10.2.0.1, on Sun Ultra20 (Intel-based) running Windows Server 2003.
I created a small, department database - to keep track of contacts, equipment, etc.
Initially, I used a NUMBER as the PRIMARY KEY in both the CONTACTS table and EQUIPMENT tables. I created a CONTACTS interactive report and a CONTACT DETAILS form, where the EDIT button on a row in the CONTACTS report brings up the individual record to modify. Same thing for EQUIPMENT - interactive report page and form page.
This all worked fine!
Then, I decided to change the PRIMARY KEY for the CONTACTS table to a STRING - with CONTACT_FIRST_NAME and CONTACT_LAST_NAME as the primary key. I figured I this would prevent duplicate entries. After the change, inserts work. Updates work, IF a change is made to ANY field EXCEPT first name or last name.
UPDATES fail - if user modifies EITHER the first name or last name - in APEX. But, update SUCCEEDS if done in SQL Developer. Obviously, I missing a subtle nuance in APEX, but I can't figure it out.
I've included DEBUG trace and version information below.
Thanks,
Andy
ORA-20505: Error in DML: p_rowid=Adam1, p_alt_rowid=CONTACT_FIRST_NAME, p_rowid2=Adam, p_alt_rowid2=CONTACT_LAST_NAME. ORA-01403: no data found
0.02: A C C E P T: Request="SAVE"
0.02: Metadata: Fetch application definition and shortcuts
0.02: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
0.02: alter session set nls_language="AMERICAN"
0.02: alter session set nls_territory="AMERICA"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -06:00
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
0.02: ...NLS: Set date format="DD-MON-YYYY"
0.03: Fetch session state from database
0.03: ...Check session 1896858759858984 owner
0.03: Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
0.03: ...NLS: Set date format="DD-MON-YYYY"
0.03: ...Check for session expiration:
0.03: ...Metadata: Fetch Page, Computation, Process, and Branch
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 101, page 21
0.05: ...Validate item page affinity.
0.05: ...Validate hidden_protected items.
0.05: ...Check authorization security schemes
0.05: Session State: Save form items and p_arg_values
0.05: ...Session State: Save "P21_CONTACT_FIRST_NAME" - saving same value: "Adam"
0.06: ...Session State: Saved Item "P21_CONTACT_LAST_NAME" New Value="Adam Jr"
0.06: ...Session State: Save "P21_CONTACT_COMPANY" - saving same value: "Atempo"
0.06: ...Session State: Save "P21_CONTACT_JOB_TITLE" - saving same value: "Sr Sw Engr"
0.06: ...Session State: Save "P21_CONTACT_JOB_ROLE" - saving same value: "Engineering"
0.06: ...Session State: Save "P21_CONTACT_STATUS" - saving same value: "Active"
0.06: ...Session State: Save "P21_CONTACT_PRODUCT" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_PHONE" - saving same value: "222-333-4444"
0.06: ...Session State: Save "P21_CONTACT_MOBILE" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_FAX" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_EMAIL" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_STREET" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_CITY" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_STATE" - saving same value: "CO"
0.06: ...Session State: Save "P21_CONTACT_ZIP" - saving same value: ""
0.06: ...Session State: Save "P21_CONTACT_COUNTRY" - saving same value: "United States"
0.06: ...Session State: Save "P21_CONTACT_NOTES" - saving same value: ""
0.06: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.06: Branch point: BEFORE_COMPUTATION
0.06: Computation point: AFTER_SUBMIT
0.06: Tabs: Perform Branching for Tab Requests
0.06: Branch point: BEFORE_VALIDATION
0.06: Perform validations:
0.08: ...Item in validation equals expression 2: P21_CONTACT_JOB_ROLE
0.08: ...Item in validation equals expression 2: P21_CONTACT_STATUS
0.08: ...Item Not Null Validation: P21_CONTACT_PHONE
0.08: ...Item in validation equals expression 2: P21_CONTACT_STATE
0.08: ...Item in validation equals expression 2: P21_CONTACT_COUNTRY
0.08: Branch point: BEFORE_PROCESSING
0.08: Processing point: AFTER_SUBMIT
0.08: ...Process "Process Row of ISR_CONTACTS": DML_PROCESS_ROW (AFTER_SUBMIT) #OWNER#:ISR_CONTACTS:P21_CONTACT_FIRST_NAME:CONTACT_FIRST_NAME:P21_CONTACT_LAST_NAME:CONTACT_LAST_NAME|IU
0.08: Show ERROR page...
0.08: Performing rollback...
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database
NAME     XE
CREATED     06/08/2010 05:22:50 PM
RESETLOGS_TIME     07/09/2010 10:09:59 AM
PRIOR_RESETLOGS_CHANGE#     193066
PRIOR_RESETLOGS_TIME     06/08/2010 05:22:52 PM
LOG_MODE     ARCHIVELOG
CHECKPOINT_CHANGE#     4436025
ARCHIVE_CHANGE#     4387159
OPEN_RESETLOGS     NOT ALLOWED
VERSION_TIME     07/09/2010 10:08:44 AM
OPEN_MODE     READ WRITE
PROTECTION_MODE     MAXIMUM PERFORMANCE
PROTECTION_LEVEL     MAXIMUM PERFORMANCE
REMOTE_ARCHIVE     ENABLED
DATABASE_ROLE     PRIMARY
ARCHIVELOG_CHANGE#     4458138
SWITCHOVER_STATUS     SESSIONS ACTIVE
DATAGUARD_BROKER     DISABLED
GUARD_STATUS     NONE
FORCE_LOGGING     NO
CGI Environment
PLSQL_GATEWAY     WebDb
GATEWAY_IVERSION     2
SERVER_SOFTWARE     Oracle Embedded PL/SQL Gateway/10.2.0.1.0
GATEWAY_INTERFACE     CGI/1.1
SERVER_PORT     8080
SERVER_NAME     XDB HTTP Server
REQUEST_METHOD     GET
QUERY_STRING     p=4500:36:1896858759858984:::::
PATH_INFO     /f
SCRIPT_NAME     /apex
REMOTE_ADDR     10.135.65.180
SERVER_PROTOCOL     HTTP/1.1
REQUEST_PROTOCOL     tcp
REMOTE_USER     ANONYMOUS
HTTP_USER_AGENT     Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19 (.NET CLR 3.5.30729)
HTTP_HOST     isr-si-project:8080

Maybe because you're changing primary key...and then updating record with primary key that doesn't exist.

Problem with update record, then link to file

Environment:
Dreamweaver 8, MySQL, PHP.
I have a repeating record from my database. I added an Update
Record server behavior for each search result for the result table.
I added a button to the form and changed "submit" to "view".
Pressing "view" is supposed to allow the user to view the detailed
record information.
The Update Record server behavior is supposed to do two
things:
1) add 1 to the 'numViews' filed of the record's database
entry when the "view" button is pressed
2) After updating the numViews field, the form is supposed to
redirect the user to the detailed record
I found that depending on how I create the record, I an do
one of the above 2 behaviors, but not both. HELP!
To add 1 to the numViews field, I created a form variable
called incNumViews, which does the following:
<?php echo $row_rsSearchResults['recipeNumViews']+1; ?>
Very simple.
The Update Record ends up changing the form action to the
following:
<?php echo $editFormAction; ?>
Looking at the code for this, I ee the following:
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
But when the "view" (ie: submit" button for the form is
pressed, I get redirected back to the same repeating record search
result page, not to the record detail page.
However, the numViews field in the record is getting properly
incremented.
I tried to get around this by changing the Update Record
behavior "After updating, go to:" field to point to the record
detail page, and tried passing a parameter tot he recordID I want
to see details of, as a URL parameter, but that does not work.
If I change the Update Record form action from
<?php echo $editFormAction; ?>
to
record_detail.php?recordID=<?php echo
$row_rsSearchResults['recordID']; ?>
Then I am able to link to the detail page, but NOT update the
numViews field.
HOW can I fix this to both update the record, then jump to
the detail page with a URL parameter being passed, when I click the
"view" (submit) button o the form??
Thanks in advance.

If the user's computer doesn't know what to do with a TIFF file, I guess that Open button would be missing. Tiff is not a web normal file format, or even a common one for graphics applications....

No update server found for context :e:

i have sap netweaver 7.0 abap trial version on my machine. i have navigated to se80 and write a program while walking with this weblog :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6270 [original link is broken] [original link is broken] [original link is broken]
the program is called z_hello_world_local :
REPORT Z_HELLO_WORLD_LOCAL.
data output_text type string.
output_text = 'Hello World'.
write output_text. "obsolete statement
any way when i have tried to save or run the program it returns the error:
no update server found for context :e:
also i must say that <u><b>when i clicked the as abap wp table, on sapmmc, the work processes like dia, upd, enq, btc, spo seem not to be worked ("no" in the line under start title). only the first dia works (it has a yes under start)</b></u> what can i do for this second problem?
any ideas?
thanks
Edited by: developer developer on Aug 23, 2008 5:40 PM
Edited by: developer developer on Aug 23, 2008 6:26 PM
Edited by: developer developer on Aug 24, 2008 10:06 AM

I came trough the same problem...This forum post might help you -;)
[Software Downloads;
Transaction SM13 is the key -;)
Greetings,
Blag.

Integrity constraint child record found

TopLink Version: Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 070323)
I may be going crazy here, but I keep getting an integrity constraint when I try to delete an object that has 1:M relationship (Resource 1:M Attribute):
Internal Exception: java.sql.SQLException: ORA-02292: integrity constraint (WEBCENTER.WP_RELATIONSHIP_RES_FK) violated - child record found
The child object attribute is set to "Private Owned", and there is an FK from the child table to the parent table in the database (this is where the integrity constraint violation is coming from).
I query for the Resource, register it in the unit of work, call UOW.deleteObject(resource), and then call UOW.commitAndResume(). TopLink is making a sql call to delete the Resource, but it does not first delete the privately owned Attributes which results in the FK violation.
It should delete the child records first, right?
In addtion to having the attribute set to "Private Owned", I also have set:
Batch Reading
Use Indirection
Transparent
Not sure if that makes a difference.

Use a trigger. Example:
CREATE OR REPLACE TRIGGER update_parent_chilren
BEFORE UPDATE OF pkey_column ON parent_table
FOR EACH ROW
BEGIN
UPDATE child_table
SET fkey_column = :NEW.pkey_column
WHERE fkey_column = :OLD.pkey_column;
END update_parent_children;
null

Update record error message

Hello Group,
Apex 3.0
I get an error when I try to update a field in the Master-Detail form (where both Master and Child records are on the same page) but only on the Master record. If I make changes to the Child records I have no problems.
Here is the error message:
ORA-20001: Error in DML: p_rowid=185, p_alt_rowid=MULTIYEAR_CONTRACTS_ID, p_rowid2=, p_alt_rowid2=. ORA-02292: integrity constraint (XXUTPA_BA.RENEW_OPT_CON) violated - child record found
I'm not sure if it is because the p_rowid2 and p_alt_rowid2 are blank (null) or if it is something else.
Thanks

psalmu,
is this what you were looking for?
CREATE TABLE "MULTIYEAR_CONTRACTS"
(     "MULTIYEAR_CONTRACTS_ID" NUMBER(3,0),
     "VENDOR_NAME" VARCHAR2(40),
     "DESCRIPTION" VARCHAR2(80),
     "ORIGINAL_PRICE" NUMBER(10,2) NOT NULL ENABLE,
     "NUM_RENEWAL_OPTIONS" NUMBER NOT NULL ENABLE,
     "START_DATE" DATE NOT NULL ENABLE,
     "ABSOLUTE_END_DATE" DATE NOT NULL ENABLE,
     "NOTES" VARCHAR2(255),
     "DEPARTMENT" NUMBER,
     "ACCOUNT_NUM" VARCHAR2(10),
     "TYPE_OF_CONTRACTS" VARCHAR2(3),
     "CONTACT_PERSON" VARCHAR2(20),
     "CONTACT_EMAIL" VARCHAR2(30),
     "CONTACT_PHONE" VARCHAR2(14),
     "BUYER_CODE" VARCHAR2(3),
     "CONTACT_PURCH" VARCHAR2(1),
     "INACTIVE" VARCHAR2(1),
     "UOM" VARCHAR2(10),
     "ORIGINAL_PO_NUM" VARCHAR2(10),
     "RENEW_OPT_REMAIN" NUMBER,
     "NOTIFICATION" NUMBER(1,0) NOT NULL ENABLE,
     CONSTRAINT "MULTIYEAR_CONTRACTS_CON" PRIMARY KEY ("MULTIYEAR_CONTRACTS_ID") ENABLE
CREATE TABLE "RENEW_OPT"
(     "RENEW_OPT_ID" NUMBER NOT NULL ENABLE,
     "MULTIYEAR_ID" NUMBER NOT NULL ENABLE,
     "MAX_ESCALATION_PER_YEAR" NUMBER(4,2) NOT NULL ENABLE,
     "PREV_PO_NUM" VARCHAR2(15),
     "FY_START_DATE" DATE,
     "FY_END_DATE" DATE,
     CONSTRAINT "RENEW_OPT_PK" PRIMARY KEY ("RENEW_OPT_ID") ENABLE
ALTER TABLE "RENEW_OPT" ADD CONSTRAINT "RENEW_OPT_CON" FOREIGN KEY ("MULTIYEAR_ID")
     REFERENCES "MULTIYEAR_CONTRACTS" ("MULTIYEAR_CONTRACTS_ID") ON DELETE CASCADE ENABLE
CREATE SEQUENCE "MULTIYEAR_CONTRACTS_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 271 CACHE 20 NOORDER NOCYCLE
CREATE OR REPLACE TRIGGER "MULTIYEAR_CONTRACTS_T1"
BEFORE insert or update or delete on "MULTIYEAR_CONTRACTS"
for each row
begin
select MULTIYEAR_CONTRACTS_SEQ.nextval into :NEW.MULTIYEAR_CONTRACTS_ID from dual;
end;
ALTER TRIGGER "MULTIYEAR_CONTRACTS_T1" ENABLE
/

1800 Update record found in SM13

Similar Messages

Maybe you are looking for